BAM Samples for Tutorial not found

Hi,
I installed BAM (with Enterprise Link); working on Tutorial #5; I need to execute "Simulate Events" to push JSM events. Problem is I do not find C:\~\BAM\Samples\SimulateJMSEvents directory; under the BAM install I do not find any of these directories; do I have to install something else; what did I miss?
Any input would be greatly appreciated.
Thanks.

Hi,
I sure that You saw this page, but it's the better to look for information and tutorials about Oracle Bam.
http://www.oracle.com/technology/products/integration/bam/10.1.3/htdocs/1013_support.html#tutorials
Afonso

Similar Messages

Document splitting: Items for clearing not found

Dear All,
I have created bank gl without tick of open item management now i have activate OIM & Transcation exisit for the same
I have done it as given below:
1) I have made GL balance Zero by posting an additional entry by F-02 (document type SA)
2) Block the GL for posting
3) though help of programe RFSEPA02 i have done the same.
Now the GL is OIM
Now i have to reverse the additonal entry pass to make GL balance zero
At the time of reverse through FB08 system gives an error massage
*" Document splitting: Items for clearing not found"*
Please any one help to resolve the issue
Thanks
Vijay

Dear Gladys xing
Thanks for your reply,
I have also done the same thing by passing one more entry to create the same balance.
When i am trying to clear open item for the both the extra entry system gives an same error
"Re: Document splitting: Items for clearing not found"
is this possible to clear that open item through F-03
Thanks
Vijay

TS1538 Followed troubleshooting for iPhone not found in devices iTunes and that did not work... Now what?

Followed troubleshooting for "iPhone not found in devices" iTunes and that did not work... Now what?

That's what I tried. The 6 steps and I do not have security software on my phone. iTunes on my Mac is still giving me the warning that I need to download the latest version on my phone, and is not recognizing it in devices, which is the irony because that's what I need to actually update it

Looked for but Not found

I have looked for but not found. So that means that more than likely I have just not looked in the right place.
What I am trying to find is the total number of contacts the the 8530 will hold. IE; 500? 1000?
I know that each contact will take so many numbers and so many email address's but how many individual contacts will it allow you to add?
STRIKE HOLD!
Land of the Free Because of the Brave!
Solved!
Go to Solution.

Hi and welcome to the forums!
I have yet to see a credible source publish actual limits for records on any of the calendar, memo, tasks, or contacts apps. If you find one please post. I usually tell users to keep it manageable. To me 6,000 contacts? Seriously?
Heck I wasn't stationed with 6,000 people in the U.S Army! .
Remember the device memory is flash memory, designed for keeping all device functions running at peek levels. Storing large amounts of records just takes that much dynamic memory and makes it static.
Let me know your thoughts!
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Su[12345] : passwdutil.so: nameservice switch entry for passwd not found.

Hello all,
I got a problem with my Sun Fire, with solaris 10, when my system boot, we got a powerfailed :-( and when my sun restart again after a long checkdisk with many errors... i got this error everytime i want to do a su.
su[12345] : passwdutil.so: nameservice switch entry for passwd not found.
I don't know how to fix that.
If anyone have a working solution, i would be wonderfull :)
Thanks in advance

Use your service contract and open a support case with Sun.
http://www.sun.com/secure/contact/
You will then be able to draw upon all their support resources.
They will be able to help you investigate the health of all the hardware,
as well as work with you to decide whether you need to install all your
software all over again, due to too much corruption in the filesystems.
Electrical interruptions can sometime do some nasty things to data on disk drives.

Error while running Validation Data for category not found in application

Dear Experts
While running Validation and IC Matching I am getting Error i.e. "Data for category not found in application CONSOLIDATION"
May some one tell me the reason and resolution.
Thanks
Ritesh

Hi RItesh,
I suppose your problem was solved in the meanwhile.
Anyway we had the same issue, when running Validations against ICMatching App.
That was because Method VALIDATION of Class CL_UJP_VALIDATE tries to relevant data in order to perform calculations (line 127), but if no data is found, ends raising an exception (with a misleading text line 143).
read_trans_data_sqe( exporting i_application = d_application
                                 it_dim_list = dt_app_dim_list
                                 it_sel = lt_sel
                       importing
                                 er_t_data = lr_data
assign lr_data->* to <lt_finance>.
create data lr_data like line of <lt_finance>.
assign lr_data->* to <ls_finance>.
lr_data1 = lr_data.
if <lt_finance> is initial.
NO DATA FOUND -> EXCEPTION
    raise exception type cx_ujp_process_exception
          exporting textid = cx_ujp_process_exception=>ex_no_data_found
                    d_application = d_application
                    d_value       = l_value.
endif.
Hope it helps
GFV

