Bandwidth required with new SAP GUi

Hey all,
I am trying to find out what is the bandwidth required for each user for each session for SAP GUI 7.0. With the old SAP GUI 620, we had 3 KB per user per session required.
Thanks in advance.
Laura

Hi Laura,
there shouldn't be very much difference. The [Sizing Guide "Front-End network requirements for SAP Business Solutions"|http://service.sap.com/~sapidb/011000358700003943521999E] doesn't mention any version dependent values.
Regards,
Peter

Similar Messages

Bandwidth requirement for accessing SAP via SAPGUI

Hi,
I have ECC 6.0 system on windows. I need connectivity from remote locations to central office where SAP server resides.
How to calculate bandwidth requirement for accessing SAP via SAPGUI from Remote locations?
Regards,
Nirav.

Hello,
please refer to the [Front-end Network Requirements for SAP Solutions|http://service.sap.com/~sapidb/011000358700003943521999E] document.
(The navigation path on Service MarketPlace would be http://service.sap.com/sizing > Sizing Guidelines > Solutions & Platforms, then search for the title above).
Best regards
Rolf-Martin

Bandwidth Requirement for accessing SAP

Hi,
I have ECC 6.0 system on windows. I need connectivity from remote locations to central office where SAP server resides.
How to caculate bandwidth requirement for accessing SAP via SAPGUI from Remote locations?
Regards,
Nirav.

Hi,
Please check the link below
https://fortress.wa.gov/dop/hrms/techinfo/NetworkReq.htm
Hope it helps you.
Rgds,
Suman

WebDynpro with embedded SAP GUI for HTML transaction

Hello,
I have been given a requirement for a WebDynpro application that will have some links and figures at the top and underneath that there will be a SAP GUI for HTML transaction visible. What is the best method for handling this type of scenario? This is a 7.0 portal connecting to ECC 5.0 on the back-end.
Thanks,
Bert

Hello Bert,
I would have implemented your scenario in following way:
1. Create a transaction iView in portal using SAP GUI for HTML.
2. In the web dynpro application, you have multiple choices to use the transaction iview created in above step.
 a. Use a IFrame UI element giving it the portal based url for the transaction iview
 b. Use POrtal Navigation API to navigate to the transaction iview.
 WDPortalNavigation.navigateAbsolute(
 "ROLES://portal_content/com.sap.PageNavigationProject/com.sap.TargetPage",
 WDPortalNavigationMode.SHOW_INPLACE,
 (String) null,
 (String) null,
 WDPortalNavigationHistoryMode.NO_DUPLICATIONS,
 (String) null,
 (String) null,
 [<url params>]
Hope this helps you.
Regards,
Prasanna

New SAP GUI Patches

Hi,
a couple of new patches were posted to ftp.sap.com :
- SAP GUI for Windows 6.40 Patch 15
- SAP BW 3.5 AddOn Patch 7
- SAP GUI 6.40 - ECL Viewer Patch 2
Best regards,
Christian

Hi John,
short update: I talked to the service market place team, and unfortunately the software corner is not a standard SMP site, so the nice features you know from other pages are not available, and won't be in the near future.
I will post news about new patches here, but as mentioned this is not part of the official workflow and may not always happen, for example when I'm on vacation
Best regards,
Christian

Upload a new SAP GUI Logo.

Hi,
I'm trying uploading a Logo of a company in SAP GUI but without success.
I follow the following link to perform that:
http://www.sap-img.com/basis/changing-the-sapgui-logo-on-the-right-hand-side.htm
It seems the clients are locked.
When I execute trx SMW0, settings, maintain MIME types, I cannot see the "create" button.
How do I have to configure the client?
Best regards

Hi,
for performing that activity in SPRO, SAP NetWeaver, SAP Web Application Server, System administration, Change & Transport System, Configure clients the following parameter must be set as follows:
- Changes and Transports for Client-Specific Objects = different from No changes allowed;
- Cross-Client Object Changes = Changes to Repository and cross-client customizing allowed;
- Protection: Client Copier and Comparison Tool = Protection Level 0: No restriction.
Best regards

Display Software Required with New Mac/OS?

