BAM Portal Aggregations Outside server - OWC Error

Hi
Is there a list of things which needs to be done in order to successfully view the BAM SSAS Aggregations in BAM Portal outside the server ?
At the moment , the BAM portal throws the below Error as Office Web Components Error.
Failed to get data. If available, errors returned from the provider are listed below.
* The following system error occurred: The requested name is valid, but no data of the requested type was found. .
Thanks for any guidance.
http://biztalkguide.blogspot.com/ Please mark as answer if this solved the issue.Thanks

Hi Thanks
I had already tried the HTTP access to Analysis services and also verified the BAM permissions as well.
Aggregations works fine locally through BAM portal which means HTTP access to Analysis services is already in place .
Firewall turned off in the server ,hence no need to open the ports.
Note : both BAM Portal (IIS) & Analysis services are in the same server and running under a local account.
The problem however is accessing the BAM portal remotely from another server using the local account credentials.
The issue is more specific to the error message below
Failed to get data. If available, errors returned from the provider are listed below.
* The following system error occurred: The requested name is valid, but no data of the requested type was found. .
http://biztalkguide.blogspot.com/ Please mark as answer if this solved the issue.Thanks

Similar Messages

Bam portal Access is denied.

hi , when im access Bam portal i got the below error, Please any one put inputs?
Server Error in '/BAM' Application.
Access is denied.
Description: An error occurred while accessing the resources required to serve this request. The server may not be configured for access to the requested URL.
Error message 401.2.: Unauthorized: Logon failed due to server configuration. Verify that you have permission to view this directory or page based on the credentials you supplied and the authentication methods enabled on the Web server.
Contact the Web server's administrator for additional assistance.

This link explains the error codes -http://support.microsoft.com/?id=318380.
Confirm the BAM Application Pool user is a member of the IIS_WPG group. Here are the steps just in case:
1. Open the BAM virtual directory properties and note the Application Pool specified.
2. Open the BAM AppPool properties and go to the Identity tab. This will tell you the account executing the
w3wp.exe process.
3. Confirm this user is a member of the IIS_WPG group.
You can also try AuthDiag (http://www.microsoft.com/downloads/details.aspx?FamilyId=E90FE777-4A21-4066-BD22-B931F7572E9A&displaylang=en).
Also refer: Biztalk
BAM Portal Issues
Rachit
Please mark as answer or vote as helpful if my reply does

BAM Portal configuration error in BizTalk Server 2013 R2

I have tried 2 attempts to build out a BizTalk Server 2013 R2, I have followed the MSDN Install instructions, and I keep on getting an error when configuring BAM Portal. I have the logfile available, I need to know what the experts need to see in order to
give me an answer. Understand that we have been using BizTalk Server 2013 for the last two years, and a new developer wants the R2 version and BAM Portal configured. As an administrator I have fought this to no end, and now I have enough evidence to go back
to our project manager and explain why you do not install every feature on a server. Prove me wrong EXPERTS!

" I need to know what the experts need to see in order to give me an answer."
Experts needs:
1) Little background of the issue you are facing.
2) The log file generated.
3) The configuration of your server.
"now I have enough evidence to go back to our project manager and explain why you do not install every
feature on a server."
Disagree, It is indeed possible to install all the components and feature on a server. Somewhere someone would have installed BizTalk 2013 R2 and all its components in exactly same server configuration successfully in which you are trying to achieve, the
only difference could be a missing Package, Patch, Cumulative Update, Service or any configuration miss at your end.
Pls read more about BizTalk 2013R2 installation on Installation Overview for BizTalk Server 2013 and 2013 R2.
Review the Hardware
and Software Requirements for BizTalk Server 2013 and 2013 R2.
Understand the Considerations
Before Installing BizTalk Server 2013 and 2013 R2.
Prepare Your Computer for Installation.
Specifically for BAM Portal. Microsoft has documented Prerequisites, Permissions and Considerations.
Planning for the BAM Portal
I would advice you to refer this post by Sandro . BAM Portal configuration error
Rachit

BAM Portal is only displaying one day of aggregations

Has anyone else seen this behaviour and better still how did you resolve
it? See
http://connectedpawns.wordpress.com/2014/09/25/bam-is-displaying-only-one-day-of-aggregations/
We implemented a BAM solution using BizTalk Server 2013 and Standard SQL
server 2012 that contained an aggregation. We set up a scheduled aggregation as
described
here.
In production if we open the BAM portal and expand the Aggregations we always
only see the most recent days data.
In contrast the UAT environment if we look at the aggregations in the BAM portal
we see several months of data.
Currently can not find any difference between the database objects
between UAT and Production i.e. the BAM_AN_All_GCTM and the SQL agent job that
runs the package regularly. We have confirmed that all the data is present in
the BAMPrimaryImport tables but the portal is not displaying all the data.
Please let me know why we a seeing this difference of behaviour between our
UAT and Production environment.

