Banging My Head Against a K7N2 Delta

Hi All, Really need some advise.
I am on My 2nd K7N2 Delta Motherboard.
I am running a 350 W PSU, +3.3 28A, +5 30A and 12v 15A. Running a Duron 1.1 Ghz., 512 MB DDR3200. Video Card is a Shoddy 64mb AGP (4x).
Ok so I install the Motherboard, CPU checked inserted correctly, AGP card the same, Power on….. and D bracket shows Bad Processor, no video output. So Processor taken out, placed back into old board Works fine. So back into MSI board and the same think, take board back exchanged for a new one and exactly the same.
Can anybody help or suggest anythink, I have tried 2 power supplies, running the board with and without the 12v Power connection. And with No Hard disks. All giving the same results.
Just to add a note, i no the CPu you is **** but i intend to invest as soon as i get the board working, and also been on the PSU calc thing and it says i will need 237w so i think the PSU should be fine.
I am willing  to try any experiements you guys give me.
Rich  

When my computer boots the cpu shows as a XP3200 which runs at 2.2 gig.
I had no problems just walked the Bios up to 200 FSB X 2 =400 FSB,
200 X 11 = 2.200.
The XP2500 runs at 166 x 2 = 333 FSB, 166 X 11 = 1.83 stock settings.
The XP2500 is a good overclocker I bought mine from Newegg for 90.
More info on your ram what brand?  The Nvidia memory controler is pickey about ram just because it works in another board does not mean it will work.
Also as you go to faster processor that or running around 90 watts the power supplys also become very inportant what worked with a 1 gig may not have enogh.
Memory problems can show up as bad processor as will not enogh power from psu.
Also make sure that the heat sink and thermal greese or applied correctly.
Set ram 1 to 1 so that it's running at same FSB as CPU.
Might try a PCI video card if you can borrow one to try.
Change one thing at a time.

Similar Messages

  • Banging my head against a brick wall

    Some background information: I currently have two phone lines, let’s call them line A and line B.
    At the beginning of September I decided to move by broadband to BT and signed up online for a Total Broadband package to be activated on line A (the line on which my previous broadband service was active). During the signing up process I was asked if I wished to save money and sign up to the line rental saver, which I did. I got my order confirmation by e-mail and thought all was well.
    Having ordered BT Broadband for line A,  I decided that I would cancel line B, as I had no use for it.
    Shortly after the initial order confirmation e-mail, I received a further e-mail and noticed it stated that new services were starting on both line A and line B, which confused me as I had never signed up for any changes to line B. So I called Customer Services to check out the situation and explained that I wished to cancel line B and did not understand why services relating to that line were mentioned in my e-mail. I was informed that BT was unable to do anything at the time due to there being an order on the line. However, I was told that if I called back once the broadband had been activated on line A, then everything could be sorted out.
    So, as soon as the broadband order had been completed on line A, I called back Customer Services to cancel line B. However, I was told that I had paid the line rental saver for line B and would lose that money if I cancelled the line. I checked my account online and, sure enough, BT had activated the broadband on line A but, inexplicably, had applied the line rental saver to line B.
    Immediately, I called Customer Services to sort out the problem: I wanted BT to change the line rental saver from line B to line A (as per my order) and cancel line B. However, I was told that it was not possible to change the line rental saver from one line to another. I tried to explain that the error was on the part of BT and that it was down to them to find a solution, only to be met by protestations that this was not possible. I have now spoken to customer services on three separate occasions to try and sort out the problem, without success. Twice I have requested call-backs from a manager and heard nothing either time.
    I have now reached the end of my tether as I do not understand why BT is claiming that they are unable to correct their own error. As a result of the situation, I am currently paying for a line I no longer want and am unable to cancel the line without losing a fair amount of money.
    Where did it all go wrong with BT customer service? I am sick of speaking to people who struggle to grasp the nature of issues and appear powerless to address any problems unless they are on their crib sheets. It is very frustrating that BT makes it impossible to escalate problems to managers when needed and I am incredulous that the Company is trying to claim that it is unable to sort out a billing error of its own making (particularly as I would imagine that the change of line rental saver from one line to another is simply a matter of changing some details on a computer system).
    I hope that someone here can offer some help or point me in the right direction, as I currently feel like I am banging my head against a brick wall and am very disappointed with BT’s response so far.
    Many thanks
    DJW

