Bandwidth Impact?

I am wondering how often the CS-MARS v5.3 polls devices? I have added a couple of routers to the Security and Monitor Devices section and set the SNMP community string as well as the telnet access method. Does the MARS appliance poll via SNMP and telnet or does it just use telnet for discovery and mitigation? I would like to add the rest of the routers in my network but am affraid that I will overload the smaller bandwidth links we still have in place in some locations. Any help would be appriciated.

I think it depends on what you consider "Smaller bandwidth".
I use a CS-MARS50 (6.0) and I have multiple sites still only using a T-1 frame relay lines.  I get netflow and logs from them to our MARS.  When I look at our NetFlow Traffic Analyzer, the traffic doesn't even make the top 100 conversations.  Hope that helps.

Similar Messages

  • Share small real-time example using Narrowing Cast & Widening Cast

    Hi Guys,
    I am trying to understand the concept of Narrowing Cast and Widening Cast and getting confused why we are using these Casts. When we can always access the method of Subclass using its ref object in Narrowing ) and use the Super class with its ref object (in Widening).
    I understand the concept but could not understand under what situation cast is preferred.There are articles all over the web to explain the concept, but non told us why and when we are forced to us these CASTS.
    I will appreciate if somebody can share a small real-time example where use of Narrowing and Widening Cast is advisable.
    Thanks,

    It looks like this topic has lost steam. 
    I'm surprised this isn't a more intense conversation. There are many applications that need to share data.
    In my application I have many hundreds (in some few cases in the thousands) of different types of data streams including DIO, Analog, and many different types of Serial buses.
    My application is already controlling the hardware and data streams, but others want to peak into my I/O including what is happening on the serial buses.
    To create a 'get' function for each I/O in a web page would seem farily intense (although I could probably create a VI script to help build it).
    I was looking for solutions along the lines of maybe coping the data into a VISA service (if that is possible), or publishing to a datasocket server, or creating a network published variable.
    I need to be considerate of the possibility of hundreds of serial buses banging a service and the possible bandwidth impacts. So I'm searching for a solution that is both easy to implement and low on resources.
    For now I'm leaning towards datasockets. Does anybody have an opinions on this?

  • CRM 2007 network Activity

    We've recently tested the CRM 2007 impact on our network from a Citrix platorm and from the local desktop, with varying screen resolution settings to determine network bandwidth impact.  We noticed that while the session was completely idle, there was still network activity over the port we use for CRM ICWeb session connections to the tune of about 70000 bytes per minute for one session (approx 167 packets).
    Can anybody advise what this traffic would be?  I have seen references to a network polling strategy, but no details.
    Edited by: James G. Earp on Apr 15, 2008 9:23 AM

    Hi,
    You can use FM, CRM_ORDER_MAINTAIN to create follow up documents.
    you need to fill the parameters.. ct_doc_flow, ct_input_fields ..
    See some sample code, below..
        CLEAR : ls_doc_flow, ls_doc_link .
        ls_doc_flow-ref_kind   = lc_ref_kind.
        ls_doc_flow-ref_handle = lc_ref_handle.
        ls_doc_link-objkey_a   = p_lv_guid. "Guid of Preceding Doc
        ls_doc_link-vona_kind  = 'A'.
        ls_doc_link-handle_b   = '1'.
        ls_doc_link-brel_kind  = 'A'.
        ls_doc_link-brel_mode  = 'A'.
        INSERT ls_doc_link INTO TABLE lt_doc_link.
        ls_doc_flow-doc_link = lt_doc_link.
        APPEND ls_doc_flow TO lt_doc_flow.
    Thanks,
    Sreekanth

  • How much BW does iCloud use

    When iCloud shares my files to all of my devices, is it pushing individual copies of each file to each of my devices, or is it more like a multicast where one stream is sent and each device joins that multicast pushing that file?
    I'd like to better understand what the total bandwidth impact is on my broadband connection when I use iCloud, especially if I am away from home.  As an example, if I take 500 photos with my iPhone and download a bunch of movies and songs from iTunes while I am on vacation, and I have iCloud set up on 4 other Apple devices at home, do those 500 photos and movies and songs get pushed to each device individually (assuming my WiFi is on),  If my broadband provider has usage caps, does iCloud exponentially increase my likelihood of hitting that usage cap?

    Hello,
    I'd assume that they're all individually getting them unless they are directly connected to a Computer that is Syncing them.

  • Why the difference in plans between USB modems/hotspots and tablets?

