Balancing field "Profit Center" in line item not filled

while am doing the document entry for incoming payments from the customer am getting this error. and profit center field is not available in the document entry.
Please give me the solution Its very urgent.
Regards
Vijay

Hi Vijay,
I take it you are using the new GL and document splitting.
The system derives a PC when you clear it against an invoice, however if you enter your payments and dont clear at the same time a default PC is required.
this can be found in Program SAPLFAGL_CUST_T8A30
In SPRO
It is FA
Master Data
PC
Assign default values to PC
If you dont have document splitting, ignore the above and configure in 3KEH a default PC for you bank account.
Hope this helps
Award points if this is useful.

Similar Messages

Error : Balancing Field " Profit Center" in line item not filled

Dear Friends,
I have a specific issue, as my client while posting inventory differences in [MI07] an error is populating as Balancing Field "Profit Center" in line item not filled.
Please help me in solving the issue where we can assign the profit center other than in materal master as they donot maintained any profit center in material master for all materials
Thanks inadvance
Sri

Hi BK , thanks for your answer
in kch3 there are several profit center groups and how can we identify whcih profit center is assigned to whcih profit center group
regards
sri

Balancing field "Profit Center" in line item not filled - Error during GR

Hi
When we tried to do MIGO for a non stock material (Account assignment category K), we are getting an error message that "Balancing field "Profit Center" in line item 001 not filled". The interesting factor is that we did the GR for similar kind of PO a week before. This PO is exact replica of the old one but wondering why we are getting this error now.
Please help me in resolving this issue as well as please let me know why it did worked in the earlier time and not now.
Thanks
Venkat.

Hi
Pleaes note that it is not allowing me to enter the profit center, neither in PO nor in GR.
I created two different POs.
a. Both are for non stock material with account assignment category 'K'
b. Material group for both the POs are same.
c. GL Account i entered in both the POs are same.
d. CO area entered in both the POs are same.
e. Ogranizational details of both the POs are same.
f. Ofcourse 'Ordering Unit' is different in both the POs.
When i tried to make a GR for the first PO, it is automatically proposing the profit center and i can post the GR. But when i tried the second PO, it is nether defaulting the profit center nor asking for profit center. It is giving an error message "Balancing field Profit Center in the line item 001 not filled.
We have not changed the profit center or any configirutaions and when we tried to do the GR simultaniously for both the POs, one get posted correctly and the other one is giving this error message.
Can any one of you please let me know what should be the reason ?
Thanks
Venkat.

IDOC_INPUT_INVOIC_FI:Balancing field "Profit Center" in line 004 not filled

Hi All
We have set up dopcument splitting funtionality and it is working fine when document is posted through FB60.
When I am trying the same using Idocs, it is issuing error message "Balancing field "Profit Center" in line 004 not filled".
The processing routine for this idoc is IDOC_INPUT_INVOIC_FI and process code is INVF.
I tried to debug it and found that the profit center is not being popoulated for vendor line item which is cautomatically calculated from the GL line items which are there in the idoc. This is the reason the error is issued.
I want to know why profit center is not populated for vendor item. When I do it from FB60, it is populated.
Can anyone help me here ?
Is there any SAP note related to this?

Hi
Pleaes note that it is not allowing me to enter the profit center, neither in PO nor in GR.
I created two different POs.
a. Both are for non stock material with account assignment category 'K'
b. Material group for both the POs are same.
c. GL Account i entered in both the POs are same.
d. CO area entered in both the POs are same.
e. Ogranizational details of both the POs are same.
f. Ofcourse 'Ordering Unit' is different in both the POs.
When i tried to make a GR for the first PO, it is automatically proposing the profit center and i can post the GR. But when i tried the second PO, it is nether defaulting the profit center nor asking for profit center. It is giving an error message "Balancing field Profit Center in the line item 001 not filled.
We have not changed the profit center or any configirutaions and when we tried to do the GR simultaniously for both the POs, one get posted correctly and the other one is giving this error message.
Can any one of you please let me know what should be the reason ?
Thanks
Venkat.

