Balance Leaves to be carried forward to next year
HI Experts,
I am using Time evualation with -ve time , i want to carry fwd all the balance leaves left for the year to the next year.
I have set the "Permit Quota Generation in Time Evaluation" node to "Increase". However i am not able to meet the requirement. Please let me know if i have to maintain any other table or should i have to write PCR for this
Regards
Kanna
You have to write Pcr's for reading the balances and to carry forward the Leaves to quotas.
PCR for Reading Balances.
hrs= Bcurmo
hrs?(specify the month on which it has to read the balance)
=
hrs=Bcurdy
hrs?(Last day on/after which it has to read the balance)
=
OUTAQTYP
XX (XX:Mention Absence Type)
hrs=FR C
addMBXXXX(Time type 4-digit)z
_PCR for Carry forwarding the Leaves.
hrs= Bcurmo
hrs?(specify the month on which it has to get the balance)
=
hrs=Bcurdy
hrs?(Starting day to get the balance)
=
hrs=Mxxxx(Time type which we maintained in above PCR
updtqAxx(Absence which it has to carry forward)
Where
A-Syntax
B-Syntax
curmo-Current Month
curdy-Current Day
F-Syntax
R-Remaining
C -Syntax
MB-Monthly Balance
z-Replacing Value.
Check and revert with your Comments
Experts:Correct me if am wrong.
Regadrs,
Rao
Similar Messages
-
How to carry forward budget next year for single wbs element
Hi,
i want to carry forward budget next year for single wbs element.
pl suggest me.
Thanks & Regards
Purna.MHi,
Go to CJCO click on Dynamic Selection and in master data of WBS element select No of person responsible and give the person responsible and execute.before that maintain no of person responsible in that specific WBS element.
hope it will solve ur problem.
Regards
Avinash -
Retained Earnings Account balance not carry forwarded to next year
Hi,
We have problem in Retained Earnings Account Balance C/F to next year
example:
G/L Account closing balance in 2008 - 1000.00 (as per FS10N) after c/f balances to 2009
G/L Account Opening balance in 2009 - 850 (as per FS10N) (there is a difference 150.00)
If we double click on Cumulative balace of 850 it will give us - 1000.00 and if we see in report : FBL3N it will show correct balance. Only FS10N is not showing correct balance.
Can you please let us know what will be the reason ?
Thanks
RaviHi Ravi,
We are using 4.6C version and last few years there was no problem and we have other company codes which are showing correct balance. But only one company code this difference is coming.
If we double click the FS10N report opening balace it will give us the correct balance. But in display there is showing less amount.
Thanks -
Absence Quota Carried Forward to Next Year
Hi All
hope you are doing well. I was looping around for carry forward remaining absence quota from one year to next year
Requirement:
Absence Quota for 20 days generated from 01.01.2012 to 31,12.2012, deducted 4 days on december 2012
but absence quota to next year i.e from 01.01.2013 to 31.12.2013 is showing as 20 wherein actual should be 16
Followed Woods documents at Carry Forward Absence Quota but failed
Configuration of Time Types, PCR and Schemas as folows, request your kind attention at earliest as its business critical
Configured a constant at T511k
Created two time types
For Quota
For carry forward
PCR as follows
Schema
Request your kind attention on the same, helpful/ right answers will be rewarded with points
BR
Anil
Message was edited by: Sikindar AHi Anil,
I just had a quick look at the PCRs and I think some things are wrong.
First of all ZCMO controls if it's the last day of last month or not. If it is the schema will go through ZCFL.
ZCFL reads the remain part of quota type 20. Please make sure you quota type is correct. I mean it's 20. I assume quota type is correct. PCR checks if remain of quota is equal or great than 20 then it put 20 into time type 0904.
Until here you will have remain part of quota at last day of last month in time type 0904.
Now you need a PCR to control if the date is first day of first month (01.01) reads value of 0904 and through a quota generation rule of V_T559L generate quota.
I don't understand what ZCFT is for!
Regards,
Omid -
Error in Asset Value carry forward to next year
As a regular periodic process of Month/Year closing activities in SAP, Asset Year 2015 was opened and then closes the year 2014 and carried forward the Asset values to the year 2015. But unfortunately some of the Asset value had not been transferred to the year 2015. As a result, Depreciation had not been charged for those Asset for the year 2015. Need to transfer the Asset value to the current year immediately. Can any one help me regarding the problem ? The APC Start value is showing in the year 2014 but its not showing in 2015.
