Bandwith Error ( I did search..honest)

But it came up with little to sort out my issue. I have a new C2D Macbook Pro. iChat works great everywhere accept my office. I work form home and have a home office in my back garden. We have 2 lines, both ADSL. One is a 1MB line (the office) the other is only a 512 KB line - home. The home has a wireless setup. I use a Belkin router connected to an airport express base station and a WDS in place. iChat works fine. In the office I have a Belkin router and I am unable to do the iChat video. The error message reports the 'unable to determine bandwidth' message. I can type messages no problem. Today I was up in London and using iChat on another Belkin router wirelessly and it worked fine. I am using 10.4.8. Strange. Itb sounds like a router thing as the office router model is not the same as the one at the house or the other one I usd today. Both are older. Any ideas.
Thanks
Mark

It seems a lot of people are having trouble with the bandwidth message. I have been working on the problem for a day now. Many people are stating things about preferences but in most cases this doesn't seem to be the problem. After lengthy discussions with Apple Tech help they sent me an article about port forwarding. This afternoon I took my ethernet cable out of my airport express and put it directly to the computer. I then logged into the modem that my ISP provided (one which is Mac friendly!) and used the advanced feature to set port forwarding - all the ports are specified in the article. Hopefully tomorrow when one of my friends is logged in I can initiate audio chat without this annoying problem. If not, who knows??
The article is at: http://docs.info.apple.com/article.html?artnum=93208
Good luck

Similar Messages

The following error occured when searching for on-premises exchange server

I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
No problems - [email protected]
Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
Add a user account and assign a user role
Getting "Unexpected error occurred" when Setting up an e-mail account for user
Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
The user account is created ok just no e-mail address is created for the user
I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
The following error occurred when searching for the On-Premises Exchange server
When I try to open Microsoft Exchange Management Shell, I get a similar error
I've download & run EMTShooter which just identifies there is an error & gives me the same error
I've installed & re-installed WinRM IIS Extensions
I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
Still cannot connect to Exchange
I've trawled through the internet for two days checking & testing every solution but no luck
I've checked every setting against another Windows SBS 2011 Server we've installed & works
I cannot find a difference
Can someone help me or point me in the right direction?
Peter Ralphs

Thanks for the reply Cara
Here's the original error I was getting when opening Exchange Management Console
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I got similar error when trying to access the Exchange Management Shell
VERBOSE: Connecting to SERVER.myd.local
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],
PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
When I opened the Exchange Management Console this week, the error had changed slightly
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
This is the result of the Health Check Scan
Organization: First Organization
Default Global Address List Changed
The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
-eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
-eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
The default public folder database is remote
The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
Server: SERVER
Disk timeout changed
Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
Client RPC binding found
The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
I also noticed that the Health Check stated that "The default public folder database is remote"
Has this something to do with it ?
Regards
Peter

The following error occured while searching for on-premises exchange server

I've previously posted this under the Exchange Forums - Exchange Server 2010
I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
No problems - [email protected]
Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
Add a user account and assign a user role
Getting "Unexpected error occurred" when Setting up an e-mail account for user
Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
The user account is created ok just no e-mail address is created for the user
I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
The following error occurred when searching for the On-Premises Exchange server
When I try to open Microsoft Exchange Management Shell, I get a similar error
I've download & run EMTShooter which just identifies there is an error & gives me the same error
I've installed & re-installed WinRM IIS Extensions
I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
Still cannot connect to Exchange
I've trawled through the internet for two days checking & testing every solution but no luck
I've checked every setting against another Windows SBS 2011 Server we've installed & works
I cannot find a difference
Can someone help me or point me in the right direction?
Peter Ralphs

Thanks for the reply Larry
I've added more detail about the error, this server is exactly how I initially installed it. This was a clean install not a migration so Exchange was a new installation. I have not applied any service packs as I did not want to confuse matters
or compound the issue. I was wondering whether to install Server 2008 Service Pack 1 & the Exchange Service Packs. I will check the event logs & report back with what I find.
Here's the original error I was getting when opening Exchange Management Console
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I got similar error when trying to access the Exchange Management Shell
VERBOSE: Connecting to SERVER.myd.local
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],
PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
When I opened the Exchange Management Console this week, the error had changed slightly
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
This is the result of the Health Check Scan
Organization: First Organization
Default Global Address List Changed
The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
-eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
-eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
The default public folder database is remote
The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
Server: SERVER
Disk timeout changed
Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
Client RPC binding found
The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
I also noticed that the Health Check stated that "The default public folder database is remote"
Has this something to do with it ?
Regards
Peter

