Bandwidth Shaping for limiting Video and Audio Streaming

Hi,
How do I setup this on the SRP527W?
I already block most of the video stuff on the internet.
But I want to make this one more step.
Thanks   
Best Regards,
Mr. Simon Yee
Document Control
Budi Feed Sdn. Bhd.(827186-P)
Lot 11940, Jalan Perajurit 1,
Off Jalan Perajurit,
Kampung Tengah,
Telok Gong, 
42000 Port Klang,
Selangor Darul Ehsan.
Tel :-- 603-3134 1081
Notice of Confidentiality:
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material.  Any review, re-transmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited.  If you received this in error, please contact the sender immediately by return electronic transmission and then immediately delete this transmission, including all attachments, without copying, distributing or disclosing same.

Hello Mr Yee,
I found a link from the cisco site where you could find the configuration steps for Traffic Shaping.
http://www.cisco.com/en/US/docs/ios/12_0/qos/configuration/guide/qcgts.html
hope you find this answer useful, if it was satisfactory  for you, please mark the question as Answered.
Thank you

Similar Messages

  • Multiplex a mpeg2 video and audio stream recorded via a satellite receiver

    I would like to know if upgrading to QuickTime pro and/or adding the QuickTime MPEG2 add-on would allow me to multiplex a mpeg2 video and audio stream recorded via a European satellite receiver (like the Aston Xena 1800 HDU) in order to make movies that can later on be converted to be viewed on my iPod.
    Mac Mini   Mac OS X (10.4.9)  

    No. The MPEG-2 component is to play MPEG-2 not encode it.
    Use Toast. I assume you have separate audio and video transport streams, if they are named identically (1.m2v and 1.m2a) Toast will detect that and multiplex into a new MPEG-2. If not , add the video stream to Toast, which will ask for an audio stream to go with it. Either way it makes an MPEG-2 anew.
    Of course you cannot use MPEG-2 in iPod so rip that DVD (Toast can make just an image and you can mount that) to get the VOB file, then use MPEG Streamclip or iSquint to convert the muxed MPEG-2 file to MP4 suitable for iPod.
    Note I am very curious - are you sure this device delivers separate audio and video streams? Not a proper muxed MPEG-2 file? If the latter then just MPEG Streamclip or iSquint will do.

  • Sync of Video and Audio streams

    I got a main project to make a video conferance system. And i'm not sure how to sync the video and Audio streams. (Audio need to have higher priority than video)
    Video is all moust real-time but audio is around 0.5 sec delay at the fastest.
    I realy need to find out how to sync them since its one of my main subjects in the project.
    So if anyone know how to, plz let me know.

    Hello,
    I try to implement a videoconference in Java with JMF. At the reception, audio and vid�o aren't synchronizing. I'm looking for a solution to resolve this problem because i think in this kind of application, audio and video tracks must be synchronized. I'd like to know when and how can i do the synchronization : at the capture, before transmission, or at the reception ?

  • Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

    Hello All...
    Back after a brief absence, things look a little bit different.
    I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
    Thanks!
    PowerMac G5 1.8 Dual   Mac OS X (10.4.3)  
    Message was edited by: Dan Foley

    Thank you for the replies.  Everyone was correct about the jack, interface, and phasing problems.  I have been unplugging my motu audio interface and then using headphones at work.  I have not changed any detailed audio output settings in logic.  When I read that the jack might be a problem I tried switching headphones.  This actually helped.  I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems.  I can use these headphones with other devices but not the mac.  I have to use ipod ear buds and the phasing seems fixed.  Hopefully this information is helpful to someone else. 
    If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. 

  • My video and audio streaming always break-up (or I have delays)

    When I watch a video from MSNBC thevideo and audio streaming always delays. Any idea what the problem is or how I can fix it.

    Premiere does not work well with variable frame rate video which, I expect, the ipad produces, You might have to convert the footage before you import it into Premiere. Do a forum search for variable frame rate, there are a lot of posts.

  • I need to connect Lightning to RCA componet for both Video and Audio

    I have an Ipad  2nd generation and use a 30 pin to RCA Componet adapter from rockfish and its work great for video and audio.  I now have a IPad mini 5 gen and I bought a lightning to 30 pin adapter and tried to use my Ipad mini to watch video and audio.  Audio works but video does not. Does anyone have a solution for this for the new Ipad Mini and iphone 5s.

    Nope.
    There is no lightning to RCA.
    The 30 pin adaptor clearly states it does not support video out.