F-32 error Balancing field "Profit Center" in line 001 not filled"

Hi expert,
my user is posting with transaction F-32 and has the following error:
Balancing field "Profit Center" in line 001 not filled"
i have the following situation after simulating:
001 04         0000010637 SCHOTT FORMA VITRUM             377.514,60
002 19A      0000010637 SCHOTT FORMA VITRUM            350.850,00-     26.664,60- A1
003 50         0002110100 T/VAT CH                                                   26.664,60-                A1
and if i make general ledger simulation i have this situation:
line     post key gneral led.account      amount                profit center
1     04     1010100     T/AR trade         377.514,60                 blank
2     19     2101100     T/Adv from cust 350.850,00-                 2002000
3     50     2110100     T/VAT CH          26.664,60-                 2009000
if i click on the first line i have as General Ledger Account 1010100 that has field status group with profit center optional and ther is no reference to CO object or material to find the profit center...but after my double click on the 001 line i don't find any field where insert the profit center.
On the seconed line i have sales order that gives the profit center, so that's ok.
I remind you that the document splitting is active on my sistem,.
How can i do? to avoid errors

Hi
Classify G/L Accounts for Document Splitting is :
1000000     1009999     04000     Cash Account
1010000     2999999     01000     Balance Sheet Account
3000000     3999999     06000     Material
4000000     4999999     20000     Expense
6000000     6999999     30000     Revenue
7000000     7999999     40200     Exchange Rate Difference
And in Classify Document Types for Document Splitting for doc AB i have the following :
AB     Accounting document     0000     0001     Unspecified posting     Standard
Splitting Method               0000000002 Splitting: Customer, Vendor, Tax, Money, Co.Code Clearing
Business Transaction           0000       Unspecified posting
Transaction Variant            0001       Standard
Item category                  01100      Company Code Clearing
Processing category            1         Splitting based on base item categories
Base items from:
u2022     Company code of the position to be processed
u2022     Blank   Partner company code of the position to be processed
u2022     Blank check tax code ( could this flag help me)?
u2022     Blank check if cash disc related
Base item categories:
01000     Balance Sheet Account
01300     Cash Discount Clearing
02000     Customer
03000     Vendor
04000     Cash Account
05100     Taxes on Sales/Purchases
05200     Withholding Tax
06000     Material
07000     Fixed Assets
20000     Expense
30000     Revenue
40100     Cash Discount (Expense/Revenue/Loss)
40200     Exchange Rate Difference
All blank
Thanks

While Doing F-28 error-Balancing field "Profit Center" in line 002 not fill

Hello Sir,
I am doing F-28 Customer Incoming Payment , i have clear three invoice against payment.
So when i post that entry system gives me error Balancing field "Profit Center" in line 002 not filled".
so that entry could not found profit center. (Document Splitting Activate)
So can i assign Customer reconciliation account in T code - FAGL3KEH and assign Common Profit Center there.
Plz guide me , if i will assign there recon account ?.
reply soon
Thanks
J

Hi James,
According to me, you have two options, either enter the PC at the time of document entry or Go to doc.splitting & uncheck the PC mandatory field under doc. splitting characteristics for GL accounting.
Your problem will get resolve by doing this.
Thanks & Regards
Anuj Agarwal

Balancing field "Profit Center" in line item 001 not filled

When i am doing Posting with clearing(FB05) i am getting the below error message "Balancing field "Profit Center" in line item 001 not filled"
Background: When we are doing the MIRO transaction we have used a diffrent profit center than it came from the Purchase Order where we have added extra cost and included the new line items under GL tab and posted the Invoice.
Now i want to tranfer that to a diffrent Vendor and clear it. So i used FB05 transsaction. When i tired to do the transfer posting with clearing i am getting the error message "Balancing field "Profit Center" in line item 001 not filled" As we have under the document split Zero balances check box checked along with the Profit center Mandatory for field Profit Center. The system could not determine which profit center it has to use.
Thanks in advance.

Hi Kiran,
Could you tell me how you are able to resolve this issue as we are having the same issue.
Did you use the substitution rule?
Please let us know.
Thanks,
Madu

T-code: F-02 (Balancing field "Profit Center" in line item 001 not filled)

Dear Experts,
I am getting following error while i am doing transfer by using t-code F-02.
"Quote
Balancing field "Profit Center" in line item 001 not filled
Message no. GLT2201
Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 001, even after document splitting.
System Response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
u2022 No value can be derived for this field from the current document data.
u2022 You have entered a document type that is not designed for this business purpose.
Procedure for System Administration
Customizing
Unquote"
Where do you thing the mistake is and what i have to do? Please resolve my problem.
Thanks advance,
Best Regards.
Ripon Kumar Paul

