Bandwidth usage details in SCCM 2007 during software update deployment

Hi All,
How can we know or check that how much bandwidth has been used during software update activity in SCCM 2007

use performance monitor / performance counter perhaps
http://social.technet.microsoft.com/Forums/en-US/473bf861-6d81-4a3b-b603-2dfdbfa80c62/is-there-a-perfmon-counter-for-network-utilization?forum=perfmon
---Pat

Similar Messages

SCCM 2007 R3 Software Updates Sync : 6703 WSUS server not configured

Hi,
We run SCCM 2007 R3 in native mode (Software Update Point and WSUS both reside on SCCM site server). We're having issues running Software Updates Synchronization which have previously worked fine. In SMS_WSUS_Control_Manager the errors appear as follows
MessageID:6703
SMS WSUS Synchronization failed.
Message: WSUS server not configured.
Source: CWSyncMgr::DoSync.
The operating system reported error 2147500037: Unspecified error
I've followed the suggested fixes in
http://technet.micro...y/bb735874.aspx but still we have an issue.
If I open the WSUS console directly and run a manual synchronization from Microsoft this completes successfully. However, I presume this will not be using SSL which is what SCCM will want to use in native mode. I've checked the bindings in IIS on WSUS Administration
site to confirm that the certificate hasn't expired.
Any ideas what else I can try?
Cheers,
Paul

wsyncmgr.log repeatedly contains the following
Performing sync on retry schedule SMS_WSUS_SYNC_MANAGER 13/10/2013 14:02:11 612 (0x0264)
STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=CCPSCCM02 SITE=WES PID=8084 TID=612 GMTDATE=Sun Oct 13 13:02:11.288 2013 ISTR0="" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 13/10/2013
14:02:11 612 (0x0264)
Sync failed: WSUS server not configured. Source: CWSyncMgr::DoSync SMS_WSUS_SYNC_MANAGER 13/10/2013 14:07:11 612 (0x0264)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=CCPSCCM02 SITE=WES PID=8084 TID=612 GMTDATE=Sun Oct 13 13:07:11.284 2013 ISTR0="CWSyncMgr::DoSync" ISTR1="WSUS server not configured" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6=""
ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 13/10/2013 14:07:11 612 (0x0264)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER 13/10/2013 14:07:11 612 (0x0264)
Sync time: 0d00h05m00s SMS_WSUS_SYNC_MANAGER 13/10/2013 14:07:11 612 (0x0264)

My new ipad froze during software update thru itunes. The normal reset tructions do not work and itunes on my pc no longer recognizes my ipad. how do i get past this issue?

My new IPAD froze during software update thru itunes on my winows PC. The normal reset instructions holding the home and power buttons do not work. Itunes no longer recognizes my IPAD. What can i do?

See here -
Recovery Mode
http://support.apple.com/kb/HT1808
iPad not showing up in iTunes on a PC
http://www.apple.com/support/ipad/assistant/itunes/
iPad not showing up on a Mac
http://support.apple.com/kb/TS1591

My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

HT202157 My Apple TV blocked during software update. What should I do?

My Apple TV blocked during software update. What should I do?

You can't do much else besides pull the plug. If it causes further problems you should be able to restore as below:
Get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
On the other hand you may be able to simply start the update again. If however the update continues to fail, you should try the restore routine above.

Error message during software updates

I am constantly receiveing the following error message during software updates. This time it happened with an HP printer update, but it has happened with iTunes and Safari as well. Does anyone know what I need to do?
The system extension “/System/Library/Extensions/GeneIOUSBCFSubclass.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update
Thanks!

Try using Help > Updates from one of your CS6 applications.
When you return home, you might try uninstalling CS6 and reinstalling it again. It sounds like some stuff may have become corrupted.

[SCCM 2012 R2] How SCCM 2012 handles Software Update Revisions?

Hi All,
There are a lot of questions regarding how SCCM 2012 handles Software Update Revisions.
Does anyone know what happened if:
Windows update publish some update with revision #1
Same update downloaded and deployed via SCCM 2012
Windows update publish same update with revision #2 or any newer revision
What is happening with SCCM and already deployed and downloaded revision? How should I know what revision is really on my distribution points?
Thank you in advance.
Regards,

In WSUS Revision History is very simple:
Where I can find revision history in SCCM??? (please do not mention dates):
Possible scenario in SCCM:
Windows update publish revision #1 for one update
SCCM Download and Deploy same update and revision #1
Windows update change revision to #2
What SCCM does after this scenario?
Auto update Distribution Points with new revision of already deployed and downloaded update?
Clearly state in SCCM Console that there is new revision of already deployed and downloaded update and waiting for admin to act?
Just update the revision in SCCM Console and leave old revision od Distribution Points?????

Ipad stuck at apple during software update

my iPad is stuck at apple logo during software update … what to do i have important date stored in it

If the reset doesn't work, you will have to force iPad into Recovery Mode.
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

My iphone froze during software update. now my itunes does not recognize it, nor would it reset it. I only see pic of usb cable asking me to connect to itunes. i removed and reinstalled itunes already.

my iphone 4s froze during software update. I have removed and reinstalled itunes, but still will not recognize it nor reset it. In the screen I can only see a pic of the usb cable indicating me to conect with itunes. have done it several times but still does not solve my issue. I cannot use the device at all. any suggestions?