    Hi David, sorry to hear about your problems. If you click the link in my signiture below my posts the forum mods will be happy to look into this for you
    Contact The Mods
    Use Live Chat to speak to an advisor
    Charges for cancelling your contract early

  • Banging my head against a brick wall, please help!

    Hi can someone please help me.
    I keep coming up against this error, sometimes I manage to get rid of it through hours of tinkering, but still have not found out why it comes up. On theis new site i'm working on, i just can't get rid of it period.
    Here is the error.
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
    at workinprogress_fla::MainTimeline/frame21()
    at flash.display::MovieClip/gotoAndStop()
    at workinprogress_fla::MainTimeline/clickMenus()
    And here is the code on Frame 21.
    pic1.addEventListener(MouseEvent.CLICK, clickpic1);
    function clickpic1 (evtobj:MouseEvent) {
    //go to the section clicked on i.e menu page!
    gotoAndStop ("pic1");
    pic2.addEventListener(MouseEvent.CLICK, clickpic2);
    function clickpic2 (evtobj:MouseEvent) {
    //go to the section clicked on i.e menu page!
    gotoAndStop ("pic2");
    pic3.addEventListener(MouseEvent.CLICK, clickpic3);
    function clickpic3 (evtobj:MouseEvent) {
    //go to the section clicked on i.e menu page!
    gotoAndStop ("pic3");
    pic4.addEventListener(MouseEvent.CLICK, clickpic4);
    function clickpic4 (evtobj:MouseEvent) {
    //go to the section clicked on i.e menu page!
    gotoAndStop ("pic4");
    pic5.addEventListener(MouseEvent.CLICK, clickpic5);
    function clickpic5 (evtobj:MouseEvent) {
    //go to the section clicked on i.e menu page!
    gotoAndStop ("pic5");
    pic6.addEventListener(MouseEvent.CLICK, clickpic6);
    function clickpic6 (evtobj:MouseEvent) {
    //go to the section clicked on i.e menu page!
    gotoAndStop ("pic6");
    pic7.addEventListener(MouseEvent.CLICK, clickpic7);
    function clickpic7 (evtobj:MouseEvent) {
    //go to the section clicked on i.e menu page!
    gotoAndStop ("pic7");
    pic8.addEventListener(MouseEvent.CLICK, clickpic8);
    function clickpic8 (evtobj:MouseEvent) {
    //go to the section clicked on i.e menu page!
    gotoAndStop ("pic8");
    Can someone please help me out.
    Thanks
    Tom

    thanks for your replys.
    I have debugged the movie, and it is now saying the following
    Attemping to launch and connect to Player using URL /Volumes/Documents/Sketch Collective/Web Sketch/On the Go/Fuggles Website/Flash/Green Website/workinprogress.swf
    [SWF] Volumes:Documents:Sketch Collective:Web Sketch:On the Go:Fuggles Website:Flash:Green Website:workinprogress.swf - 2383999 bytes after decompression
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
    at workinprogress_fla::MainTimeline/frame21()[workinprogress_fla.MainTimeline::frame21:47]
    at flash.display::MovieClip/gotoAndStop()
    at workinprogress_fla::MainTimeline/clickMenus()[workinprogress_fla.MainTimeline::frame11:13 ]
    I am still clueless, every instance name seems absolutely fine and all in place.
    Any ideas?