I just wondered whether the 30" display software that comes on CD with the screen (dated 2005) is required on a new 8 core MacPro with OS 10.4.9, or is the software support built-in to the system now?

Any 2005 software would be from before Apple started using Intel chips, so wouldn't be for the Mac Pro, anyway. Just use the software included in OSX.

SAP Gui 730 issue with crobu theme

Hello Frineds, Our developer team is facing some strange issue. They are able using corbu theme in SAP GUI 720. but after the new SAP GUI 730 implementaion, they are not able to use this theme. Checked all the notes etc, but its not clear on themes part. Any one faced this kind of issue or any suggestions. Thanks in advance. Regards Munish

Hi Munish,
Can you raise this in ABAP community ?
Also, to help you further can you drill down to some more relevant information ?
As far as one can understand, it's a rendering problem with SAP GUI 730.
This can also be compatibility issue with your kernel and application.
I would suggested you to check all above options.
Regards,
Divyanshu

Help with SAP GUI on Trial VMWare Edition

I currently have a trial version of NetWeaver installed (SAP NetWeaver 7.0.1 Java + ABAP Trial VMWare Edition), but having problems getting the GUI to work. The VM is using GNOME 2.12.2.
I'm currently having trouble with SAP GUI. According to SAP help, a requirement to run SAP GUI for HTML is Windows NT 4.0. Since I'm using GNOME, I tried to get the Java version to work.
When I try to launch SAP GUI, it gives me the following error:
http://i.imgur.com/0ZBVI.png
I wasn't able to troubleshoot the error, so I'm in the process of uninstalling this version of SAP GUI, and try installing again. However, I'm having trouble performing the uninstall. I did some reading, and it says to either run the SAPsweep.exe utility or NWSapSetup.exe. But I can't find either of them on my machine (tried doing a system search, no luck).
I found this thread to be helpful: Re: sapsweep.exe for SAPGUI 7.10 ?, but I'm not running on Windows.
Thanks in advance for any input

Hello Anoop.
The error occurs because you have selected OLE DB for OLAP Provider in the Business Explorer selection.
You can tell this from the following line in your sapsetup
00:43:58 NwSapsAtlC 1W Marking package SAPGUI_7.30 ({57F4A687-AE41-4BEA-9553-F852C36F8C1E}) as disabled: selected node OLE DB for OLAP Provider ({5390360A-98D9-4377-BD41-9A147392D000}) has failing condition.
Since you don't have Office installed,you cannot use the Business Explorer modules.
Run the installation again only selecting the components you require.
Jude

