Balancing Field "Business Area" in line item 001 not filled.

Dear Guru,
I am facing this problem while doing MIGO.
Kindly suggest.
Thanks is advance..
Raj

There could be multiple reasons for this. Pls check on:
1. For the Expense Account assigned in DIF, have u made the assignment for deriving Profit Center & Business Area in T Code OKB9
2. Ask your FI Consultant to check the Splitting Characteristics for the MIGO. Check the Splitting Characteristics assigned to the Accounting Document Type assigned to T Code MIGO. Also check if all the GL Accounts have been assigned a splitting characteritics. The path is:
IMG> Financial Accounting(New)>General Ledger Accounting (New)>Business Transactions>Document Splitting
3. Do you maintain profit center as a default in material Master? If yes, check if the same has been assigned in the view extended for the plant concerned?
4. Last but not the least check Input Business Area field in the Line Item
Edited by: m_n_novice on Aug 31, 2009 4:47 PM

Similar Messages

Issue : Balancing field "Business area" in line item 001 not filled

Hi Gurus...
I have facing an issue : Balancing field "Business area" in line item 001 not filled
I have maintained material management small difference account (DIF), to post the small differences... between PO value and (vendor) Invoice Value....
At the time of posting invoice system giving this error... even after maintaining the business area and profit center in MIRO transaction...
Here we have activated Document splitting in FI, also Business Area & Profit Center are mandatory fields..
Pls give some inputs in fixing this issue..
Thanks in advance....
Regards
Shashidhar..

Hi
There could be multiple reasons for this. Pls check on:
1. For the Expense Account assigned in DIF, have u made the assignment for deriving Profit Center & Business Area in T Code OKB9
2. Ask your FI Consultant to check the Splitting Characteristics for the MIGO. Check the Splitting Characteristics assigned to the Accounting Document Type assigned to T Code MIGO. Also check if all the GL Accounts have been assigned a splitting characteritics. The path is:
IMG> Financial Accounting(New)>General Ledger Accounting (New)>Business Transactions>Document Splitting
3. Do you maintain profit center as a default in material Master? If yes, check if the same has been assigned in the view extended for the plant concerned?
Pls check the settings. If any doubt, revert back.
Thanks & Best Regards
Sanil K Bhandari

VF02, Balancing field "Business Area" in line item 001 not filled

Hi, SD Expert.
When I released the billing document to accounting, used VF02, the system displayed a message 'Balancing field "Business Area" in line item 001 not filled', and I found the field of business area was blank, but I already assign the business area to plant and division and post the data comparision.
Edited by: lin huanxin on Jan 20, 2011 9:40 AM

Also please note If you define document splitting criteria based on Profit Center and if your billing document contains multiple line items with different profit center, this type of error will come.
To check this, Go to IMG Path -- Financial Accounting (New) --> General Ledger Accounting (New) --> Document Splitting --> Define Document Splitting Characteristics for General Ledger
There check whether the mandatory check box is selected for profit Center. So check in your billing document, whether any line item does not have profit center.
thanks
G. Lakshmipathi

Balancing field "Business Area" in line item 004 not filled (GLT2201)

Hi Friends,
While MIRO transaction I am getting following error message -
Balancing field "Business Area" in line item 004 not filled
Message no. GLT2201
I checked document splitting configuration is as follows -
Related GL is added for document splitting, Configuration at document type level RE>0300>001
Business area - mandatory field.
This GL is CENVAT GL account. And while doing MIRO, business area field is blank for this GL
Could anyone help me out?
Thanks
Nilesh Joshi

