Balancing Field BA in line item no Filled

Dear Experts,
We have configured Business Area/Profit center/ Segment as characteristics of Doc. Splitting and have created Substitution rule using BSEG table to Fill in BA using Plant Field (WERKS - as Plant and BA are identical) in Balance Sheet GL a/c line items when BA is missing in automatically generated line items.
Unfortunately there are Automatically Generated Line items without Both BA & Plant so i can't create the substitution rule for this line item directly.
Therefore we are getting an error messages for such line item as mentioned above.
Pls. kindly help how to resolve this issue. Urgent!!! Is there any formula i can use in substitution.
Thanks & Best Regards,
Aziz

Hi.. experts,
Any help?
Best Regards,
Aziz

Similar Messages

Balancing field "fund" in line item not filled

Hi all,
We are getting this error "balancing field 'fund' in line item xxx not filled when we try to post a goods issue. Everything in fmderive and document splitting rules seem to be fine.
Please let us know.
Thanks.

Hello Roger, do you have this note in your system?
[1157202|https://service.sap.com/sap/support/notes/1157202]
Additionally, you can also simulate the splitting of your document via
transaction FAGL_MIG_SIM_SPL , and see if all your settings are ok.
let us know if this helps
best regards
Mar

Balancing field "Segment" in line item 001 not filled while posting through

HI All,
I am experiencing the below error while processing FB70 transaction in Foreign currency with Tax codes (earlier this problem was not there, this is happening recently). The error description as given below.
"Balancing field "Segment" in line item 001 not filled
Message no. GLT2201
Diagnosis
The field Segment marked as balancing is not filled with any value in line item 001, even after document splitting.
System Response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this business purpose."
I have verified all the relevant settings like Classify G/L accounts for document Splitting and Document types etc and all settings are seems to be ok.
But in the below two instances, Iu2019m not getting any error:
If posting is done in company code currency with same tax codes.
If posting is done in foreign currency without tax codes
Your early respons is highly appreciated. Thanks in advance.
Thanx & Regards
Ramesh

Hello
Have you chosen Segment as Mandatory for the Scenarios during Document splitting. If not then for the G/L account you are facing problems with goto the field status and make segment field optional.
Thanks and Regards

Balancing field "Segment" in line item 001 not filled

Hi Viewers,
I am getting the below error when i post following error.
Cr Vendor
DR AP Upload A/C
Balancing field "Segment" in line item 001 not filled
Message no. GLT2201
Diagnosis
The field Segment marked as balancing is not filled with any value in line item 001, even after document splitting.
System Response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this business purpose.
Procedure for System Administration
Customizing
I have given the profit center in the AP Upolad GL account. Where as if i am not giving the any profit center it posting the document, system is taking the defult profit center and segment from the Edit Constants for Nonassigned Processes.
Please help me to overcome this issue since it is affecting my UAT and Integeration testing
if i am getting any answers it would be highly appreciated
Thanks
Aswin

Hi, Check this note may help you
Note 1026966 - Document splitting: No segment derived
Summary
Symptom
You implement the central document splitting for segment in an ERP system. The segment is not derived from the profit center while you postprocess the document splitting. The error message GLT2 201: "Balancing field "Segment" in line item nn not filled" may be displayed.
FORM COMPLETE_ASSIGNMENT
Delta001Context Block
ls_key-splitmethd = id_method.
get linetypes that will be splitted
IF ls_key <> ss_key.
    ss_key = ls_key.
Delete Block
    LOOP AT it_control_split_tab ASSIGNING <lf_control>.
Insert Block
    REFRESH st_linetype.
    LOOP AT it_control_split_tab ASSIGNING <lf_control>.

Balancing field "Segment" in line item 001 not filled- J1IEX

Dear Friends,
We are getting below error message while posting Excise invoice in J1IEX.
Balancing field "Segment" in line item 001 not filled
Message no. GLT2201
Diagnosis
The field Segment marked as balancing is not filled with any value in line item 001, even after document splitting.
System response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
u2022 No value can be derived for this field from the current document data.
u2022 You have entered a document type that is not designed for this business purpose.
We have checked P.O asset, Internal order etc it seems there no problem with any of these and in profit center master segment field is maintained.
Please suggest what would be the reason for this.
Thanks,
Dhanu

Any reply to this.

