BAM database creation problem in Enterprise Server

Hi,
We are trying to create a new database and config BAM inside the Enterprise Server. We have already created the engine db and the directory service db but we did not start the BAM or create any db or configure anything for BAM inside the Enterprise Server.
Now when we create a new external resource to create a new db for BAM and then goto Process Monitoring ---> Manage Database
and then create a new database and a new data structure and enter the Database Administrator User and the Database Administrator Password, it gives us an error:-
Username and password already exists and it could not be created..
We have tried all usernames and passwords but could not create the BAM..
We also used the system user and the password..
What could be the possible problem? Do we have to create the BAM db while configuring the engine db and directory service db or can we start and configure BAM later?
How do we resolve this problem?
The documents do not specify what is the
Database Administrator Password
and
Database Administrator User is?
What are these?
Anybody knows?

Hi,
Lilach's tip should get you going.
Suspect you won't need it, but here's a link to a BAM installation document I wrote that might also help you with your Oracle BPM 10g installation - http://www.4shared.com/file/136283546/ca086174/ALBPM_60_-Configuringthe_BAM_Updater.html. It's an update of the excellent ALBPM 5.7 BAM installation document that Gustavo in Customer Support wrote a few years ago. Although it was written for ALBPM 6.0, the steps will work with Oracle BPM 10g.
Here's another thread on this forum regarding BAM installation - Re: Problems with the albpmwarehouse service
Hope this helps,
Dan

Similar Messages

Add MS Access Database 2007 to BusinessObjects Enterprise Server

Hello,
I'm new to BusinessObjects Enterprise.
I have a Access Database locally on my machine. I want to add this database to the BusinessObjects Enterprise server, so others can access the crystal reports that I have created out of this Access database.
What should I do to accomplish this task?
Please provide me some help
Thank you
Angel

Thanks for your quick response.
My local Access database is not accessible from the server. so where should I place the DB? in the server itself?
and then create a ODBC connection to it?
please advice
Thank you

Database creation problem on Windows XP

Hello Readers
I have installed ORACLE Database Engine on windows XP.
I am facing problem in database creation.
I have tryed wizard as well as mannual method.
in wizard at 90% it gives an error "END-OF-FILE ON COMMUNICATION CHANNEL"
although CD drive is in CR Rom drive.
Please help me ....
Rashid Masood Ashraf
email: [email protected]

After going to the properties as you suggested:
Right now the Obtain an IP address automatically is checked
I need to check the Use the following IP address:
What should I enter for
IP address:
Subnet mask:
Default gateway:
Please help.
Edited by: Nel Marcus on Dec 2, 2008 3:49 PM

Database creation problems and parition consolidation

This is my first time on here so please look past my green-ness. =)
I Installed Oracle 8.1.7 successfully and opted to setup the database creation later so I could put the database on another partition. Well, I tried once to create the database on the partition I installed oracle onto (/oracle) but I had insufficient space, It said I needed 1.3 gigs. My "/database" partition is only a 1 gig parition (and /oracle is 2 gigs). My plan was of course, to seperate them.
Ok, I didn't see an option to create the db on another partition so I resigned to using /oracle. My question now is, is the 960 megs on /oracle enough to create the database? I used the custom setup so I could see how everything was broken down and I noticed that my rollback segment is 500 megs. Is this necessary? Can I get by with 100 megs and be fine? Also, if I did do this, I'd have approximately 100 megs free for data, this is enough I hope??
Lastly, I need to combine the partitions somehow without effecting /. The hard drive is broken down into:
gigs
5.5 /
2.0 /oracle
1.0 /database
Does anyone have any ideas? In windows, I used partiton magic but I don't know if there is a linux version.
One more thought (last one for real =), it had 50 megs allocated for it's shared memory pool. I'm assuming this will take away from the 128megs I have thus effectively making only 78 available to X, will this cause any noticeable problems other than a bit of slowdown? I have most if not all of my virtual memory free at all times. I know I should get more ram, but you know how the budget thing goes...
Any help would be greatly appreciated,
Rob