Very Good morning.. Barbara,
I have configured document splitting as follows -
1) Classify Document Types for document splitting-
Document type-RE
Business Transaction-0300 (Vendor invoice)
Variant-001 (Standard)
2) document splitting rule -
Method-0000000012
Business Transaction-0300
Variant-0001
Item Category-03000 ((Vendor)
3) Define Business Transaction Variants -
Business Transaction-->0300
               Accounting Transaction Variant-0001
                                Item category assigned-01000
                               01000 Balance Sheet Account
                               01100 Company Code Clearing
                               01300 Cash Discount Clearing
                               03000 Vendor
                               05100 Taxes on Sales/Purchases
                               05200 Withholding Tax
                               06000 Material
                               07000 Asset
                               20000 Expense
                               30000 Revenue
                               40200 Exchange Rate Difference
                               80000 Budget
Please let me know if i have missed any configuration part or something. I have stuck due to this problem .
Any help would be highly appreciable.
Thanks in advance ..Barbara.
Regards,
Nilesh

Balance field business area in line item 0001 not filled message GLT2201

When posting document through VF02, Iam getting bellow error message.
balance field business area in line item 0001 not filled message GLT2201
Message no. GLT2201
We have maintained all the configurtations as per the previous posts related to the same error message.
we are in very crucial stage to provide this solution.
Please do the needfull
Message Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 001, even after document splitting.
System Response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this
Please provide me your valuable suggestions.
Thanks for your cooperation
Ravikumar Billa
Edited by: Ravi Kumar B on Nov 12, 2010 6:06 AM

hi ravi,
kindly check your config of document splitting and also check the document type defined in document splitting....
check the field status of the document type.
also check whether there are any validations as such for business area
finally check your OKB9 settings whether bus. area and profit centre has been defined for that particualr cost element.
regards,
susheel

F110 -Balancing field "Business Area" in line item 002 not filled

Hi Experts,
We are running automatic payment program (F110) for invoices and getting below error in the proposal log.
Balancing field "Business Area" in line item 002 not filled GLT2 201 E
This error is coming for few invoices not for all, please provide your inputs.
Thanks,
Ratnam

Hi
Pls refer below notes for solution
Note 1039189 - Real-time integration: Error message GLT2 201
Note 1005749 - NewGL: Error GLT2 002 for invoice references
Note 1085921 - Document split
Reg
Vishnu

Balancing field "Business Area" in line item 002 not filled

Dear Sapgurus,
while i posting in migo i am facing this problem, please guide me immediately
Balancing field "Business Area" in line item 002 not filled
Message no. GLT2201
Diagnosis
The field Business Area marked as balancing is not filled with any value in line item 002, even after document splitting.
System Response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this business purpose.
Procedure for System Administration
Customizing

At the bottom of your error message details is the word "Customizing". You should be able to click on that and it should take you to the general location in SPRO of what needs to be fixed. From reading the message, my guess is that it will take you to the Document Splitting config. (Financial Accounting Global Settings/General Ledger Accounting (New)/Business Transactions/Document Splitting) 1. Check to see if you have Business Area under your config: Define Document Splitting Characteristics for General Ledger Accounting (for our company we have: GSBER Business Area field, zero balance checked, and PARGB in the Partner field and Mandatory Field checked.) My "guess" is that you've configured your Business Area to be a mandatory field. 2. Make sure under the config "Classify Document Types for Document Splitting" that your WE is set up correctly. For our company, we use Transaction 0600 and variant 0001 for WE.
We recently encountered that same error when we turned on a function in Enhancement Pack 4. For doc type "WE", we had transaction 0000 and once we changed it to 0600 for us in that doc splitter config, the MIGO would post.
Hope that helps,
Cindy

Balancing field "Business Area" in line item 004 not filled

Hi people,
We are trying to execute the transaction "MBST" (cancel material document) and the system is showing:
"Balancing field "Business Area" in line item 004 not filled"
"The field Business Area marked as balancing is not filled with any value in line item 004, even after document splitting."
We have the transaction OKB9 ok. All the acconts are with the configuration ok with the respective profit center.
All the configuration in the "Document Splitting" are ok to.
Could you help me please?
Thanks,
Rosana.

