BAM error - during start oracle BAM
Hi,
I am getting the below mentioned error while starting Oracle BAM, i have installed BAM 10g release (10.3), there were no problems in installation. Any help will be highly appreciated.
Rgds,
Jay
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
Starting "Oracle BAM Active Data Cache"...
System error 1069 has occurred.
The service did not start due to a logon failure.
Starting "Oracle BAM Event Engine"...
System error 1069 has occurred.
The service did not start due to a logon failure.
Starting "Oracle BAM Plan Monitor"...
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
Starting "Oracle BAM Report Cache"...
System error 1069 has occurred.
The service did not start due to a logon failure.
Press any key to continue . . .
Hi
Any particular reason , you haven't moved to BAM 11g ( 11.1.1.3.0).
This is the latest release for the product.
Regards
Payal
Similar Messages
-
Error in Starting Oracle BAM Active Data Cache
I am not able to start "Oracle BAM Active Data Cache" on my machine.
The other two components "Oracle BAM Event Engine" and "Oracle BAM Report Cache" are starting properly.
When I see the event log file of my Computer I could see the details as below:
Event Type: Error
Event Source: Oracle BAM Active Data Cache
Event Category: None
Event ID: 0
Date: 2/7/2007
Time: 3:51:25 PM
User: N/A
Computer: CHNANDA-WXP
Description:
ActiveDataCache: The Oracle BAM Active Data Cache service failed to start. Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in Startup(). ---> Oracle.DataAccess.Client.OracleException ORA-12541: TNS:no listener at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure)
at Oracle.DataAccess.Client.OracleConnection.Open()
at Oracle.DataAccess.Client.OracleConnection.Open()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetServerVersion()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.Startup(IDictionary oParameters)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
--- End of inner exception stack trace ---
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
at Oracle.BAM.ActiveDataCache.Kernel.Server.Server.Startup()
at Oracle.BAM.ActiveDataCache.Service.DataServer.Run()
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Could anyone pls help me?
Thanks and Regards,
Chinmaya Nandahi Chinmaya -can yoy tell us your companyname,project ? Your problem is very simple.BAM ADC is notable to reachoracle db.fromyour dos prompt- try tnsping <yrDB> [default is oraclebam or orcl ]/ Also see FAQ pages. there is a requirement on dos prompt setting, with <clientforBAM>as 1st parameter
-
Error starting Oracle BAM active data cache service
Hi
after installing BAM every thing working fine ,but if restart my system Oracle BAM active data cache service throwing following error
"The Oracle BAM Active Data Cache service on Local computer started and then stopped.Some services stop automatically if they have no work to do,for example the performance logs and alerts service"
Database is running fine
Following is the ADC log file error
2007-12-07 17:19:29,640 [2928] ERROR - ActiveDataCache The Oracle BAM Active Data Cache service failed to start. Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in Startup(). ---> System.DllNotFoundException: Unable to load DLL (OraOps10.dll).
at Oracle.DataAccess.Client.OpsTrace.GetRegTraceInfo(UInt32& TrcLevel, UInt32& StmtCacheSize)
at Oracle.DataAccess.Client.OraTrace.GetRegistryTraceInfo()
at Oracle.DataAccess.Client.OracleConnection..ctor(String connectionString)
at Oracle.DataAccess.Client.OracleConnection..ctor(String connectionString)
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleDataFactory.GetConnection()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetServerVersion()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.Startup(IDictionary oParameters)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
--- End of inner exception stack trace ---
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
at Oracle.BAM.ActiveDataCache.Kernel.Server.Server.Startup()
at Oracle.BAM.ActiveDataCache.Service.DataServer.Run()
2007-12-07 17:24:45,250 [1524] ERROR - ActiveDataCache Unable to load DLL (OraOps10.dll).
2007-12-07 17:24:45,265 [1524] WARN - ActiveDataCache Exception occurred in method Startup
Please help me in resolving this issue .Am getting this issue every time
Thanks
BSMake sure the path to the ODAC used by BAM (C:\OracleBAM\ClientForBAM\bin) is the first item in the system PATH
environment variable. Restart your computer after fixing this.