    I have a USB760 3G USB Modem that I want to activate on Friday when I get paid.  I went to the Mobile broadband plans webpage and looked at the pre-paid plans that are available.
    However, they price data access differently for USB modems/hotspots than they do tablets. 
    For a USB modem, I can get only 1GB for $50.  But with a tablet, I'd get 2GB for $30.
    Why the difference?  Can anyone explain this to me?
    I would appreciate some info.  I called the phone center, and they were no help and knew nothing.  I thought maybe someone at Verizon would read this and actually be able to give me a sensible explanation of why data plans for a USB modem are so much more than for a tablet...especially when my USB modem is 3G and won't have as much bandwidth impact as a newer model.
    Thanks.

    Probably because you were reading the information incorrectly.  Per the table below, you get 5GB for $50 for the USB Modem.  You just don't have the option of the 2GB plan with the modem as (and this is my guess) most users use more than 2GB per month with those devices.
    Hope this helps.
    Mobile Broadband Plans
    How much data do you need? That depends on you. The more data you have,
    the more you can do like surf, game, and more.
      Calculate Data Usage  
    2GB – $30/Month
    5GB – $50/Month
    10GB – $80/Month
    Tablet/Netbook
              X
              X 
              X 
    USB Modem/Notebook/
    Dedicated Mobile
    Hotspot/Verizon Jetpack™
              X
              X 

  • Bandwidth Utilization Avg or Max for capacity Planning best practice

    Hello All - This is a conceptual or Non-Cisco product question. Hope you can help me to get this best industry practice
    I am doing a Capacity planning for the WAN Link Bandwidth. To study the last month bandwidth utilization in the MRTG graph, i am seeing  two values
    Average
    Maximum.
    To measure how much bandwidth my remote location is using which value i have to use. Average or Max?
    Average is always low eg. 20% to 30%
    Maximum is continuous 100% for 3 hour in 3 different intervals in a day and become 60% in rest of the day
    What is the best practice followed in the networking industry to derive the upgrade size of the bandwidth by using the Utilization graph
    regards,
    SAIRAM

    Hello.
    It makes no sense to use average during whole day (or a month), as you do the capacity management to avoid business impact due to link utilization; and average does not help you to catch is the end-users experience any performance issues.
    Typically your capacity management algorithm/thresholds are dependent on traffic patterns. As theses are really different cases if you run SAP+VoIP vs. youtube+Outlook. If you have any business critical traffic, you need to deploy QoS (unless you are allowed to increase link bandwidth infinitely).
    So, I would recommend to use 95-percentile of maximum values on 5-15 minutes interval (your algorithm/thresholds will be really sensitive to pooling interval, so choose it carefully). After to collect baseline (for a month or so)  - go and ask users about their experience and try to correlate poor experience with traffic bursts. This would help you to define thresholds for link upgrade triggers.
    PS: proactive capacity management includes link planning for new sites and their impact on existing links (in HQ and other spoke).
    PS2: also I would recommend to separately track utilization during business hours (business traffic) and non-business (service or backup traffic).

  • Significant Increase in Bandwidth

    Hi there
    This is probably not a big problem for most other people in the world, but bandwidth/traffic is a big deal to us as we pay for every MB we use. Since we've implemented JavaMail and got our clients to switch from Outlook they say that they have had a huge increase in the amount of bandwidth used. Sometimes 4 to 5 times the previous total traffic.
    Is it possible that the way JavaMail downloads the emails from the server (POP) could be any different that e.g. Outlook? I am fairly sure we do not download the same message more than once.
    Any help will be appreciated!
    Marius

    Are you sure Outlook was using POP and not some Microsoft proprietary protocol?
    There aren't a lot of choices with the POP3 protocol. JavaMail will download the
    headers first if you only access the header information, and then will download
    the entire message (headers and body) if you access the message content.
    If you know you're going to access all the content you can avoid the first download
    of just the headers, but still that shouldn't be a significant impact on bandwidth.

  • Link utilization impact on responsiveness

    Hello,
    I'm reading a book, and here it says:That as the link utilization grows (even from 10% to 50%) the responsiveness time grows. I always thought that if the link is ~90proc utilized, then the drops can occur. Can someone explain from physics field, why the utilization till ~50% increases the latency. If we would have a 10gb link and it will be utilized 50% the user will feel bigger latency than the link utilized ~20% ? Why ?
    Picture attached.