An issue using the COM components supplied with SAP GUI 6.2 or 6.4

We are having an issue using the COM components supplied with SAP GUI 6.2 or 6.4. We used to have SAP 4.6c and now we have 5.0. When we were on 4.6c, we used these COM components to logon and execute RFC calls and we had much success. Now that we are on 5.0, we cant seem to instance any SAP functions that have something to do with SAP Workflow. We have experienced this problem when using VB6 or .NET, but our existing code that always worked is in VB 6.0.
SAP Components used:
o SAP Logon Control
o SAP Function Control
o Librfc32.dll
o Other supporting C DLLs and/or COM object supplied with the SAP GUI installation.
For example, if we want to call the RFC ARCHIV_CONNECTION_INSERT, this code fails in VB6 when the Set objworkflow = objFuncCtrl.Add(strFunction) line of code executes. Instead of returning an instance of the object ARCHIV_CONNECTION_INSERT function, no object is created. In 6.2, SAP raises no errors, but the object we are trying to create is still Nothing. If we use 6.4, SAP raises an error SAP data type not supported via a message box and then the object is still = Nothing. Interestingly enough, the 6.2 GUI COM controls dont display the error dialog. The message box that is shown comes from the SAP Function COM Object "SAP.Functions" (wdtfuncs.ocx).
Now, what is interesting is if we use the same code to call a standard function or custom function that doesnt have anything to do with SAP Workflow, then the code works fine. Again, all of our code used to work just fine on an SAP 4.6 system.
Here is the code that fails:
 'SAP Logon control - object for creating connections to an SAP system
 Dim objSAPLogonCtrl As Object
 'SAP connection object
 Dim objConnection As Object
 'Object that will represent the SAP function called
 Dim objSAP As Object
 'SAP function control object - object factory for creating other SAP function objects
 Dim objFuncCtrl As Object
 'Create instance of an SAP logon conrol
 Set objSAPLogonCtrl = CreateObject("SAP.Logoncontrol.1")
 'Create a connection object
 Set objConnection = objSAPLogonCtrl.NewConnection
 'Define connecion parameters
 objConnection.ApplicationServer = "sapvm"
 objConnection.SystemNumber = "00"
 objConnection.Client = "800"
 objConnection.User = "iissap"
 objConnection.Password = "tstadm"
 objConnection.Language = "E"
 objConnection.TraceLevel = 10
 'call the logon method of the connection object
 If objConnection.Logon(0, True) = False Then
 MsgBox Error
 Exit Sub
 End If
 'Create an instance of the SAP Function control object
 Set objFuncCtrl = CreateObject("SAP.Functions")
 'Set the function control connection object
 Set objFuncCtrl.Connection = objConnection
 'Function name to be generated and called
 Dim strFunction As String
 strFunction = "ARCHIV_PROCESS_RFCINPUT"
 'Create an instance of the function defined in strFunction
 Set objworkflow = objFuncCtrl.Add(strFunction)
 If objworkflow Is Nothing Then
 MsgBox "Could not create object " & strFunction
 Else
 MsgBox strFunction & " object created."
 End If
If anyone has seen anything like this or has any ideas, please help!
Mike and Hameed


Hi,
documentation on the Scripting API is available at ftp://ftp.sap.com/pub/sapgui/win/640/scripting/docs/
This API is a replacement of the existing, obsolete COM interfaces.
Best regards,
Christian

Writing files in your local hard disk with SAP GUI for HTML

Hello SAP Experts
We have a problem with the SAP GUI for HTML, we create a program in ABAP that writes a file into your local machine, and it works just fine when we test it directly in the SAP GUI for Windows, but if we use the SAP GUI for HTML implementend in a SAP Portal 7.0 the same program doesn't run, it just freeze in the moment that the program must create the file, so my question is if it's possible to use that functionality in the GUI HTML, or do you have another suggestion???
Thanks a lot,
Ricardo Pineda

Thank you experts,
Your answers have been really helpfull, we have to try another method, by Studio Program or ABAP code, unfortunely we have to implement this in so many computers, so is impossible to configure one by one.
Thanks to both, and have a nice 2009!
Ricardo Pineda
Edited by: Ricardo Pineda on Jan 13, 2009 2:09 AM

ALV GRID and Integrated ITS 7 (SAP GUI for HTML) - dissapears on reload

Hi All,
We have a custom report that uses an ALV grid to display information to the user. Within this grid, there are fields that are display only and fields that are editable. Also, the grid is wider than the screen's width. It works fine in ECC. It also worked fine when we were using ITS 6.4.
We have recently upgraded to ITS 7. Now when we run the report using a Transaction iView (in EP 7) or the Webgui service (SAP GUI for HTML), if a field that is editable has focus when an event is triggered that reloads the grid, the screen becomes blank. So, you can click the Save button and the screen goes blank, also, there are date fields in the grid and if you choose a new date, the grid reloads and the screen becomes blank.
We have found that when the screen is blank, you can use the "Page Up" button on your keyboard and the last few columns of the grid will appear. As if the entire grid has moved off-screen to the left.
If you click onto a non-editable field and refresh or save, the grid returns to its normal state.
We are on Basis Patch level 15.
Does anyone have any ideas on how to fix this?
Also, does anyone know of a standard SAP transaction we can call from the Webgui that would have a similar setup...with an ALV grid containing editable and non-editable fields? We would like to rule out any errors in the report itself. Since it worked before we upgraded and it works fine in ECC. This would be a really big help too.
Thank you so much!
-Kevin