If that doesn't fix it, please check the Troubleshooting section in the BAM Install Guide.
Regards, Stephen -
Why the Oracle 8.1.7 PE coundnot have error during start the install stage On Win98?Someone tell me that need one patch for win98,but where can I download it?
ThanksWhy the Oracle 8.1.7 PE coundnot have error during start the install stage On Win98?Someone tell me that need one patch for win98,but where can I download it?
Thanks -
Hi.. I have HP-UX 11.00 server where oracle 8i is running.. from yesterday while starting database i am getting error. Please let me know the reason and way to sort out this issue.
++++++++++++++++Error While starting oracle++++++++++++++++++++++
startup
ORACLE instance started.
Total System Global Area 1253846036 bytes
Fixed Size 76820 bytes
Variable Size 622977024 bytes
Database Buffers 614400000 bytes
Redo Buffers 16392192 bytes
Database mounted.
ORA-01157: cannot identify/lock data file 3 - see DBWR trace file
ORA-01110: data file 3: '/ora8/oracle/oradata/pandb/rbs01.dbf'Due to the name,missing database file belongs to the rollback tablespace,
Database is down, was it shutdown CLEANLY (NORMAL or IMMEDIATE)? In this case do the following:
Remove the entries of all the rollback segments belonging to the
tablespace to which the lost datafile belonged from the
ROLLBACK_SEGMENTS parameter in the init.ora file, or simply comment
out the above parameter in init.ora.
Mount the database in restrict mode --- STARTUP RESTRICT MOUNT;
Offline drop the datafile;
Open the database
Drop all rollback segments belong the the tablespace
Drop and recreate tablespace
Recreate rollback segments
Otherwise you have to perform media recovery.
Werner -
O/S error in starting Oracle DBID Agent
Hi,
I'm installing fresh Oracle 8.1.7 software. However, after a while it gives me an error mesage "O/S error in starting Oracle<DBID>Agent. I open Services window. I try to start the service manually. It gives me "The service could not be start on local computer".
Could anyone help me on this. Thank you.
Rgds,
Hapizorr Rozi Alias^^ the best choice right now would be oracle 10.2 as 9.2 will be de-supported by the end of june 2007...some sap products (using the 46D_EXT kernel..) will support oracle 10.2.
-> see sapnote n° 940.794
GreetZ, AH -
Error during start of process in Inegration Process
Hi,
My scenario is file to integration process and back.
Message is not entering my integration process. In sxmb_moni it shows a green falg at the queue and when you click on 'PE', we are taken to the inbound queue with 'SYSFAIL'.
The error description at the trace is 'Error during start of process'.
There are no errors in sxi_cache for the particular integration process. The return code is '0'. I have tried re-activation too and tested again. But to no avail.
There are no entries in swwl, since the message has not even entered integration process.
Kindly help me to correct the error.
Thanks,
JohnHi,
Yes the the 'Start Process' is checked.
Steps in BPM.
Receive step, transformation step to a multiline element, a block for sending each line in the multiline, a container operation for appending (also inside the block) and finally another transforamtion and send step.
But since the message has not even entered the send step, it is not of much use to know all steps
Thanks,
John -
Error during start instance phase
Dear all,
I am getting an error during start instance phase of netweaver 7.0 installing.I am using windows server 2008 and mssql.
