Balancing field "Business Area" in line item 002 not filled- GLT2201
Hello Guys,
Balancing field "Business Area" in line item 002 not filled
Message no. GLT2201
We have defaulted profit center and Business area to WBS element. Document splitting is active. We have done PR, PO. Here WBS,Profit center, Business area is populated. And when we are doing MIGO we are getting error as "Balancing field "Business Area" in line item 002 not filled
Message no. GLT2201"
Earlier only profit center is defaulted to WBS element, there was no error.
Can anybody throw some light on this.
Regards,
SK
Hi
The error could be because of the following reasons:
1. The Business Area field is supressed
2. The assignment for Plant to Business area is different from the Business Area mentioned in the WBS Element.
3. You need to check the Splitting Characteristics and the Item Categories assigned for Material Document. The path for the same is :
IMG>Financial Accounting>General Ledger accounting (New)>Business Transactions>Document Splitting>Extended Document Splitting
Thanks & Regards
Sanil Bhandari
Similar Messages
-
F110 -Balancing field "Business Area" in line item 002 not filled
Hi Experts,
We are running automatic payment program (F110) for invoices and getting below error in the proposal log.
Balancing field "Business Area" in line item 002 not filled GLT2 201 E
This error is coming for few invoices not for all, please provide your inputs.
Thanks,
RatnamHi
Pls refer below notes for solution
Note 1039189 - Real-time integration: Error message GLT2 201
Note 1005749 - NewGL: Error GLT2 002 for invoice references
Note 1085921 - Document split
Reg
Vishnu -
Balancing field "Business Area" in line item 002 not filled
Dear Sapgurus,
while i posting in migo i am facing this problem, please guide me immediately
Balancing field "Business Area" in line item 002 not filled
Message no. GLT2201
Diagnosis
The field Business Area marked as balancing is not filled with any value in line item 002, even after document splitting.
System Response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this business purpose.
Procedure for System Administration
CustomizingAt the bottom of your error message details is the word "Customizing". You should be able to click on that and it should take you to the general location in SPRO of what needs to be fixed. From reading the message, my guess is that it will take you to the Document Splitting config. (Financial Accounting Global Settings/General Ledger Accounting (New)/Business Transactions/Document Splitting) 1. Check to see if you have Business Area under your config: Define Document Splitting Characteristics for General Ledger Accounting (for our company we have: GSBER Business Area field, zero balance checked, and PARGB in the Partner field and Mandatory Field checked.) My "guess" is that you've configured your Business Area to be a mandatory field. 2. Make sure under the config "Classify Document Types for Document Splitting" that your WE is set up correctly. For our company, we use Transaction 0600 and variant 0001 for WE.
We recently encountered that same error when we turned on a function in Enhancement Pack 4. For doc type "WE", we had transaction 0000 and once we changed it to 0600 for us in that doc splitter config, the MIGO would post.
Hope that helps,
Cindy -
Balancing field "Business Area" in line item 004 not filled (GLT2201)
Hi Friends,
While MIRO transaction I am getting following error message -
Balancing field "Business Area" in line item 004 not filled
Message no. GLT2201
I checked document splitting configuration is as follows -
Related GL is added for document splitting, Configuration at document type level RE>0300>001
Business area - mandatory field.
This GL is CENVAT GL account. And while doing MIRO, business area field is blank for this GL
Could anyone help me out?
Thanks
Nilesh JoshiVery Good morning.. Barbara,
I have configured document splitting as follows -
1) Classify Document Types for document splitting-
Document type-RE
Business Transaction-0300 (Vendor invoice)
Variant-001 (Standard)
2) document splitting rule -
Method-0000000012
Business Transaction-0300
Variant-0001
Item Category-03000 ((Vendor)
3) Define Business Transaction Variants -
Business Transaction-->0300
Accounting Transaction Variant-0001
Item category assigned-01000
01000 Balance Sheet Account
01100 Company Code Clearing
01300 Cash Discount Clearing
03000 Vendor
05100 Taxes on Sales/Purchases
05200 Withholding Tax
06000 Material
07000 Asset
20000 Expense
30000 Revenue
40200 Exchange Rate Difference
80000 Budget
Please let me know if i have missed any configuration part or something. I have stuck due to this problem .