Hi Rosana
It looks strange.. When the original document got posted, why does the reversal poses a problem
I can think of only one reason...
Check what document type is used for reversal.. Is it the same as original document? If it is different, check what Business transaction type is assigned against the 2 doc types.... (IMG Step Classify document types for document splitting)
Another possiblity could be that the posting key used during reversal has BUSINESS AREA suppressed...You can check what posting key is used in reversal using one of the earlier reversal docs
Regards
Ajay M

Balancing field "Business Area" in line item 002 not filled- GLT2201

Hello Guys,
Balancing field "Business Area" in line item 002 not filled
Message no. GLT2201
We have defaulted profit center and Business area to WBS element. Document splitting is active. We have done PR, PO. Here WBS,Profit center, Business area is populated. And when we are doing MIGO we are getting error as "Balancing field "Business Area" in line item 002 not filled
Message no. GLT2201"
Earlier only profit center is defaulted to WBS element, there was no error.
Can anybody throw some light on this.
Regards,
SK

Hi
The error could be because of the following reasons:
1. The Business Area field is supressed
2. The assignment for Plant to Business area is different from the Business Area mentioned in the WBS Element.
3. You need to check the Splitting Characteristics and the Item Categories assigned for Material Document. The path for the same is :
IMG>Financial Accounting>General Ledger accounting (New)>Business Transactions>Document Splitting>Extended Document Splitting
Thanks & Regards
Sanil Bhandari

Re: balance field business area in line item 0003 not filled message GLT22

Hi
I am getting the afroesaid error while releasing the document to account after invoicing.
Message No : GLT2201
Diagnosis: The field Business Area marked as balancing is not filled with any value in Line Item 003, even after document splitting.
System Response: The document cannot be posted
Procedure:First Check your entries
Additional causes could be :
-No value can be drived for this field from the current document data
- You have entered a document type that is not designed for this business purpose
I have checked all the Field status variants for GLs and the filed status for posting keys. Everywhere the Business Area is marked as compulsory. In the document the business area has been entered. In splitting the document types have been assigned to the correct transaction and variant.
The error happens when i am releasing a customer invoive for billing. In case I release one sale order in invoicing this error does not happen. But when I combine more then one sales order or service order the error happens.
Pls suggest what could be the error
Regards
Sanil Bhandari

Hi,
Please check whether u have maintained the Document splitting characteristics for General ledger Accounting in that u need to check whether your Business area is defined and Zero balance and Partner field of mandatory field are checked.
Check while posting any of the line item should be filled with Business area.
Regards
Balaji

Balancing field "Business Area" in line item 003 not filled

Dear Experts,
Ii am getting this error while doing invoicing for sale of material for one sale organisation while i don't get the error for the other sales organisation , i have checked all the assignments such as plant to business area,division to business area and others but still i am not getting where i have done mistake and the line item 003 is the GL of CST which is common for all business areas.
hoping for a positive response as soon as possible as this has halted our production and sales cycle.
thanks,
Rahul Vaid

If you define document splitting criteria based on Profit Center and if your billing document contains multiple line items with different profit center, this type of error will come.
To check this, Go to IMG Path -- Financial Accounting (New) --> General Ledger Accounting (New) --> Document Splitting --> Define Document Splitting Characteristics for General Ledger
There check whether the mandatory check box is selected for profit Center. So check in your billing document, whether any line item does not have profit center.
thanks
G. Lakshmipathi

T-code: F-02 (Balancing field "Profit Center" in line item 001 not filled)

Dear Experts,
I am getting following error while i am doing transfer by using t-code F-02.
"Quote
Balancing field "Profit Center" in line item 001 not filled
Message no. GLT2201
Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 001, even after document splitting.
System Response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
u2022 No value can be derived for this field from the current document data.
u2022 You have entered a document type that is not designed for this business purpose.
Procedure for System Administration
Customizing
Unquote"
Where do you thing the mistake is and what i have to do? Please resolve my problem.
Thanks advance,
Best Regards.
Ripon Kumar Paul

