BAM training in the UK

Hi there, I have been looking at training options specifically in the BAM area, yet there does not seem (at least on a cursory check) to be much at the Oracle University.
Can anyone recommend where I can go for classroom based training or any other training options?
Thanks

Hi
BAM training is offered by Oracle prd group. Please send email to [email protected] We are planning activities in UK, and can look at your requirements, Pl let us know your name, organization, area in UK.
We will reply back to you with details
thanks

Similar Messages

Slight roadblock in "DW 8 with ASP, ColdFusion, and PHP: Training from the Source"

I'm working my way through Dreamweaver 8 with ASP,
ColdFusion, and PHP:
Training from the Source. I've come to the middle of Lesson 6
and have hit
my first obstacle in learning PHP. I'm following the
instructions to format
the output of the tour price calculator, but my issue is with
where to place
the following PHP code: <?php setlocale(LC_MONETARY,
'en_US'); echo
money_format('%i', $tourPrice); ?>
I placed it before the DOCTYPE and when that didn't work, I
tried inserting
right before the code that retrieves the tour price (in the
body of the
page). That didn't work either.
I also tried changing money_format to number_format and
manually inserting
the $, but when I tested everything, the output printed as
follows:
The estimated cost of your tour is
$0.00000000000000000000000000000000000000000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000000000000000000500.
I'm not quite sure where I've gone wrong.
Thanks for any help,
Heather

Coach Bob wrote:
> David,
>
> I would like to understand better your comment about the
money_format. The
> ability to use it is dependent on the host system's
support of the C library
> function strfmon(), correct? So if a user were
developing on a windows box with
> a local WAMP install it would not work while it may work
on their *nix-based
> Web host?
Check the PHP documentation - it tells you all you need to
know:
http://www.php.net/manual/en/function.money-format.php
> I will see to it that it gets corrected in the next
version of the book!
I've no idea what relationship you have with "Training from
the Source",
but I find it interesting - to say the least - that you need
to the ask
the author of a rival book.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

ANN: Dreamweaver CS5 with PHP: Training from the Source - Rough Cuts

If you would like to get early access to my next book "Adobe Dreamweaver CS5 with PHP: Training from the Source", the first six chapters (of 12) are now available as Rough Cuts in Safari Books Online.
If you have a Safari Library subscription, you can view the chapters free of charge, and see new ones as they're added. Without a subscription, you can get access to the book in PDF format for $34.99, including the finished ebook version when the book is complete. You can also opt for the Rough Cuts PDF and Print bundle for $67.48. The print version is expected to be released in early August.

FIXED!!
1)
i finally did get the message problem was with:
$mailhost='ssl://mail.domain.com';
ssl:// was just nonsense and been removed
2)
'auth' => 'true' was changed to 'auth' => 'login'
3)
for bluehost i got information that it was tls secure connection protocol not ssl
'ssl' => 'tls'
4)
port used '25' not 465.
Didnt still tried 26 and 465 maybe they would work too.

Adobe flex 3 training from the source, code download

I've got this book here
adobe flex 3 training from the source
but we've lost the cd's, can I download the code?

I've progressed to Lesson 13 where the reported problem is
also happening. As i didn't keep the files for Lesson 9 this will
have to do. There are 5 files that show up as different in the SCR
folder in my code vs the COMPLETE folder of Lesson 13. All of the
differences seem to be cosmetic &/or style in nature so I have
no Idea what is going on. Note: the comment lines are just added in
this message so you can tell one file from another.

Training From The Source

Hi
being new to flex, I decided to get the Training from the
source book for flex 3, I have to say Im impressed so far.
I have an issue though the categorizedProducts.xml file on
the flexgrocer site seems to be empty. I am trying to run through
the examples. Anybody have any ideas as to why.
I have checked the code and tried a direct link and nothing
is returned although the file exists.
Thanks

I'm having the same problem with the Flex 4 and 4.5 books. same site:
www.flexgrocer.com/categorizedProducts.xml . The first flexgrocer link in the book www.flexgrocer.com/category.xml works just fine (if that's the correct link... i'm going by memory here)

Is Flex 4 Training from the source any better than Adobe's own Using Flex 4?

I am preparing for the Flex 4 ACE exam from Using Flex 4. Is there a good reason for me to switch to the training from the source book?