Try running the catalog and catproc sql scripts.
$ cd $ORACLE_HOME/rdbms/lib
$ svrmgrl
connect internal
@catalog
@catproc
That will set up all of the internal views and packages that
oracle needs to do DDL.
Scott
Don DeLuca (guest) wrote:
: I'm gotten through the install and created the database. The
: database comes up, I can do some simple stuff like create a new
: user, create a simple table but when I try to run SQL DDL
: statements I get errors saying: "recursive SQL error". I
: looked at the sql.log file after the install. It doesn't look
: like all the packages were created successfully. Have others
had
: similiar problems with the system table/package creation? To
me
: it looks like a DDL that was needed was not called during the
: install and later caused problems during package creation.
: This is my fourth time installing and I have the same problem
: each time. I also tried to run the plsql.sql file to recreate
: some of the packages but this did not work either.
: I've just about given up and I'm starting to realize why its
: free.
null

Database creation problems

Help!! I have installed 8i on RH Linux 6.1 and followed the "Friendly" guide steps, it worked perfectly. However when I try to create a database using the Database assistant, I get an error "Oracle Not Logged on" I've reinstalled twice and still have the same problems - can anyone help?
Thanks for any suggestions/help!
null

This problem doesn't just occur on Linux. I have encountered the same on both Digital Unix and HP/UX. I finally gave up and told it to just create the scripts. Looking at the scripts, there are a number of different problems depending on the items that you choose to install and/or customizations to db setup, such as size and placing of files.
To find them, I generated the scripts and then looked at the contents and used svrmgrl to individually run commands so that I could see the "real" error message.
It's been awhile but I think the not logged on was a failure in the initial create database command... Or maybe it was the MAX_ENABLED_ROLES being too small in the default init file to support some of the products... Or the rollback segments being created as private and not being automatically added to the init before the assistant does a shutdown and restart... Or it creating the rollback segment tablespace not the size and parameters that I requested...
You may guess by now I wasn't too impressed by the dbassist program. All I can say is doesn't anyone believe in testing anymore? I have a hard time believing that anyone at Oracle actually tested running this product and actually using any of it's features.
This really pissed me off because when I first saw the pretty GUI and nice interface I thought WOW, this is great, finally something to make database creation simpler than running all those commands and scripts.

LiveCache Installation (Database creation) problems

We are trying to install liveCache 7.6.29 (SCM 5.0 SR2), during the database creation phase we are encountering the below error;
Execute Command : /sapdb/programs/bin/dbmcli -n ql1ap01.cardinalhealth.net -R /sapdb/QL1/db db_create QL1 CONTROL,******** ql1adm,
Start subprocess as user with uid: root
> Subprocess stops at 20070522205211
ERR
-24875,ERR_NEEDADMI: The operating system user is not a member of the database administrators group
-24994,ERR_RTE: Runtime environment error
20145,UNIX password ********
Please let me know if any of you have faced this issue and resolved the same.
Eagerly waiting for your reply, as this is a high priority for me.
Regards,
Thilaka

Hi Thilaka,
hm, why are you now askig the forum when you've direct email contact with me?
Anyway, this really should be handled over OSS...
Just fyi:
It seems that SAPINST is trying to issue the following command:
/sapdb/programs/bin/dbmcli -n ql1ap01.cardinalhealth.net -R /sapdb/QL1/db db_create QL1 CONTROL,******** ql1adm,
Can you try and see if you can issue it from the commandline on your machine (with the same user, i.e. probably root)? Please do not forget to add the password of the ql1adm, which is either not visible in the above command or forgotten (by SAPINST):
/sapdb/programs/bin/dbmcli -n ql1ap01.cardinalhealth.net -R /sapdb/QL1/db db_create QL1 CONTROL,******** ql1adm,<b><password></b>
After issueing this, please try to continue using SAPINST (and please update the OSS message accordingly).
Regards,
Roland

New database creation problem

While we are trying to create new database in test server it getting below error.
Error:

Hello,
There may be session accessing the model database, and that prevents the creation of the new database. This is by design; an exclusive lock is required on model database by SQL Server, since it needs to create the new database from a copy of the model database.
Run the sp_who2 to know which session has opening the model database.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How to get Database creation history in sql server

I have delete one database on my server, I want to know what was the MDF path for that Deleted database do we have any way to get that .?
Regards Vikas Pathak

Hello,
Once you delete the database SQL Server keeps information temporarily on the default trace about who deleted a database,
the name of the database (or object), at what time and the transaction number among the information provided. However, the default trace does not provide information about the location of the database files deleted.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