Have you tried the BM commands -activitywindow across the two systems to verify if the aggregation durations are the same across the systems?
Refer http://msdn.microsoft.com/en-us/library/aa560205.aspx for details on how to Get/Set the time windows on Activity/RTA Aggregations.
Regards.

Bam portal showing http 404 error

Hi,
When i open BAM portal in our QA server it works fine, i can see all views and activities,
But, when i open in my local system it gives "HTTP 404 error" - "The resource you are looking for has been removed, had its name changed, or is temporarily unavailable."
There is no error in event log,
Anonymous Authentication , ASP.Net Imersonation and Windows Authentication are enabled
Here is screenshot of .net authorization rules specified.
The same is working fine in Development server.
I think it is some IIS issue.
Thanks,
Sarvasetty.

"HTTP 404 error" as the error says is resource issue not an authorization issue. I think you're missing some files required for BAM portal. Rerun the BizTalk configuration tool, remove the BAM portal and rerun it again to install the BAM portal
from scratch again.
Also ensure you have the relevant .NET framework version is set in Application Pool which is used by your BAM portal
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How to Install BAM Alerts in multi environment in 2013 R2? How to point to a single BAM Portal(Default WebSite) configured on BTS APP server1 from BTS App Server 2 and BTS App Server 3 ?

Please guide me on BAM install in multi environment for 2013 R2. Any blog which can show, how to configure multiple BTS servers to point to a single BAM portal created on the first server.
The BAM portal is configured on the Default Website on the first server.
How Could I Point to the same portal while configuring other 2 BTS servers?
What are the authentication mechanisms, I have to use at virtual directories and root level?
Racha Rams

The document for installing BAM for B2K13 in a multi-computer environment is available as part of the BizTalk documentation available for download from
http://www.microsoft.com/en-in/download/details.aspx?id=35552
You will most likely also need to refer to the TechNet Blog
http://blogs.technet.com/b/meamcs/archive/2013/07/26/fixed-biztalk-2013-bam-tools-configuration-problem.aspx which mentions having to setup SQL Mail feature in SQL Server 2012 and post that configuring both the features BAM Tools and BAM Alerts together.
Regards.

BAM Portal

hi
i installed biztalk server 2010.
when i want to config BAM Portal meet this error:
Failed to validate BAM Portal Web site (BAMPortal)
Additional information:
   The BAM Portal website Default Web Site is not valid.
    (Microsoft.Biztalk.Bam.CfgExtHelper.PortalHelper)
    Exception from HRESULT : 0x80005008(System.DirectoryServives)
I had already installed 2009
please help me.

Hi,
Did you install BizTalk according to documentation? You can find install guide
here and some additional information through this
post and serie of
posts by Sandro. For error see
post by Saravana.
HTH
Regards,
Steef-Jan Wiggers
MVP & MCTS BizTalk Server 2010
http://soa-thoughts.blogspot.com/
If this answers your question please mark it accordingly
BizTalk