Hi
Balance Sheet Accounts are required to be split in case you have document splitting activated u2026.. and in your case the profit center is made mandatory for the documents to get splitted u2026.. and the profit center would be derived from cost centeru2026u2026u2026. therefore to split the document by using document type u2013 SA through F-02 we need to do further settings, i.e., you need to configure u201CExtended Document Splitting Configurationu201D
For example: Rent expenditure is been posted which is having more than 2 Debits and consisting of different Cost Centers and posting to Rent Payable A/c which is a Balance sheet A/cu2026u2026.
Path: Financial Accounting (New) - - General Ledger Accounting (New) - - Business Transactions - - Document Splitting - - Extended Document Splitting -- Define Document Splitting Rule
Define your Business Transaction variant and for that variant define document splitting rule u2026u2026u2026.. where in you need to activate Automatically split check box for the desired categories.
Regards,
Sathish

MIRO Error - Balancing field "Profit Center" in line item 001 not filled

Dear Experts,
Recently we upgraded to ECC 6.0 from 4.6C. We implemented new GL functionality.
We have also introduced new Profit Centers and have updated the same in Material Master.
Now, the new Profit Centers are valid from 01.04.2009 till 31.12.9999.
Now my problem is while doing MIRO after 31.03.2009 for old PO's i.e. the PO's which were created before 01.04.2009 the system gives me error "Balancing field "Profit Center" in line item 001 not filled".
This is because for the particular line item it picks the profit center from material master, but the validity of that (NEW) profit center is from 01.04.2009 whereas I want to do the posting in back date i.e. for eg. 28.03.2009. Due to which it does not get any profit center.
How do I resolve this problem. Is there any exit or BADI to do the same.
Regards...

Hi
There could be multiple reasons for this. Pls check on:
1. For the Expense Account assigned in DIF, have u made the assignment for deriving Profit Center & Business Area in T Code OKB9
2. Ask your FI Consultant to check the Splitting Characteristics for the MIGO. Check the Splitting Characteristics assigned to the Accounting Document Type assigned to T Code MIGO. Also check if all the GL Accounts have been assigned a splitting characteritics. The path is:
IMG> Financial Accounting(New)>General Ledger Accounting (New)>Business Transactions>Document Splitting
3. Do you maintain profit center as a default in material Master? If yes, check if the same has been assigned in the view extended for the plant concerned?
Pls check the settings. If any doubt, revert back.
Thanks & Best Regards,
rahul.

Balancing field "Profit Center" in line item 001 not filled in f-90

Dear Experts
the below error is comming at the time of procuring the assets with vendor in t code f-90
Balancing field "Profit Center" in line item 001 not filled
Message no. GLT2201
Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 001, even after document splitting.
System Response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this business purpose.
Procedure for System Administration
Customizing
Kndly help me on this
regards
venkataswamy

Hi,
1. Check the asset Master whether Cost center is assigned to asset.
2. In Cost center profit center should be assigned.
3. Specify Account Assignment Types for Account Assignment Object (ACSET)
SPRO → financial accounting → asset accounting → integration with the general ledger accounts →
Additional Account assignment Objects → Specify Account Assignment Types for Account Assignment Object.
You can make a generic entry, using an asterisk (*), for the transaction type. The system then uses the
account assignment type you entered for all transaction types for that account assignment object.
Do the same for all depreciation area then from asset master cost center will flow to accounting document
and form cost center profit center will get derived.
Regards,
Rohidas Shinde

Balancing field "Profit Center" in line item 001 not filled in vendor post

Dear Experts,
Document Spitting is activated in our system. Now in Vendor posting we are getting the error " Balancing field "Profit Center" in line item 001 not filled ". Please provide your suggestions on this.

Balancing field "Profit Center" in line item 001 not filled error is coming due to splitting .Try to do the following and check ...
First check the line item 001 and get the GL no for which GL you are getting the error.
Goto PCP0 and double click on Document then goto Settings -> Layout -> Change here select Document Line Number ......check the line item 001
Ask your FI persons and get the required profit center or default Profit Center for that company code.
Goto Tcode FAGL3KEH and enter the company code......enter GL code and Default profit center in the last column.
Before doing this check the Business Area in IT 0027 and IT0001.Make sure that same Business Area is there in both the ITs.
Mohan

Balancing Field "Business Area" in line item 001 not filled.

Similar Messages

Maybe you are looking for