Error in enterprise search center

Hi,
I have an enterprise search center which has suddenly stopped working. The error message did not say much so I created a new search page. When attempting to do a search I receive the error below. I've tried accessing the version history on those files
to determine if I can restore to a working version but I am getting a report that the "server is busy". Any ideas of what I could do to fix this issue?
thanks,
Sherazad.
Display Error: The display
template had an error. You can correct it by fixing the template or by
changing the display template used in either the Web Part properties or
Result Types.
Template '/_catalogs/masterpage/Display Templates/Filters/Filter_Default.js' not found or has syntax errors. (LoadTemplate: )
Template
'/_catalogs/masterpage/Display
Templates/Filters/Filter_SliderBarGraph.js' not found or has syntax
errors. (LoadTemplate:
Sherazad

Hi Sherazad,
According to your description, you have an enterprise search center which worked well before the error occurred.
For resolving your issue, you are able to run the command below with SharePoint 2013 Management Shell.
Enable-SPFeature SearchWebParts -url http://<the problematic site url>
Here is a similar post for your reference:
http://sharepoint.stackexchange.com/questions/70452/query-builder-for-result-source-not-working-in-central-admin
If the issue still exists, I recommend you install the SharePoint Server 2013 update: March 12, 2013 to fix this issue.
SharePoint Server 2013 update: March 12, 2013
http://support.microsoft.com/kb/2767999
I hope this helps.
Thanks,
Wendy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error occurred during search

Hello,
I'm getting the following error when I use the search in the Portal:
Error occurred during search: com.sapportals.wcm.WcmException: error: communication with preprocessor failed;index=teste,location=cdphl815:30203 (Errorcode 42)
That's probably an indexing error:
Indexing document failed. Preprocessor: failed (Errorcode 6800)
But I don't know what to do to fix this.
Please... help me!!
Thanks
Luisa

Hi Luisa,
It might help:
Trex Administration Tool:
http://help.sap.com/saphelp_erp2004/helpdata/en/23/92bd4016c0cc38e10000000a155106/frameset.htm
General TREX Configuration :
http://help.sap.com/saphelp_erp2004/helpdata/en/c2/d81e40777cdd5fe10000000a155106/frameset.htm
Post-Installation Activities :
http://help.sap.com/saphelp_erp2004/helpdata/en/8b/1cc83edf72e16be10000000a114084/frameset.htm
Hope it helps,
Yoav

Communication error, user "did not accept your invitation"

I think need some help. I have read many of the topics, however i have not been able to address my issue. Let me start by saying I am new to Macs (about 3 weeks) and not very technical. I have a Imac and also running time capsule as my wireless connection. As instructed i obtained an AIM account and attempted to do video chat, however when I try i get a communication error, user "did not accept your invitation". I have spent about an hour with apple tech services and have been able to successfully connect to the Apple test buddy. In fact my friend was also able to connect to the Apple test buddy. I have not tested a connection with anyone else.
I would greatly appreciate any help with this issue.