  • Sound for recording video and audio not working

    I have tried everything to get the sound to work.  I have reinstalled the audio driver.  When I go to soundrecording.exe to see if I can record sound it gives me a message "An audio recording device cannot be found."  Please help this is driving me crazy.

    well, since people can hear you on a call, it's not a hardware problem with the microphone.
    It appears to be something wrong with your recording apps -- the camera (in the case of video) and whatsapp.
    First attempt would be to:
    a) install another camera app with video capability and see if IT will record audio. and
    b) uninstall and reinstall whatsapp to see if that fixes the problem.
    If that doesn't work, to a backup, then try a hard reset and re-install the apps one by one, confirming that recording works after each install.
    /drt

  • What's the best mouse for heavy video and audio editing?

    I do an enormous of audio and video editing.  I'm finally feeling the strange sensations of tightness in my right hand (being right-handed).  I realize now that the typical mouse design is bad for heavy precision work.  When I use my son's Mac flat mouse, I notice that my hand lies flat and somewhat rested while working.
    Can anyone recommend a great flat or other mouse for my PC?

    I guess it's all a matter of personal preference.
    When I got my Mac, the first thing I did was replace that God-awful Mighty Mouse with a nice, generic two-button roller mouse.
    They all work about the same. I guess it's mostly about your personal ergonomic comfort.

  • Building FLV Player for FMS Video and Audio

    Hi All,
    Am new to flash development. I would need all of your
    knowledge to build an application for FLV Streaming.
    I need to write a FLV player which dynamically picks the file
    from FMS Server by taking the arguments password to the
    movie/player.
    Please let me know how do i go about it.
    Thanks in Advance
    Mady

    arunbe,
    I read the live docs information about NetStream.onMetaData,
    and this tells me that it is possible that I might get some
    information about an audio codec, but it doesn't really help all
    that much in learning if there is a way to tell if there is an
    audio track present at all. Does such a possibility exist?
    C

  • IPhone video and audio streaming over GSM and 3G networks?

    Is the iPhone 3G capable of streaming live audio and video from the iPhone 3G to an Xserve to a webpage, through GSM and 3G connections ?

    The iPhone camera does not support video at this time.

  • HT201066 Record video and audio stream

    There doesn't appear to be any way to simply record the audio going to your speakers while recording the screen, at least not without using an internal or external microphone. Is there other software that will do this?

    I can't think of an easier way since GB doesn't record video. To make the syncing easier you could do a little clapperboard effect, like clapping your hands, at the beginning of the recording. Then you should be able to align picture and sound perfectly.

  • Where do I find instructions for Youtube Video and Audio Downloader 0.3.9.1

    I need "dummies" instructions for someone who does not have much computer knowledge. I managed to download one video, but not another one. I have looked on line for instructions, and cannot find any, so I don't know if I am using the addon correctly. I do not understand the things in the "conversion tool" area. What I want to do is download videos to my computer to then convert and burn them to a dvd to play on my tv. Maybe I need a different addon, but how do I choose from all the ones that are offered?

    HI jcrmain24,
    I would recommend trying them, or viewing the reviews of the ones you are looking at. This may help.

  • Is there a fix for my video and audio stopping in the middle of playing but the video timer keeps going

    This happens on YouTube, Safari and Music videos. I just got my iPhone 5s a week a go and this has been a problem since day 1. My phone is not jailbroken. Let me know if there's any other relevant information that would be helpful in answering this question.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You may have switched on caret browsing.
    *http://kb.mozillazine.org/accessibility.browsewithcaret
    You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
    *Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
    *http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
    *http://kb.mozillazine.org/Accessibility_features_of_Firefox

