BAM : Create Navigation Tree to Click and View Reports

Hello Everyone,
I am new to BAM. I know that BAM Active Viewer is the application used by the user to view reports. On the home page of this application user gets Select Report, Print Report, etc.. buttons to select and open a dashboard.
I have been asked to create a "Navigation Tree" so that user can select reports from the navigation tree on the left. Whatever report is selected is displayed on the right side. Can someone help me on How this can be achieved ?
I appreciate your help.
Regards,
SOADreams

short
i have a report that it was created on another server with a specific dsn
now i am trying to open the report on my machine
the database from the other server does not exist on my machine
the server machine where the report was created the ip its not accessible
question ?
can i open the report on my machine or its impossible ?
thanks

Similar Messages

Is it possible to create a tree with drag-and-drop functionality using ajax

I saw these samples;
Scott Spendolini's AJAX Select List Demo
http://htmldb.oracle.com/pls/otn/f?p=33867:1:10730556242433798443
Building an Ajax Memory Tree by Scott Spendolini
http://www.oracle.com/technology/pub/articles/spendolini-tree.html
Carl Backstrom ApEx-AJAX & DHTML examples;
http://htmldb.oracle.com/pls/otn/f?p=11933:5:8901671725714285254
Do you think is it possible to create a tree with drag-and-drop functionality using ajax and apex like this sample; http://www.scbr.com/docs/products/dhtmlxTree/
Thank you,
Kind regards.
Tonguç

Hello,
Sure you can build it, I just don't think anyone has, you could also use their solution as well in an APEX page it's just a matter of integration.
Carl

How do I create buttons that once clicked and un clicked, alter an image? ...

How do I create buttons that once clicked and un clicked, alter an image?
So for example if I imported a psd file into Muse with 5 layers, could i create 5 buttons which, when clicked, each individually took off and added 1 layer?
Basically this should make what i'm trying to say clear (when it's loaded click the arrow and you'll see): http://lust.nl/lustArchive/noordzee/noordzee.html
Appreciate any help

Hi Joe,
Please use this option to hide the target on click - http://prntscr.com/3plqn0
- Abhishek Maurya

Can we save and view reports generated by OBIEE in PDF format?

Hi,
Can we save and view reports generated by OBIEE in pdf?
Thank you,
Regards,
Gowtham Sen.

Hi Gowtham,
Put your request on a dashboard and you will see a print to button on th bottom left corner. Now you can save to pdf.
Good Luck,
Daan Bakboord

How to create navigational links...and connect views of another component

Hi...
I am new to SAP CRM...
I have a requirement where i need to navigate from the main window of a component to the view of a different component.
Scenario:
When i click on edit button after selecting a line item in the assignment block in the BT111H_OPPT/Details ,it should navigate to the details page of the line item which is the view of another component that has been created .say ZRP/PEL.
How can i achieve this using the concept of inbound/outbound plugs and navigational links?
I have got a vague idea on plugs from my search...that these are entry/exit points to views.
But what is the procedure to follow to attain the functionality?
How do we decide on which component needs which all plugs?
Anyhelpful pointers would be rewarded.
Also, an idea on what exactly does the inbound/outbound plugs do and how is the flow happening , how are navigational links working etc would be appreciated.
Thanks..

Steps to create navigational link:
1.     Create an outbound plug in the component from where you want to navigate. Sometimes
                standard navigational links are already there.. you just need to identify it.
2.     Create a Component usage in runtime repository for target component.
3.     Add this component usage to the main window view in repository.
4.     Create navigation link between the transaction type and the target component view.
5.     In the outbound plug, use the view manager to navigate to the target component. Ex:
                ME->FIRE_OUTBOUND_PLUG( IV_OUTBOUND_PLUG   = 'TO_OUTPLUG''
                          IV_DATA_COLLECTION = LR_COL ).
6.     Pass the data through the data collection.

Creating tables on SQL studio and viewing the table in the SAP system

i have just created a table using the SQL studio and wants to use it view it in the SAP system using the SAP logon. till now i have not found a way to create it therefore any help is much appreciated.

Hmm... you want to see tables via SAPLogon ??
Ok, let's assume you really want to access tables via ABAP instead.
For that you've two options:
1. Create the table in the ABAP dictonary (SE11) exactly like you created it in the database and activate the table.
After that you can access the table via SE16 or any ABAP as you like.
2. You don't create the table in the ABAP dictonary and use native SQL to access the data.
Neither of these options is meant to be the way to do it.
The correct way would be to design the whole table in the ABAP dictionary and create the table on the database from that.
regards,
Lars

How do I create an object with "click and drag" interaction?

I want do make an object that I can move around the screen at will, so, I need a way to make a click and drag object in adobe edge.
I also need this to work with touch devices and also to limit the movement of the object to one direction (x or y).
Thank you all in advance.