Hi Thank you for responding,
The message says that there was a communication error - did not receive response from the other person. On the other side they received the same error. Below is the error log
Yes, Time Capsule sits between my modem and my computer. I also have a Voice over Internet phone.
The entire set up is as follows.
Internet modem (make; Ambit) to Voice over Internet Modem to Time Capsule (set as router - share a single IP address using DHCP & NAT)
as for setting up time capsule - i set it to "i don't have a wireless network and wanted to create one"
I have not attempted to reach anyone in table 2 - I will do so and let you know
my error log -- again thanks for your help
Date/Time: 2008-03-27 20:46:00.255 -0400
OS Version: 10.5.2 (Build 9C7010)
Report Version: 4
iChat Connection Log:
2008-03-27 20:45:25 -0400: AVChat started with ID 2073701542.
2008-03-27 20:45:25 -0400: loopie5331: State change from AVChatNoState to AVChatStateWaiting.
2008-03-27 20:45:25 -0400: 0x14ae87f0: State change from AVChatNoState to AVChatStateInvited.
2008-03-27 20:45:35 -0400: 0x14ae87f0: State change from AVChatStateInvited to AVChatStateConnecting.
2008-03-27 20:45:35 -0400: loopie5331: State change from AVChatStateWaiting to AVChatStateConnecting.
2008-03-27 20:45:55 -0400: 0x14ae87f0: State change from AVChatStateConnecting to AVChatStateEnded.
2008-03-27 20:45:55 -0400: 0x14ae87f0: Error -8 (Did not receive a response from 0x14ae87f0.)
2008-03-27 20:45:55 -0400: loopie5331: State change from AVChatStateConnecting to AVChatStateEnded.
2008-03-27 20:45:55 -0400: loopie5331: Error -8 (Did not receive a response from 0x14ae87f0.)
Video Conference Error Report:
17.607834 @SIP/SIP.c:2719 type=4 (900A0015/0)
[SIPConnectIPPort failed]
19.608154 @SIP/SIP.c:2719 type=4 (900A0015/0)
[SIPConnectIPPort failed]
Video Conference Support Report:
0.523429 @Video Conference/VCInitiateConference.m:1582 type=2 (00000000/0)
[Connection Data for call id: 1 returns 1
9.592914 @Video Conference/VCInitiateConference.m:1597 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
9.600060 @Video Conference/VCInitiateConference.m:1701 type=2 (00000000/0)
[Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
15.607906 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK5e75a87f218371dd
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=300068541
Call-ID: 4a78f1f6-fc60-11dc-80cb-9299630c4012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 731
v=0
o=Aldo 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2800
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3538228969
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1659256788
16.108265 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK5e75a87f218371dd
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=300068541
Call-ID: 4a78f1f6-fc60-11dc-80cb-9299630c4012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 731
v=0
o=Aldo 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2800
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3538228969
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1659256788
17.108616 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK5e75a87f218371dd
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=300068541
Call-ID: 4a78f1f6-fc60-11dc-80cb-9299630c4012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 731
v=0
o=Aldo 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2800
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3538228969
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1659256788
17.608293 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:32768;branch=z9hG4bK757dcfb6358328fd
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=2081639093
Call-ID: 4baa518c-fc60-11dc-80cb-ea4e74ce4012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:32768>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 725
v=0
o=Aldo 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2800
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 32768 RTP/AVP 110 121 12 3 0
a=rtcp:32768
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3538228969
m=video 32768 RTP/AVP 123 126 34
a=rtcp:32768
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 32768 VIDEO 32768
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1659256788
18.108636 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:32768;branch=z9hG4bK757dcfb6358328fd
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=2081639093
Call-ID: 4baa518c-fc60-11dc-80cb-ea4e74ce4012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:32768>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 725
v=0
o=Aldo 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2800
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 32768 RTP/AVP 110 121 12 3 0
a=rtcp:32768
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3538228969
m=video 32768 RTP/AVP 123 126 34
a=rtcp:32768
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 32768 VIDEO 32768
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1659256788
19.108980 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:32768;branch=z9hG4bK757dcfb6358328fd
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=2081639093
Call-ID: 4baa518c-fc60-11dc-80cb-ea4e74ce4012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:32768>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 725
v=0
o=Aldo 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2800
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 32768 RTP/AVP 110 121 12 3 0
a=rtcp:32768
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3538228969
m=video 32768 RTP/AVP 123 126 34
a=rtcp:32768
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 32768 VIDEO 32768
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1659256788
Video Conference User Report:
0.000000 @:0 type=5 (00000000/16402)
[Local SIP port]
19.715397 @Video Conference/VideoConferenceMultiController.m:1474 type=5 (00000000/0)
[IP And Port Data With Caller IP And Port Data: Obtained 120 bytes of local IP and port data (3 entries). Remote data was 0 bytes (0 entries).
B
Message was edited by: aldoz