Any help would be highly appreciable.
Thanks in advance ..Barbara.
Regards,
Nilesh -
Issue : Balancing field "Business area" in line item 001 not filled
Hi Gurus...
I have facing an issue : Balancing field "Business area" in line item 001 not filled
I have maintained material management small difference account (DIF), to post the small differences... between PO value and (vendor) Invoice Value....
At the time of posting invoice system giving this error... even after maintaining the business area and profit center in MIRO transaction...
Here we have activated Document splitting in FI, also Business Area & Profit Center are mandatory fields..
Pls give some inputs in fixing this issue..
Thanks in advance....
Regards
Shashidhar..Hi
There could be multiple reasons for this. Pls check on:
1. For the Expense Account assigned in DIF, have u made the assignment for deriving Profit Center & Business Area in T Code OKB9
2. Ask your FI Consultant to check the Splitting Characteristics for the MIGO. Check the Splitting Characteristics assigned to the Accounting Document Type assigned to T Code MIGO. Also check if all the GL Accounts have been assigned a splitting characteritics. The path is:
IMG> Financial Accounting(New)>General Ledger Accounting (New)>Business Transactions>Document Splitting
3. Do you maintain profit center as a default in material Master? If yes, check if the same has been assigned in the view extended for the plant concerned?
Pls check the settings. If any doubt, revert back.
Thanks & Best Regards
Sanil K Bhandari -
VF02, Balancing field "Business Area" in line item 001 not filled
Hi, SD Expert.
When I released the billing document to accounting, used VF02, the system displayed a message 'Balancing field "Business Area" in line item 001 not filled', and I found the field of business area was blank, but I already assign the business area to plant and division and post the data comparision.
Edited by: lin huanxin on Jan 20, 2011 9:40 AMAlso please note If you define document splitting criteria based on Profit Center and if your billing document contains multiple line items with different profit center, this type of error will come.
To check this, Go to IMG Path -- Financial Accounting (New) --> General Ledger Accounting (New) --> Document Splitting --> Define Document Splitting Characteristics for General Ledger
There check whether the mandatory check box is selected for profit Center. So check in your billing document, whether any line item does not have profit center.
thanks
G. Lakshmipathi -
Balancing field "Business Area" in line item 004 not filled
Hi people,
We are trying to execute the transaction "MBST" (cancel material document) and the system is showing:
"Balancing field "Business Area" in line item 004 not filled"
"The field Business Area marked as balancing is not filled with any value in line item 004, even after document splitting."
We have the transaction OKB9 ok. All the acconts are with the configuration ok with the respective profit center.
All the configuration in the "Document Splitting" are ok to.
Could you help me please?
Thanks,
Rosana.Hi Rosana
It looks strange.. When the original document got posted, why does the reversal poses a problem
I can think of only one reason...
Check what document type is used for reversal.. Is it the same as original document? If it is different, check what Business transaction type is assigned against the 2 doc types.... (IMG Step Classify document types for document splitting)
Another possiblity could be that the posting key used during reversal has BUSINESS AREA suppressed...You can check what posting key is used in reversal using one of the earlier reversal docs
Regards
Ajay M -
Balance field business area in line item 0001 not filled message GLT2201
When posting document through VF02, Iam getting bellow error message.
balance field business area in line item 0001 not filled message GLT2201
Message no. GLT2201
We have maintained all the configurtations as per the previous posts related to the same error message.
we are in very crucial stage to provide this solution.
Please do the needfull
Message Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 001, even after document splitting.
System Response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this
Please provide me your valuable suggestions.
Thanks for your cooperation
Ravikumar Billa
Edited by: Ravi Kumar B on Nov 12, 2010 6:06 AMhi ravi,
kindly check your config of document splitting and also check the document type defined in document splitting....
check the field status of the document type.
also check whether there are any validations as such for business area
finally check your OKB9 settings whether bus. area and profit centre has been defined for that particualr cost element.
regards,
susheel -
Re: balance field business area in line item 0003 not filled message GLT22
Hi
I am getting the afroesaid error while releasing the document to account after invoicing.