The error is "instance ecd\dvebmgs00 reached state shutdown after having state starting.giving up".I searched a lot but still error
is not solved.so please tell me how to solve this error.dev_disp:
trc file: "dev_disp", trc level: 1, release: "701"
sysno 00
sid ECD
systemid 562 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 32
intno 20020600
make: multithreaded, Unicode, 64 bit, optimized
pid 3228
Mon Mar 17 11:04:13 2014
kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
length of sys_adm_ext is 576 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3228) [dpxxdisp.c 1286]
shared lib "dw_xml.dll" version 32 successfully loaded
shared lib "dw_xtc.dll" version 32 successfully loaded
shared lib "dw_stl.dll" version 32 successfully loaded
shared lib "dw_gui.dll" version 32 successfully loaded
shared lib "dw_mdm.dll" version 32 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Mar 17 11:04:19 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5529]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SAPdev01_ECD_00 <
DpShMCreate: sizeof(wp_adm) 29792 (1752)
DpShMCreate: sizeof(tm_adm) 5912704 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000008DC0050, size: 6614144)
DpShMCreate: allocated sys_adm at 0000000008DC0050
DpShMCreate: allocated wp_adm at 0000000008DC2270
DpShMCreate: allocated tm_adm_list at 0000000008DC96D0
DpShMCreate: allocated tm_adm at 0000000008DC9730
DpShMCreate: allocated wp_ca_adm at 000000000936CFB0
DpShMCreate: allocated appc_ca_adm at 0000000009372DB0
DpShMCreate: allocated comm_adm at 0000000009374CF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 00000000093FB980
DpShMCreate: allocated gw_adm at 00000000093FBA00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 00000000093FBA30
DpShMCreate: allocated wall_adm at 00000000093FBA40
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1018 blocks reserved for free list.
ES initialized.
Mon Mar 17 11:04:20 2014
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1681]
***LOG Q0K=> DpMsAttach, mscon ( SAPdev01) [dpxxdisp.c 12483]
Mon Mar 17 11:04:21 2014
DpStartStopMsg: send start message (myname is >SAPdev01_ECD_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Mon Mar 17 11:04:22 2014
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7010, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1048]
DpMsgAdmin: Set patchno for this platform to 32
Release check o.K.
Mon Mar 17 11:05:01 2014
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:11 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Mar 17 05:35:11 2014
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3440 Ended no 1 0 0
1 DIA 3448 Ended no 1 0 0
2 DIA 3456 Ended no 1 0 0
3 DIA 3468 Ended no 1 0 0
4 DIA 3476 Ended no 1 0 0
5 DIA 3484 Ended no 1 0 0
6 DIA 3492 Ended no 1 0 0
7 DIA 3500 Ended no 1 0 0
8 DIA 3508 Ended no 1 0 0
9 DIA 3516 Ended no 1 0 0
10 UPD 3524 Ended no 1 0 0
11 ENQ 3532 Ended no 1 0 0
12 BTC 3540 Ended no 1 0 0
13 BTC 3548 Ended no 1 0 0
14 BTC 3556 Ended no 1 0 0
15 SPO 3564 Ended no 1 0 0
16 UP2 3572 Ended no 1 0 0
Dispatcher Queue Statistics Mon Mar 17 05:35:11 2014
===========================
+------+--------+--------+--------+--------+--------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP | 0 | 2 | 2000 | 5 | 5 |
+------+--------+--------+--------+--------+--------+
| DIA | 5 | 5 | 2000 | 5 | 0 |
+------+--------+--------+--------+--------+--------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 4 ( 50%), shm 4 ( 50%)
since last update total 8, udp 4 ( 50%), shm 4 ( 50%)
Dump of tm_adm structure: Mon Mar 17 05:35:11 2014
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Mar 17 05:35:11 2014
=============================
Slots: 300, Used: 1, Max: 0
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:16 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SAPdev01_ECD_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (3424) (SOFT_KILL)
Stop icman
killing process (3432) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:3424 HANDLE:776)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:17 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3424 HANDLE:776)
wait for end of icman
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:18 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:19 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:20 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:21 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:22 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:23 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:24 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:25 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:26 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:27 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:28 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3432 HANDLE:784)
DpStartStopMsg: send stop message (myname is >SAPdev01_ECD_00 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=SAPdev01_ECD_00 , sapsysnr= 0, hostname=SAPdev01
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Mar 17 11:05:29 2014
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12829]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 772 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 772 (pos=2)
SiSelNRemove: removed sock 772
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 772
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3228) [dpxxdisp.c 11045]
Good Bye .....