Validation- RUN_LOGIC:Data for category not found in application T_SALES

In BPC NW 7.5...
I set up the validation business rules to check that Account A = Account B. When I run the validation package through DM, I got the error that stating RUN_LOGIC:Data for category not found in application T_SALES. I have 3 members in my Category dimension: ACTUAL, FORECAST and PLAN. The same error appeared even if I hardcoded the category member in the script logic:
*RUN_PROGRAM VALIDATION
CATEGORY = %T_CAT_SET%
CURRENCY = %RPTCURRENCY_SET%
OTHER = [ENTITY=%P_CC_SET%]
TID_RA = %TIME_SET%
*ENDRUN_PROGRAM
Do you guys have any clue on the error?
Thanks in all advances,
Yen Li

Hello,
this error isn´t about category dimension. The system checks if all needed dimensions exists, and if not it gives this error. You can use debug to seach for the dimension in fault.
Best Regards,
António

Pcre-config for libpcre not found.

hi
When i am configuring apache to set reverse proxy.. i found the below error
configure: error: pcre-config for libpcre not found. PCRE is required and available from http://pcre.org/
when i check with pcretest it is showing me PCRE version 6.6 is available. but when configuring it is not connecting to this pcre. I am accessing a remote desktop.
thanks

hi
When i am configuring apache to set reverse proxy.. i found the below error
configure: error: pcre-config for libpcre not found. PCRE is required and available from http://pcre.org/
when i check with pcretest it is showing me PCRE version 6.6 is available. but when configuring it is not connecting to this pcre. I am accessing a remote desktop.
thanks

Work around for server not found problems on FF36

I have found a work around for all the people having server not found problems with FF36.
If you manually set your network adapter DNS to an external DNS server (as opposed to your local ISP) then the problem goes away. I set mine to use the two google DNS servers:
Preferred: 8.8.8.8
Alternate: 8.8.4.4
Not a clue why this works but it is 100% successful on my desktop PC, whereas before I could hardly connect to a webpage with FF36 without multiple page refreshes and much frustration, even though FF35 was fine and rolling back to FF35 was also fine.
Something has changed in FF36 and either the way it handles DNS or the way it works with some network adapters.
It is nothing to do with add-ons, profiles or firewall software as I have tried all of these things and only the DNS change made a difference. I even copied over a full working profile and the program files directory for Mozilla from my portable which was having no problems and the problem still existed on the desktop, which is why I started looking at the network adapater since everything else between the working PC and the non working one was identical.
Hopefully this will help the developers to pin down the real cause of the problem and fix it in the next release.

Well done. Thanks for finding that.
That is not only assigned but has an approved patch included in the scheduled Fx36.0.1 release so it should be fixed in few days, watch out for the upgrade.
* Bug 1093983 - DNS resolver should not use 'ANY' to get cached records for TTL <sup>[https://bugzilla.mozilla.org/show_bug.cgi?id=1093983#c35 c#35]</sup>
* https://wiki.mozilla.org/Firefox/Channels/Meetings/2015-03-03#Schedule_Update
With the bug now fixed it would not really be appropriate to add further comment. I do now see another related bug assigned but not being fast tracked, so if all goes well that will probably land in Firefox 39.
* Bug 1138242 - DNS: Request A and AAAA record types rather than ANY when obtaining TTL on Windows

Include report for class not found

Hi all,
I am getting an error in test system after transporting from devolopment system
IN SE24,if do a syntax check for the class
include report CL_EX_TEST======CO not found .But in devolopment system,i am not getting any error.
ANybody plz help.
Regards,
Tess

Hello Tess
The previous answers are misleading because you obviously do not transport a standard class from DEV to QA system. Instead I assume you are using class CL_EX_TEST within your z-class.
Please check in table <b>PROGDIR </b>whether their is an entry for CL_EX_TEST======CO (protected section) on the QA system. I guess it is missing.
If so have a look at the DEV system how this entry looks like and add it to table PROGDIR on your QA system.
This is a common error (at least for me) with standard classes:
Macros section not available
Regards
Uwe

Mapping for component Not Found Error ?

Hi does anyone know how this error can be fixed I am trying to refer to a compnent called task and it
is saying I have not mapped it yet it has been mapped inside my coldbox framework ?
The error I get is:
Coldfusion.orm.EntityMappingNotFoundException: mapping for component task not found
Any help would greatly be appreciated on this.
Thanks

When using ORM generator to generate cfcs make sure that Application.cfc has unique app names in order to solve the problem above.

