BAM 11g - creating new report - More options not active
I am creating new reports in BAM 11g. 11.1.1.3.0 Build 8553
I can select the Data Object and Data Fields, but.... When I select any of the More options.... such as Create a filter or Create a calculated fied etc... I get the View Prompts screen and I cannot get out of it.
The Properties object works, but as soon as I go back to the Data Objects - I am on the View prompts screen with several unlabelled tabs... and I can only OK, Cancel or Save.
If I re-edit the reprt - I go straight to this View Prompts Screen... and can do nothing on the data objects.
Rebooting makes no difference....
Has anyone else seen this.
I am using JDK 1.6.0_14... which i picked up from a post in the forum.... but this has made no difference.
Thanks
Cliff
There must have been a typo or something when I reset the Java version.... re applying the copy of JDK 1.6.0_14 and restarting, Fixed the problem.
Similar Messages
-
ARD 3.3.2 does not create new reports
Hi all!
I am running ARD 3.3.2 on my MacBook Pro with Mac OS X 10.6.2
All my clients are on ARD client 3.3.2 as well but run Mac OS X 10.4.11 or 10.5.8.
Since I've updated to 10.6 and ARD 3.3.2 i am not able to create new reports (with rebuild with new data check box activated) on any client system. ARD starts the task and stays in the status "waiting for report data" (which is translated from its German version and might be called a little different in English).
And there it stays--- for a very long time until I get an task failed message.
All clients are in the same network segment as I am. I am able to observe and control all machines as well as copy and install software onto them. Clients have no firewall activated.
All clients have one Admin User installed , which is allowed to make full use of ARD functions. When adding the clients to my ARD Computer list I used this Admin User credentials.
Does the new ARD doesn't support older OSses any more??
Any ideas , how am I able to solve this and get reports going again???
Thanx
Holger
Message was edited by: Holger Bartsch (added some more detail to client setup)I manage 400+ computers at a University using ARD 3.3.2 with Client 3.3.2. I can not generate reports and haven't been able ever since Snow Leopard came out. We also have a developer account and there is no upgrade or version 4 in the works. Perhaps Apple's focus on giving iChat remote access has made them forget about Apple Remote Desktop, which is a shame because it's such a wonderful product.
We've been looking at Net School Support [http://www.netsupportschool.com/audio.asp] It's not as robust, but I can't continue spending money on a product/company that doesn't care about it's customer's problems. In general Apple's enterprise software efforts seem to be losing functionality instead of improving. OS 9 ARD had audio chat features, non-freezing screen lock and of course, working report generation. -
I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...
Hi Leo22,
Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments -
Oracle Reports 11g - Add new report server
I have installed Weblogic 10.3.2 and Forms and Reports 11.1.0 ontop.
I have configured my forms in the same way as 10g iAS, by adding to formsweb.cfg etc etc. The forms are fine.
On 10g iAS reports, I used to select the report item from the iAS OEM screen and then edit configuration, changing the sourceDir, tempDir and cacheDir.
Alternatively, instead of uning the in-process server, how can I add a new report server and use that intead? I would prefer to add a new report server. I cannot see the section in the doco that explains this.Hi,
Creating new reports servers isnt too bad in 11g. Please see the following oracle note on creating additional reports standalone reports servers for 11g Reports running on WebLogic: Oracle Note 961174.1
Hope this helps.
Thank you,
Gavin
http://www.pitss.com -
Steps to follow while creating new report...
HI friends,
Can any one please help me with the things to keep in mind and the process to follow while going for creating new reports in BI 7.0. We are about to create some new reports ., also the things to keep in mind while getting the requirement gathering...from the core users, firstly the basics to keep in mind and then the finer details technically to logically attempt will greatly help me to accelerate things further,
very many thanks in advance....Hi,
Get the report layouts from the business.
Try to limit the data set to a minimum in the report. Decide with the business what chars they would like to have in the variable screen.
Discuss and decide with your users what they want by default to appear in the report output. The rest of the chars could be put in Free chars and could be drilled down.
