Balancing load over DSL cards

I need help.I'm trying to configure one FastEthernet with 5 Vlans,and need to do traffic balancing over two Dsl cards.How can I do it?
I have attached the config of my router.
Thanks in advance.

Just saw this duplicate post with the configs ;)
ip route 0.0.0.0 0.0.0.0 ATM0/0/0.1
ip route 0.0.0.0 0.0.0.0 ATM0/1/0.1
this means you are already load balancing!
Do you have any reason to believe the loadbalancing is not happening?

Similar Messages

  • VDI Broker not balancing load over hosts

    Hi,
    I have a strange problem. Recently we added another host into our 2012 R2 VDI environment. We have approximately 50 desktops deployed over both hosts. The deployment of the collection and adding vm's works fine and I can see desktops from the collection
    over both. When people connect it always seems to place the users on host1, never on host2.  Host1 has approx 20 desktops running with 0 on host2 right now.
    I can't see any errors in the logs, and I'm a bit mystified as to why i do not get any connections on host2? How can i try and track down what it is up to?
    I think i've read before that the broker uses active machines/sessions as its basis so 15 vs 0 should definitely be enough to move new sessions to host2 i would think.
    Thanks for any pointers...
    David Hood www.consilium-uk.com

    Hi David,
    Thank you for posting in Windows Server Forum.
    From your description it seems that there is load balance issue for host servers. The connection is not getting load balanced. I think there is some misconfiguration takes place during the configuration. 
    Have you configure RD RAP policy? 
    You can follow below article for load balancing session collections.
    Step by Step Windows 2012 R2 Remote Desktop Services – Part 3
    http://msfreaks.wordpress.com/2013/12/26/windows-2012-r2-remote-desktop-services-part-3/
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • In-app purchase of Hellfire coins taken out of bank through Paypal, even though there was a balance left over from a gift Card in app store.

    In-app purchase of Hellfire coins taken out of bank through Paypal, even though there was a balance left over from a gift Card in app store.

    Biancasmum wrote:
    I transferred $8.50 into the visa debit card. Which made my balance in the card $8.50. I then made an in app purchase for $8.49.
    Did you allow for Local Taxes ?
    If not... your iTunes Account my be showing that Money is owed.
    No one here can see your Account Info as this is a User to User Forum.
    Suggest you Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact
    OR... add another couple of Dollars to your Card and try the Purchase again.

  • Load balancing / fail over

    Dear forum,
    Is there an other and more simple / "cheaper" way for load balancing / fail over then using RAC ? E.g. starting more instances againts the (same) database ?
    Thanks in advance,
    Michel
    Edited by: Michel77 on Dec 9, 2008 12:06 PM

    The answer would be highly platform and version dependent.
    On several platforms you have software implementing a 'shared nothing cluster'. This means you failover complete services to a second server, which is usually dormant.
    There is HP Service Guard, Suncluster, IBM HACMP, and Microsoft cluster, which are or can be configured as shared nothing clusters.
    For Microsoft there was or is, depending on version, Oracle Failsafe, on top of a MS Cluster.
    RAC can be configured in a shared nothing mode too. RAC itself is essentially active/active.
    On the other side, you can of course buy a second server, and use Dataguard to set up a standby database.
    For a physical standby database, which isn't enabled for more than 10 days, you don't pay a license.
    Setting up multiple instances on a single server is obviously not going to work. Those instances need to coordinate what they are doing. This is essentially the task of RAC.
    Hth
    Sybrand Bakker
    Senior Oracle DBA

  • TS1702 Am trying to find out balance on iTunes gift cards I loaded into account.

    How an I find the balance on my loaded iTunes gift cards?

    Go to i tunes and featured apps and scroll all the way down it should say it there

  • Why won't photo elements 11 load of the card I bought

    Why won't photo elements 11 down load from the card I bought

    drupydraws wrote:
    Why won't photo elements 11 down load from the card I bought
    Sorry what is "card I bought" mean?  Are you saying that somebody sold you a card with the serial number on it without the media (CD or DVD) to install from?
    If this is so then you could download the trial version from Adobe website and use the serial number you have got on the card.  If this is not what you meant, then please post back and explain again for us to understand the problem.
    Please bear in mind that these forums are used by people all over the world so some terminology might be different in different countries.
    G/L

  • HT201359 Can the balance on my prepaid card be displayed on my iPod Touch?  If so, how can I find it?

    Can the balance on my prepaid card be displayed on my iPod Touch?  If so, how can I display it before making a purchse?

    Alas, the Classic doesn't support radio. The basic classic can only play stored audio files. iTunes plays radio by streaming it over the network.

  • After loading Itunes gift card...thrown away months ago...now need verification code again....

    Hi All! My son received an itunes gift card for his birthday a few months ago.  He loaded the gift card onto his ipad and it worked a few times when he made some small purchases.  Now, months later (itunes card discarded) he wanted to buy a game to find that it requires payment verification (using the verification code on the back of the gift card which is gone). His account shows a balance but evidently he cannot use it with the code.  Is there a way around this?

    Under Account Settings....
    it says "Your credit card is about to expire. Please update your payment method."  It has the last 4 digits of a credit card that we don't recognize so we are assuming it must be the iTunes card he loaded last April. It's asking for the "Security Code".  The expiration date month is also in red with the number 2 next to it (meaning February) and the Year is masked with the four dots.

  • The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

    The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

    I tookyour suggestion and SUCCESS!  I can now access the Itunes Store.  A simple fix, and thanks so much!!.
    Below is the advice you forwarded:
    I found a solution to my problem.
    > start menu
    > accessories,
    > right click on the command prompt icon and choose "run as administrator".
    Once it opens, type in the following command...
    netsh winsock reset
    hit enter
    You should get a message that the winsock reset successful and you will need to reboot your computer.
    Reboot and when I reloaded itunes the store loaded fine.
    Thanks again, -Dean Stoneburner

  • I reset my password for my apple id account now I can't access my current balance on the gift card I just redeemed. What do I do?