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    The interrelationship between link loading and latency (and drops), and its impact to traffic, is much, much more complex than what that text is explaining.
    Without touching on the many, many variables involved, I suspect what the text is alluding to is latency that exponentially begins to increase as utilization approaches 100% due to queuing delays.  Simple queuing theory would, with utilization below 50%, (rarely) should there be more than one element queued.  Once, however, utilization rises above 75%, elements queued will start to skyrocket.  This is what the first graph is showing.
    In simple queuing, we normally allow for an infinite queue, but we certainly can decrease possible latency by limiting the possible queue depth.  Of course, in real networks, a high drop rate generally is adverse to most traffic too.  I.e. even though you can avoid high latency, high drops might actually be even more adverse.
    If you search the Internet, you can find simple queuing calculators which will, given a certain load percentage, show you what the average queue depth will be at that load percentage.
    In any case, again, real world link loading, and it's impact to traffic, is very complex.  Depending on the needs of the traffic, even 30% utilization might be too high while conversely 100% utilization doesn't always mean you need more bandwidth.

  • How to limit bandwidth for guest per connection/user on 2504 WLC?

    We have 2504 Controller with 24 AP's registered in a hotel and we would like to limit bandwidth per connection or per user.
    I went to QOS Profiles > Bronze >
    I do not see Per user Bandwidth Contracts(K)* instead I see WLAN QOS Parameters with below options.

    Hello
    Our WLC model 5508, but there is confusion on difference between Override Per-User Bandwidth Contracts (kbps) vs Override Per-SSID Bandwidth Contracts (kbps)
    Our requirement-
    On Guest SSID  - Each user / session should not exceed bandwidth more than 758kbps upstream/downstream
    Only Guest users cannot login to multiple device with single userID - applicable only to Guest SSID other SSID should not get impacted.
    hope to get some response
    cheers
    ST

  • Store agent started to transfer large amounts of data, eating all my bandwidth.  Seemed to just start 5-6 days ago.

    About5-6 days ago store agent started to continuously run, sending and receiving large amounts of data.  This eats all my bandwidth quickly, essentially rendering my internet access worthless since I have to use satellite internet.  I have tried stopping it in the Activity Monitor , but it restarts again. I thought I might have had a virus or something.  I downloaded trend micro for Mac, but found its core services essentially did the same thing. I uninstalled, but found that store agent is still running non stop. Ideas?

    The storeagent process is a normal part of Mac OS X, not a virus. Remove Trend Micro, which is a quite poor choice for protecting yourself against malware in the first place (see the results of my Mac anti-virus testing 2014), and which isn't really necessary anyway (see my Mac Malware Guide).
    As for what it might be doing, as babowa points out, it should be present when the App Store app is open, and at that time, it might be occupied with downloading updates or something similar. If you keep force-quitting it in Activity Monitor, that probably ruins whatever download it was working on, so it has to start all over again, perpetuating the cycle. In general, it is a very bad idea to force-quit processes that are part of Mac OS X without a very good reason and an understanding of what they are.
    Go to System Preferences -> App Store:
    You will probably want to turn off automatic download of newly available updates, as well as automatic download of apps purchased on other Macs (if you have other Macs). I do not advise turning off the master "Automatically check for updates" box, or the one for installing security updates, as disabling those will reduce the security of your system. These security updates are typically small, so they should have very little impact on your total internet usage.

  • How to determine network bandwidth for EP 6.0 implementation

    Hi
         can you please guide me how to determine the network bandwith requirment for SAP EP6.0 implementation for smoother operation
    Thanks & Regards
    Ashutosh

    Hi Ashutosh,
    luckily network bandwidth is mostly not a problem as long as it is not very small, e.g. a modem dial-up 56kbps connection on client side. To make sure that the server side outgoing line is strong enough, you'd need to do some math and calculate from the expected request volume how much bandwidth you'd need. Some guidance might be taken out of the how to paper under this link:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how to perform sap enterprise portal load testing.zip.
    Check chapter 2.4 in the pdf file.
    For "smooth operation" you'd need network wise not only worry about bandwidth but also about network latency times and sometimes network quality in regard to % package losses or similar. If your end users are more then 1000 miles away you usualy start seeing response time increases from latency times...
    The impacts of networking on performance are many, but so are the tuning possibilities. If you have a lot of end-users accessing EP over a WAN, perhaps even over the Internet, and if they do so over long distance you might want to make EP landscape WAN tuning a dedicated task in your project.
    In addition the network requirements of Portal are discussed in this paper : http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000757275&_SCENARIO=01100035870000000112&_OBJECT=011000358700003943521999E , chapter  3.5.2 Enterprise Portal.
    Best Regards, Joerg

  • Impact of changing VLAN bandwidh if my physical port is 10G?