Thanks for your reply. I tried doing what you said, creating a command by opening a new flash file, etc. For some reason, I could make a rectangle and save that as a command, but making a shape using the polystar command didn't work - there was a red "x" next to it in the history panel.
Anyway, even if I could do that, it's not what I want to do. I want to be able to create a shape and then be able to change the shape dynamically. For instance, I want to be able to create a series of points and draw curves between them to create a closed curve shape. Then I want to be able to change the positions of the vertices so that the shape changes as the .swf is running. Thanks.

When trying to sign out of Hotmail the "back navigation button" remains green and I have to click sign out again and the same thing happens over and over and the only way to close Hotmail is to go to File and Close Frame, so what's my problem?

When I attempt to sign out of Hot Mail by clicking "Sign Out," I get the "Sign In" instruction as I always have, however, the green Firefox navigation button remains on bright green (not going to gray) and my MSN home page will not close automatically as usual. I click on the green arrow and I get an instruction to "Sign Out" again. I click on that and get the "Sign In" again but the arrow stays green. I can repeat this countless times and never get signed out and always remaining on the MSN home page. The only way I can close is to go to File and click on Close Window and then my homepage will close and go back to desktop. I've been using Firefox for a couple of years now (IE prior to that for ten years) and have never had this problem. After using "Close Window" I go back onto my home page, from the desktop, and the navigation button is grayed out normally until I sign in again and we start the cycle over again. Have I been hacked?
== This happened ==
Every time Firefox opened
== Approximately a month ago.

I was doing a side-by-side comparison of the new and old server (we backed up the server before the reformat) and I can see that, evidently, CR XI was installed. We have the directory C:\Program Files\Common Files\Business Objects\3.0 and all the versions match what is located in the project's bin directory. Does this confirm that I did have XI installed and licensed at one time?
If I purchase a more recent version, couldn't I update the reports to use the newer version? I have all the source code.
Thanks for your help, it is a nice sanity check for me after hours of reading forums and documentation.
Also, just a shot in the dark, but I'm assuming it wouldn't do me any good to simply restore the aforementioned folder to my C drive? Would that work if I registered all the dll's?
Edited by: Eric Hollering on Dec 2, 2009 6:40 PM
To be clear, I do have VS 2003 & 2005, and I have the source code. I just have never used Crystal Reports in any of my .NET apps because the need wasn't there, so recompiling is not out of the question.
Edited by: Eric Hollering on Dec 2, 2009 6:49 PM
Also, I looked at the CrystalDecisions.CrystalReports.Engine.dll that was in the C:\Program Files\Common Files\Business Objects\3.0\Managed folder and when I right-click and view the properties, then the Version tab, in addition to the 11.0.9500.2 version number, there is a property called Product Version that has the value .NET. Does that mean that this dll was bundled with Visual Studio?
I also found this directory on the old server...does this tell you anything?
C:\Program Files\Business Objects\BusinessObjects Enterprise 11
I did see that you can still buy XI from CDW. I have a call into them currently to check with Business Objects for any registrations from my company.
Edited by: Eric Hollering on Dec 2, 2009 8:27 PM

Newbie question about entity and view objects

Hi everyone,
My first ADF application in JDeveloper is off to a difficult start. Having come from a forms background, I know that it is necessary avoid using post-query type lookups in order to have full filtering using F11/Ctrl+F11. This means creating an CRUDable view and getting as much of the lookup data as possible into the view without losing the ability to modify the data. In JDeveloper, I do not know how to build my data model to support that. My thought was to start with a robust updateable view as my main CRUD EO and then create a VO on top of that with additional EOs or VOs. But, I have found that I cannot add VOs to another VO. However, if I link the VOs then I have a master-detail which will not work for me.
For example, I have two joins to CSI_INST_EXTEND_ATTRIB_V shown in the queries below and need to have that show in the table displaying the CRUD VO’s data. It seemed that the best way to do this is to create a CSI_INST_EXTEND_ATTRIB_V entity object and view object. The view object would have two parameters, P_INSTANCE_ID and P_ATTRIBUTE name. Both the building and the unit are needed on the same record, and this is not a master-detail even though it might look that way. (A master-detail data control will not work for me because I need all this data to appear on the same line in the table.) So, I need help figuring out the best way to link these to the main (CRUD) view; I want as much of this data as possible to be filterable.
select
cieav.attribute_value
from
csi_inst_extend_attrib_v cieav
where cieav.instance_id = p_instance_id
and cieav.attribute_code = 'BUILDING NAME'
select
cieav.attribute_value
from
csi_inst_extend_attrib_v cieav
where cieav.instance_id = p_instance_id
and cieav.attribute_code = 'UNIT NAME'
Ultimately, I need to display a ton of data in each record displayed in the UI table, so a ton of joins will be needed. And, I need to be able to add records using the UI table also.
James