Balancing field profit centre line item 001 not filled

Hi Guru's,
am facing payroll posting problem system throwing error as Balancing field in profit centre line item 001 not filled i have checked every thing is correctly maintained and please guide me where i have gone wrong and where exactly i get this line item to check please help me in solving my problem, as it is urgently required
thanks in advance
chaitra

Balancing field "Profit Center" in line item 001 not filled
Above error is coming due to splitting .Try to do the following process
First check the line item 001 and get the GL no for which GL you are getting the error.
Ask your FI persons, what is the default Profit Center for that company code.
Goto Tcode FAGL3KEH and enter the company code......enter GL code and Default profit center in the last column.
Before doing this check the Business Area in IT 0027 and IT0001.Make sure that same Business Area in these ITs.
Mohan

GLT2 201 Balancing field Segment in line item 001 not filled - BAI2

Hi
I am using BAI2 Lockbox format. I am on Enhancement pack 4 in ECC 6.0. I have reviewed all the threads which are based on this issue in the past. As I am already on EP 4 all those notes won't be applicable to me. I am also facing the same issue. As per process lockbox is a 2 step posting:
I am getting the GLT2 201 issue in this area only
Area 1
Dr. Bank Clg A/c
Cr. Lockbox Incoming A/c
I am able to clear my customer when I import the lockbox file
Area 2:
Dr. Lockbox Incoming A/c
Cr. Customer A/c
I was of the perception that system should post the Area 1 entry first then the Area 2 entry but if system does like this then how the segment will come in the first entry as both line items are B/S related.
As per system behaviour it is clearing the Area 2 entry first. This means that 'Lockbox incoming account' should derive the segment/profit center from the customer line. Area 1 posting should take the segment/profit center from the Area 2 entry. I am sure that lots of people have got this issue but none of them have given the clear explanation of how to crack this issue. Your sincere response is hightly appreciated. I have seen one of the thread where 'AMS' has posted that the issue has been resolved using sub rule but it is not mentioned how to do it.

Here is SAP's response on this. The only option is to default the profit cneter or Segment or the split object you use.
Thanks
Anup
02/05/2010 - 03:37:56 CST - Reply by SAP
Dear Anup,
In general the bank postings like payment on account or bank tranfers
are handeled as unassigned processes since these do not contain a link
to the causing invoices. Therefore in such scenarios we normally expect
a default cash account assignment to be set.
But this not leading to the not balancing balance sheet on the segment
level. as you have mentioned in your previous reply lock box business
process works as follows.
Two documents are posted via the lock box functionality:
- customer payment via check and
- bank transfer when the check is used.
During the first posting a customer payment with clearing is posted.
Unapplied Cash A/C 50 <- orginal segment taken over from customer line
Customer -50 <- orginal segment derived from the cleared item
The payment is linked to the causing invoice via the clearing process
therefore the original segment can be derived.
During the second posting a bank transfer is taken place. Since there
is not link to the causing invoice the bank posting is posted to a
default segment.
Main Bank A/C 50 <- default segment
Unapplied Cash A/C -50 <- default segment
Since the unapplied cash account is open item managed the clearing on
this account will have to take place between the customer payment and
the bank transfer. This will create the missing link between the paymentand the bank transfer.
Unapplied Cash 50 default segment derived from cleared item (doc.2)
Unapplied Cash -50 original segment derived from cleared item (doc.1)
Zero Balance A/C -50 default segment
Zero Balance A/C 50 original segment
Via the automatically created zero balancing lines in the clearing
document on the unappied cash account the financial statement on the
segment level is balanced.
In case of the electronical bank statement the situation is indeed
similar. The only difference would be that the process starts with the
incomming payment on the bank account, which is then transfered to the
unapplied bank clearing account and only after that customer payment
is posted. Therefore the clearing of the unapplied cash account as
well as the zero balance are posted during the customer payment on the
customer reconciliation account.
The functionality of document splitting enables the setting of the
source related account assigments on the follow-up documents, only in
such cases where the causing relationship can be derived from the
business process at the point of the posting. There are still sceanrios
where the required connection is not available at the time of posting.
Therefore in such processes the assginment of defaults is required.
I hope I could clarify the logic of the process from the point of view
of the SAP standard process. If you still have doubt or questions pleasespecify those in detail and with concrete examples.
Thank you.