  • Motion 4 + layered PSD files = me banging my head against the wall

    I posted this same question in the other M4/PSD file problem, but it was marked as answered (and the answer isn't working for me).
    I'm having a similar problem, but changing the resolution to the exact max of 2896x2896 doesn't work for me...and neither does any smaller resolution for some reason.
    Today, my layered PSD file is at least not experiencing the crazy tile-effect you included in your posted images, but it is now:
    1) always converting the top layer of the PSD file to a flattened image of the whole file.
    2) ignoring/mutating my alpha channel information, as areas that should be transparent and smoothly masked off are now opaque and/or blocky.
    My images are large, but I need to keep them large for dollying in real closely when i fly a camera through the scene. This is not a problem in After Effects, but I also need to do a lot of these 2.5D animations and several need particle/replicator effects... and I just work much much faster in Motion than AE. I don't remember having this problem with Motion 3 at all, but I can't say I've done a scientific comparison (nor do I want to uninstall M4 for M3).
    My system info can be found here:
    [IMG]http://i36.tinypic.com/2n744di.jpg[/IMG]
    [IMG]http://i33.tinypic.com/28cks42.jpg[/IMG]
    Original PSD file info:
    [IMG]http://i37.tinypic.com/amdr9v.jpg[/IMG]
    [IMG]http://i36.tinypic.com/99kv1g.jpg[/IMG]
    [IMG]http://i33.tinypic.com/3355w8x.jpg[/IMG]
    [IMG]http://i37.tinypic.com/1zb6y3m.jpg[/IMG]
    [IMG]http://i35.tinypic.com/9i5rhz.jpg[/IMG]
    Motion 4 info:
    [IMG]http://i38.tinypic.com/es40v4.jpg[/IMG]
    [IMG]http://i37.tinypic.com/2crva83.jpg[/IMG]
    [IMG]http://i35.tinypic.com/2e3popz.jpg[/IMG]
    [IMG]http://i37.tinypic.com/jrv8tz.jpg[/IMG]
    [IMG]http://i37.tinypic.com/28rh6hs.jpg[/IMG]
    Any help is appreciated!
    Thank you!

    I can't believe I didn't see that! I scanned them in 24-bit color but they are B&W images anyways, so I'm not sure why or how they ended up as 8-bit greyscale... maybe has something to do with the lousy HP dinosaur-of-a-scanner and it's weird proprietary HP interface (couldn't get it to interface with PS4 and don't use it enough to fuss with it).
    Thanks!
    I think that was about the quickest/least-frustrating help forum experience ever =)

  • Banging my head against data transfer to PC from L...

    Hi All,  I know that MS has brought out the transfer music, photos, videos and podcasts but thats not much use if you want your texts contacts ectera.  I have got the Backup set to automaticaly backup app list+settings, texts and photos to the cloud but for some reason its not happening.  I have SkyDrive on my phone and PC but I am still seeing empty empty folders in the SkyDrive.  To save my hair can anyone tell me how I can get my texts and photos onto my PC.
    Why has Nokia not created the PC Suite like that did for the Symbian Phones that was great.

    Please use the forum search function, this is asked and answered many times before.
    You have no access to the data backed up using the function on the phone. Video and photoscan be synced to your Skydrive or copied to a PC using the companion app or MTP.
    Contacts, calendars and skydrive are on outlook.com where you log in with your Microsoft account. or you can use a number of tools, especially Microsoft essentials to access the information on your PC. All these are built in to Windows 8.
    Reading the help available on windowsphone.com might also be a good plan.
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • Portfolio question that I am banging my head against the wall trying to figure out...

    I want to build a portfolio with categories. You click something and the appropriate slideshow or lightbox appears or comes into the scene. The troubling part is I dont want to scroll anywhere. I just want 6 categories and each respective lightbox all in one place. Any ideas?