DATABASE CREATION PROBLEM

I followed the oracle press dba 8 book 2.
I create the password file with password a.
I also create the database with instance u16.
When i start with my database using svrmgrl
the said password does not work.
what may be the possible reason.
null

yes u are right, i check my initu16.ora
and it is shared, i will change it
then i will be able to send the right
reply.
but very very thnaks for so quick reply.
if u don't mind if u will tell me in which
category i will place my dba problems questions because the list is so completed that
oracle 8i value is not available
null

Database connecting problem using iPlanet Server

hi experts,
i am new begi to iPlanet server.
before that i was using JWS2.0.
simple servlet is working fine in iPlanet.
when coming to database connectivity, there is error shown as
"SQLException java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified "
below is my servlet
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.sql.*;
import java.util.*;
public class test1 extends HttpServlet
Connection dbCon;
Statement stat;
public void init(ServletConfig config) throws javax.servlet.ServletException
public void doGet (HttpServletRequest request,HttpServletResponse response) throws ServletException, IOException
ResultSet rs;
response.setContentType("text/html");
PrintWriter out = response.getWriter();
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
dbCon = DriverManager.getConnection("jdbc:odbc:collegeodbc","","");
stat = dbCon.createStatement();
rs = stat.executeQuery("select * from degrees");
rs.next();
out.println(rs.getString(1));
rs.close();
catch(ClassNotFoundException ce)
out.println("Class Not Found "+ce);
catch(SQLException se)
out.println("SQLException "+se);
public void destroy()
this same coding with void main() in system working fine.
still that servlet working fine with JWS2.0 also, but not in iPlanet.
any idea.
Plz help experts
thanks in adv.

hi,
yes u can avoid restarting the server after compiling a servlet
just follow the following instruction
go to \Netscape\Server4\https-admserv\config\contexts.properties
and uncomment the following lines
context.global.reloadInterval=1
context.global.isModifiedCheckAggressive=true
and do the same step for the following properties file in
\Netscape\Server4\https-"ur machine name"\config\contexts.properties
and u can avoid restarting the server after u compile a servlet

XML File Creation Problem in FTP Server

Hi.. Experts
My Internal Table is as follows
Types: Begin of ty_xmlfile,
         xmlline(60000)        type C,
       End of ty_xmlfile.
Data: it_xmlfile type standard table of ty_xmlfile,
        wa_xmlfile type ty_xmlfile.
When I download the file to my desktop using GUI_DOWNLOAD. It works fine
CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            BIN_FILESIZE = lv_size
            FILENAME     = lv_file_name
            FILETYPE     = 'ASC'
          TABLES
            DATA_TAB     = it_xmlfile
          EXCEPTIONS
            OTHERS       = 10.
        IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
In the debug mode when I download the internal table(IT_XMLFILE) into an excel file it doesn't open and it says tag is missinig(/basic_material_text) and also when I create the file in Application Server and transfer it to FTP Server it doesn't open there..and also in debug mode I find the length until DIMENSION AN.. for that row when I double click on that line in debug mode it shows all the text until </baisc_material_Text>
<basic_material_text>4.500 +.000/-.010 O.D. X 213.0" LG.(F)                      (A)ASTM A276 CONDITION "A" 317LTYPICAL MILL CERTS REQ'D.DIMENSION REFERENCE:(A) = ALLOWANCE IS INCLUDED FOR MACHINING(F) = THIS IS A FINISHED DIMENSION AN*
The above statement is incomplete when the file is open in FTP Server.
But when the file is created on to my desktop. It displays all the text....
<basic_material_text>4.500 +.000/-.010 O.D. X 213.0" LG.(F) (A)ASTM A276 CONDITION "A" 317LTYPICAL MILL CERTS REQ'D.DIMENSION REFERENCE:(A) = ALLOWANCE IS INCLUDED FOR MACHINING(F) = THIS IS A FINISHED DIMENSION AND WILL BE USED AS RECEIVED(T) = TO FINISH TO THIS DIMENSION FOR FORGING AND BILLET MATERIAL ONLYVENDOR TO SUPPLY THE FOLLOWING ENGINEERING/QUALITY ASSURANCE DATATYPICAL MILL TEST CERTIFICATES/CERTIFICATES MUST ACCOMPANY THE MATERIAL.* COPIES REQUIRED:(2)ALL CERTIFICATES MUST HAVE LIGHTNIN PART NO.CLEARLY MARKED ON THEM.* COPIES REQUIRED:(2)</basic_material_text> *
I could not understand why it takes only until DIMENSION AN
Any suggestions would be very helpful...
Thanks,
Chaitanya
-Points will be awarded for helpful answers.