Firstly note that F4TFS is in 2 parts, and although part 2 appears to have been published at the end of 2010, AFAIK it appears to be unavailable right now. I have read F3TFS, and am going through F4TFS at the moment. Using Flex 4, available free as a 32Mb PDF, is a very useful reference, along with the 12 or so other Flex books available free from Adobe. While Using Flex 4 is a reference (including plenty of example code), F3/4TFS is structured as a series of lessons, working on the same project (Flex Grocer shopping cart app) throughout. It touches on most aspects of Flex development, and is a great guide for beginners. If I have one criticism of the book, it is that a shopping cart example is going to be inherently dull- so if you have a low boredom threshold you will have to force yourself through the examples. I would still recommend it as a beginner's book, although in the real world you are unlikely to be using Design Mode much, except for throw-away prototypes. If you have a project you want to get started on right away, then you could just wade in and start coding using the Adobe documentation for help, but if you'd like to have an existing example, then F4TFS is for you.
When learning Flex its best to read as much as possible, so I'd widen your reading if possible to include the Flex 4 Bible, AdvancED Flex 4, Enterprise Development with Flex, etc, and the absolute shedloads of blog posts and examples on the internet.

Adobe Flex 4: Volume 2: Training from the Source, Volume 2

This book was only published in late 2010 but seems to be unavailable from all online sellers. Volume 1 is widely available though. Anyone know why?

Hi All,
I've read Michael Labriola's,... book Adobe Flex 4: Training from the source, Vol. 1 and found it tremendous.
Tried to find next volume and failed. The question is:
Has anybody this book or it's not exist?
Can anybody help to find it preferably in pdf format or to look on the content at least?
Managed somebody to download it from torrent, megaploud and such, Is it real place where you can get it
or you may only get unnecessary subscription to sponsor service and no book?
Please answer to email: [email protected] or hear
Regards, Radmir (My real name)

Flex Training from the source

Hi everyone, I have the Flex 2 Training from the source book
and I have misplaced the CD that it came with. I was wondering if
somebody out there would not mind to send me a copy of the files? I
know I messed up by loosing it but I just cant find it and Im stuck
on a lesson and need the source code. Please help...... thanks in
advanced.
CR

I've progressed to Lesson 13 where the reported problem is
also happening. As i didn't keep the files for Lesson 9 this will
have to do. There are 5 files that show up as different in the SCR
folder in my code vs the COMPLETE folder of Lesson 13. All of the
differences seem to be cosmetic &/or style in nature so I have
no Idea what is going on. Note: the comment lines are just added in
this message so you can tell one file from another.

Training From The Source - Missing?

I have lost my CD for my Macromedia Flash MX: Training from
the Source book. Does anyone own this book and have this CD...If
so, maybe the files can be zipped and FTP'ed to me. Any help would
be greatly appreciated!

problem solved :o) Lots of trial and error but got there in
the end

BAM Deployment error - Microsoft.BizTalk.Bam.Management.BamManagerException: The BAM deployment failed. --- Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server "ServerName".

HI,
I am getting below error while deploying BAM activity ...Pls help me resolve this issue.
Microsoft.BizTalk.Bam.Management.BamManagerException: The BAM deployment failed. ---> Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server
"ServerName". ---> System.Data.SqlClient.SqlException: An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or
[] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed.
Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias
to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An
object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column
name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing
or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For
SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements,
verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column
has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For
other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements,
look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock,
Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at
System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean
sendToPipe, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteBatches(String cmdText) at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteNonQuery(String
cmdText, CommandType cmdType, Boolean inTransaction, Transaction transaction) --- End of inner exception stack trace --- at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteNonQuery(String cmdText, CommandType cmdType, Boolean inTransaction,
Transaction transaction) at Microsoft.BizTalk.Bam.Management.ViewModule.Create(XmlDocument defXmlDoc) at Microsoft.BizTalk.Bam.Management.WorkerModule.DispatchOperation(OperationType operation, XmlDocument defXmlDoc) at
Microsoft.BizTalk.Bam.Management.BamManager.ProcessOneBamArtifactType(BamArtifactType bamArtifact, OperationType operation) at Microsoft.BizTalk.Bam.Management.BamManager.ManageInfrastructure(OperationType operation) at Microsoft.BizTalk.Bam.Management.BamManager.Deploy()
--- End of inner exception stack trace --- at Microsoft.BizTalk.Bam.Management.BamManager.Deploy() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.HandleDeployAll() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.DispatchCommand()
at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Run() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Main(String[] args)

Your View Name, OLAP Cube Name and certain other restrictions listed @http://msdn.microsoft.com/en-us/library/aa561577.aspx
Please review your BAM Definitons.
Regards.

How can I generate pulse trains whenever the value of the gate changes?