Hi,
Thanks Raymond, I have seen Note 314568. I could not get the second link to work but I have looked at just about every Note in reference to Integrated ITS 7 and Tables or ALV Grids and there are very many, so it would appear that SAP has had a hard time with implementing this control, but I have not seen any instance that matches the problem we are having.
Unfortunately, SAP will not investigate this unless we can provide a standard Transaction that exhibits the same behavior.
If anyone knows of a standard SAP Transaction that displays an ALV Grid that is wider than the screen (requiring a horizontal scroll bar) and with editable and non-editable fields, that would be fantastic. If we can test against that, then we would know for sure if this is a problem with ITS / SAP GUI for HTML, or if there is an issue with this specific report.
Thanks!
-Kevin

SAP GUI 730 PL8 Installation Problems

Hi all!
We are facing a problem with the following software product:
Information NwSapSetupAdmin.exe:
SAP GUI for Windows 7.30 (Compilation 3)
Component ID: 1460620d-c8bc-44c2-86ec-e632e0986b01
Version: 27625
Latest Patch Level: 8
SAP Automatic Workstation Update
Component ID: 40d11884-3906-4e67-8a96-91035ca09814
Version: 900.42
Latest Patch Level: 45 Version 9.0.45.0
Information SAP Logon:
Release: 730 Final Release
Dateiversion: 7300.3.8.1084
Build: 1478436
Patch-Level: 8
Within the SAP GUI Installation (NwSapSetup.log) the following error occurs:
16:25:13 NwSapsAtlC 1 Executing script action...
16:25:13 NwSapsAtlC 1 Script-action: Checking reboot condition.
16:25:13 NwSapsAtlC 1 Script-action: NwEngine.Context.Reboot = 1
16:25:13 NwSapsAtlC 1E Microsoft VBScript runtime error: Error message: Unknown error 0x800A01B6. Error code 0x800a01b6.
 Object doesn't support this property or method: 'NwEngine.Context.Args' (Line 4, Col. 5)
 The setup script contains the error listed above. Please contact your system administrator and provide this information, for example by sending him a screenshot of this message box (Press Alt+PrtScrn to create the screenshot and copy it to the clipboard).
16:25:13 NwSapsAtlC 1E Failed to run script:
 ----+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8
 1: NwEngine.Context.Log.Write "Script-action: Checking reboot condition."
 2: NwEngine.Context.Log.Write "Script-action: NwEngine.Context.Reboot = " & NwEngine.Context.Reboot
 3: If NwEngine.Context.Reboot = 1 Then
 4: If NwEngine.Context.Args("SuppressReboot") <> "" Then
 5: NwEngine.Context.Reboot = 0 'Setting Flag for no Reboot
 6: NwEngine.Context.Log.WriteWarning "Script-action: Reboot suppressed by the user. NwEngine.Context.Reboot = " & NwEngine.Context.Reboot
 7: ElseIf NwEngine.Context.Args("DelayReboot") <> "" Then
 8: NwEngine.Context.Reboot = 1 'Setting Flag for delayed Reboot
 9: NwEngine.Context.Log.WriteWarning "Script-action: Reboot delayed by the user. NwEngine.Context.Reboot = " & NwEngine.Context.Reboot
 10: Else
 11: NwEngine.Context.Reboot = 2 'Setting Flag for immediate Reboot
 12: NwEngine.Context.Log.Write "Script-action: Enforce immediate reboot."
 13: End If
 14: End If
 ----+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8
 Error message: Unknown error 0x80020101. Error code 0x80020101.
16:25:13 NwSapsAtlC 1E Failed to parse script. Error message: Unknown error 0x80020101. Error code 0x80020101.
16:25:13 NwSapsAtlC 1E While processing Component '$MS System Files' with Id '{F270A214-3AD3-4235-9C74-F4D323B54976}' 1 error(s) have been registered.
16:25:13 NwSapsAtlC 1 CompAct.:Installed Component '$MS System Files' with Id '{F270A214-3AD3-4235-9C74-F4D323B54976}'
With this the NwSapSetup.log ends with:
16:26:23 NwSapSetup 1 Return-Code: 145
In the next logical step within our environment a uninstallation of the SAP GUI gets started:
 Commandline:
'"C:\Program Files (x86)\SAP\SapSetup\Setup\NWSapSetup.exe" /Silent /Uninstall /Package=PEACY'
This operation gets done with:
12:35:47 NwSapSetup 1 Return-Code: 0
After that the installation of the SAP GUI gets started again with:
 Commandline: '"C:\peacy.sys\source\SAPGUI730PL8\source\setup\NwSapSetup.exe" /noDLG /norestart /Package=PEACY'
Now the Installation gets done with:
12:52:12 NwSapSetup 1 Return-Code: 0
Every first installation of SAP GUI 7.30 PL8 is affected. This is a cross-platform issue (Windows 7 and Windows 8.1). If there was our older package version (SAP GUI 7.30 PL4) installed, the installation of SAP GUI 7.30 PL8 gets done without problems.
Every new client with the SAP GUI 7.30 PL8 assigned or the re-installation of it, and every first installation of the package on a client without SAP GUI leads to the mentioned issue - package gets installed with the mentioned error, afterwards the uninstallation gets started by our environment and finally the installation gets done with the second try. This is not a practicable method for our support staff.
Are there any hints how to resolve this issue. (A upgrade to the newest patch level of SAP GUI is not a practicable solution)
Thanks in advance!
Best regards
Christian