The Closing value of Current APC of year 2014 does not match with the Opening value of the APC Start, so what should be the possible reasons for that ?Hi Erika,
I did that on last January 2015. First i use the T-code: AJRW for the Fiscal Year Change and then T-code: AJAB - for Year end-closing Asset Accounting as i did that for last 4 years. Though there was as error message indicating error in depreciation calculation, our consultant assured me that that will not create any problem. The Error was like below:
600981 0 Secretariat Table 2014 Error in dep. calculation -
Sales and purchase journal - balance carry forward to next page
Hi all,
When we run sales and purchase journals in transaction S_ALR_87012357 (Belgium) and print it we want a summary per page and balance carry forward to next page.
The paging is correct by selecting "statistical info not printed" in output control but we don´t want only summary on last page, instead on every page and a total summary on last page.
Does anyone knows how to mangage this?
Best regards LisaWith a developer implement a the BADI FI_TAX_BADI_010
-
Budget balance carry forward to new year fiscal year
Hi,
Currently, our setting for Funds Management Master
Data is year-dependant. Now, our user request for a budget carry
forward from one year to another year. So, we are trying to the fix the
configuration.
My question is, can we do the budget balance carry forward if the master data is year-dependant. If can, how to do that?
For your information, our system is SAP R3 version 4.7C and using the BCS.
Appreciate your advise on this matter.
Thanks and regardsHi,
copy cost center planning:
kp97 - copy plan to plan
kp98 - copy actual to plan
Internal order copying
ko14 - copy plan to plan
ko15- copy actual to plan
all the best
prasad -
Fields "Used " upon Leave Request show carry forward instead of al
Dear all,
Staff have apply 1 days annual leave. However when the staff submit leave request via
ess, fields "used" in leave request show carry forward leave insteqad of annual leave .
The staff have carry forward but have fully utilize it before his apply the leave.
Is there any config can I check why the fields show carry forward?TQit is the same as per backend customisation
ie T554s absence is connected to which absence quota to deduct using a deduction rule V_556R_B
(T556C), Please verify. -
If I enter birthdays into my diary will they automatically be carried over to next year
If I enter birthdays into my diary will they automatically be carried over to next year or will I have to enter them all again.
Hmm.... When in year view, the birthdays only show up through 2014 like I said. But if I go into any other view, they do show up as expected. So much for year at glance help.
Maybe my calendar knows that at my age I'm not likely to be celebrating anybody's birthday beyond 2014! Yikes! Sure hope that's not the case. -
Carry forward to next fiscal year G/L balances shopwing Difference
Dear Sapgurus,
I am trying to carry forward the gl balances for 2009 to 2010 in the tcode f.16 i got differences and then i used the tcode faglgvtr for ECC. 6.0. Still i am getting balance differences in the fiscal year 2010.
Please anyone Provide me how can i clear/correct the gl balances.
regards,
TirupatiDear Ravi,
Thanks for your replay.
Actually now we are in 2012 fiscal year. the documents are posted in 2010 fiscal year 13th period. It is not suggestible to do carry farrowed from 2010 to 2011 fiscal year because of the reports were already submitted.
We have done testing in quality system that reversed the posted documents by giving the same dates and later we did the f.16 to carry farrowed from 2010 to 2011. Then the balance was became "0" at 2011 fiscal year beginning. But it is not suggestible in production.
Could you please suggest any alternative solution or any correction program.
Regards,
Mr. Rao -
Balance Carried Forward for a Year
Hi,
Can anyone tell me if there is any table where the carry forward balance for a particular year is stored?
I checked LFC1 table but it is not storing data consistently for all vendors.
For some vendors the balance is correct, while for others it is not.
Thanks in Advance,
ShivaliHi Shivali,
Have you looked table <b>BSIS</b> for open items?
Please check also this link perhaps it may help.
http://www.sapgenie.com/abap/tables_fi.htm
Regards,
Ferrty Lianto
Please reward points if helpful. -
Time Base / Carry Forward / Copy Last years balances
Hi Experts,
Can anyone throw light on how would the TIME=BASE function as used in the script below help in carry forward ?
Is the below syntax correct ?
*XDIM_MEMBERSET DATASRC=%MyDataSrc%
*XDIM_MEMBERSET TIME=BASE,%TIME_SET%
*XDIM_MEMBER ACCTDETAIL=%TFCLO% TO %TFBEG%
*WHEN TIME
*IS BASE
*WHEN ACCOUNT.ACCTYPE
*IS "AST","LEQ"
*REC(TIME="%TIME_SET%")
*ENDWHEN
*ENDWHEN
*COMMIT
Regards,
Pankti ShroffHi
I am also facing an issue with this script in 7.0 version.