Unable to Update or Restore
http://support.apple.com/kb/HT1808

LOST MY CONTACT DURING SOFTWARE UPDATE

I LOST MY CONTACTS DURING SOFTWARE UPDATE A WEEK AGO , TRIED TO RESTORE FROM MY LAST BACK UP HELD ON MAY 16, BUT FAILED , AM EVEN SURE I'V SELECTED ALL DATA BACKUP FOR ANY OF MY PREVIOUS BACKUP , TRIED TO RESTORE FROM ANY BUT FAILED , TRIED THE GMAIL CONTACTS ALSO FAILED , WONDERING WHERE MY CONTACTS I'VE SAVED FOR MORE THEN 10 YEARS ARE GONE ....AM TOTTALY DISSAPOINTED SINCE AM A BLACKBERRY USER SINCE 5 YEARS , ALWAYS SUPPORTED BLACKBERRY AGAINST IPHONE USERS , ALL MY FREINDS ARE NO MORE USING BLACKBERRY AND SWITCHED TO IPHONE OR SAMSUNG , AM HAVING AN EMPTY BBM LIST NOW , BUT STILL SUPPORTING AND EVEN BOUGHT THE Z10 FIRST WEEK OF RELEASE , I WOULD UNDERSTAND THAT A TECHNICAL PROBLEM HAPPENED DURING THE SOFTWARE UPDATE , BUT CANT UNDERSTAND THE USELESS BACK UP I'VE ALWAYS DOING ! AND THE WORSE IS THAT LAST SOFTWARE UPDATE TURNED THE Z10 TO A WORSE MOBILE.

Hum, it is worrying...
So... your contacts seem to be on:
Gmail,
your previous backups.
-Solutions:
if all your contacts are on Gmail: copy them manually on your device,
they are a priori all in your backups: wait that Link won't be in Beta anymore, and then restore.
P.S.:
You make backups and don't register your contacts on SIM, is it possible ? Personally, I rarely register contacts on SIM. If there is a malware, it can be charged from the SIM to the Phone, this is why.

SCCM - software updates deployment.

Hi All,
i have adobe acrobat version 10.1.10 installed on my mahcine, when ever i am trying to up deploy an Adobe acrobat 10.1.13 for my machine using but its not gettin updated. Also , one thing that i have seen is even after deployment it is not showing up under
deployment package.
Can anyone help on this, Iam using shavlik higher version of SCUP with SCCM to achieve this.
Rsg,

Hi,
You could troubleshoot software updates deployment by checking logs.
UpdatesDeployment.log
UpdatesHandler.log
WUAHandler.log
%windir%\WindowsUpdate.log
For more information:https://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_SU_NAPLog
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to find who modified Software Update deployment in sccm 2012

Hi,
How to find who modified(Date & Time) software update deployment in SCCM 2012 ?

In the Console :
Monitoring / System Status / Status Message Query
Right Click : "Deployments Created, Modified, or Deleted" - Show Message and select your period.
You'll have your information there.
Benoit Lecours | Blog: System Center Dudes

Freezing up during software update

I just installed loin on one of my hard drives on my early 2008 Mac Pro. During software update the OS either crashes or freezes up.

I was eventually able to correct the problem. It first started because the phone's battery got completely discharged - thought the USB cable would keep it powered but that wasn't the case.
Anyway, tried to reboot the phone by removing and reinstalling the battery and the phone would not turn on, so this is how I understood what happened. Disconnected it from the USB cable and got the following message:
Your BlackBerry® Device Software is updated and you can safely disconnect your device.
Warnings were encountered during the loading process:
Application data could not be restored to the device. The backup data file has been saved to "file name". You can use the Desktop Software Backup/Restore tool to restore this information.
Recharged the phone, did the restore and the phone is back to life !
Cheers,
Giorgio

Throttle CPU utilization during software updates

Are there any settings to throttle CPU Utilization during software update installation on client computers? I am deploying updates to test systems currently and noticed that the CPU utilization was being pegged at 100% during the install. After
the updates installed, the system returned to normal.

Also note that ultimately, it is the Windows Update Agent that is installing the update(s) so it's not really within ConfigMgr's scope of control and would happen no matter what method you chose to use to update these systems with Windows Updates which
leads me to believe these systems have perf issues to begin with. Are they VMs?
Jason | http://blog.configmgrftw.com

Keep awake during software updates?

hello.
so I'm using ARD, and automator, ical, to schedule a software update on certain machines at certain times. so far I havnt had much luck, I think due to the fact that machines go to sleep during the update. I would prefer not to have to set my stations to stay awake all the time, but instead to stay awake during software updates/ permissions repairs, long enough to complete the task and send the confirmation back to ARD.
Thanks for any help someone may have/suggestions/etc

Use ARD to send the Unix command *systemsetup -help*
This will return a bunch of different commands for you to look at that are related to power and energy saving settings. Choose one that changes the sleep settings. Make sure you send the command as the root user
You can always read the man files for the pmset command using your Terminal app. Also check out this page too:
http://www.hmug.org/man/1/pmset.php

Bandwidth usage details in SCCM 2007 during software update deployment

Similar Messages

Maybe you are looking for