LDAP error 53002 (LDAP search failre operations error)

Good day all,
When implementing LDAP authentication, I've received this error while configuring LDAP authentication. Here's how it happens:
A) I created LDAP servers in security settings - they test successfully with the settings that I put in ("LDAP server connected successfully")
B) Then I created a variable USER (with blank default initialization and LDAP variable user - (which I created in advanced LDAP server's settings) and Initialization Block - Authentication - after that I wasn't able to successfully test it - I would get the 53002 error.
C) If I check "Use bind parameters" box - I get 53002 error with "Bad Search Filter" message
Can anyone please advice me on which steps i could take to troubleshoot?
Thank you

Are you using OID or MSAD? If OID, check my blog entries here
http://oraclebizint.wordpress.com/2007/10/10/oracle-bi-ee-101332-using-ldapoid-authentication/
http://oraclebizint.wordpress.com/2007/10/12/oracle-bi-ee-101332-and-oid-user-and-group-phase-2/
I think your variable for the LDAP user is not correct.
Thanks,
Venkat
http://oraclebizint.wordpress.com

Oracle.jbo.NoDefException: Error in Quick Search when we use View Criteria

We encountered NoDefException error in Quick Search. We are using JDeveloper 11.1.1.6.0, JHeadstart 11.1.1.4
I am able to reproduce the error by applying Oracle's HR schema. The following are the steps to reproduce with HR schema:
1. Create an employee view named EmpVw by using the following query:
select
employee_id,
first_name,
last_name,
email,
phone_number,
salary
from employees
2. Create a lookup view named CountryLookupView by using the following query:
select
country_id,
country_name
from countries
3. Create a view named EmpCountryVw by using the following query:
select
emp.employee_id,
emp.first_name,
emp.last_name,
cnty.country_id,
cnty.country_name
from employees emp
inner join departments dept
on emp.department_id = dept.department_id
inner join locations loc
on dept.location_id = loc.location_id
inner join countries cnty
on loc.country_id = cnty.country_id
4. Create a LOV for the CountryId attribute in EmpCountryVw. The data source for this LOV is the CountryLookupView we just created. UI hints list type is Input Text with List of Values.
5. Create View Criteria for EmpVw view, name it as EmpVwSearchCriteria Select EmpCountryVw from Attribute list, Operator is Exists, Operand is Inline View Criteria.
6. Create new service EmployeeSearchService. Select EmpVw to the data model.
7. In JHeadStart Application Definition Editor, create a new service node EmloyeeSearchService, set EmpVwSearchCriteria as Quick Search View Criteria in Search Settings section. Run the JAG, and then run the application.
8. On the application screen, select EmployeeSearchService from the module drop-down list, on Emp Vw screen, click the glass icon to display the pop-up country search dialog, type in CA as country code, run the search, select the row with "Ca Canada" and then click OK button to close off the pop-up dialog. on Emp Vw screen, click "->" to run the search with Country Id = CA. Note the error dialog popup.
The error message is: oracle.jbo.NoDefException: JBO-25058
Caused by: oracle.jbo.NoDefException: JBO-25058: Definition data_MyJhsTutorial_UIShellPageDef_mainRegion_oracle_hr_pageDefs_EmpVwPageDef_WEB_INF_adfc_config_EmpVw_xml_EmpVwTaskFlow_EmpVwIteratorEmpVwSearchCriteriaQuery.vcrow125.EmpCountryVw.EmpCountryVwNestedCriteria.vcrow128.CountryId of type Attribute is not found in EmpVw.
     at oracle.jbo.server.ViewObjectImpl.findAttributeDef(ViewObjectImpl.java:7310)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding._isTransientAttribute(FacesCtrlSearchBinding.java:585)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding._changeQueryModeIfNeeded(FacesCtrlSearchBinding.java:577)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding.processQuery(FacesCtrlSearchBinding.java:397)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     ... 63 more
Please let me know if you have solution for this error. Thanks in advance.
Sarah

Sarah,
I could reproduce the error.
However, I created a drag-and-drop page fragment with quick search and table, and modified the adfc-config-EmpVw task flow to reference the drag and drop page:
<view id="EmpVwTable">
<page id="__120">/EmpvwDD.jsff</page>
</view>
And then I still get the same error, so this looks like an ADF bug to me.
I also created a stand-alone jspx page using drag and drop, same error as well. I suggest you make a testcase without JHeadstart and contact Oracle Support.
Steven Davelaar,
JHeadstart Team.

