Bandwidth requirement for accessing SAP via SAPGUI

Hi,
I have ECC 6.0 system on windows. I need connectivity from remote locations to central office where SAP server resides.
How to calculate bandwidth requirement for accessing SAP via SAPGUI from Remote locations?
Regards,
Nirav.

Hello,
please refer to the [Front-end Network Requirements for SAP Solutions|http://service.sap.com/~sapidb/011000358700003943521999E] document.
(The navigation path on Service MarketPlace would be http://service.sap.com/sizing > Sizing Guidelines > Solutions & Platforms, then search for the title above).
Best regards
Rolf-Martin

Similar Messages

  • Bandwidth Requirement for accessing SAP

    Hi,
    I have ECC 6.0 system on windows. I need connectivity from remote locations to central office where SAP server resides.
    How to caculate bandwidth requirement for accessing SAP via SAPGUI from Remote locations?
    Regards,
    Nirav.

    Hi,
    Please check the link below
    https://fortress.wa.gov/dop/hrms/techinfo/NetworkReq.htm
    Hope it helps you.
    Rgds,
    Suman

  • Bandwidth required with new SAP GUi

    Hey all,
    I am trying to find out what is the bandwidth required for each user for each session for SAP GUI 7.0. With the old SAP GUI 620, we had 3 KB per user per session required.
    Thanks in advance.
    Laura

    Hi Laura,
    there shouldn't be very much difference. The [Sizing Guide "Front-End network requirements for SAP Business Solutions"|http://service.sap.com/~sapidb/011000358700003943521999E] doesn't mention any version dependent values.
    Regards,
    Peter

  • Bandwidth required for Peoplesoft

    Hi,
    We are doing sizing in terms of the bandwidth required for peoplesoft v9.0. The server is going to be based in a central location. It is my understanding that Self service and GP would be the most bandwidth consuming modules. GPl would be run from a central location and all employees who will be spread over different geographical locations would have access to Self Service. Do you have any idea of what the minimum bandwidth required would be in this case? I understand that Peoplesoft is PIA but there will be some minimum bandwidth requirement for good performance. I would appreciate any input in this regard, even rough estimates or past experiences will be really helpful. Thanks

    I don't have any solid tcp/ip numbers for you. Most of the network traffic is between the web, app, and database servers. If your users can browse the web (MSN, Google, etc) from their location without complaints, they will be able to use PeopleSoft. If you turn on gzip compression in your web profile, that will help a lot. Most of the PeopleSoft JavaScript, CSS, and images are stored as external files so they benefit from client side browser cache. Once a user loads a page, all that will travel back and forth is the HTML that comprises the page itself. Yes, the HTML is a bit bloated as it is based on the HTML design model from several years ago (lots of tables for formatting). A FieldChange, button click, or save will reload the entire page.
    Are your users going to be using 56k modems or something better? Really, latency is probably more important than bandwidth in this case.
    PeopleSoft doesn't maintain a persistent connection between the web server and browser, so I'm not sure that distance is really an issue.
    Just to give you some rough numbers, with JavaScripts, etc in my browser cache, the contents of the Timesheet page is 39k without gzip compression and 6k with gzip compression. So, with gzip compression turned on, you should get much better use of your bandwidth.

  • Anybody know whats the system requirement for installing SAP in my home pc.

    anybody know whats the system requirement for installing SAP in my home pc. I have p4 processor with 1 GB Ram. I can increase the ram to 2 GB.  Please help

    Hi friend,
    Check your RAM , even for 4.7 version you need 1gb ram for better speed, 80gb sap only will occupy, for other storage you need to maintain another hard disk, or add new hard disk with your existing hard disk to make it 120 or 160, if its 6.0 then sap only occupies 6.0, then you need some more space for additional data, you cant browse internet on sap-server (which you installed), for internet and general purposed you need to seperate the hard disk, in case of 6.0 and you want to use both internet and sap you need to have 240-300GB HDD & 2GB ram, inter core2duo processor, 3.15ghz processor etc...and if its 4.7sap and other Operating system you need to have minum 160GB hard disk and 1gb RAM for better speed and access...
    clarify if any doubts are there, system performance improves with good RAM memory...
    reward if helps
    krishna

  • What step is required for open sap in browser (internet explorer)

    Hi All,
    What is configuration is required for open sap in internet explorer,
    i want to open sap gui in browser, for that what customizing is
    required?.
    i have ecc 6.0.
    Thanks & Regards
    Arpit

    Hello. This blog are for 640 release, but the main steps are same, activating in SICF , publishing in SE80 , check ICM, after test service in same SICF -->
    sap/bc/gui/sap/its/WEBGUI.
    Running your first  ITS WebGUI application in SAP NetWeaver 04 ABAP Edition - NSP
    Regards.