Hi
Balance Sheet Accounts are required to be split in case you have document splitting activated u2026.. and in your case the profit center is made mandatory for the documents to get splitted u2026.. and the profit center would be derived from cost centeru2026u2026u2026. therefore to split the document by using document type u2013 SA through F-02 we need to do further settings, i.e., you need to configure u201CExtended Document Splitting Configurationu201D
For example: Rent expenditure is been posted which is having more than 2 Debits and consisting of different Cost Centers and posting to Rent Payable A/c which is a Balance sheet A/cu2026u2026.
Path: Financial Accounting (New) - - General Ledger Accounting (New) - - Business Transactions - - Document Splitting - - Extended Document Splitting -- Define Document Splitting Rule
Define your Business Transaction variant and for that variant define document splitting rule u2026u2026u2026.. where in you need to activate Automatically split check box for the desired categories.
Regards,
Sathish

Balancing field "Profit Center" in line item 001 not filled in VF02

Hi,
While releasing a billing document to accounting, we are getting the following error.
Balancing field "Profit Center" in line item 001 not filled.
Let me give more details about this.
We are in a retail implementation. Transaction combining cash and credit are normal in retail scenario.
Normally SAP billing document type is RV which does not allow item category 04000 which is cash.
To counter the above, we have created a document type YV with unspecified posting and assigned to SD document type BV(which is cash memo).
The billing documents with 2 line items with different profit centres, with SD document type BV when released to accounting is giving this error.
Any suggestions.

Hi all,
This transaction Iam also trying to post in FI directly.
The entry I am posting is
Dr   Cash 1000
Cr   Sales 500       PC X
Cr Sales   500       PC Y
I want the cash account to be split with PC X 500 and PC Y 500. I am getting the same error.
Can some one please guide. I have assigned cash account with item category 04000.
Thanks
Aravind

Balancing field "Profit Center" in line item 002 not filled and VF02

Dear All,
Below mentioned error we got in VF02 while releasing the billing to Accounting document.
In this case SO has created. Later with out delivery has been created Billing ( VF01) And Later Releasing through VF02 ( For only 1 specific Billing type )
But we have CRM Integration also from CRM 7.0 TO ECC 5.0 ( New GL Is there in ECC 5.0)
Here alternative solution is there i.e In OKKP T code if we deselect Profit center Button Issue will be resolved from SD side ( PC Issue )
Then problem will come to CRM with another message as ( Account-based PCA not active in year 2011 in controlling area 1001 (Notification I KM 029) Message no. CRM_ORDER_MISC 060)
Balancing field "Profit Center" in line item 002 not filled
Message no. GLT2201
Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 002, even after document splitting.
System response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this business purpose.
Please help on same.

Hi
If i am selecting that indicator in 0KE5 Problem will be resolved in CRM.
But VF02 Is getting this Balancing field "Profit Center" in line item 002 not filled problem.
With out selecting that indicator please suggest. From Last 5 years we are using this Production System.
0KE5 indicator has not selected from 2005 to 2011 also.
CRM Is is process. we have selected in QA, But problm occurs to VF01 and CRM Process.
Simply if i select 0KE5 CRM problm will resolved.
Later SD Problem will come into the pictute.
Note: In PD1 System we hav not selected for 2011 also.
Pls put more inputs.

Balancing field "Profit Center" in line item 003 not filled during AFAB

Hello all,
We have activated business function FIN_GL_REORG_1 on EHP5 in ECC 6.0 and related reporting business function. One of the advantages of activating this for Fixed Assets is now asset balances can be reported at Profit Center/Segment level in sub ledger.
During executing depreciation, we are getting the below error message
Balancing field "Profit Center" in line item 003 not filled
Message no. GLT2201
Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 003, even after document splitting.
Below configuration is done in our system -
Document splitting is active with standard variants for FA accounts.
Segment Reporting is actived under Asset Accounting IMG (under Integration with General :edger Accounting)
Activation of account assignment objects is active for cost center and specify account assignment types for account assignment objects KOSTL is configured for all transaction types (*) for APC and Depreciation postings is activated.
APC, Accumulated Dep and Dep expense account field status groups are changed to have profit center and segment as optional fields for inputs.
After all these settings, I am still getting the above error message.
Can someone please let me know if you had similar situation and how to resolve this issue.
Thanks,
Praveen

Hi
Check the below locations
Fin Accounting(New)Fin A/c Global Settings NewLedgersAssign scenarios and Customer Fields to Ledgers (Here assign Profit Centre)
Fin AccountingGL Accounting NewBusiness TransactionsDoc splittingDefine doc splitting characteristics for GL Accounting (Here Profit Centre mandatory check) Check with Activate and Deactivate
Regards
Sridhara Rao D