Check if users have to be restricted to some characteristic values. You would need to create authorization objects and attach these to users. Get the list of users and what chars and values they need authorizations for.
1. Try to avoid Exclusions in RKFs/selections as these degrade performance. Try to include char values instead.
2. Check if query read mode is set to H - read while navigating and expanding hier (RSRT --> properties). This way the entire dataset is not read from the database at once.
3. A lot of navigational attributes also affect performance. See if you can add it as char in the backend and read master data while loading.
Edited by: Murali Krishna K on Feb 2, 2011 11:38 AM -
Report template error when creating new report via SAP menu
Hi everybody,
we have the following error on our system:
When trying to create a new crystal report on a SAP query, using the entry "Create new report from a SAP query" in the SAP menu an error occurs: An error ocurred while generating a new report template
The error message appears after the SAP logon and the SAP query selection.
I think this error is related to the report templates of Crystal...
Is there any default template for SAP integrated queries?
We are using Crystal Report 2008 SP2 with SAP Integration Kit.
Thanks for any helps and comments.
SebastianThe following SAP note might help you
[https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333333363337333633343330%7D.do]
Regards,
Raghavednra.G -
Create new report in report painter
Hi
Can any body let me know the steps for creating new report in report painter.
Thanks in advance
PrasadHi Hari,
Please find below mentioned and overview on report painter and its usage.
The Report Painter is similar to the Report Writer, but is simpler to use. Most of the functions in the Report Writer are also available in the Report Painter. The Report Painter is based on the WYSIWYG (What You See Is What You Get) principle.
Report Painter Structure:
Characteristics must be defined in your report, either as data selection criteria, report rows, or report columns. To improve processing time, you should specify all characteristics in general data selection that are not needed in the report rows or columns.
The process flow used for creating reports using report painter can be summarised as following.
Create set->Select library->Define report->Check report->Assign report to report group->Generate report->Execute report
Hope i had been of help to you, please reward points.
Rgds
Manish -
Is there a way to create new reports in Solution Manager 4.0 without doing ABAP development or customization?
The reports in SOLAR_EVAL are not enough and we will require new ones.Hi,
There is no way that you can craete a report without doing ABAP dev. or customization. How can you think this way? Solution Manager is again a Separate SAP Instance every dev./customization funtionality of your R/3 or any of your XYZ SAP server holds good for SOLMAN aswell.
Hope this solves your question.
Feel free to revert back.
--Ragu -
Problem creating new reports in 11.1.1 - still retains prior reports POV
I have a problem creating new reports in 11.1.1 - it still retains prior reports POV. Example - I create one report - which shows "all locations". I then want to create another report, with a different POV, specific for just one location "North America". If I try to start with the original report and change the POV, the older reports default to the newest reports POV. I tried saving the grid with a different name, I tried creating a report from scratch (not using any prior reports, objects or grids) and I still get the same result. I also tried to use a new database connection - still no luck.
Any suggestions? Am I missing a critical step?
Going forward, what is the best approach to take to create several reports, with differing POVs? (example, the period and fiscal year may differ, or a location may differ). I want the reports to run, without using one report and chagning the POV each time.
Thanks,
LindaI think this is on the same lines as this question > HOW TO SET FR POV PER REPORT, NOT PER CONNECTION ?
Cheers
John
http://john-goodwin.blogspot.com/ -
i have backed up my iphone 5 and have a 5s I want to set up from that backup file. I have gone through the process once, and when I next connect the new AND the old phone to the mac and open itunes, restore or create new phone comes up not synch?? Tried starting the whole process over once but same result. Seems not to recognise the phone and just synch as it should. Help?
Hello CosK,
The following guide can step you through the process of using a backup of your iPhone 5 to transfer your content to your iPhone 5s.
Transfer content from an iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Should one or both of your phones fail to appear in iTunes, the following article provides troublesooting steps that can assist.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen -
Create new child accounts under an active account with transactions
Hi experts,
I've searched on the forums but could't get to a definitive conclusion.
Is there a way to create new child accounts under an active account with transactions?
I have an account 6226 with transactions.