    In this case, I would reccomend you use something like a tabbed panel widget and place a lightbox for each inside a specific panel.  You could create the overall layout for the lightbox display in the first panel and copy it across the rest to maintain design consistency.
    Cheers,
    Justin

  • Banging My Head Against Grep Wall

    I'm trying to filter lines out of a log within a shell script, with line like this...
    cat log | grep -v "filter word" | grep -v "filter 2" > newLog
    ...but I cannot find the grep or egrep command for something slightly more complex than a simple match.
    I want to exclude (delete) all lines ending with "/" EXCEPT if they begin with "deleting".
    So a file which contains these 4 lines...
    this gets through
    deleting - this gets through/
    deleting - this gets through
    this does NOT get through/
    ...will result in this...
    this gets through
    deleting - this gets through/
    deleting - this gets through
    Thanks very much for any pointers. Maybe I shouldn't be trying it with just grep?

    This works for me at least for the small sample that you provide:
    grep '^deleting.*/$|[^>$' log > newLog
    What it lets through is:
    1. Lines that begin with deleting AND end in /
    2. Lines that do not end in a /
    I hope that this does what you need.
    Message was edited by: hungryjoe
    Message was edited by: hungryjoe
    Message was edited by: hungryjoe

  • Banging my head against the wall

    I am working on a program to calculate bmi. I have input to read in age range and gender. When I enter input to look at both genders, it does not calculate the total patients or calculate the averages. Any help would be appreciated.
    //prompts user for inputs
    System.out.print("Enter the file name: ");
    System.out.flush();
    filename = console.nextLine();
    System.out.println("What age range would you like to examine?");
    System.out.print("Enter starting age: ");
    System.out.flush();
    agelooking = console.nextInt();
    System.out.print("Enter ending age: ");
    System.out.flush();
    agelooking2 = console.nextInt();
    System.out.println("What gender would you like to examine?\n"
    + "Enter F for Female; M for Male; B for Both genders: ");
    genderlooking = console.next().charAt(0);
    //reads in gender and age range
    while (inFile.hasNext()) {
    //read in gender
    gender = inFile.next().charAt(0);
    if (genderlooking == gender){
    //read in age range
    age = inFile.nextInt();
    // filters logic for age
    if(age >=agelooking && age2 <=agelooking2) {
    totalpatients++;
    //reads in height and weight
    weight = inFile.nextInt();
    height = inFile.nextInt();
    //calculates bmi
    bmi = (weight * weightkg) / Math.pow(height * heightm, 2);
    totalbmi = bmi + totalbmi;
    //takes bmi calculation and filters into 4 categories
    if (bmi < 18.5) {
    underweight++;
    if (bmi >= 18.5 && bmi <= 24.9) {
    normal++;
    if (bmi >= 25.0 && bmi <= 29.9) {
    overweight++;
    if (bmi >= 30) {
    obese++;
    } //end while
    //calculates averages
    averagebmi = totalbmi/totalpatients;
    averageUnderweight = underweight/totalpatients;
    averageNormal = normal/totalpatients;
    averageOverweight = overweight/totalpatients;
    averageObese = obese/totalpatients;
    //writing results to output file
    outfile.println("Results of the BMI analysis for " + practiceName + ": \n\n");
    if (gender == 'm' || gender == 'M')
    Gender = "Male";
    else
    if (gender == 'f' || gender == 'F') {
    Gender = "Female";
    else
    Gender = "Both";
    outfile.println("Patients of " + Gender + " gender in age range of " + agelooking
    + " to " + agelooking2);
    outfile.println ("Number of patients examine: " + totalpatients);
    outfile.printf ("%.1f percent Underweight%n", averageUnderweight * 100);
    outfile.printf ("%.1f percent Normal%n", averageNormal * 100);
    outfile.printf ("%.1f percent Overweight%n", averageOverweight * 100);
    outfile.printf("%.1f percent Obese%n%n", averageObese * 100);
    outfile.printf("Average BMI: %.1f",averagebmi);
    inFile.close();
    outfile.close();
    System.exit(0);
    }

    Because this line will never be true is you are looking for both genders, unless one of the records in teh file was entered as B for gender (Hermaphrodite?)
    if (genderlooking == gender){
    //Change that line to this
    if(genderlooking == 'b' || genderlooking == 'B' || genderlooking == gender){

  • I feel like I'm banging my head against a wall!!!