Message No : GLT2201
Diagnosis: The field Business Area marked as balancing is not filled with any value in Line Item 003, even after document splitting.
System Response: The document cannot be posted
Procedure:First Check your entries
Additional causes could be :
-No value can be drived for this field from the current document data
- You have entered a document type that is not designed for this business purpose
I have checked all the Field status variants for GLs and the filed status for posting keys. Everywhere the Business Area is marked as compulsory. In the document the business area has been entered. In splitting the document types have been assigned to the correct transaction and variant.
The error happens when i am releasing a customer invoive for billing. In case I release one sale order in invoicing this error does not happen. But when I combine more then one sales order or service order the error happens.
Pls suggest what could be the error
Regards
Sanil BhandariHi,
Please check whether u have maintained the Document splitting characteristics for General ledger Accounting in that u need to check whether your Business area is defined and Zero balance and Partner field of mandatory field are checked.
Check while posting any of the line item should be filled with Business area.
Regards
Balaji -
Balancing field "Business Area" in line item 003 not filled
Dear Experts,
Ii am getting this error while doing invoicing for sale of material for one sale organisation while i don't get the error for the other sales organisation , i have checked all the assignments such as plant to business area,division to business area and others but still i am not getting where i have done mistake and the line item 003 is the GL of CST which is common for all business areas.
hoping for a positive response as soon as possible as this has halted our production and sales cycle.
thanks,
Rahul VaidIf you define document splitting criteria based on Profit Center and if your billing document contains multiple line items with different profit center, this type of error will come.
To check this, Go to IMG Path -- Financial Accounting (New) --> General Ledger Accounting (New) --> Document Splitting --> Define Document Splitting Characteristics for General Ledger
There check whether the mandatory check box is selected for profit Center. So check in your billing document, whether any line item does not have profit center.
thanks
G. Lakshmipathi -
Balancing Field "Business Area" in line item 001 not filled.
Dear Guru,
I am facing this problem while doing MIGO.
Kindly suggest.
Thanks is advance..
RajThere could be multiple reasons for this. Pls check on:
1. For the Expense Account assigned in DIF, have u made the assignment for deriving Profit Center & Business Area in T Code OKB9
2. Ask your FI Consultant to check the Splitting Characteristics for the MIGO. Check the Splitting Characteristics assigned to the Accounting Document Type assigned to T Code MIGO. Also check if all the GL Accounts have been assigned a splitting characteritics. The path is:
IMG> Financial Accounting(New)>General Ledger Accounting (New)>Business Transactions>Document Splitting
3. Do you maintain profit center as a default in material Master? If yes, check if the same has been assigned in the view extended for the plant concerned?
4. Last but not the least check Input Business Area field in the Line Item
Edited by: m_n_novice on Aug 31, 2009 4:47 PM -
Balancing field "Profit Center" in line item 002 not filled and VF02
Dear All,
Below mentioned error we got in VF02 while releasing the billing to Accounting document.
In this case SO has created. Later with out delivery has been created Billing ( VF01) And Later Releasing through VF02 ( For only 1 specific Billing type )
But we have CRM Integration also from CRM 7.0 TO ECC 5.0 ( New GL Is there in ECC 5.0)
Here alternative solution is there i.e In OKKP T code if we deselect Profit center Button Issue will be resolved from SD side ( PC Issue )
Then problem will come to CRM with another message as ( Account-based PCA not active in year 2011 in controlling area 1001 (Notification I KM 029) Message no. CRM_ORDER_MISC 060)
Balancing field "Profit Center" in line item 002 not filled
Message no. GLT2201
Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 002, even after document splitting.
System response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this business purpose.
Please help on same.Hi
If i am selecting that indicator in 0KE5 Problem will be resolved in CRM.