Webdispatcher SSL load balance server mismatch errors

We are setting up a webdispatcher to access an Enterprise Portal with multiple instances. Currently it is working but we are having to overide host mismatches. in webdispacther log we see
[Thr 4856] Mon Mar 07 11:38:02 2011
[Thr 4856] MatchTargetName("aaa.mycompany.com", "CN=bbb.mycompany.com, OU=xxx, O=ooo, L=ccc, SP=sss, C=US") FAILS
[Thr 4856] SSL NI-sock: local=##.21.13.137:50746 peer=##.21.13.131:51001
[Thr 4856] <<- ERROR: SapSSLSessionStart(sssl_hdl=0000000008565100)==SSSLERR_SERVER_CERT_MISMATCH
The Portal instances are on
aaa.mycompany.com
bbb.mycompany.com
Currently have a CA approved certificate for each server installed in the portal. Dispatcher on aaa uses aaa cert, dispatcher on bbb uses bbb cert.
Message server is on aaa, but it will load balance and place you on either instance.
have following related parameters
wdisp/ssl_encrypt = 2
wdisp/ssl_auth = 2
wdisp/ssl_cred = C:\usr\sap\XXX\W00\sec\XXX.pse
wdisp/ssl_certhost = aaa.mycompany.com
wdisp/ssl_ignore_host_mismatch = TRUE
C:\usr\sap\XXX\W00\sec\XXX.pse has ssl cert of both aaa and bbb servers.
All seems to be working, as users are load balancing. They are not getting certificate mismatches in their browser anymore. We are getting the SSSLERR_SERVER_CERT_MISMATCH errors, but the messages do not seem to cause an issue since we have wdisp/ssl_ignore_host_mismatch set.
Can we eliminate those mismatch errors instead of masking the problem with wdisp/ssl_ignore_host_mismatch?
Should each portal instance have their own ssl cert, or is there a way to use one cert such as the aaa.mycompany.com cert on each portal instance? It seems like that might eliminate the mismatch errors. However, what happens when you go directly to the bbb.mycompany.com portal instance? there is a certificate error if you specify aaa's and you go to bbb. I was wondering if the wdisp/ssl_auth and wdisp/ssl_certhost are valid in the portal system so that each server uses the aaa server and certificate. I could not tell if this parameter is valid for java-only portal systems.
Thanks for your help.
Edited by: Fett Patrick on Mar 7, 2011 8:35 PM

Thank you Martin for your prompt reply. Can you clarify please, can we use the wdisp/ssl_certhost parameter in the instance profiles of the portal instances? I wasn't sure if that is only valid for webdispatchers or can also be used in abap/java systems?
We orginally had the aaa server certificate listed for each dispatcher in the portal under ssl provider runtime server identity. That caused a browser "certificate error" when accessing the bbb server. So we then installed an ssl certificate for bbb for its dispatcher. We could then go to either server with no browser "certificate mismatch" error.
Then when we added the webdispatcher, we started getting the server mismatch errors at the webdispatcher level. If the wdisp/ssl_certhost can be used in the portal profiles, then that would hopefully resolve direct access or via web dispatcher aceess mismatches. I.E. only the aaa ssl certificate would be used and parameters would be set at both the webdispatcher and portal profiles
Thanks, Pat.

Server Connection Error

Hello, I'm trying to scan a document to send to my email and I get the Server Connection Error message. I've tried several possible solutions that I saw online but nothing has worked. I've also added the Scan to Email app and it gives me the same message. Tried unplugging everything also, to no avail. Thanks

Hey @Riverside57,
Welcome to the HP Support Forum.
I understand you're encountering a 'server connection' error message when using your HP ENVY 5530 e-All-in-One Printer. I would like to help.
As I take it you're an HP Instant Ink subscriber, with respect to this message I recommend you call our Cloud Services at 855-785-2777. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you for posting in the HP Support Forum and have a great day!
Regards,
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

More than one Spaces are getting trimmed on BizTalk BAM portal

Hi All,
We are implementing BAM at our customer place , we observed ,if any field contains more than one space in input file then these spaces are getting trimmed in single space,however it is correctly sitting in the BAMPrimaryImport database
For example if input file ,which is processing through BizTalk, and if any field which value is "AB CDE" (field contain three space here ) then in portal it is appearing as
"AB CDE" (Only one space here) by default
I am not sure how theses values are displayed in portal and how to relove this default behiaver of BAM Portal, if somebody have faced this situation then i will appreciate your help please
Thanks
Yash

Well then I guess it's a Portal issue (yes you already knew that!) :-)
I know not everybody agrees with me, but the way I look upon it, the Portal should not be used as a product, but merely as a testing tool and inspiration as to what one can build on top of ones BAM activities. In other words, if you need to present your
BAM data to users, you should build your own; Pivot Tables, Reporting Services, ASP.NET Web sites etc. etc. on top of it.
Don't know if this is true, but I've heard that the BAM portal was a beta-product that shipped for the first time with BizTalk Server 2006 without being completed, and no code changes has taken place since.
Morten la Cour

Server connection error 403 - HP 5525?