    I transfered my Itunes libruary to my External hard drive. Everything was going well until I updated my Itunes then I lost everything. The Itunes folder is still on my extenal hardrive. I have changed my itunes media folder location on my preferences but still nothing on my itunes. Can you please help?

    buddhautopia wrote:
    The Itunes folder is still on my extenal hardrive
    what happens if you launch iTunes while holding shift, click on choose library at the prompt, and select the iTunes folder on the external ?

  • Banging my head against the window

    No matter what I do, I have no control over the size of child windows. This is pretty simple, but it's ignoring me totally. Here's what I've got:
    // The container stuff seems to work fine. I'll include it here in case I've done something stupid in it that's affecting the child classes.
    public class MainFrame extends JFrame
    protected JDesktopFrame m_desktop;
    protected JPanel m_panel;
    MainFrame()
    m_panel = new JPanel();
    m_panel.setLayout(new BorderLayout());
    this.setContentPane(m_panel);
    m_desktop = new JDesktopPane();
    m_desktop.setDesktopManager(new DefaultDesktopManager());
    m_panel.add(m_desktop);
    public void AddChildWindow()
    MyChild child = new MyChild();
    child.setVisible(true);
    m_desktop.add(child);
    public class MyChild extends JInternalFrame
    private JPanel m_panel;
    private JScrollPane m_scrollPane;
    private JButton m_button;
    public MyChild()
    super("Title here", true, true, true, true);
    m_panel = new JPanel();
    m_scrollPane = new JScrollPane();
    m_button = new JButton();
    this.setContentPane(m_panel);
    m_panel.add(m_scrollPane);
    m_scrollPane.add(m_button);
    m_button.setsize(200,200);
    m_button.setText("This button is very very tiny for some reason.");
    What I need is the ability to add a single control to this child window (a JTable, if you must know), and be able to move the window around, and resize it, and see the control. If the control is larger than the window, I need to be able to scroll.
    What am I missing? I've tried lots of setSize() methods on stuff, and things like various LayoutManagers at different points, but nothing seems to make any difference. All I see is a child window with a single, tiny button, and if I resize it, it snaps back to tiny. Moving it around doesn't make it stick, either.
    Any help, hints, or examples are VERY appreciated!
    --- Eric

    what is the problem, that the button you are adding wont resize or the window wont resize?
    If the button wont resize it could be that you are using the JScrollPane.add() method which you shouldn't use anyway instead use JScrollPane.setViewportView()
    HM.

  • Banging my head against Spry!

    I'm am creating a job search filter page:
    Loading the XML with all the jobs, then from a selection of
    options filter them down.
    OK, done that. I am using the 'or' filtermode in the
    SpryDataExtensions.js
    You can filter by job and location.
    So you can select to filter by job types:
    'general office' or 'sales' or 'accounts'
    then you can look for jobs at locations
    'thame' or 'aylesbury' or 'benson'
    so it brings back anything in the xml with 'general office'
    or 'sales' or 'accounts' or 'thame' or 'aylesbury' or 'benson'
    What I need it to do is
    'general office' or 'sales' or 'accounts' AND 'thame' or
    'aylesbury' or 'benson'
    so a 'sales' job in 'oxford' will not appear but it only
    returns job types I have selected in the towns I have selected.
    Hope this is clear???
    Have a look and play - you should see what I mean
    http://www.ogmanewmedia.co.uk/xmltest/filterxml2.html
    My question is can it be done in single page?
    If so, fantastic but how?
    Cheers
    Carl (gone for a beer!) Thomas