The customer would like to divide this account in 4 new accounts:
62261, 62262, 62263, 62264.
B1 gives an error when I try to change the account to title which is undestandable but I imagine that should be a way to do this beacause with time the customers needs can change...
Thanks everyone!Hi,
Welcome you post on the forum.
B1 has only one level for active account. You can get the definitive conclusion that it is not possible to have child active account.
Thanks,
Gordon -
Resource Tab Create/delete/Display role is not active
Dear Friends,
I have been trying to work on cprojects 4.0, i encountered one issues. I tried exploring all the threads on the forum related this issue, but i could not find any resource related this issue.
in Resource Tab Create/delete/Display role is not active, they are grayed out.
I have maintained all the authorization
1. Roles for my user id are:
SAP_CPR_PROJECT_ADMINISTRATOR
SAP_CPR_PROJECT_LEAD
SAP_CPR_USER
i also have SAP_ALL
0SAP_ADMIN Project Role 'Administration'
Default Authorization : ResMan,Write
Z13_CONSULTANT Consultant
Default Authorization : ResMan,Write
Z13_DEVELOPER Developer
Default Authorization : ResMan,Write
Z13_PROJEKTLEIT Project Manager
Kindly request your valuable inputs.
Thanks and Regards
MukeshHi Mukesh,
Please go to following SPRO setting:
Collaboration Projects -> Resource management -> Qualification Management -> Activate Qualification Search and Matchup Using WFM Core
Delete the X under Value abbr. for Group WFM and Sem. abbr. QUINC. This will deactivate use of WFM.
Hope this resolves your problem.
Regards,
Niraj -
How to Created custom report for Ship not Billed (SD/FI)?
Hi all,
I am anticipating to write some abap reports..Here is one of them..
Anyone can help me with writing a Report , how to do 'Custom Report for shipped not Billed(SD/FI)' ..But since I am new to Abap , if you wish to reply, please use a little more detail and simple explanation, step by step so I can understand what is the idea, how it can be acheived...what kind of report should be used , techniques, tables etc...:)
Appreciate your help!
Regards,
BobyHi Boby,
You need to create custom transaction to achive these results.
you will have selection-screen ,it would be :
Date : Here date would be mandatory - Ranges Option
Customer - Optional field - Ranges
Order # Sales Order (Optional) Ranges
Invoice # - Invoice # (Optional) Ranges
You will get the data based on ur selection-screen criteria ...
First you will have customer order details from diffrent table
VBAK,
VBAP,
LIKP
LIPS
VBRK,
VBRP
KNA1,
VBFA Tables ( See the my sample program )
Output would be :
Customer # Custome Name Order # Delivery # Invoice # Netpr, Netquantity ,
Check the condition whether invoice table has VBRK-RFBSK = ''.
See the my sample program : This is sales report by monthly..
REPORT ZFDSALES_REPORT no standard page heading
message-id zwave.
Data Declaration Part
TYPE-POOLS
type-pools : slis.
Tables
tables : VBAK,
VBAP.
Internal table for VBAK Table
data : begin of i_vbak occurs 0,
vbeln like vbak-vbeln,
bstnk like vbak-bstnk,
vdatu like vbak-vdatu,
end of i_vbak.
Internal table for VBAP and MATNR
data : begin of i_vbap occurs 0,
vbeln like vbap-vbeln,
matnr like vbap-matnr,
kdmat like vbap-kdmat,
kwmeng like vbap-kwmeng,
netpr like vbap-netpr,
maktx like makt-maktx,
end of i_vbap.
Internal tables
data : begin of i_sales occurs 0,
vdatu like vbak-vdatu,
bstnk like vbak-bstnk,
matnr like vbap-matnr,
maktx like makt-maktx,
kdmat like vbap-kdmat,
kwmeng like vbap-kwmeng,
netpr like vbap-netpr,
end of i_sales.
Variable for ALV
data : v_repid like sy-repid,
gt_fieldcat type slis_t_fieldcat_alv.