Hello Christian,
For older releases of the SAP GUI client a good approach is to create package for uninstalling old SAP GUI. Depending on the state of the old SAP GUI's you're upgrading those may not be "clean" enough to warrant upgrading in place.
The older GUI's have component's no longer provided with the newer releases so most recommendations are to uninstall completely an do a fresh installation.
I credit Matt Fraser for this information and suggest reading his documentation. The last 4 articles are germane to you're situation. I hope this helps you.
http://scn.sap.com/thread/3620515
http://scn.sap.com/docs/DOC-55477
http://scn.sap.com/docs/DOC-55574
http://scn.sap.com/docs/DOC-55575
http://scn.sap.com/docs/DOC-55633
http://scn.sap.com/docs/DOC-55634
http://scn.sap.com/docs/DOC-55674
Cheers,
Dan Mead

Export SAP GUI Logon system properites to another laptop

Hi, SDN Fellows.
I want to run SAP GUI logon systems in another laptop. After installing a new SAP GUI client. Instead of re-add the logon system properties, is that a way I can export and import from another laptop? Say I have 10 logon system properties (some with application server and some with logon groups), how do I pick the 8 of 10, and export to another SAP GUI in another laptop?
Thanks,
Kent

Hello Kent,
for SAP GUI for Windows 6.20 or 6.40, please have a look at [SAP note 512040|https://service.sap.com/sap/support/notes/512040], for SAP GUI for Windows 7.10 refer to [SAP note 1035560|https://service.sap.com/sap/support/notes/1035560] and for SAP GUI for Java please read chapter 7 of the manual included in the SAP GUI for Java installation.
Best regards
Rolf-Martin

ANN: SAP GUI for Java 7.00 rev 5 available for download

Hi all,
SAP GUI for Java 7.00 rev 5 is now available at http://service.sap.com/sapgui-java.
In case you are not registered on service.sap.com, you can alternatively download it from ftp://ftp.sap.com/pub/sapgui/java/700r5.
This revision solves issues in the dropdown listbox, grid and table control. Also an issue with FileDownload is fixed. For more information, please refer to the release notes.
<a href="https://service.sap.com/sap/support/notes/954572">Note 954572</a> lists the supported platforms.
Best regards
Rolf-Martin

hi Mr.Rolf-Martin,
this is kumar writing in regards with the sap gui for java 7.00 rev 4.....i found ur link very helpful ....thanks for the link...and i have a problem in creating a new connectioin ....i have gone thru some of the forum replies and pdf's ....but i could not set up the new connection ....
can u plz help me in creating a new connection .....
the rev4.jar file was successfully installed.....
and whats are the next steps .....
any help appriciated thanks
regards
kumar

Bandwidth required with new SAP GUi

Similar Messages

Maybe you are looking for