I need to generate pulse train both at the rising edge and falling of the gate signal. My DAQ board has only two counters.
Have a nice day,
Jun

Jun;
As your DAQ board has only two counters available, I'm assuming you are working with either one of the E-series board or SMIO boards.
If that is the case, your board doesn't have the capability of generating triggered pulse trains. And that is what you need.
You will need to use the 660x family instead. Those boards have the trigger pulse train capability. Regarding the second part of your application; none of the DAQ boards has the capability of triggering a pulse train generation at both rising and falling edges of the same trigger pulse. You can configure either as rising or falling edge of the trigger pulse. Then, to accomplish wath you need, you will need to configure two counters, both having the same trigger pulse triggering a pulse train gen
eration, and one configured to trigger the pulse train at the raising edge of the trigger pulse and the other to trigger at the falling edge of the trigger pulse; then have an external OR Gate which the two inputs are the outputs of those two counters.
Hope this helps.
Filipe

Server Error (Training from the Source)

I'm working through 'Training From the Source' book and have
come across a server error with Chapter 12 and onwards. I have
created a register page and when I press the submit button the page
comes back with a server error;
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver] Operation must use
an updateable query.
/newland/register.asp, line 141
The line 141 is - 'MM_editCmd.Execute'
I don't understand what I've done wrong, the server behaviour
I used in DW is 'insert record' and the DSN is connected to the
database in the shared folder on my computer. I've had no problems
dynamically when I've needed to show info from the database but
when it comes to inserting/updating it doesn't let me.
Any ideas where I've gone wrong?

It's a permissions issue. See my article on the subject:
http://www.charon.co.uk/content.aspx?CategoryID=27&ArticleID=56
Jules
http://www.charon.co.uk/charoncart
Charon Cart 3
Shopping Cart Extension for Dreamweaver MX/MX 2004

Hello, I would like to produce 2 different pulse trains on the CTRo and CTR1 output pins.

(DAQ-CARD E6024 PCMCIA)I have the 2 output pins monitored on my scope, when CTR0 puts out a pulse train, CTR1 goes high. When CTR1 puts out a pulse train CTR0 goes high. Also, the pulses are interleaved with each other. Is there a way to make then start at the same time
Attachments:
Stim_Output_pulses_CTR_0,1.vi ‏94 KB

Hello Zoltan,
I would suggest using the counter gates to synchronize the counters. You will need to externally run a wire from one of the DIO lines you're not using to one of the counters' gates. When the counter gate is high, the pulse train will be generated on each counter. Both counters will need to use the same PFI line as the gate.
There is an example program that ships with LabVIEW 7 called "Gen Dig Pulse Train-Continuous-Pause Trigger" for DAQmx. This demonstrates how to configure the counter to only generate the pulse train when the gate is high.
With this configuration, you could synchronize the counters by writing to the DIO line which is wired to one of the counter gates when you're ready to start the pulse train generation.
Hope t
his helps.
Kristi Hummel
Applications Engineer
National Instruments

Attempting to upload files using the zend _file_transfer system from cs5 training from the source. [was: Question for David Powers]

I am attempting to upload files using the zend _file_transfer system from cs5 training from the source.
On trying to upload to a remote server I am having trouble with the destination setting (C:/upload_test) in the example, please could you point me in the right direction for the an example of this setting for a remote file transfer
Also do I have to construct a connection file to activate a Ftp file transfer?
David Woolston

>I am on windows platform
Who is your host? When you checked your host path in your host control panel, what did it say?
>i have assumed (may be incorrectly) that the purpose of the exercise was to upload to a remote site (ie my website)
That is correct.
>Of course that upload might take place on a computer that does not have DW installed (an internet cafe for example)
That's irrelevant. DW is just the tool you are using to build your site. The site runs on your hosting accounts servers. This includes the php scripts you are working with.
>I have uploaded all files necessary for the operation, when i click upload it returns no such directory exits.
Do you have a url we can check? What destination are you specifying in zend code?
>This made me suspect that I would need to construct a ftp file transfer connection file to satisfied username, password , connection address etc
The exercise you are dealing with is using http file transfer. This has nothing to do with FTP. You do not need FTP for this, other than using it to move your source code from your local client to your server.

Multiple BAM installations on the same machine?

Hi guys,
I have a customer with the following requirement:
"We have installed BAM 10.1.3.3 with EL and upgraded to 10.1.3.4. It is currently using a remote database 10.2.0.3 in our test envt. We want to use the same Windows server for monitoring our Development enviroment also using the Dev database. Is it feasible or will it corrupt the IIS of the windows machine already running BAM 10.1.3.4. Please provide your recommendations on this, whether to have separate windows servers or we can have multiple BAM installations on same server."
Any ideas on this?
Thanks in advance,
Catalin
Oracle Support Services

Multiple BAM 10g installations on the same box is not supported.

BAM training in the UK

Similar Messages

Maybe you are looking for