Selection-screen
selection-screen : begin of block blk with frame title text-001.
select-options : s_vbeln for vbak-vbeln,
s_erdat for vbak-erdat,
s_ernam for vbak-ernam,
s_vdatu for vbak-vdatu obligatory,
s_BSTNK for vbak-BSTNK,
s_KUNNR for vbak-kunnr,
s_matnr for vbap-matnr,
s_KDMAT for vbap-KDMAT.
selection-screen : end of block blk.
Initilization
initialization.
v_repid = sy-repid.
S T A R T - O F - S E L E C T I O N ****************
start-of-selection.
Get the data from VBAK and VBAP Tables
perform get_vbak_vbap.
E N D - O F - S E L E C T I O N *****************
end-of-selection.
Display the data
perform dispolay_data.
*& Form get_vbak_vbap
Get the data from VBAK and VBAP Table
FORM get_vbak_vbap.
Get the data from VBAK Table
select vbeln bstnk vdatu from vbak into table i_vbak
where vbeln in s_vbeln
and bstnk in s_bstnk
and vdatu in s_vdatu
and kunnr in s_kunnr
and erdat in s_erdat
and ernam in s_ernam.
if sy-subrc ne 0.
message e000(zwave) with 'No data found for given selection'.
endif.
Get the data from VBAP Table
select avbeln amatnr akdmat akwmeng a~netpr
b~maktx into table i_vbap
from vbap as a inner join makt as b on bmatnr = amatnr
for all entries in i_vbak
where a~vbeln in s_vbeln
and a~kdmat in s_kdmat
and a~abgru = space
and a~matnr in s_matnr
and a~matnr ne '000000000000009999'
and a~matnr ne '000000000000004444'
and a~matnr ne '000000000000008888'
and a~matnr ne '000000000000001111'
and a~werks = '1000'
and b~spras = 'E'
and a~vbeln = i_vbak-vbeln.
if sy-subrc ne 0.
message e000(zwave) with 'No data found for given selection'.
endif.
sort i_vbak by vbeln.
sort i_vbap by vbeln matnr.
loop at i_vbap.
read table i_vbak with key vbeln = i_vbap-vbeln
binary search.
if sy-subrc eq 0.
i_sales-bstnk = i_vbak-bstnk.
i_sales-vdatu = i_vbak-vdatu.
i_sales-matnr = i_vbap-matnr.
i_sales-kdmat = i_vbap-kdmat.
i_sales-maktx = i_vbap-maktx.
i_sales-netpr = i_vbap-netpr.
i_sales-kwmeng = i_vbap-kwmeng.
append i_sales.
else.
continue.
endif.
clear : i_sales,
i_vbap,
i_vbak.
endloop.
sort i_sales by vdatu bstnk matnr.
refresh : i_vbap,
i_vbak.
ENDFORM. " get_vbak_vbap
*& Form dispolay_data
Display the data
FORM dispolay_data.
Fill the Fiedlcat
PERFORM fieldcat_init using gt_fieldcat[].
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = v_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = gt_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = i_sales
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
ENDFORM. " dispolay_data
*& Form fieldcat_init
text
-->P_GT_FIELDCAT[] text
FORM fieldcat_init USING e01_lt_fieldcat type slis_t_fieldcat_alv.
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
Delivery Date
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'VDATU'.
LS_FIELDCAT-OUTPUTLEN = 12.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Delivery Date'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Purchase Order #Material Description
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'BSTNK'.
LS_FIELDCAT-OUTPUTLEN = 25.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Purchase Order #'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Material
CLEAR LS_FIELDCAT.
LS_FIELDCAT-REF_FIELDNAME = 'MATNR'.
LS_FIELDCAT-REF_TABNAME = 'MARA'.
LS_FIELDCAT-FIELDNAME = 'MATNR'.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Material #'.
ls_fieldcat-seltext_M = 'Material #'.
ls_fieldcat-seltext_S = 'Material #'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Material Description
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'MAKTX'.
LS_FIELDCAT-OUTPUTLEN = 40.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Material Description'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Customer Material #
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'KDMAT'.