Robohelp 9: Error when using search terms including the word "not"

We are moving from Robohelp 7 to Robohelp 9. We realize that Boolean operators such as NOT are supposed to be working now, but we do have times when we might find ourselves using search terms that include the word "not" on its own.
The problem that we are finding is that if we search for something like "office not installed", because that phrase is part of a specific error message we might be trying to locate, we are getting the error, "The words you typed is not a valid expression" [sic].
We have tried making modifications to the Stop Words and Always Ignore words and can't seem to find a solution. We do need to be able to search using the word "not" as a regular search term. Even as a Boolean operator (NOT), we are getting the same error. Searching for "office installed" will get us the result that we want, but we have a team of users who will definitely instinctually search using the word "not" since it's part of the error they are searching for.
Thoughts?

Hi Benjamin
First, I don't believe the Always Ignore has anything to do with Searching. That particular list is used when you instruct RoboHelp to build an index using the Smart Index Wizard.
Actually, something like "Office Not Installed" is a perfect use of the Index. But I'm guessing here that your system doesn't include an index in favor of trawling through the pile of words in the project.
If you aren't using an index yet, I'd highly suggest you investigate it. In a properly indexed system your users will find what they are looking for infinitely faster and easier than they ever will by using Search.
Just a thought... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

An error occurred while searching tasks from the SOA Server

While clicking task tab in self service page i am getting
"An error occurred while searching tasks from the SOA Server." even after sao server is up.

http://host1:8001/soa-infra/ is down
I restarted soa server and found the soa changed to Running status after the below error in console
Nov 16, 2011 12:06:21 PM GMT+05:30> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'soa-infra'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: java.lang.RuntimeException: Failed to start Service "Cluster" (ServiceState=SERVICE_STOPPED, STATE_ANNOUNCE)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:38)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:637)
at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:3)
Truncated. see log file for complete stacktrace
I checked OIM log also after clicking the task tab and found below error in log
Error occurred while connecting to BPEL
[2011-11-16T14:59:02.703+05:30] [oim_server1] [ERROR] [] [oracle.iam.tasklist.agentry.task] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: bb6ba2093960fbcc:-2164bc25:133aba77382:-8000-00000000000000a4,0] [APP: oim#11.1.1.3.0] javax.naming.NameNotFoundException: Unable to resolve 'TaskQueryService'. Resolved '' [Root exception is javax.naming.NameNotFoundException: Unable to resolve 'TaskQueryService'. Resolved '']; remaining name 'TaskQueryService'
[2011-11-16T14:59:02.703+05:30] [oim_server1] [WARNING] [] [oracle.iam.consoles.faces.mvc.common] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: bb6ba2093960fbcc:-2164bc25:133aba77382:-8000-00000000000000a4,0] [APP: oim#11.1.1.3.0] oracle.iam.platform.canonic.base.NoteException: An error occurred while searching tasks from the SOA Server.