Hi...
I think each XML Line will be of length 256. So I have to split the String into 256 of each Line.
XML DOM Processing in ABAP part I - Convert an ABAP table into XML file using SAP DOM Approach.
Hope it works out....I will try for that and Close the Post...
Thanks,
chaitanya K

Standby Database Creation problem

Hi,
I have setup Standby Database for our Primary DAtabae,
I am facing probel while applying redo logs, if somebody nows the solution, Please help me.
SQL> startup nomount PFILE='E:\oracle\admin\fno\pfile\init.ora';
ORACLE instance started.
Total System Global Area 730931140 bytes
Fixed Size 454596 bytes
Variable Size 285212672 bytes
Database Buffers 444596224 bytes
Redo Buffers 667648 bytes
SQL> ALTER DATABASE MOUNT STANDBY DATABASE;
Database altered.
SQL> RECOVER STANDBY DATABASE;
ORA-00279: change 7990686470 generated at 04/01/2006 15:53:57 needed
for threa
1
ORA-00289: suggestion : F:\ORACLE\ORADATA\FNO\ARCH\LOG_17032.ARC
ORA-00280: change 7990686470 for thread 1 is in sequence #7032
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
AUTO
ORA-00283: recovery session canceled due to errors
ORA-00600: internal error code, arguments: [3020], [8388681], [1],
[7032],
[137367], [16], [], []
ORA-10567: Redo is inconsistent with data block (file# 2, block# 73)
ORA-10564: tablespace UNDOTBS1
ORA-01110: data file 2: 'G:\ORACLE\ORADATA\FNO\UNDOTBS01.DBF'
ORA-10560: block type 'KTU SMU HEADER BLOCK'
ORA-01112: media recovery not started
Ramesh
pls mail me : [email protected]
+91 080 9341018616

Hi,
I have setup Standby Database for our Primary DAtabae,
I am facing probel while applying redo logs, if somebody nows the solution, Please help me.
SQL> startup nomount PFILE='E:\oracle\admin\fno\pfile\init.ora';
ORACLE instance started.
Total System Global Area 730931140 bytes
Fixed Size 454596 bytes
Variable Size 285212672 bytes
Database Buffers 444596224 bytes
Redo Buffers 667648 bytes
SQL> ALTER DATABASE MOUNT STANDBY DATABASE;
Database altered.
SQL> RECOVER STANDBY DATABASE;
ORA-00279: change 7990686470 generated at 04/01/2006 15:53:57 needed
for threa
1
ORA-00289: suggestion : F:\ORACLE\ORADATA\FNO\ARCH\LOG_17032.ARC
ORA-00280: change 7990686470 for thread 1 is in sequence #7032
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
AUTO
ORA-00283: recovery session canceled due to errors
ORA-00600: internal error code, arguments: [3020], [8388681], [1],
[7032],
[137367], [16], [], []
ORA-10567: Redo is inconsistent with data block (file# 2, block# 73)
ORA-10564: tablespace UNDOTBS1
ORA-01110: data file 2: 'G:\ORACLE\ORADATA\FNO\UNDOTBS01.DBF'
ORA-10560: block type 'KTU SMU HEADER BLOCK'
ORA-01112: media recovery not started
Ramesh
pls mail me : [email protected]
+91 080 9341018616

JDBC Problem with Netscape Enterprise Server 3.61

I have created a servlet->JDBC(Thin driver for Oracle 7.3) model to communicate the ORacle Database on an UNIX box by using Netscape Enterprise Server 3.61. I got the following problems and if anyone could help me. Many many thanks.
java.lang.IllegalAccessError: JdbcDriver at
WhitePageSearch.doGet(WhitePageSearch.java:75) * at
javax.servlet.http.HttpServlet.service(HttpServlet.java:252) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:330) at
sun.servlet.netscape.NSRunner.run(NSRunner.java:144) at
netscape.server.applet.ServerApplet.handleRequest(ServerApplet.java:69)
at netscape.server.applet.HttpApplet.handleRequest(HttpApplet.java:680)
By the way. This model works fine on the servletrunner on my NT machine and I guess there are some problem on the Nescape Server setting.