    I reset my password for my apple id account now I can't access the rest of my balance from
    the gift card I had just purchased.

    Hi there,
    You may need to force quit the application. Take a look at the article below for more information.
    Mac OS X: How to quit an unresponsive application using Force Quit
    http://support.apple.com/kb/ht3411
    -Griff W.

  • How do I tell iTunes to use the balance in a gift card to purchase music instead of charging my credit card?

    I'm trying to use the balance from a gift card to buy music for my iTouch, but the system keeps trying to charge my credit card.   How do I use my balance???

    http://support.apple.com/kb/HT1364
    http://support.apple.com/kb/HT1203
    http://docs.info.apple.com/article.html?path=iTunesWin/9.0/en/27554.html
    This is the best guide:
    http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive

  • I have $8.05 balance on my gift card. I tried to buy an app more expensive than that so i had to add my credit card to the apple account. But I couldn't use the balance from the gift card anymore. How can I select to use it? or did I lose it?

    I  have $8.05 balance on my gift card. I tried to buy an app more expensive than that so i had to add my credit card to the apple account. But I couldn't use the balance from the gift card anymore. How can I select to use it? or did I lose it?

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    The MAS should use any credits first and then apply the remainder to a listed bank card.

  • How to load a java card applet into a java card

    Dear All,
    I am a novice to java card technology..
    I have done some search on how to load a java card applet into a smart card but haven't found a satisfactory answer. I have read about installer.jar and scriptgen tool but I want to load the applet from a java program and not from command line. It would be of great help if somebody can help me out.
    If somebody can share a sample program which load a javacard applet(.CAP file) into a smart card, I will be very thankful.
    I am able to find some client applications which help us send APDU commands and recieve response APDU's to interact with an applet loaded on to the smart card but not application which actually load the applet.
    I have heard of OCF and GP.. some say that OCF technology is outdated and no longer in use.. can somebosy throw some light on this too..
    cheers,
    ganesh

    hi siavash,
    thanks for the quick response.. i checked out GPShell as suggested, it looked like a tool by which one can load an applet on to card and send some sample apdu commands... but I want to load the applet from the code.
    My application should look something like this.. it will be a swing applicaton where I have a drop down with a list of readers, I select the one desired and then click on "LOAD" after inserting a blank java card, at this point my applet which is stored in my DB should get loaded on to the java card. The next step should be to personalize it where I enter the values for the static variables of my applet and click "PERSONALIZE", at this point all these values should be embedded into APDU commands and sent to the java card for processing.
    For achieving this I am yet to find a comprehensive sample or documentation on the net.
    Please help...
    regards,
    ganesh

  • Export Release Build Flash Builder 4.5 fails to load over the web.

    Exported Release Build Application fails to load over the web.  You can reproduce using the following steps:
    1. Create New Flex Project in Trial Flash Builder 4.5.
    2. Use the default Flex 4.5 sdk.
    3. Configure as a web application.
    3. Place the following MXML code in the main application file:
    <?xml version = "1.0" encoding = "utf-8"?>
    <s:Application xmlns:fx = "http://ns.adobe.com/mxml/2009"
    xmlns:s = "library://ns.adobe.com/flex/spark"
    xmlns:mx = "library://ns.adobe.com/flex/mx"
    minWidth = "955"
    minHeight = "600">
    <fx:Declarations>
    <!-- Place non-visual elements (e.g., services, value objects) here -->
    </fx:Declarations>
    <s:TextArea text = "Hello World!" width = "100%" height = "100%">
    </s:TextArea>
    </s:Application>
    3. Save the main application file and Export Release Build to bin-release.
    4. Place all files in bin-release on IIS web server in a web accessible location.
    5. Go to the web accessible location in any browser with newest flash player and view the application's html page.
    Actual Results:
    Flash movie appears blank. Context menu shows Movie Not Loaded. Network traffic shows application main swf downloaded. Framework dependent swfs not downloaded.
    Expected Results:
    Movie loads. Hello World! appears in text box. Context menu does not show Movie Not Loaded. Framework dependent swfs downloaded.
    Workaround (if any):
    Deploy on an Apache web server.
    The tests were run on IIS 7.x (7.0 for one, and 7.5)
    Flex application was built using Flex 4.5.0 SDK pre-bundled release (built-in flex 4.5 with Flash Builder 4.5 trial) on Mac OS X 10.6.7 (10J869)
    Flash Player 10.3.181.14
    Example failing website:
    http://staging.ibenergy.com/Test.html
    Any idea as to why my exported release build fails? Any help would be appreciated.

    Just tried this out on an IIS server with Flash player 10.3.181.14 - it worked.
    Are you using the release version of Flash Builder 4.5 with the release version of Flex SDK (not a prior SDK build)?
    The URL you mentioned gives me a 403 forbidden error.
    -Anirudh

  • Hi, I loaded an iTunes card and bought an audiobook a few weeks back! I was unable to download it because my wifi was down, my wifi has just been fixed but now my audiobook purchase is not available but the cash has been taken? Any ideas how to solve this

    Hi, I loaded an iTunes card and bought an audiobook a few weeks back! I was unable to download it because my wifi was down, my wifi has just been fixed but now my audiobook purchase is not available but the cash has been taken? Any ideas how to solve this

    When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive.  It would be a few months old so it wouldn't have the complete library on it....any ideas?  I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

Maybe you are looking for