Error when performing search: getExtendedProperties [LDAP: error code 50

Hi there,
We are currently running OAS 10.1.2. We have an application which is running Oracle Forms. To get access to these forms, the authenication is a combination of the user logging on to their windows domain, (AD SSO) and having the correct username and groups within Oracle OID and DAS.
We have a major problem at the moment in Production where every so often a user will get rejected for having insufficient access rights, and the UserID in the logs being Null. Yet if they try again it works.
Does anyone know why this might be happening for?
Here is the Forms log :
09/07/31 06:59:32 Forms session <967> runtime process id = 10,780
09/07/31 07:02:27 oracle.ldap.util.AccessDeniedException: General Error when performing search: getExtendedProperties [LDAP: er
ror code 50 - Insufficient Access Rights]
09/07/31 07:02:27 at oracle.ldap.util.User.getExtendedProperties(User.java:365)
09/07/31 07:02:27 at oracle.forms.servlet.FormsOIDContext.getUserCredentials(Unknown Source)
09/07/31 07:02:27 at oracle.forms.servlet.FormsServlet.getUserId(Unknown Source)
09/07/31 07:02:27 at oracle.forms.servlet.FormsServlet.doRequest(Unknown Source)
09/07/31 07:02:27 at oracle.forms.servlet.FormsServlet.doGet(Unknown Source)
09/07/31 07:02:27 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
09/07/31 07:02:27 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
09/07/31 07:02:27 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
09/07/31 07:02:27 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
09/07/31 07:02:27 at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
09/07/31 07:02:27 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
09/07/31 07:02:27 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
09/07/31 07:02:27 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192
09/07/31 07:02:27 at java.lang.Thread.run(Thread.java:534)
09/07/31 07:02:27 oracle.ldap.util.AccessDeniedException: General Error when performing search: getExtendedProperties [LDAP: er
ror code 50 - Insufficient Access Rights]
09/07/31 07:02:27 In getUserId method: caught oracle.ldap.util.AccessDeniedException: General Error when performing search: ge
tExtendedProperties [LDAP: error code 50 - Insufficient Access Rights]
09/07/31 07:02:27 In doRequest method in ue.isNamingException
09/07/31 07:02:27 Redirecting to DAS to update the resviewer list
09/07/31 07:02:27 UserID is NULL redirecting to DAS
09/07/31 07:02:27 Forms Group DNcn=Logical Application Group, orclApplicationCommonName=formsApp_dras03.workcover.qld.gov.au_63A
36930655911DBBF37F32F8ED7FD07, cn=forms, cn=Products, cn=OracleContext
09/07/31 07:02:27 The DAS URL generated: http://prinfds.workcover.qld.gov.au:7777/oiddas/ui/oracle/ldap/das/mypage/AppCreateReso
urceInfo?resKey=prcar_sso&resType=oracleDB&resViewer=cn%3DLogical+Application+Group%2C+orclApplicationCommonName%3DformsApp_dras
03.workcover.qld.gov.au_63A36930655911DBBF37F32F8ED7FD07%2C+cn%3Dforms%2C+cn%3DProducts%2C+cn%3DOracleContext&doneURL=http%3A%2F
%2Fdras03.workcover.qld.gov.au%3A7778%2Fforms%2Ffrmservlet%3Fconfig%3Dprcar_sso%26form%3DSY0001.fmx&cancelURL=
09/07/31 07:05:26 oracle.ldap.util.AccessDeniedException: General Error when performing search: getExtendedProperties [LDAP: er
ror code 50 - Insufficient Access Rights]
09/07/31 07:05:26 at oracle.ldap.util.User.getExtendedProperties(User.java:365)
09/07/31 07:05:26 at oracle.forms.servlet.FormsOIDContext.getUserCredentials(Unknown Source)
09/07/31 07:05:26 at oracle.forms.servlet.FormsServlet.getUserId(Unknown Source)
09/07/31 07:05:26 at oracle.forms.servlet.FormsServlet.doRequest(Unknown Source)
09/07/31 07:05:26 at oracle.forms.servlet.FormsServlet.doGet(Unknown Source)
09/07/31 07:05:26 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
09/07/31 07:05:26 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
09/07/31 07:05:26 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
09/07/31 07:05:26 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
09/07/31 07:05:26 at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
09/07/31 07:05:26 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
09/07/31 07:05:26 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
09/07/31 07:05:26 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192
09/07/31 07:05:26 at java.lang.Thread.run(Thread.java:534)
09/07/31 07:05:26 oracle.ldap.util.AccessDeniedException: General Error when performing search: getExtendedProperties [LDAP: er
ror code 50 - Insufficient Access Rights]
09/07/31 07:05:26 In getUserId method: caught oracle.ldap.util.AccessDeniedException: General Error when performing search: ge
tExtendedProperties [LDAP: error code 50 - Insufficient Access Rights]
09/07/31 07:05:26 In doRequest method in ue.isNamingException

I fixed it in my environment.
formweb.cfg has oid_formsid and formsid_group_dn. Verify if these values are correct.
Also ensure that formsid_group_dn has no blank spaces after ',' (commas)
formsid_group_dn=cn=Logical Application Group,orclApplicationCommonName=formsApp_xyzhost_1224C3F0A73B11DBBFC783346A955D8F,cn=forms,cn=Products,cn=OracleContext

ERROR: "You did not complete the entire form. Please enter your country."