dev_ms:
trc file: "dev_ms", trc level: 1, release: "701"
[Thr 2596] Sun Mar 16 17:31:39 2014
[Thr 2596] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 562 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 11
intno 20020600
make: multithreaded, Unicode, 64 bit, optimized
pid 4004
[Thr 2596] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 4004) [msxxserv.c 1853]
[Thr 2596] load acl file = E:\usr\sap\ECD\SYS\global\ms_acl_info.DAT
[Thr 2596] MsGetOwnIpAddr: my host addresses are :
[Thr 2596] 1 : [192.168.42.205] SAPdev01 (HOSTNAME)
[Thr 2596] 2 : [127.0.0.1] SAPdev01 (LOCALHOST)
[Thr 2596] 3 : [169.254.221.8] SAPdev01 (NILIST)
[Thr 2596] MsHttpInit: full qualified hostname = SAPdev01
[Thr 2596] HTTP logging is switch off
[Thr 2596] set HTTP state to LISTEN
[Thr 2596] ms/icf_info_server : deleted
[Thr 2596] *** I listen to port sapmsECD (3600) ***
[Thr 2596] *** I listen to internal port 3900 (3900) ***
[Thr 2596] *** HTTP port 8100 state LISTEN ***
[Thr 2596] CUSTOMER KEY: >J0169343196<
[Thr 2596] build version=701.2008.03.06
[Thr 2596] Sun Mar 16 17:32:52 2014
[Thr 2596] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from SAPdev01_ECD_00 [msxxserv.c 4711]
[Thr 3648] Sun Mar 16 17:39:27 2014
[Thr 3648] MsSExit: received SIGINT (2)
[Thr 3648] ***LOG Q02=> MsSHalt, MSStop (Msg Server 4004) [msxxserv.c 6021]
dev_w0:
trc file: "dev_w0", trc level: 1, release: "701"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
B
B Sun Mar 16 17:31:45 2014
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\ECD\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'E:\usr\sap\ECD\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\ECD\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.31)
B New connection 0 created
M sysno 00
M sid ECD
M systemid 562 (PC with Windows NT)
M relno 7010
M patchlevel 0
M patchno 32
M intno 20020600
M make: multithreaded, Unicode, 64 bit, optimized
M pid 3256
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3256) [dpxxdisp.c 1348]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 29792 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000AA00050, size: 6614144)
M DpShMCreate: allocated sys_adm at 000000000AA00050
M DpShMCreate: allocated wp_adm at 000000000AA02270
M DpShMCreate: allocated tm_adm_list at 000000000AA096D0
M DpShMCreate: allocated tm_adm at 000000000AA09730
M DpShMCreate: allocated wp_ca_adm at 000000000AFACFB0
M DpShMCreate: allocated appc_ca_adm at 000000000AFB2DB0
M DpShMCreate: allocated comm_adm at 000000000AFB4CF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000B03B980
M DpShMCreate: allocated gw_adm at 000000000B03BA00
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000B03BA30
M DpShMCreate: allocated wall_adm at 000000000B03BA40
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host SAPdev01
M calling db_connect ...
C Callback functions for dynamic profile parameter registered
C Thread ID:2876
C Thank You for using the SLODBC-interface
C Using dynamic link library 'E:\usr\sap\ECD\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 31
C patchcomment Handle long parameters as LOBs (1296540)
C Local connection used on SAPDEV01 to named instance: lpc:SAPDEV01\ECD
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (0) [IM006] [Microsoft][SQL Server Native Client 10.0]Packet size change not supported by server, default used
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
C Connection 0 failed using Driver={SQL Server Native Client 10.0};Server=SAPDEV01\ECD;AutoTranslate=no;Trusted_Connection=yes;WSID=SAPDEV01;APP=R3D00 comm rd ODBC;Database=ECD;
C
B ***LOG BY2=> sql error 18456 performing CON [dbsh#2 @ 1208] [dbsh 1208 ]
B ***LOG BY0=> [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'. [dbsh#2 @ 1208] [dbsh 1208 ]
B ***LOG BY2=> sql error 18456 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'. [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10563]
M
M Info for wp 0
M
M pid = 3256
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SAPdev01_ECD_00 on host SAPdev01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Sun Mar 16 17:31:45 2014
M * RELEASE 701
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10783
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3256) [dpnttool.c 334] -
Error during start of process of type
Hi All,
One of my BPM scenario was strucked every weekend in the queue (SMQ2) and say the error called " Error during start of process of type WS91000041"
I observed the Queue messages, due to the error from database system for particular record,
In my BPM there is Exception Branch in the block step in case of Database connection error, Why it was strucked in the queue in case of error in the Database?