[Solved] Recommend a package with pacman for "Command Not Found"

Is there a way to get Pacman to recommend a package name like in ubuntu, for example:
If I were to type in a terminal ifconfig and it said "Command not found"
Could Pacman recommend the package net-tools?
Last edited by jack9099 (2011-08-03 14:33:39)

The pkgtools package will do this for you.
See https://wiki.archlinux.org/index.php/Pkgtools for instructions on how to set it up.
Last edited by szim90 (2011-08-03 14:25:58)

Oracle 11gR2 HR sample schema scripts not found

after installing oracle 11gR2 on Linux (software + create new database without sample schema); I want install sample HR schema now but the problem is
required scripts to create HR schema not found in 'demo' folder :
[oracle@host schema]$ pwd
/home/oracle/app/oracle/product/11.2.0/db_1/demo/schema
[oracle@host schema]$ ls -l
drwxr-xr-x 2 oracle dba 4096 Sep 4 07:41 bus_intelligence
-rw-r--r-- 1 oracle dba 2322 Apr 3 2009 drop_sch.sql
drwxr-xr-x 2 oracle dba 4096 Sep 9 12:59 human_resources
drwxr-xr-x 2 oracle dba 4096 Sep 4 07:49 log
-rw-r--r-- 1 oracle dba 1769 Sep 4 07:53 mk_dir.sql
-rw-r--r-- 1 oracle dba 1769 Sep 4 07:53 mk_dir.sql.ouibak
-rw-r--r-- 1 oracle dba 1600 Aug 16 2006 mk_dir.sql.sbs
-rw-r--r-- 1 oracle dba 27373 Jun 30 2007 mkplug.sql
drwxr-xr-x 3 oracle dba 4096 Sep 4 07:49 order_entry
drwxr-xr-x 2 oracle dba 4096 Sep 4 07:41 sales_history
-rw-r--r-- 1 oracle dba 15246 May 10 2005 sted_mkplug.sql.dbl
[oracle@host1 schema]$ ls human_resources/
hr_code.sql
what's wrong ??

Pl post exact OS version. When installing the software, did you download and unzip all 7 DVDs or just the first 2 ? If just the first 2, you will need to download the examples separately
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-linuxsoft-085393.html
or
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-linx8664soft-100572.html
then follow instructions in the Samples Guide - http://docs.oracle.com/cd/E11882_01/server.112/e10831/toc.htm
HTH
Srini

Web Reference inside Script Task causes Binary code for script not found error

I am attempting to access a SOAP web API (sales force) from a SSIS package. To do this I created a script task.
Inside the script task I went to Add Service Reference. Then I click advanced to make it a web reference. Then I point it to the WSDL file and give it a name SFEnterprise. It successfully finds and adds the Web Reference to the script task.
I leave scriptMain.cs alone and I have no warnrings and no errors. Now in the solution explorer I right-click the script task and hit BUILD. I see the message from Output that BUILD succeeded.
I close the VSTA script editor and now I am back on the control flow window. However I have a red X on the script task with the following message. "The Binary code for the script is not found. Please open the script in the designer by clicking EditScript
button and make sure it builds successfully"
But it does build successfully! And I have not even added any custom code except for the web reference using the WSDL file.
I am using SSIS 2012 and Visual Studio 2012. I have been reading about this binary code error message on Google searches and suggestions about delay validation and turning off pre-compile do not apply to SSIS 2012.
Is SSIS not capable of doing this?

I was wanting to use the 2.0 coding style of accessing the soap service which is supported by adding the web reference vs. adding a service reference. But using a service reference instead of web reference actually allows the script task to compile. This
is really odd behavior. I wonder why one works and not the other.
Changing my C# code over to service reference coding style to access the SOAP service was still returning an error. When I added a break point I found the error message "Could not find default endpoint element that references contract in the ServiceModel
client configuration section"when calling new SoapClient();
I found this page http://www.sqlis.com/sqlis/post/Where-is-my-appconfig-for-SSIS.aspx and after I copied the System.ServiceModel app settings from the script task app.config to the DTSDebugHost.exe.config it was able to successfully login to the endpoint
during package debug mode.
This means I will have to edit the SQL Server DTS config files on the prod SSIS server to get the package to actually run in the job agent.
So for now I am good I think just plugging away at coding what the script task is actually supposed to do now that is can actually login.

Folder for pictures not found...

Hi!
The homepage for my company (actualy just a placeholder) has been run for a long time on a leopard server.
I now updated to OS X Server and the logo is not found, though I believe it is on the right place (/Library/WebServer/Documents/BLUM/)
I manualy put the /pictures folder in there, but cannot find the index.html.
Can anyone help me locate and fix this?

The HTML Code is:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Unbenanntes Dokument</title>
<style type="text/css">

</style></head>
<body>
<div align="center"><img src="pictures/blumlogo.png" width="320" height="480" alt="BLUM Informatik GmbH" longdesc="http://www.bluminformatik.ch/" /></div>
</body>
</html>
i tried changing to BLUMLogo.png to no avail...

BAM Samples for Tutorial not found

Similar Messages

Maybe you are looking for