Hi Alejandro,
Sorry if I caused confusion with my first post. What I had in mind assumed that I could have a single CSI_INST_EXTEND_ATTRIB_V EO with a BuildingVO and UnitVO on top of it. So, I wrote the queries individually to show how I would invoke each view. When I realized that confused the issue, I rewrote the query to explain things better.
Now having seen your 2 queries. You need to create 2 EO. One for each table. Then create an association between the 2 aeO (this will be the join you are talking about). Then, you need to create a VO based on one of the EO and after you can modify and add the second EO (in here you select the join type).
After your done with this, youll have 1 VO that supports CRUD in both tables.
There were three tables in the query: CIEAV_BUILDING, CIEAV_UNIT, and T -- the main CRUD table. When you say that I should create two EOs, do you mean that they are to be for CIEAV_BUILDING and CIEAV_UNIT? Or, CIEAV and T? Assuming CIEAV and T, that sounds like it would allow me to show my building or unit on the record but not both.
By the way, everything is a reference except for the main CRUD table.
Look forward to hearing from you. Thanks for your help (and patience).

Newbei tries to create hierarchical tree

hi all;
I'm pretty new to the oracle forms and I'm trying to create a system similar to forum.
I have created the following table at the database;
create table tblFrmData(
frmID number(2), -- forum ID
frmNodeID number(5),
frmParentNodeID number(5), -- the NodeID of the parent branch
frmSubject varchar(100), -- the subject ( will be the label of tree)
frmBody varchar(1000), -- the body of the message (will be the data of the tree)
Now I want to create a tree depending on the data in this table
I have created the tree with dragging and droping from the toolbar at forms. The name is tree8. It is in block3.
I have also created a record group and named it as RG. The select statement used while creating the RG was
select -1, frmNodeID, frmSubject,'', frmBody from tblFrmData
after that I have modified when-new-item-instance trigger of tree8 as following
declare
htree ITEM;
begin
htree:=Find_Item('block3.htree8');
Ftree.Set_Tree_Property(htree, Ftree.RECORD_GROUP, 'rg');
end;
this trigger was compiled without error.
when I save the form and try to run it the following error is given! And I do not know how to solve it although I have readed the referances and looked at the old questions in this forum.
frm-32089: trees must be in single row, single item blocks.
hierarchical tree item TREE8
Block: BLOCK3
Form: FORM_TREE
frm-30085:Unable to adjust form for output
I'm waiting for your answers
regards
erdem seherler

Just ensure that the Hierarchical Tree you have created is the only Item present in that Data Block.
Move all other items to a new Data Block.

Metadata Navigation Tree View in Quick Launch for Wiki Site

I have successfully enabled managed metadata navigation for an Enterprise Wiki Site. When new pages are created they get created in the term set and I have have organised them into a hierarchy that I want.
I would really like the quick launch to show a tree view of that managed metadata navigation hierarchy.
How could I achieve this? Would this require a completely custom SiteMapProvider along with some jQuery or similar to render the tree view?
Alternatively I am happy only showing a few levels of hierarchy with the OOTB quick launch, but I need to show the parent node for any given page I am on, to assist users navigating backup up. What control could I add just above the quick launch to show
the parent node?
Thanks for any help,
Richard

Hi Richard,
as i know there are some example at 2010,
http://markuspersson.wordpress.com/2012/01/19/add-metadata-navigation-on-custom-page-layouts/
http://tihomirignatov.blogspot.com/2010/08/how-to-use-metadata-navigation-in.html
perhaps you already tried some of the example?
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

BAM Activity and view issue on BizTalk server 2013 R2 machine.

Hello all,
I am trying to make BAM portal work since couple of days but no luck yet...
I ma using BizTalk server 2013 R2.
I am trying to deploy the activity and view from my Development server to Test server ( it's working fine on Developemnt).
I have gone through one post and found this and followed steps here is the output for that :
First confirm that you can see the name of the activity in the list of deployed activity by executing this command:
bm.exe get-activities
--> I can see the activity name in there so I belive that activity is got created.
While creating the BAM activity you must have created/deployed a view get the name of the view by using this command:
bm.exe get-views -Activity:<activity name>
--> I can see the view name in there so I belive that view is exist.
You need to provide permission to the account you are using to access the BAM portal on this view by using this command.
bm.exe add-account -AccountName:”<AccountName>” -View:<viewname>
--> while executing this command is got error as :
Using 'BAMPrimaryImport' BAM Primary Import database on server 'TESTSERVER'...
ERROR: Security management of the BAM view failed.
The SQL role for the specified view is missing.
Note : My BAMAlert service is running and running using
GROUP\~biztalkservice account I am logged on Test Server using "NitinUser" account with administrator rights.
What does this mean - if this mean that I needs to give rights to my user (NitinUser) on SQL Database please tell me how to do that ? with command....
Thanks and Regards, Nitin.