You need to install the Netscape Proxy plug-in.
You can find the plug-in at the BEA download site along with the instructions.
Once downloaded it took about 5 minutes to update a config file and have everything running.
Good Luck...
Daniel Astillero <[email protected]> wrote:
How can I configure Netscape Enterprise Server 3.5.1 to use WebLogic 5.1?

Problems updating the BAM database

Hi Guys,
I have an activity that runs for a long time and after executing for about 15-16 mins it causes the following exception.
Did somebody else also faced this problem ever? I have tried configuring all possible timeout parameters but all in vain.
Any help would be highly appreciated.
Thanks,
MK
EXCEPTION DETAILS
Problems updating the BAM database. Reason:Unable to connect to the database.
Caused by: A lock could not be obtained within the time requested
fuego.analyzer.UpdaterRuntimeException: Unable to connect to the database.
     at fuego.analyzer.UpdaterRuntimeException.cannotConnecToDatabase(UpdaterRuntimeException.java:80)
     at fuego.analyzer.UpdaterRunner.synchronizeMetadata(UpdaterRunner.java:494)
     at fuego.analyzer.UpdaterRunner.run(UpdaterRunner.java:273)
     at fuego.analyzer.UpdaterRunner.runUpdater(UpdaterRunner.java:176)
     at fuego.server.service.BAMRunnerService.runUpdater(BAMRunnerService.java:62)
     at fuego.server.execution.BAMUpdater.execute(BAMUpdater.java:33)
     at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:290)
     at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:465)
     at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:543)
     at fuego.transaction.TransactionAction.start(TransactionAction.java:216)
     at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:116)
     at fuego.server.execution.DefaultEngineExecution.executeAutomaticWork(DefaultEngineExecution.java:56)
     at fuego.server.execution.EngineExecution.executeAutomaticWork(EngineExecution.java:42)
     at fuego.server.execution.ToDoItem.executeAutomaticWork(ToDoItem.java:265)
     at fuego.server.execution.ToDoItem.run(ToDoItem.java:536)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:752)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:732)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:138)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:130)
     at fuego.fengine.ToDoQueueThread$PrincipalWrapper.processBatch(ToDoQueueThread.java:429)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:816)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:395)
Caused by: SQL Exception: A lock could not be obtained within the time requested
     at com.ibm.db2cs.m.j.generateCsSQLException(Unknown Source)
     at com.ibm.db2cs.m.b.wrapInSQLException(Unknown Source)
     at com.ibm.db2cs.m.b.handleException(Unknown Source)
     at com.ibm.db2cs.m.d.handleException(Unknown Source)
     at com.ibm.db2cs.m.t.handleException(Unknown Source)
     at com.ibm.db2cs.m.s.closeOnTransactionError(Unknown Source)
     at com.ibm.db2cs.m.s.movePosition(Unknown Source)
     at com.ibm.db2cs.m.s.next(Unknown Source)
     at fuego.jdbc.FaultTolerantResultSet.next(FaultTolerantResultSet.java:553)
     at fuego.analyzer.Updater.loadInstanceInfoValues(Updater.java:1039)
     at fuego.analyzer.Updater.loadInstanceInfoValues(Updater.java:988)
     at fuego.analyzer.Updater.loadInstanceInfo(Updater.java:982)
     at fuego.analyzer.Updater.synchronize(Updater.java:252)
     at fuego.analyzer.UpdaterRunner.synchronizeMetadata(UpdaterRunner.java:480)
     ... 20 more

Good morning justinmm357,
I would be more than happy to help delink the secondary email address from your My Best Buy™ account. Please send me a private message with the information below, by clicking on the blue button in my signature, and I will make sure that everything is up-to-date.
Name
Phone #
Mailing address
Email address (primary and secondary)
Thank you for reaching out to us on the forum and for being a My Best Buy™ member!
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

How to create a BAM database in enterprise version

Hi,
I need to configure and create a BAM database for my client in an AL Process Interaction installation. I tried to follow the documentation to create the BAM schema, but was not successful. It threw me a message telling me the Driver was not found. I did not see any documentation how to register a driver in the Process Administrator.
Is there any specific documentation for Configuring BAM. Also I was not able to run the BAM reports in the Process Designer. Has anybody done this before?? If so any documentation of how to do that will help.
Thanks
Pal