Why it doesn't the goes to exception branch?
Kindly suggest me how i can approach here.
Thank you very much.
Regards,
SateeshHello All,
Again,
Could you please suggest me above my problem.I am looking forward from you.
Thank you.
Kindest Regards,
Sateesh
Edited by: sateesh kumar .N on Oct 11, 2011 10:39 AM -
Hi,
I would appreciate if anyone can help me in solving this issue.
I`m getting an error while starting the ADC Service.
Service cannot be started. Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in Startup(). ---> System.Exception: DPAPI was unable to decrypt data. CryptUnprotectData failed. Error -2146893813: Key not valid for use in specified state.
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(Byte[] cipherTextBytes, Byte[] entropyBytes, String& description)
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(String cipherText, String entropy, String& description)
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(String cipherText)
at
It was working ,suddenly it stopped working and giving this error. Dont know what`s wrong.Need help.
ThanksHi Nitin,
Was the password of the account that the ADC service runs as changed?
If so, see "Working with Post-Install Password Changes and Password Expiration Policies" in the BAM Install Guide.
Regards, Stephen -
BAM Error - during the creation of BAM Activity and View in EXCEL
I'm getting an error "The Cube could not be created successfully. Please edit the view and validate the inputs" during the creation of BAM Activity and VIEW in MS Excel for BAM
Error Details:
Error Description:
The following system error occurred: Invalid class string .
Error Source:
Microsoft OLE DB Provider for Analysis Services 2008.
Please help me in resolving the issue. Thanks in Advance!!Hi Ramesh,
Below link has the information related to all the prerequisites for using BAM Add-In for Excel.
Kindly ensure that you have all the files in place before creating BAM Activity and View.
http://msdn.microsoft.com/en-us/library/aa560476.aspx
Rachit
Please mark it as Answer if this answers your question -
Error when starting oracle instance
Hi,
today, after a lot of trouble, I was able to install oracle 10.2.0.1 on redhat as 4 upd 2 x86_64.
This link helped me so much http://www.puschitz.com/InstallingOracle10g.shtml help.
I met a link error because of binutils version. After I installed binutils-2.15.92.0.2-15.0.0.0.2.x86_64.rpm (my version was binutils-2.15.92.0.2-15.0.0.0x86_64.rpm), I did retry and the install problem was solved.
Then during dbca I met another error (ORA-12547: TNS:lost contact) because of libaio. I had 32 bit version instead of 64 bit. After the package update dbca run successfully.
I'm facing the following problem during instance startup:
"Thu Apr 19 17:40:17 2007
Errors in file /oracle/admin/UAT/udump/uat_ora_2697.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15"
I told you those things about installation phase because maybe this error is related to the install (maybe something went wrong without I know it).
Error in trace is:
/oracle/admin/UAT/udump/uat_ora_2697.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning and Data Mining options
ORACLE_HOME = /oracle/10gR2
System name: Linux
Node name: uatlxora1.bw-ita.it
Release: 2.6.9-22.EL
Version: #1 Mon Sep 19 17:49:49 EDT 2005
Machine: x86_64
Instance name: UAT
Redo thread mounted by this instance: 1
Oracle process number: 15
Unix process pid: 2697, image: [email protected] (TNS V1-V3)
*** SERVICE NAME:(SYS$USERS) 2007-04-19 17:40:17.788
*** SESSION ID:(104.3) 2007-04-19 17:40:17.788
Error in executing triggers on database startup
*** 2007-04-19 17:40:17.789
ksedmp: internal or fatal error
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15
The strange thing is that I haven't installed OLAP option. I installed enterprise edition + partioning.