When I tried to download a song tonight, I got a message that said that my billing info had changed and that I needed to verify it before I could purchase any music. On the "Edit Payment Information" page, I put in all of my info (my address was missing), and hit done. I get the error: "You did not complete the entire form. Please enter your country." Well, the country field is not editable, and but it says "United States," which is the right country. I can't get passed it, so I can't download anything. I'm running the latest version of iTunes... but I haven't purchased anything since.
The other thing that concerns me is that I didn't change any billing info, so this is a bit strange. Does anyone have any ideas of what's going on? Thanks!!

Just in case this ever happens to anyone else, here is how to fix the problem (THANKS, ITUNES SUPPORT)!!
1) Sign out of the iTunes Store by choosing Sign Out from the Store menu in iTunes.
2) Visit Apple's My Info website:
http://myinfo.apple.com
3) Choose your country and preferred language. Then enter your iTunes Store account name and password and click Continue.
4) Choose Address Book from the menu on the left. On the Edit Address Book page, look at your shipping addresses at the bottom. If you have multiple shipping addresses, remove any out-of-date or duplicate addresses by clicking Delete. Also, make sure the state or province field is filled out correctly for each address. To edit an address, click Edit.
5) Now choose Phone Numbers from the menu on the left to look at your phone numbers. The area codes should be in the area code fields and the phone numbers should be in the phone number fields. If an area code is missing, or if it is in a phone number field, your account information may not save properly.
6) Make any other necessary corrections, then click the Save Changes button.
7) Click Log out in the upper-right corner.
When you make your next iTunes Store purchase, you will be asked to review your billing information. At that point, you can change your information or simply click Done. After that, you should be able to purchase items.

TREX7 - Following error occurred in search: 2029

Hi,
We have done an upgrade of E-Recruitment 2.0 to 6.0.With respect to that we have installed TREX 7.0 on AIX platform.We have created the indexes on the new TREX
Version info for RFC server : SERVER Version TREX 7.0
Version info for search engine: DrFuzzy 6.1
When i do a TEST Search from TCode SKPR07 i am getting "Following error occurred in search: 2029" also i can see many entries under the "Problem Case" with Error Code 8002.
When i do a search from the application i doesn't return any values.
What could be the reason.
Regards,
Sam

Hi Sam,
the error 2029 could have too many different reasons like: incompartibility between ABAP and TREX versions, corrupted index, wrong query e.t.c .
Please open new OOS ticket regarding this issue.
Regards,
Mikhail

TS1717 i keep getting error r6025 when searching for music.i have downloaded what itunes suggest but no change

i keep getting error r6025 when searching store.i have downloaded the itunes suggestion but no change

I was getting -3231 and kept seeing references online about routers and firewalls and connectivity issues. I merely turned off my WiFi and went hardwired with ethernet and problem solved. Give it a try and see if it works for you.

Error on Basic search portlet in Oracle portal

I am working on Oracle 10g portal. I uploaded lot of documents and completed indexing as per Oracle guidelines. There are some errors during indexing.Out of 5000 documents 22 are not indexed. When I try to search from a page I get this error. This problem doesn't exist in our development environent where there are only few documents loaded. I have encountered errors in this environment also during index creation.
Appreciate your help.
Internal error (WWC-00006)
An unexpected error has occurred (WWS-32100)
Unknown Exception (WWC-45131)
User-Defined Exception (WWV-11230)
Unexpected error - ORA-20000: Oracle Text error:
DRG-10599: column is not indexed (WWC-35000)
----------------

Hi,
What errors did you get during indexing?
-Ron

Bandwith Error ( I did search..honest)

Similar Messages

Maybe you are looking for