Balancing field "profit center" line item 001 not filled

Dear Gurus,
I am trying to post an vendor invoice in fb60 , but i am getting the above error message.
The g/l account involved in the transaction is related to purchase price variance.
Can somebody help me what could be the problem.
Cheers
Balaji

The same issuse what i have faced at the time of document spliting n case of miro with debit note
pls go through the following examples waht i have implemented
SOLUTION:BY MAINTAIN SPLIT RULE THIS IS SOLVED AS FOOLOWS
PATH:SPROSPA REF IMGFAGLBUSINEE TRANSACTION--DOCUMENT SPLITINGEXTENDED DOCUMENT SPLITING-
DEFINE SPLITING RULE
METHOD : SPLITING METHOD: TRANSACTION :BUSINESS TRANSACTION: VARIANT : VARIANT
Z000000012 PRIL SPLIT 0000 UNSPECIFIED PosTING Z002 Vendor Invoice/Document/Credit Memo
BY SELECTING THE ABOVE1 AND DOUBLE CLICK ON ITEM CATEGORYS TO BE EDITED.THERE ACTUALLY CATEGORY MAINTAIEND FOR
TDS VENODR LIKE THAT BUT WE FACED THE PROBLE WITH ARTICLE AND PROFIT CENETRE.THERE WE HAVE MAINTAINED CATEGORY
FOR ARTICLE LIKE

Error : Balancing Field " Profit Center" in line item not filled

Dear Friends,
I have a specific issue, as my client while posting inventory differences in [MI07] an error is populating as Balancing Field "Profit Center" in line item not filled.
Please help me in solving the issue where we can assign the profit center other than in materal master as they donot maintained any profit center in material master for all materials
Thanks inadvance
Sri

Hi BK , thanks for your answer
in kch3 there are several profit center groups and how can we identify whcih profit center is assigned to whcih profit center group
regards
sri

Update Profit Center Field in CO Line item tables

Hi,
We are working on ECC6.0 NewGL with Real-time CO-FI integration for Cross Company Code and Cross Pofit Center.
For those CO internal documents (like activity confirmation at production order) where there is no cross company code or cross profit center postings, no FI document is generated and hence table FAGLFLEXA is not updated. So, we wanted to take data from CO table COEP / COVP for these internal CO documents. However, there is no Profit Center field in CO line item tables COEP / COVP. We don't want to refer to Object Number (OBJNR) of COEP / COVP tables and take profit center from master table of cost centers, IOs etc..,as Profit center in the cost center, IO masters may get changed latter.
I tried to generate a new report through report painter from structure CCSS, but Profit center is not defined as Charactericts there. Hence of no use.
Can we append Profit Center field in CO line item tables COEP / COVP and update tatabase at the time of posting? Is there any risk?
Please suggest any other alternative...
Thanks,
Bijay

Hi,
As per the standard process we can't derive PC from CO-internal Object...as per my knowledge.
Better you can derive from IO-CC master PC ....if your question that it will change frequently then -no control can make.
Regd,
Kha

How to find out Last Changed Fields for a line item of a PO

Dear All,
Pls let me know is there any FM or procedure to find the last changed fields for each line item of a PO. I should be able to get the details on the basis of Last changed Date. Can u pls guide me in this?