Any help is much appreciated. Is my installation ok?
Thanks in advance,
TarekHi guido,
i have the same problem with OLAP, when i start an instance i have got error messages in alert_log, and a lot of objekts a invalid, i can not recompile the objekt, oracle will it automatic, and ends with this errors:
Line # = 0 Column # = 0 Error Text = ORA-12663: Services required by client not available on the server
Line # = 0 Column # = 0 Error Text = ORA-36961: Oracle OLAP is not available.
Line # = 0 Column # = 0 Error Text = ORA-06512: at line 4
Line # = 0 Column # = 0 Error Text = ORA-06512: at "SYS.OLAPIMPL_T", line 17
Line # = 0 Column # = 0 Error Text = ORA-06512: at "SYS.OLAPIMPL_T", line 23
I have oracle installed on debian 3.1
Have you any suggestions to solve this problem?
Thanks
ANDREAS
-GERMANY- -
Hi
I have grid installed on linux and was working properly. I have changed the password for sysman and gave some additional privilages to sys account. Once i saved the changes. I am not able to accees the Grid control in web browser and getting the following Error
"503 Service Unavailable
Servlet error: Service is not initialized correctly. Verify that the repository connection information provided is correct."
I stopped all the services and restarted the machine and when trying to start the Grid i am recieving the follwoing error
"Oracle Management Server is not functioning because of the following reason:
Connection to the repository failed. Verify that the repository connection information provided is correct."
Please help me on this it is very urgentWhen i start the OMS it is giving the follwoing Error.
[oracle@tools ~]$ $ORACLE_HOME/bin/emctl start oms
Oracle Enterprise Manager 10g Release 3 Grid Control
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
opmnctl: opmn started
Starting HTTP Server ...
Starting Oracle Management Server ...
Checking Oracle Management Server Status ...
Oracle Management Server is not functioning because of the following reason:
Connection to the repository failed. Verify that the repository connection information provided is correct.
The EMOMS.log file is
2008-03-03 09:22:19,286 [Orion Launcher] ERROR jdbc.ConnectionWrapper _applySessionParams.2044 - SQLException message: ORA-06553: PLS-213: package STANDARD not accessible
java.sql.SQLException: ORA-06553: PLS-213: package STANDARD not accessible
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:304)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:271)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:625)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1162)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2932)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:2973)
at oracle.sysman.util.jdbc.ConnectionWrapper._applySessionParams(ConnectionWrapper.java:2035)
at oracle.sysman.util.jdbc.ConnectionWrapper.<init>(ConnectionWrapper.java:192)
at oracle.sysman.emSDK.svc.conn.FGAConnection.<init>(FGAConnection.java:120)
at oracle.sysman.emSDK.svc.conn.FGAConnection.<init>(FGAConnection.java:103)
at oracle.sysman.emSDK.svc.conn.FGAConnection.<init>(FGAConnection.java:160)
at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:264)
at oracle.sysman.emSDK.svc.conn.ConnectionService.getPrivateConnection(ConnectionService.java:1063)
at oracle.sysman.emSDK.svc.conn.ConnectionService.getRepositoryVersionAndMode(ConnectionService.java:698)
at oracle.sysman.emSDK.svc.conn.ConnectionService.verifyRepositoryEx(ConnectionService.java:778)
at oracle.sysman.emSDK.svc.conn.ConnectionService.verifyRepository(ConnectionService.java:835)
at oracle.sysman.eml.app.ContextInitializer.contextInitialized(ContextInitializer.java:264)
at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1009)
at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:549)
at com.evermind.server.Application.getHttpApplication(Application.java:890)
at com.evermind.server.http.HttpServer.getHttpApplication(HttpServer.java:707)
at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:625)
at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:278)
at com.evermind.server.http.HttpServer.setSites(HttpServer.java:278)
at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:179)
at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2394)
at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1551)