In J1IH - Balancing field "Profit Center" in line item 001 not filled

Dear Sir/Madam,
Am doing Additional Excise JV in J1IH, when put some amount in AED filed and save getting the error as below
"Balancing field "Profit Center" in line item 001 not filled"
If any one have come across this error while doing Additional Excise JV in J1IH please help me in resolving this issue.
Note : Below points may be helpful for you to help me,
1. Document Splitting is active,
2. Profit center made mandatory,
3. The relevant GL is assigned in item category of classify GL step in Document Splitting process.
4. Substitution is only for FI documents.
Regards - Manjunath AR

Hi
One way is to maintain a default profit center for the transaction in FAGL3KEH. Else depending on your plant structure, you may write a susbstitution rule as
T Code = J1IH and Plant =X and G/L = 123221
Profit Center =200001
Regards
Sanil Bhandari

MIRO Error - Balancing field "Profit Center" in line item 001 not filled

Dear Experts,
Recently we upgraded to ECC 6.0 from 4.6C. We implemented new GL functionality.
We have also introduced new Profit Centers and have updated the same in Material Master.
Now, the new Profit Centers are valid from 01.04.2009 till 31.12.9999.
Now my problem is while doing MIRO after 31.03.2009 for old PO's i.e. the PO's which were created before 01.04.2009 the system gives me error "Balancing field "Profit Center" in line item 001 not filled".
This is because for the particular line item it picks the profit center from material master, but the validity of that (NEW) profit center is from 01.04.2009 whereas I want to do the posting in back date i.e. for eg. 28.03.2009. Due to which it does not get any profit center.
How do I resolve this problem. Is there any exit or BADI to do the same.
Regards...

Hi
There could be multiple reasons for this. Pls check on:
1. For the Expense Account assigned in DIF, have u made the assignment for deriving Profit Center & Business Area in T Code OKB9
2. Ask your FI Consultant to check the Splitting Characteristics for the MIGO. Check the Splitting Characteristics assigned to the Accounting Document Type assigned to T Code MIGO. Also check if all the GL Accounts have been assigned a splitting characteritics. The path is:
IMG> Financial Accounting(New)>General Ledger Accounting (New)>Business Transactions>Document Splitting
3. Do you maintain profit center as a default in material Master? If yes, check if the same has been assigned in the view extended for the plant concerned?
Pls check the settings. If any doubt, revert back.
Thanks & Best Regards,
rahul.

F-54 Balancing field "Profit Center" in line item 002 not filled Message no. GLT2201

Hi,
During F-54 error "Balancing field "Profit Center" in line item 002 not filled" "Message no. GLT2201" showing.
I have gone through previous posts with message no. I got below solutions but those applicable belongs to EHP 600 but ours is EHP 605.
1. Note: 930365 not applicable for EHP 605
2. Note: 887794 correction process according to note applies max EHP 600.
3. http://wiki.scn.sap.com/wiki/display/ERPFI/Document+split+when+clearing+down+payment+with+taxes
My querrys are If i apply above 2 & 3 points solutions what will happen. However instead of creation of new "Document type" if i do configuration changes for existing document type "KA" what will the negative impact and risk.

Dear Mr Rahul
Thanks for your suggestion
but there's something odd about this..
the other company code is working just fine for years..
and i've already maintain configuration both for doc splitting especially the splitting rule and GSP_KD1
yet the error still occur
is there any suggestion Mr Rahul?
or anyone?
Best Regards
Rumi

Balancing field "Profit Center" in line item 001 not filled in f-90

Dear Experts
the below error is comming at the time of procuring the assets with vendor in t code f-90
Balancing field "Profit Center" in line item 001 not filled
Message no. GLT2201
Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 001, even after document splitting.
System Response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this business purpose.
Procedure for System Administration
Customizing
Kndly help me on this
regards
venkataswamy

Hi,
1. Check the asset Master whether Cost center is assigned to asset.
2. In Cost center profit center should be assigned.
3. Specify Account Assignment Types for Account Assignment Object (ACSET)
SPRO → financial accounting → asset accounting → integration with the general ledger accounts →
Additional Account assignment Objects → Specify Account Assignment Types for Account Assignment Object.
You can make a generic entry, using an asterisk (*), for the transaction type. The system then uses the
account assignment type you entered for all transaction types for that account assignment object.
Do the same for all depreciation area then from asset master cost center will flow to accounting document
and form cost center profit center will get derived.
Regards,
Rohidas Shinde

Balancing field "Profit Center" in line item not filled

Similar Messages

Maybe you are looking for