Hello,
Check the table CDHDR,CDPOS for PO items,
Check this code:
REPORT ZV_GET_LATEST_SO .
DATA: BEGIN OF ITAB OCCURS 0,
        OBJECTCLAS TYPE CDHDR-OBJECTCLAS,
        OBJECTID TYPE CDHDR-OBJECTID,
        CHANGENR TYPE CDHDR-CHANGENR,
        USERNAME TYPE CDHDR-USERNAME,
        UDATE TYPE CDHDR-UDATE,
        UTIME TYPE CDHDR-UTIME,
        TCODE TYPE CDHDR-TCODE,
        TABNAME TYPE CDPOS-TABNAME,
        TABKEY TYPE CDPOS-TABKEY,
        FNAME TYPE CDPOS-FNAME,
        CHNGIND TYPE CDPOS-CHNGIND,
      END OF ITAB.
TABLES: CDHDR,CDPOS.
DATA: LT_CDHDR LIKE CDHDR OCCURS 0 WITH HEADER LINE,
LT_CDPOS LIKE CDPOS OCCURS 0 WITH HEADER LINE.
*REFRESH AUSG.
CLEAR CDHDR.
CLEAR CDPOS.
CDHDR-OBJECTCLAS = 'EINKBELEG'.
CDHDR-OBJECTID   = '0000001784'. " Purchase order number
**SELECT A~OBJECTCLASS A~OBJECTID A~CHANGENR A~USERNAME A~UDATE A~UNAME
**B~TCODE
**B~TABNAME B~TABKEY B~FNAME B~CHNGIND INTO TABLE ITAB FROM CDHDR AS A
**INNER JOIN CDPOS AS B ON A~OBJECTCLASS = B~OBJECTCLASS
**                         A~OBJECTID    = B~OBJECTID
**                         A~CHANGENR    = B~CHANGENR
**                    WHERE OBJECTCLAS = 'VERKBELEG'
**                      AND OBJECTID = '0000001784'.
*SELECT * FROM CDPOS INTO TABLE LT_CDPOS WHERE OBJECTCLAS = 'VERKBELEG'
*                                    AND OBJECTID = '0000001784'.
*IF NOT LT_CDPOS[] IS INITIAL.
* SELECT *
* INTO   TABLE LT_CDHDR
* FROM   CDHDR
* FOR    ALL ENTRIES IN LT_CDPOS
* WHERE OBJECTCLAS = LT_CDPOS-OBJECTCLAS
* AND    OBJECTID = LT_CDPOS-OBJECTID
* AND    CHANGENR = LT_CDPOS-CHANGENR.
*ENDIF.
** SORT ITAB BY OBJECTCLAS ODJECTID DESCENDING.
*LOOP AT ITAB.
* WRITE: ITAB-UDATE."ITAB-UNAME.
*ENDLOOP.
*--- Interne Tabellen -------------------------------------------------
DATA: BEGIN OF ICDSHW OCCURS 50.       "Ausgabeaufbereitung
        INCLUDE STRUCTURE CDSHW.       "Zwischendatei
DATA: END OF ICDSHW.
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
     EXPORTING
          DATE_OF_CHANGE    = CDHDR-UDATE
          OBJECTCLASS       = CDHDR-OBJECTCLAS
          OBJECTID          = CDHDR-OBJECTID
          TIME_OF_CHANGE    = CDHDR-UTIME
          USERNAME          = CDHDR-USERNAME
     TABLES
          I_CDHDR           = LT_CDHDR
     EXCEPTIONS
          NO_POSITION_FOUND = 1
          OTHERS            = 2.
LOOP AT LT_CDHDR.
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
    EXPORTING
*   ARCHIVE_HANDLE                = 0
      CHANGENUMBER                  = LT_CDHDR-CHANGENR
*   TABLEKEY                      = '00000000 '
*   TABLENAME                     = ' '
* IMPORTING
*   HEADER                        =
   TABLES
     EDITPOS                       = ICDSHW
*   EDITPOS_WITH_HEADER           =
* EXCEPTIONS
*   NO_POSITION_FOUND             = 1
*   WRONG_ACCESS_TO_ARCHIVE       = 2
*   OTHERS                        = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT ICDSHW.
    IF ICDSHW-TABKEY+3(10) = '0000001784'
       AND ICDSHW-TABKEY+13(6) = '000001'.
    ENDIF.
ENDLOOP.
ENDLOOP.
Vasanth

Reference document number field on Invoice line item

Can anyone please tell me , where in customization , do i define what should get copied in the reference document number field on the line item of an invoice.
Currently in our system, credit memo request number is getting populated for a credit memo.
Thank you for your help in advance.

Hi,
If you are talking about line item level, then it is called Allocation Number. At the header level, it is called Reference number.
This is controlled using the copy control for billing - at the header level control.
The reference number & allocation number once maintained in the configuration, will show up in the Accounting doc - header level & item level, respectively.
For example - if the customer payment always refers to his PO number, then it really helps to use the allocation number for the accounting doc line items - which helps in clearing incoming payment faster. In this case, the reference number could be our delivery number. This is one of the examples for using both Ref & allocation #'s.
Hope, this helps!
S. Siva

The report in FI which contains Quantity field with every line item

Hi Gurus,
What are the reports in Finance which contains Qty field with every Line Item reports & reports that contains user name & System Id in it along with other informations e.g. G/L, Ar, AP
Thanks & Regds,
Santosh Rothe

Hi
Using the line item display report you can get the required details by changing layout in the output:
FBL1N: Vendor line item
FBL3N: G/L line item
FBL5N: Customer line item
VVR

Add New Screen Fields in Delievery Line Item

Hello All,
We have a requiremnet where we should add 3 custom fields to delivery line item tabs,
please let me know how I can add a new tab for delievry line item tabs and how to add new custom screen fields in that tab,.
Thanks
Add New Screen Fields in Delievery Line Item
Edited by: kishore_99 on Dec 8, 2009 5:31 PM

No, I won't explain it in detail - you need to read the documentation and at least make an attempt at the process on your own first. The documentation is right there in the IMG where I said it was but here's the path since you can't find it:
Logistics Execution -> Shipping -> System Modifications -> Business Add-Ins in Shipping -> BADI for Additional Item Detail Screen...

Open field for customer line item

Hi Guru
I have some problem about open field for customer line item post with posting key 09 and special GL , I open field at posting key 09 but the field still hidden . How I can open field for used . Thank you

Dear,
Use transaction FBL5N and select Special G/L Transactions only and execute.....here bring posting key and filter the posting with 09.
REgards,
Chintan Joshi

Balancing Field BA in line item no Filled

Similar Messages

Maybe you are looking for