    My monitoring system is reporting that VLAN X is 100% utilization in my 6509. That VLAN is used to pass traffic between two 10G access ports in that VLAN X. It seems that by default the VLAN bandwidth is 1G, however i am passing more traffic than that in that 10G connection. Is it safe to just change the bandwidth to the VLAN without impact? I think it is but would like to know if someone has some experience with this.
    Thank you,
    Francisco.

    Hi,
    There should not be any issue by changing it accordingly to the actual speed of the interfaces. Typically the interface bandwidth command would be used to communicate the speed of the interface to Interior Gateway Routing Protocols (IGRP), so they would then calculate their metircs based on that value, the bandwidth value should be accurate, otherwise there would be cases where a routing protocol would rely on wrong values (please see below output) so would consider wrongly a path as equal as another and use them both equally. Please keep in mind also that the bandwidth command does not affect the actual speed of the interface. One more use of the bandwidth command would be in the adjustment of the initial retransmision parameters of tcp.
    Switch#sh run int f0/9 | in speed
     speed 10
    Switch#sh int f0/9 | in BW
      MTU 1500 bytes, BW 100000 Kbit, DLY 1000 usec,
    In this example, an IGRP would calculate its metric considering 100Mbps as the speed of the interface when the real speed is 10Mbps, that's because the bandwidth is set to 100000 Kb and it is the value that would be used by that IGRP.
    Regards,
    Aref

  • Bandwidth weight

    Hello everyone,
    I have a test lab with 2012R2 Hyper-V host, vmm 2012 r2 and 2 vms with 2012 R2.
    Host have 2 pNics 1Gbps. 
    I've deployed logical switch to host and teamed adapters.
    for vms i used 2 different port profiles:
    1: Min Bendwidth weight 1
    2: Min Bendwidth weight 100
    The problem that Min Bendwidth weight have no impact on network bandwidth testing results (pic below).
    Im using jperf for tests. Hyper-V host is jperf server and vms are clients.
    How does the setting minimal bendwidth weight is really work?
    Thanks.

    Minimum Bandwidth Weight controls how much bandwidth the virtual network adapter can use in relation
    to other virtual network adapters. The weight describes how much bandwidth to provide to the virtual network adapter relative
    to other virtual network adapters connected to the same virtual switch.
    As long as there are sufficient bandwidth available, you won't see any spikes between the two profiles here.
    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

  • What is the impact of a listening script?

    In a hosted environment, small things could add up — whether CPU cycles or bandwidth. 
    I have a script that opens 3 files upon InDesign launching and closes them upon Quit.   Is there any overhead to be worried about? 
    Thanks

    Hi,
    actually the VM Manager has no function in the HA of the VM servers itself. So in generall it would not have an impact.
    However if you want to manage a 24x7 server it is recommended to have the VM Manager also running in a high availability.
    Otherwise, what will you do if someone accidentally stopped a guest?
    I personally would not install the manager into a guest itself, if it can be avoided, since this does not really provide full HA.
    There is a good whitepaper, how to install the VM Manager in a failover cluster mode...:
    Using Oracle Clusterware to Protect Oracle VM Manager (PDF)
    http://www.oracle.com/us/026995.pdf?ssSourceSiteId=otnen
    Regards
    Sebastian

  • BandWidth limit

    Hi all,
    from my application we create some threads which invoke external Perl scripts to download a huge number of html files into the local machine.
    We have detected that when we run the application we have internet speed /access problems ...
    Is it possible to limit the bandwidth used by the application to avoid this kind of problems?
    What do you suggest me?
    Thanks!
    T

    Hi all,
    from my application we create some threads which
    invoke external Perl scripts to download a huge
    number of html files into the local machine.
    We have detected that when we run the application we
    have internet speed /access problems ...
    Which would seem pretty obvious to me.
    Is it possible to limit the bandwidth used by the
    application to avoid this kind of problems?
    What do you suggest me?Which application?
    If you are running perl scripts then they are running in their own process space so any limits there would require something in perl not java.
    How are you moving files and why do you need perl to do it versus FTP?
    Have you considered doing the file move only once a day in the middle of the night?
    Instead of moving all of the files at once you could move them one at a time. If you have multiple processes attempting a move a sequential move will have less impact (you can stagger it as well.)

Maybe you are looking for