at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:92)
at java.lang.Thread.run(Thread.java:534)
2008-03-03 09:22:19,428 [Orion Launcher] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = ORA-06553: PLS-213: package STANDARD not accessible
2008-03-03 09:22:19,513 [ReadProxyFromRep] ERROR rep.proxy getPrivateConnection.89 - Could not get Private Connection from Connection Service. Blocking until connection service becomes valid and then again attempts to get a private connection
2008-03-03 09:22:19,624 [ReadProxyFromRep] ERROR jdbc.ConnectionWrapper _applySessionParams.2044 - SQLException message: ORA-06553: PLS-213: package STANDARD not accessible
The EMOMS.trc File is
"2008-03-03 09:22:19,286 [Orion Launcher] ERROR jdbc.ConnectionWrapper _applySessionParams.2044 - SQLException message: ORA-06553: PLS-213: package STANDARD not accessible
java.sql.SQLException: ORA-06553: PLS-213: package STANDARD not accessible
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:304)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:271)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:625)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1162)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2932)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:2973)
at oracle.sysman.util.jdbc.ConnectionWrapper._applySessionParams(ConnectionWrapper.java:2035)
at oracle.sysman.util.jdbc.ConnectionWrapper.<init>(ConnectionWrapper.java:192)
at oracle.sysman.emSDK.svc.conn.FGAConnection.<init>(FGAConnection.java:120)
at oracle.sysman.emSDK.svc.conn.FGAConnection.<init>(FGAConnection.java:103)
at oracle.sysman.emSDK.svc.conn.FGAConnection.<init>(FGAConnection.java:160)
at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:264)
at oracle.sysman.emSDK.svc.conn.ConnectionService.getPrivateConnection(ConnectionService.java:1063)
at oracle.sysman.emSDK.svc.conn.ConnectionService.getRepositoryVersionAndMode(ConnectionService.java:698)
at oracle.sysman.emSDK.svc.conn.ConnectionService.verifyRepositoryEx(ConnectionService.java:778)
at oracle.sysman.emSDK.svc.conn.ConnectionService.verifyRepository(ConnectionService.java:835)
at oracle.sysman.eml.app.ContextInitializer.contextInitialized(ContextInitializer.java:264)
at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1009)
at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:549)
at com.evermind.server.Application.getHttpApplication(Application.java:890)
at com.evermind.server.http.HttpServer.getHttpApplication(HttpServer.java:707)
at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:625)
at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:278)
at com.evermind.server.http.HttpServer.setSites(HttpServer.java:278)
at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:179)
at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2394)
at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1551)
at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:92)
at java.lang.Thread.run(Thread.java:534)
2008-03-03 09:22:19,428 [Orion Launcher] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = ORA-06553: PLS-213: package STANDARD not accessible
2008-03-03 09:22:19,513 [ReadProxyFromRep] ERROR rep.proxy getPrivateConnection.89 - Could not get Private Connection from Connection Service. Blocking until connection service becomes valid and then again attempts to get a private connection
2008-03-03 09:22:19,624 [ReadProxyFromRep] ERROR jdbc.ConnectionWrapper _applySessionParams.2044 - SQLException message: ORA-06553: PLS-213: package STANDARD not accessible
java.sql.SQLException: ORA-06553: PLS-213: package STANDARD not accessible
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:304)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:271)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:625)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1162)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2932)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:2973)
at oracle.sysman.util.jdbc.ConnectionWrapper._applySessionParams(ConnectionWrapper.java:2035)
at oracle.sysman.util.jdbc.ConnectionWrapper.<init>(ConnectionWrapper.java:192)
at oracle.sysman.emSDK.svc.conn.FGAConnection.<init>(FGAConnection.java:120)
at oracle.sysman.emSDK.svc.conn.FGAConnection.<init>(FGAConnection.java:103)
at oracle.sysman.emSDK.svc.conn.FGAConnection.<init>(FGAConnection.java:160)