But VF02 Is getting this Balancing field "Profit Center" in line item 002 not filled problem.
With out selecting that indicator please suggest. From Last 5 years we are using this Production System.
0KE5 indicator has not selected from 2005 to 2011 also.
CRM Is is process. we have selected in QA, But problm occurs to VF01 and CRM Process.
Simply if i select 0KE5 CRM problm will resolved.
Later SD Problem will come into the pictute.
Note: In PD1 System we hav not selected for 2011 also.
Pls put more inputs. -
F-54 Balancing field "Profit Center" in line item 002 not filled Message no. GLT2201
Hi,
During F-54 error "Balancing field "Profit Center" in line item 002 not filled" "Message no. GLT2201" showing.
I have gone through previous posts with message no. I got below solutions but those applicable belongs to EHP 600 but ours is EHP 605.
1. Note: 930365 not applicable for EHP 605
2. Note: 887794 correction process according to note applies max EHP 600.
3. http://wiki.scn.sap.com/wiki/display/ERPFI/Document+split+when+clearing+down+payment+with+taxes
My querrys are If i apply above 2 & 3 points solutions what will happen. However instead of creation of new "Document type" if i do configuration changes for existing document type "KA" what will the negative impact and risk.Dear Mr Rahul
Thanks for your suggestion
but there's something odd about this..
the other company code is working just fine for years..
and i've already maintain configuration both for doc splitting especially the splitting rule and GSP_KD1
yet the error still occur
is there any suggestion Mr Rahul?
or anyone?
Best Regards
Rumi -
Balancing field "Profit center" in line item 002 not filled
Dear All,
We are making incoming payment from customer in F-28
001 40 1031100881 TRA-IDBI-3384-IC 240060.00
002 19H 10000106 HYDERABADI BANGELS 240000.00-
003 15 10000106 HYDERABADI BANGELS 60.00-
19 means Special GL credit
H- Security deposit
003 15 10000106 HYDERABADI BANGELS 60.00- (Debit note document)
*While making incoming payment we are getting Error :Balancing field "Profit center" in line item 002 not filled for customer line item.
But there is no field to capture the profit center. Please provide me solution.
Thanks in advance..
Regards,
Saisri.Hi,
The error is due to document splitting being active, u wont give profit center directly, u need to give cost center. In cost center profit center will be updated.
So, assign cost center for line item 002 i.e in your case posting key 19H and then post.
Hope u understood.
regards
srikanth -
Balancing field "business area" in line item 003 is not filled
Hi
when i go to release invoice to accounting system is telling that - balancing field "business area" in line item 003 is not filled , even in item wise all business area were only one (1100) .and in header states system is showing that -error in accounting interface.
can anybody throw light on me on this issue
regards
bvdvhi,
i am following rule no 1 and the assignment is fine over there
it is working for all line items except one line item and giving message like above menctioned in subject line but if i check in line item 30 business area is exist like all line item i.e 1100
for any information revert it
regards
bvdv
Maybe you are looking for
-
Well, my friend and I just received this 1st generation iPod Touch from a man at our church. He said we could sell it. However, it has some problems. For example, when I leave it alone, it cuts off completely, Then, I have to hold the home and power
-
I cannot find it anywhere. I want to download Logic on multiple computers in my house by only buying it once on the app store. Is this possible?
-
CF7 on RH Linux 5 install error
I'm attempting to install Cold Fusion 7 on Red Hat Linux 5 (32-Bit!! OS) and receiving the following errors: awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory dirname: error while loading
-
Firewire 800 External Hard Drive recomendations for recording
Ok so I posted a week or so ago about a bad experience I had with a firewire 800 external drive. Anyway, Im sending it back and getting a refund but I wanted to confer with you guys about a good, but cheaper (under $100 please) firewire 800 drive tha
-
I need information on how to install and execute the export/import utility
Hi there, I am migrating an application from Weblogic 10 to Weblogic 10.3. I need to import a desktop from a .portal file in Weblogic 10.3. I know how to do the process of installing and executing this tool in WebLogic 10, but I don't know how to do