Hi Nitin,
Can you try the solution as suggested by Thiago Almeida.
http://connectedthoughts.wordpress.com/2008/06/16/bam-deployment-gotchas/
His solution for this problem is to remove the view and re-add it, which worked for him. Obviously I didn't encounter this error, so have to suggest the solution from community.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.
Hello Ashwin,
As per that post the author was having issue that view was not created ...
also have noticed one thing that by executing following command in sql management studio.
use
BamPrimaryImport
SELECT
SUSER_SNAME(owner_sid),nameFROMsys.DATABASES
on my development box it's showing my user GROUP\nitinUser and Name = CustomBizTalkDB
but when I execute this on TEST server, entry for GROUP\nitinUser is not in database
Thanks and Regards, Nitin.

30EA1 /2.*: Double-clicking objects in the navigator tree

Hi,
There is an inconsistency in double-clicking objects in the navigator tree:
When Preferences - Database - ObjectViewer - Open Objects on Single Click is checked, double-clicking e.g. a table in the navigator will still open it the same way as single-clicking it.
However, when Preferences - Database - ObjectViewer - Open Objects on Single Click is not checked, double-clicking the table in the navigator will open it, and expand the columns. The latter is quite irritating, especially on large tables.
Can this be bugged, so double-clicking the table in the navigator will just open it?
Thanks,
K.

The node is expanded on double click irrespective of what the preferenceIs this a typo or does it really expand always for you? For me it only expands with "single click objects" disabled.
windows explorer also does the sameYes, and I'd even say that's the desired behaviour, especially since it's the only action taken.
Common sense and standards are against taking 2 different actions at the same time. One should override the other.
Ideally, double click with "single click objects" disabled would just open the object, and double click with "single click objects" enabled could expand the node as in the Windows Explorer (but doesn't have to).
So that's almost completely the other way around as we get it now.
Thanks,
K.

How to create a tree view to show hierarchy

Hi all,
i am new in plugin development.i need help in creating a tree view to show hierarchy.i gone through sdk\paneltreeview example.but not getting clear idea how to create child node.and how to display it..i want to create a simple tree view which displays my custom data as root\child in hierarchy as i want.
thanks..

I did this in CS3 a few weeks ago...
1. subclass NodeIDClass to create your node id class.
2. subclass ITreeViewHierarchyAdapter to create the adapter
3. subclass CTreeViewWidgetMgr
4. in your .fr file, define two "Class"'es based on kTreeViewWidgetBoss (with Interface IID_ITREEVIEWWIDGETMGR and IID_ITREEVIEWHIERARCHYADAPTER) and kTreeNodeWidgetBoss.
Btw, I put down "persistentlistui" in my note so I guess I looked at that sample instead of the paneltreeeview.
Good luck.

I have created a site with iWeb. I have replaced the iWeb Nav bar with a vertical one I made myself. Problem is, my top button disables itself if it overlaps into the "hidden" nav bar area. I can cmd click and drag it into this area, but then all the rest

I have created a site with iWeb. I have replaced the iWeb Nav bar with a vertical one I made myself. Problem is, my top button disables itself (and the animation doesn't work) if it overlaps into the "hidden" nav bar area (indicated by a blue rectangle). I can cmd click and drag it into this area, but then all the rest of my site is pushed down the page. Don't know what to do about this. I don't know how to bring the rest of the page up without dragging it also into the designated nav bar area. Also, by doing this, is it affecting my site in ant way? see my site here at www.steveburrowsimages.com
The home page is with it all draged into the nav bar area and the about page is with is outside the nav bar area (notice that the top button does not animate or work as a button.
Getting confused here. Anyone got any ideas?

Well, you made a good start with SEO by getting rid of the iWeb default navigation since it doesn't help the spiders and, out there in the real world, there are more people than you would think with javascript turned off in their browsers.
One of the downsides of iWeb is that it doesn't allow for the alt attribute in the img tag. Its well worth adding these to give you extra keywords even if you have captioned all your images. Use iWeb SEO Tool for this...
http://www.iwebformusicians.com/Search-Engine-Optimization/Tags.html
iWeb, just like most drag and drop software, creates a huge amount of code which causes the pages to load slowly in the browser. Running you files through an optimizer will help to reduce this problem and further reduce the size of image files even beyond the initial optimization you do before loading them into iWeb...
http://www.iwebformusicians.com/Search-Engine-Optimization/Optimize.html

BAM : Create Navigation Tree to Click and View Reports

Similar Messages

Maybe you are looking for