at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:264)
at oracle.sysman.emSDK.svc.conn.ConnectionService.getPrivateConnection(ConnectionService.java:1063)
at oracle.sysman.emSDK.svc.conn.ConnectionService.getRepositoryVersionAndMode(ConnectionService.java:698)
at oracle.sysman.emSDK.svc.conn.ConnectionService.verifyRepositoryEx(ConnectionService.java:778)
at oracle.sysman.emSDK.svc.conn.ConnectionService.verifyRepository(ConnectionService.java:835)
at oracle.sysman.emSDK.svc.conn.ConnectionService.blockUntilValid(ConnectionService.java:860)
at oracle.sysman.eml.admin.rep.proxy.ReadProxyFromRep.getPrivateConnection(ReadProxyFromRep.java:90)
at oracle.sysman.eml.admin.rep.proxy.ReadProxyFromRep.readParams(ReadProxyFromRep.java:132)
at oracle.sysman.eml.admin.rep.proxy.ReadProxyFromRep.run(ReadProxyFromRep.java:279)
2008-03-03 09:22:19,644 [ReadProxyFromRep] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = ORA-06553: PLS-213: package STANDARD not accessible
Please help me -
OCS on windows error in starting oracle
Dear All I have Installed collab. Suite 904 single-box to Windows 2000, installation was ok, every thing was working. After restart when I try to start oracle by issuing "/as sysdba" it gives me error of insufficient privileges. I am not sure what went wrong, I am logged on by local admin (the same account I used to install, yet my machine is the member of a domain) and it is in the ora_dba group.
Can any body point me what to do to start the database.
Thanksgo to $ORACLE_HOME/dbs. In there you should find a file called init.ora. Make a copy of it and call it init<SID>.ora. In your case that would be initSecondDB.ora. Once you have done that, start up the instance and it should come up.
Salman -
During start up of Adobe Premiere Pro CS6, I get the following error message. "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again." This does not occur on After Effects, and the program runs successfully. Premiere Pro will not open, and in the start up window the last thing the status line states before the error message occurs is: "Loading ImporterQuikTime.prm"
I have added an NVidia GPU card to my system and have installed the latest video drivers from the NVidida website (GeForce 310.70). This did not help. I have QuikTime on my computer, but am not sure if it needs to be in a certain file location.
I have also gone in to BIOS after installing the GPU and disabled internal graphics, but that did not help either. Not sure what to do next. Any suggestions?
Thank you,
RhoadmanThank you everyone for the replies. Although I don't have a laptop, the following seems to work.
Solution 1
On Windows 7, right-click the shortcut to Adobe Premiere Pro, and choose Run as Administrator.
Using this method, Premiere Pro opened successfully. Using the shortcut directly, the error persists. It looks like we will just have to open the program using this method.
Many thanks for the replies.
Maybe you are looking for
-
Moving files doesn't update Flash Skins in DW CS 4?
Hello, on a page I've got a flash movie (.swf with skin (via importing/converting a qt in adobe media encoder, then importing video into flash, adding a skin, them exporting to site folder an opening in DW CS4). it works fine in the browsers. now whe
-
MacBook - problems with iPhoto slideshow music
Just got my brand new MacBook today and imported everything from old PowerBook. However now that I am trying to play a slideshow in iPhoto, the music to it will not play. Yet it will play in iTunes app itself, but not within the slideshow in iPhoto?
-
Import database using 10g imp utility - need your advice.
I created export.dmp file on the database server that contains all schema objects (tables, indexes, views, etc.) and successfully moved it from the server to my laptop using telnet and ftp. Now I want to use this file to import ALL objects into my lo
-
IPhone 5 shuts down after having 36% battery left.
Okay so I have an iPhone 5 running iOS 6.1 I haven't had this problem at all until updating to 6.1 Everytime my phone hits 36% battery, it shuts down. It is not jailbroken either. When I try turning it on, the charging idicator turns on and that's wh
-
Time Machine could not complete the backup "Time Capsule". Unable to access disk image backup "/ Volumes / Time Capsule / iMac.sparsebundle" (error 112). How can I fix it?