Help please?

Hi Bogan,
Welcome to the HP Support forums. I understand that your Photosmart/Deskjet Ink Advantage 5525 printer is giving you a server connection error.
Please set a manual IP address and manual DNS servers for the printer. I have included a link to another post that has the steps, with screen shots, on how to do this.
If that doesn’t resolve the issue, please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Server Connection Error 403 - HP Photosmart 6520

My scanner all of a sudden stopped working and I got "Server Connection Error 403"
How do I fix this?

Hello @SeanTK ,
Welcome to the HP forums.
I understand that you are getting a Server Connection Error 403.
I would like to help.
You would only receive the 403 error if you are using scan to email.
There are a few things you can try to resolve this issue.
Hard reset the printer.
While the printer is turned on, unplug the power cord.
Wait at least 30 seconds.
Plug the power back into the printer.
Test the scan to email.
If you still get the error, try setting a manual DNS.
The following post by happytohelp01 has instructions for setting the manual DNS.
It is for a Photosmart 7510, but the steps should be very similar.
Re: Efax 7510 still won't work after turning off/on ePrint
If the Error is still present after setting the manual DNS, you should cycle your network.
Turn off your network devices, including the printer.
Unplug the power to your router for about a minute.
Plug the power back into the router.
Turn on your printer, and the other network devices.
When the blue wireless light on the printer stops blinking, try the scan to email.
Another option is to remove then re-enable the printers Web Services.
This will act like an uninstall and reinstall.
Caution: removing the printers Web Services will cause it to permanently loose its ePrint address.
If the ePrint address has been customised then that address will be lost forever.
Once you enable the Web Services again you will have to setup the scan to email.
This will provide you with a new pin.
If you need further deatail on any of the steps, please let me know.
You can also call our Cloud Services at 855-785-2777.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Hours:
Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

500 server timeout error

Hi
Its urgent!!
Our Production portal was working perfect. Suddenly the iviews is showing 500 server timeout error
Error: -5
Version: 7000
Component: ICM
Module: icxxthr_mt.c
Line: 2698
Error Tag: {-}
Detail: Connection to partner timed out after 60s
The transaction iviews are working fine as of now. ESS iview, identity management are showing timed out error.
please help.
regards,
Sasha.
Edited by: Sasha on Feb 17, 2008 8:35 AM

Hi Sasha,
While i am running the web reports with huge sets of data i am getting the error like below. Could you please help me out on this issue.
Connection timeout(-5)
Error: -5
Version: 6040
Component: ICM
Module: icxxthr_mt.c
Line: 2603
Server:.........
Detail: Connection to partner timed out after 60s
It is very urgent for me, could you please helpme out.
Thanks in advance.
Best Regards,
Hari

BAM Portal Source Code

Hi,
Can I get complete source code of out of the box BizTalk BAM Portal?
Thanks and Regards, Sagar.

Hi sagar,
<<BIZTALK INSTALLTION DIRECTORY>>\Microsoft BizTalk Server 2010\BAMPortal
contains the image and stylesheet for your BAM portal. If you want to add your company’s image in the BAM portal, you can do so along with the Microsoft logo or play with these files, but the soruce
code is not available. I don’t think the soruce code is avilable from BizTalk 2006 onwards.
If you want to develop a custom BAM like porta lyou have some options:
Use BAM Web Services,  Management and Query to create custom BAM portal.
accessing data from BAMPrimaryImport  database’s
bam_<Activity      Name>_AllInstances views
Or useBAMManagementService
API
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

Why do I keep getting Error 519: Server interface error" - Server interface error "no component returned from creativewidget' Line: 479 - var test = parent.add('statictext', undefined, text) when I try to use pattern fill/scripted patterns. I have unin

Why do I keep getting Error 519: Server interface error" - Server interface error "no component returned from creativewidget' Line: 479 -> var test = parent.add('statictext', undefined, text) when I try to use pattern fill/scripted patterns. I have uninstalled and re-installed PS CC. I have opened holding down shift to disable third party plug-ins. I have moved 3rd party plugins to a temp location outside of ps and it still doesn't help. It worked once, and only once and now won't work at all.

Unless your Photoshop question has to do with a download/install error, you should ask in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

BAM Portal Aggregations Outside server - OWC Error

Similar Messages

Maybe you are looking for