  • SAP components required for implemeting SAP SRM MDM

    Hi all,
    Plz let me know , the SAP components required for implemeting SAP SRM MDM , for the following points:
    · Internal catalogs hosted and maintained by buyer?
    · Internal catalogs that are maintained by vendor (vendor will be using buyer's firewall)?
    · External catalogs hosted and maintained by vendor?
    Thanks and regards
    Harish

    Hi Harish,
    The SAP components you would be needed are
    SAP MDM5.5 or 7.1
    - MDM server
    - MDIS server
    - MDSS server
    SAP SRM5.5 or 7.0
    SAP SRM-MDM business content
    WAS engine typically used for deploying sca files given by SAP for configuring MDM as catalog. Mostly was engine of SRM is used in such case.
    If you need an integration with backend system SAP PI will be used.
    refer note
    1057316 - SRM-MDM Catalog 2.0 - Installation & configuration.
    refer article for understanding mdm catalog configuration steps
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc
    Regards,
    Abhijeet
    Edited by: abhijeet more on Apr 20, 2009 1:19 PM

  • Bandwidth requirement for voice calls

    Hi All,
    Need expertise advise on the following concern about voice call.
    1. Bandwidth requirement for video call across all other endpoint(using Polycom / Lifesize end point at their end)
        a)Standard Video
        b)1K HD Video
        c)4K HD Video
    2. Plus can we determine bandwidth required for all the following below:
    a. 1 to 1 VC  end point ( Cisco TP – Cisco TP)
    b. Bridge call  ( Cisco TP to Polycom / Lifesize)
    c. 1 to 1 VC end point ( Cisco TP – Polycom / Lifesize)

    Thanks for the info Wayne. I missed out information about the endpoint.
    Client using CTS 3010.  Acoording to datasheet it says 
    11.9 Mbps (1080p, 30 fps best motion handling), 10.1 Mbps (1080p, 30 fps better motion handling), 8.8 Mbps (1080p, 30 fps good motion handling)
    6.4 Mbps (720p, 30 fps best motion handling), 4.5 Mbps (720p, 30 fps better motion handling), 3.1 Mbps (720p, 30 fps good motion handling)2
    My question is does the bandwidth required for both ways or only one way?
    And I'm aware CTS 3010 doesn't support 4K video.

  • Bandwidth required for Lync 2013 audio video call

    Hi,
    what is the required bandwidth required for  lync 2013 audio video call from out side of company network. considering users will use owa integration with exchange 2013  for audio video call. 
    i tried with lync bandwidth calculator but could not figure it out. 
    actually i have some remote site where users have connectivity of 160 kbps only.

    There are a number of variables such as call type and video resolution, but I would suggest using this table as a guide:
    http://technet.microsoft.com/en-us/library/jj688118.aspx
    For example for capacity purposes with a Lync peer-to-peer call you're looking at 57Kbps (86 with FEC)
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer" | Blog
    www.lynced.com.au | Twitter
    @imlynced

  • Total Bandwidth requirement for 720p 30fps video call to mcu 5300 and P2P call

    Hi All,
    One of customer purchased 5300 MCU VCSC and VCSE from us.
    All infra will be setup in their HQ and all endpoints are from internet. All endpoints will register to VCSE.
    customer requirements are 5 concurrent encrypted calls to MCU with 720p 30fps and point to point 10 concurrent encrypted calls.
    endpoints are cisco c series endpoints and polycom HDX endpoinds.
    They haven't  subscribe the line yet. we need to propose the minimum bandwidth requirement to customer.
    1) what is the minimum bandwidth requirements to achieve 720p 30fps encrypted call to MCU?
    2) what is the total bandwidth requirements for 5 concurrent encrypted calls to MCU?
    3) what is the total load of bandwidth requirements for 5 concurrent encrypted calls to MCU and  point to point 10 concurrent encrypted calls?
    Thanks advance for you answer!

    point to point 10 concurrent encrypted calls?
    Even with a miltisite license installed on the codec to enable the built in bridge on the endpoint, you're only going to be able to connect up to 3 sites max, the endpoint hosting the conference that has the multisite option + 3 others. You'll have to rely on the MCU to host these conferences. 

  • Hardware Requirements for the SAP SSM (pilot works) installation

    Hi All,
    Can any one please provide me with the information on hardware requirements for the SAP SSM (pilot works) installation.
    Thanks in advance.
    Anjum.