I am trying to arrive at the difference if 2 dparent account (Current accounts ) for Cash flow analysis by using the below script
*XDIM_MEMBERSET measures = YTD
*XDIM_MEMBERSET CATEGORY = ACTUAL
*XDIM_MEMBERSET ACCOUNTL =<ALL>
*CALC_DUMMY_ORG ACCOUNTL=PARENTH1
*WHEN ACCOUNTL
*IS #211
*REC(EXPRESSION=-GET(ACCOUNTL="#211",TIME=BASE)+%VALUE%,ACCOUNTL="CF_0015",ACCTDETAIL="F_NONE",DATASRC="INPUT")
*ENDWHEN
*COMMIT
This does not pick up any value as available in Mar'08 (prev year -- i have Apr to Mar as the accounting year)
Pl let me know if there is some error on this script logics and how can i best work it out
Regards
Manoj -
How to carry forward RE prior year for each period?
Hi,
I have a Retained Earning (RE) prior year. How do i carry forward the opening balance for each period?
I have tried to use the copy method (using the same version but copy from period 1 to 2) however encountered message stating that " Posting in identical currencies: Amount disagree".
Please advise.
Regards, ReneeRenee,
What has remained unclear
how SEM BCS handled balance carried forward?
Re: BCS Calculation for retained earnings -
Commitment Carry Forward in the year end closing!
Hi All,
We have a lot of open PRs and POs against Internal orders and WBS at the year end and we also have the budget control activated. Now we are going to do the year end closing. My question is:
1. Who should do the commitment carry forward, supply chain or FI team?
2. If supply chain will do the PR or PO carry forward, will FI team also need to run the commitment carry forward (KOCF or CJCF) from FI side at the same time or not necessary?
Thanks,
TingHi Abhinay,
Thanks for the answer.
When you say they have to perform year end activities like checking PO and PR, what actually they are doing? Do they just need to check whether those PO or PR are required (if not, close them) or they need to do something more? . As far as I know, no steps like checking PO and PR are required here. So I am wondering whether we have missed anything or not. Can you give me some details about that step?
Also, if we are using only Total value for the budget, not annual value, I don't need to do the budget carry forward closing step. In this case, do I need to do the commitment carryforward step?
Thanks,
Ting -
InputProcessor attributes are carried forward to next presentation page
I am using WebFlow with my application. After an InputProcessor completes successfully
and is fowarded to the next presentation page, the wfevent from the InputProcessor
(and also other attributes from the InputProcessor event) are appended to the
URL of the next presentation page. This causes errors when the user refreshes
the current page, the prior InputProcessor is invoked again because attributes
from the InputProcessor are still present on this page. Why does this behavior
occur? How can I prevent this from occurring?Hi Anil,
I just had a quick look at the PCRs and I think some things are wrong.
First of all ZCMO controls if it's the last day of last month or not. If it is the schema will go through ZCFL.
ZCFL reads the remain part of quota type 20. Please make sure you quota type is correct. I mean it's 20. I assume quota type is correct. PCR checks if remain of quota is equal or great than 20 then it put 20 into time type 0904.
Until here you will have remain part of quota at last day of last month in time type 0904.
Now you need a PCR to control if the date is first day of first month (01.01) reads value of 0904 and through a quota generation rule of V_T559L generate quota.
I don't understand what ZCFT is for!
Regards,
Omid
Maybe you are looking for
-
HI Gurus, You might help us,weI need your strategical inputs. We have our 2nd company code SAP Roll-out, however the project stop. Migration was done way back July 2011.. and now 2012 they wanted to continue. What would be the best strategy to do in
-
ABAP dump while running the tcode MIGO
Hi All, I am getting the abap dump while running the tcode MIGO when I searched I got two relevant sap notes but our functional team said that its not applicable in our case. Please find the details of ST22 analysis-: Runtime Errors MESSAGE_T
-
Color Profile on a MacBook Pro
Hi all, I'm a novice user of Aperture and a novice user of Digital image processing as well ... so, as usual in this case, i apologize if everything i'm gonna ask, or a part of it , has been discussed in depth yet ... please point me there I have a m
-
Can asset be deleted after some transactions are posted and completely depr
Hi Gurus, Can the asset be deleted if there is any transaction happened this year? The asset is depreciated in august completely. Now, I don't want that to reflect on my system. Please suggest me with some options. I have blocked the asset temporaril
-
I post my web on an account other than .MAC. My question concerns updating a web page's content. I have many pdf and doc files that I link to within my site. The reside in iWeb created folders. When I change the content of a pdf or doc file and just