Hi Raul,
Thanks for the information. I guess in ALIP if you choose database subtype as SQL Server(Plumtree), then you dont have to install drivers.
Now I was able to create the BAM database. THen I installed the Fuegowarehouse service. When I start the servide I see the following error. But is there any config file where I can increase the maximum fetch size??
THanks
Pal
<F> 07/07/06 13:46:51] The number of entries retrieved is larger than the maximum fetch size.
fuego.directory.exception.FetchSizeExceededException: The number of entries retrieved is larger than the maximum fetch size.
     at fuego.directory.exception.FetchSizeExceededException.createWithList(FetchSizeExceededException.java:53)
     at fuego.directory.provider.plumtree.PlumtreeParticipantsAccessor$2.visit(PlumtreeParticipantsAccessor.java:168)
     at fuego.directory.provider.plumtree.PlumtreeParticipantsAccessor.visitAllPersons(PlumtreeParticipantsAccessor.java:662)
     at fuego.directory.provider.plumtree.PlumtreeParticipantsAccessor.fetchAllHumanParticipants(PlumtreeParticipantsAccessor.java:155)
     at fuego.directory.DirHumanParticipant.fetchAll(DirHumanParticipant.java:379)
     at fuego.directory.DirHumanParticipant.fetchAll(DirHumanParticipant.java:342)
     at fuego.analyzer.OrganizationMetadata.synchronizeParticipants(OrganizationMetadata.java:320)
     at fuego.analyzer.OrganizationMetadata.synchronize(OrganizationMetadata.java:113)
     at fuego.analyzer.UpdaterRunner.synchronizeMetadata(UpdaterRunner.java:455)
     at fuego.analyzer.UpdaterRunner.run(UpdaterRunner.java:270)
     at fuego.analyzer.UpdaterRunner.runUpdater(UpdaterRunner.java:173)
     at fuego.analyzer.service.BAMUpdaterRunnerService.run(BAMUpdaterRunnerService.java:97)
     at fuego.analyzer.service.WarehouseService$WarehouseServiceThread.runItem(WarehouseService.java:377)
     at fuego.analyzer.service.WarehouseService$WarehouseServiceThread.run(WarehouseService.java:310)
[<S> 07/07/06 13:46:51] Updater runtime exception.
Caused by: The number of entries retrieved is larger than the maximum fetch size.
fuego.analyzer.UpdaterRuntimeException: Updater runtime exception.
     at fuego.analyzer.UpdaterRuntimeException.wrapException(UpdaterRuntimeException.java:85)
     at fuego.analyzer.UpdaterRunner.run(UpdaterRunner.java:278)
     at fuego.analyzer.UpdaterRunner.runUpdater(UpdaterRunner.java:173)
     at fuego.analyzer.service.BAMUpdaterRunnerService.run(BAMUpdaterRunnerService.java:97)
     at fuego.analyzer.service.WarehouseService$WarehouseServiceThread.runItem(WarehouseService.java:377)
     at fuego.analyzer.service.WarehouseService$WarehouseServiceThread.run(WarehouseService.java:310)
Caused by: fuego.directory.exception.FetchSizeExceededException: The number of entries retrieved is larger than the maximum fetch size.
     at fuego.directory.exception.FetchSizeExceededException.createWithList(FetchSizeExceededException.java:53)
     at fuego.directory.provider.plumtree.PlumtreeParticipantsAccessor$2.visit(PlumtreeParticipantsAccessor.java:168)
     at fuego.directory.provider.plumtree.PlumtreeParticipantsAccessor.visitAllPersons(PlumtreeParticipantsAccessor.java:662)
     at fuego.directory.provider.plumtree.PlumtreeParticipantsAccessor.fetchAllHumanParticipants(PlumtreeParticipantsAccessor.java:155)
     at fuego.directory.DirHumanParticipant.fetchAll(DirHumanParticipant.java:379)
     at fuego.directory.DirHumanParticipant.fetchAll(DirHumanParticipant.java:342)
     at fuego.analyzer.OrganizationMetadata.synchronizeParticipants(OrganizationMetadata.java:320)
     at fuego.analyzer.OrganizationMetadata.synchronize(OrganizationMetadata.java:113)
     at fuego.analyzer.UpdaterRunner.synchronizeMetadata(UpdaterRunner.java:455)
     at fuego.analyzer.UpdaterRunner.run(UpdaterRunner.java:270)
     ... 4 more
[<F> 07/07/06 14:02:11] The number of entries retrieved is larger than the maximum fetch size.

BAM database creation problem in Enterprise Server

Similar Messages

Maybe you are looking for