  • Getting Ripped DVD Video and Audio Into Encore

    Do you have previously authored DVDs that need rework?  Do you want to add menus with greater impact and functionality?  Do you want to add some additional program or supplemental material?  Does a client want their product demo DVD to be updated to reflect the capabilities of the new and improved version, but the source files no longer exist?  Using Adobe Encore DVD and a freeware utility called DVD Decrypter (DVDD), you can accomplish this quickly and easily.
    Disclaimer: I do not support the illegal copying and/or distribution of copyrighted works.  The authors and distributors of the software I use have made it clear that they do not support illegal copying.  This guide is intended solely to assist you in ripping and copying DVD video to which you have the legal rights.  Any use of this guide to infringe the copyright of someone else’s intellectual property is prohibited.
    This guide is based on Adobe Encore DVD 1.5.1 and DVD Decrypter version 3.5.4.0.  Let’s Begin!
    Place the DVD to be ripped in your DVD drive and launch DVDD.  If you have more than one drive (e.g., a DVD-ROM and a DVD burner) make sure the one with the disc is selected in the Source dropdown list in the main program window.  Now we need to set up DVDD to extract video in a way that is “Encore friendly”.  This is the toughest part of the whole exercise.  Click on the Tools menu item and choose “Settings…”. 
    Settings
    General Tab: You can leave these set at their defaults if you like.  Personally, I specify a custom Default Destination.  I put my ripped video assets all in one place anyway, and having a default destination means I have one less thing to do when I rip a DVD.
    IFO Mode Tab: Make sure that “Select Main Movie PGC” and “Enable Stream Processing” are checked.  “Uncheck Suspect Cells” is probably a good default safety check.  If your hard disks are formatted as NTFS, set File Splitting to “None”.  I leave “Copy IFO File” checked with the default sub-items checked.  Make sure that “Patch M2V Timecode” is unchecked.  The items in the Create Additional Files section are purely optional.  The author of DVDD has been kind enough to list which programs need which files; notice that Encore DVD isn’t listed as needing any of these extra files.  I do keep the “Stream Information” box checked.  DVDD generates very informative file names, but I like to keep “Include PGC Number” under File Names checked.  Be advised you will get some lengthy file names after DVDD is finished ripping.
    Stream Processing Tab: Since we enabled stream processing in the IFO Mode tab, we need to tell DVDD how to process those streams.  To save yourself time and confusion later, check the “Convert PCM to WAV” box.  Earlier versions of Encore required a Demuxed audio stream and a Raw video stream.  Encore 1.5.1 can accept either type of video stream (Raw or Demuxed) but it does still require a Demuxed audio stream.  However, I still recommend using Raw video and Demuxed audio, if only because it seems to be somewhat faster to process in DVDD.  This workflow is also backward-compatible with earlier versions of Encore.
    So let’s set up the Stream Processing tab now.  In the Demux box, enter “0x8? 0xA? 0xC?”.  This ensures that all audio streams in the selected PGC, whether AC3, PCM or MPEG will be set to Demux.  In the Raw box, enter “0xE0”.  This ensures that the video from the selected PGC will be set to Raw.  
    Additional Notes about the Stream Processing Tab:
    1. For those of you asking the question, “What the heck is a PGC?” it’s just DVD-speak for the titles in a DVD project.  And I’m not talking about the opening or end credits, either; I’m talking about the titles that result, for example, from the timelines you create in an Encore DVD project.  There is a subtle difference between a PGC and a VTS (title set), but that's not important right now.
    2. Happily, recent versions of DVDD create a WAV file after ripping that will import directly into Encore.  Versions prior to 3.2.0.0 would create a WAV file that had to be imported to, and exported from, a sound editing program like Adobe Audition, Goldwave or SoundForge before Encore would recognize it.
    Events Tab: For convenience sake, I recommend setting “Set Program Mode” in the Startup section to “IFO”.  That way, whenever you launch DVDD, it will look familiar to you.  You may safely ignore all of the other tabs in the Settings dialog. 
    Ripping
    1.Under the Input Tab of the main program window, select the PGC you want to rip.  You can only do one at a time.
    2.Switch to the Stream Processing Tab.  Verify that Enable Stream Processing is checked.
    3.Check or uncheck any or all of the video and audio streams that are listed.  Highlight each one to verify that all audio streams are set to Demux and the video stream is set to Raw.
    4.If you didn’t select Default Destination in the General Settings Tab, then you need to tell DVDD where to put the ripped files now.
    5.Click on the big DVD-to-Disk icon.
    6.DVDD will announce, quite loudly, when it has finished.  At that point you can rename the files or import them as is into Encore.
    I hope you find this guide useful and that it helps you get the most out of your investment in Adobe Encore DVD.
    Guide © Jeff Bellune 2005

    OK, I can't tell you what we are doing, you'll have to trust me that it's for a very good cause. I'll simplify the use case as an example. If I can do the following we'll be OK:
    1) Read video/audo files from a DVD that we created
    2) Open these files with the QuickTime Player, click on Export to Apple TV to create an output file.
    I'd rather not do an interim conversion of the video data (like use a 3rd party app to convert to mp4 first and then read into QT, but I'm considering a conversion to DV) because that could seriously hurt the apps effectiveness. I also can't use another app (MPEG Streamclip, HandBrake, VisualHub, etc.) to do the conversion.

  • Video and audio choking

    Ever since I upgraded to Moutian Lion I'm having an issue where my video and audio streams are choking while doing anything. For example, I'll be streaming spotify and working on a photoshop file (below 20mb file size), and the audio will start cutting out or sounding like an old cassette tape getting eaten by the tape deck. Can anyone lend a hand?
    Thanks!

    One other thing to note. It's not my internet connection. It happnes when I'm playing iTunes files that are saved locally. Again, when my second cinema display is plugged into thunderbolt, I get the latency in the playback (both video and audio) while doing even basic tasks like internet browsing. If I unplug the display the problem goes away. I'm fully up to date on all OS updates and Firmware updates.

Maybe you are looking for