LS_FIELDCAT-OUTPUTLEN = 35.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Customer material no.'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Quantity
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'KWMENG'.
LS_FIELDCAT-OUTPUTLEN = 15.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Quantity'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Net Price
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'NETPR'.
LS_FIELDCAT-OUTPUTLEN = 15.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Net Price'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
ENDFORM. " fieldcat_init
Reward Points if it is helpful
Thanks
Seshu -
Creating new report category in Abap HR
When I try and create a new custom report category, I get a message saying "Choose the key from the allowed namespace". I did use a Z report category (we do have Z report categories that have been created earlier by somebody else). It would be great if somebody could list the steps to create a new report category. By the way, I would just want to keep just the personnel number (PNPPERNR) in the selection option.
I did try using SM30 to create a new entry but got the same message as above.
Thanks.>
Lakshmi Srinivasan wrote:
By the way, I would just want to keep just the personnel number (PNPPERNR) in the selection option.
> I did try using SM30 to create a new entry but got the same message as above. Thanks.
You can use the Report category HRDKPRNR to meet your reqt.
~Suresh -
Creating a Report that Does Not Require a Target
I have several reports I'm building that work across all systems of a particular type. For example, I want to create a table of all of the systems with all of their software versions, another table with all of the systems and all of their free capacities and raid profile types (to best select a system to allocate capacity on) ...
As such, I would like to build a report where I do NOT have to choose a specific target. Is this possible?
My report definitions allow me to choose a type, but I can't find a way to say "but don't require a target", here is the report metadata for reference...
l_target_type := MGMT_IP_TARGET_TYPES();
l_target_type.extend(1);
l_target_type(1) := 'my_storage_type';
l_report_title_nlsid := 'Federated Capacity and Configuration Report';
l_report_owner := mgmt_user.get_repository_owner;
-- create a report definition for the report
l_report_guid := mgmt_ip.create_report_definition (
p_title_nlsid => l_report_title_nlsid,
p_description_nlsid => 'Display of Configuration Information',
p_owner => l_report_owner,
p_category_nlsid => 'Storage',
p_sub_category_nlsid => 'Storage Category',
p_late_binding_target_types => l_target_type,
p_show_table_of_contents => 1,
p_system_report => 1,
p_component_name => l_target_type(1)
);It is a bit more complex, but I will boil this down:
- Yes, I'm using the term System loosely, I am doing a query across a bunch of appliances in one case, there is no target identifier associated with it and, as such, the SQL does NOT include a where clause like i.TARGET_GUID = ??EMIP_BIND_TARGET_GUID?? so I would prefer the user does not have to select this
- In another case I am in a detail report and do not want the user to have to choose the target (you can refer to another post on this), but basically, I get a table back using the BIND_TARGET, the user can click a column to get details on the adapter (for example), they click on it and are confronted with a target selection. I would rather "carry over" the target selection from the master report or I suppose I could "hide" the target GUID in the master report and then pass it as a parameter (my detail reports, in this case, are not home page reports and can only be accessed through the master report)
Either way, I don't want to be confronted by the target selection.
Maybe you are looking for
-
TV out - iPod says it's playing on my TV but it's not.
I bought an iPod touch yesterday, and AV Component wires to hook it up to my TV. I used to do this with my regular RCA cables by switching the red and yellow but apparently you can only use Apple's wires for the new ones. But that's neither here nor
-
What program will work with SFTP backup program in 5.0(4)?
Who know how to backup the data from CM5.0(4) server to remote host via SFTP progarm?? The CM does not include a backup tape system, the CM only allow backup the data to remote side with SFTP. We had tried shareware from internet, but it does not wor
-
Hi, What is the best CLUSTER I can use for my 10g RAC on SOLARIS 10. Regards MMU
-
Previously, when I clicked on "write", a column of names from my email address book would show up to the left of the message box and now they don't. When I imported the personal and collected addresses, two folders of each showed up: an empty "Person
-
How do I turn off scrubby zoom in Illustrator CC2014?
It's bloody annoying, and I'd just like the marquee style highlight area to zoom back