    I'm think if you can install Windows then enough RAM and Processor you have ....
    In any case "the more the better" .
    Regards.

  • What are bandwidth requirements for FaceTime?

    I can't get FaceTime to work. A 'Ping' check tells me that I've got 20Mb download and 1 Mb upload. Is this enough ?  What are bandwidth requirements for FaceTime?  If I've theoretically got a fast enough connection, then where is the restriction of bandwidth occurring?   How can I find out whether the problem is inside my computer, or on the net?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Try to make a call. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Requirements for using SAP Kernel 7.20_EXT, e.g. with ERP 6.0 EhP 6

    Dear community,
    we want to bring your attention to the important fact that upcoming SAP product releases and Enhancement Packages, like SAP ERP 6.0 EhP 6 and other members of the BS7i2011 release of SAP Business Suite 7, will use the new 7.20_EXT kernel. As we are using fully supported third party software when building this version of the 7.20 kernel, kernel 7.20_EXT allows us to safely support our customers in the upcoming years. Our updated build environments make SLES 11 Service Pack 1 and RHEL 6 the minimum Linux versions allowing you to run SAP Kernel 7.20_EXT. Please take this prerequisite into account when implementing projects that require or allow you to use SAP Kernel 7.20_EXT.
    You can find more information here:
    Note 1563102 - Linux Requirements for 7.20_EXT kernel
    SAP Product Availability Matrix for SAP NetWeaver 7.0
    Or directly access the PAM for SAP NetWeaver 7.0 EhP 3  (page 4).
    In case of questions, please feel free to contact us by a mail to linux[at]sap.com as well.
    Best Regards,
    Alexander Hass.

    Dear community,
    we want to bring your attention to the important fact that upcoming SAP product releases and Enhancement Packages, like SAP ERP 6.0 EhP 6 and other members of the BS7i2011 release of SAP Business Suite 7, will use the new 7.20_EXT kernel. As we are using fully supported third party software when building this version of the 7.20 kernel, kernel 7.20_EXT allows us to safely support our customers in the upcoming years. Our updated build environments make SLES 11 Service Pack 1 and RHEL 6 the minimum Linux versions allowing you to run SAP Kernel 7.20_EXT. Please take this prerequisite into account when implementing projects that require or allow you to use SAP Kernel 7.20_EXT.
    You can find more information here:
    Note 1563102 - Linux Requirements for 7.20_EXT kernel
    SAP Product Availability Matrix for SAP NetWeaver 7.0
    Or directly access the PAM for SAP NetWeaver 7.0 EhP 3  (page 4).
    In case of questions, please feel free to contact us by a mail to linux[at]sap.com as well.
    Best Regards,
    Alexander Hass.

  • Hardware requirement for Using SAP ECC 6.0 (IDES)

    Hi
    I am planning to buy a Laptop for Learning more about SAP modules. I am planning to install ECC 5.0 or 6.0 on the laptop.
    Can any one tell me about the minimum configration required for SAP IDES installation. If possible please let me know the processor to be used, the speed of the processor, the RAM and HDD required.
    Also Kindly let me know from where do we get the IDES licence version of ECC 5.0 / ECC 6.0
    Piyush

    Hi
    <b>Please go through the following SAP OSS Notes -></b>
    Note 822208 - IDES mySAP ERP ECC 5.0 SR1
    Note 982228 - Installation KJEPS 601 on SAP ECC 6.0
    Note 1070948 - SAP Best Practices Baseline Package PL based on ECC 6.0
    Note 748977 - INST: mySAP ERP 04 ABAP on iSeries
    Note 855498 - Installation Prerequisite Checker
    Note 1012486 - Important Information on upgrading ERP-Systems in HA-Setups
    Note 855897 - SAP Business Suite 2005 Installation:IBM eServer iSeries
    Note 989368 - Upgrade to SAP ECC 600 with VIRSA 400_700
    Note 1034686 - Installation: Leasing Strategic Improvements on ECC 6.0
    <u>Please Contact local SAP support from this link below</u>
    https://websmp209.sap-ag.de/~form/handler?_APP=00200682500000002025&_EVENT=DISPLAY&SELAREA=501100035870000000694#
    Do let me know.
    Regards
    - Atul

  • Hardware Requirement for the SAP E-Sourcing 5.0

    Hi,
    Can any one tell me please about hardware requirement for SAP E-Sourcing 5.0.
    Thanks
    Sanjay Rai

    Hi Sanjay,
    May be this forum is not relevent.Hardware requirement mainly may depends on number of user licences which your company looking.also based on number applications which u r going to install....
    Rgds,
    Gadde.

Maybe you are looking for