    Venmore wrote:
    > What I need it to do is
    >
    > 'general office' or 'sales' or 'accounts' AND 'thame' or
    'aylesbury' or
    > 'benson'
    >
    > so a 'sales' job in 'oxford' will not appear but it only
    returns job types I
    > have selected in the towns I have selected.
    From a grouping perspective, I think that you're asking for
    something like this:
    ('general office' or 'sales' or 'accounts') AND ('thame' or
    'aylesbury' or 'benson')
    > Have a look and play - you should see what I mean
    >
    http://www.ogmanewmedia.co.uk/xmltest/filterxml2.html
    >
    > My question is can it be done in single page?
    I suspect that it can, but I think that you might need to
    create a "master" filter that pulls in all of the checked checkbox
    items for the job category and all of the location check boxes.
    pseudo code:
    function jobTypeAndCityFilter(ds, row, index){
    var selectedJobTypes = {};
    // cycle through all of the job type checkboxes
    var atLeastOneJobType = false;
    // Assumes an id of JobTypes on the table with the job type
    checkboxes
    // and that the job type checkboxes have a value set that
    matches the job category
    // leave the value empty for the show all and remove all
    var jobTypeCBs = Spry.$$("#JobTypes
    input[type=checkbox][value~='']");
    for(var i=0; i< jobTypeCBs.length; i++){
    if(jobTypeCBs
    .checked){
    selectedJobTypes[jobTypeCBs.value] = true;
    // assumes that you add a value to each checkbox that matches
    the job type to filter on
    atLeastOneJobType = true;
    var categoryFound = false;
    // if no job types found, any category will do
    // or if current row category is one of the checked job types
    if(!atLeastOneJobType || row.Category in selectedJobTypes){
    categoryFound = true;
    var atLeastOneCity = false;
    var selectedLocations = {};
    // Assumes an id of Locations on the table with the location
    checkboxes
    // and that the location checkboxes have a value set that
    matches the location in the dataset
    // leave the value empty for the show all and remove all
    var LocationsCBs= Spry.$$("#Locations
    input[type=checkbox][value~='']");
    // cycle through all of the city checkboxes
    for(var i=0; i< LocationsCBs.length; i++){
    if(LocationsCBs
    .checked){
    selectedLocations[LocationsCBs.value] = true;
    atLeastOneCity = true;
    var cityFound = false;
    // if no city filters found, any location will do
    // or if current row category is one of the checked job types
    if(!atLeastOneCity || row.Location in selectedLocations){
    cityFound = true;
    // If we have found an appropriate category and an
    appropriate city, return the row.
    if(categoryFound && cityFound ){
    return row;
    } // end function
    // Called onclick of each of the job type and locations:
    function HandleJobCityFilterChange(){
    // remove in case filter is already present to prevent
    // multiple applications of the same filter, then readd it
    dsDonuts.removeFilter(jobTypeAndCityFilter);
    dsDonuts.addFilter(jobTypeAndCityFilter, true);
    // Example checkbox:
    <input name="GeneralOfficeCB" type="checkbox"
    value="General Office" onclick="HandleJobCityFilterChange();" />
    I think you'll need to call the HandleJobCityFilterChange
    function at the end of your set/remove all options. The above
    method simply polls all of the job categoy checkboxes and the
    location checkboxesAnyway, this was all hacked together real
    quickly as I've not done much with datasets, but in a very very
    quick test using Thame and Sales, it appeared to work correctly to
    show only one job: reference 10762
    Hope that helps you on your way, but from here, I'm not sure
    I'll be able to help much.
    Danilo Celic
    |
    http://blog.extensioneering.com/
    | WebAssist Extensioneer
    | Adobe Community Expert

  • Banging by head against the wall over FlashVars

    OK. This was supposed to be a quick few minute edit that has consumed hours. There is something wrong but I can't find it.
    All I want to do is read a number in from a FlashVar. These are the relavent code snippets.
    HTML
    <param name="FlashVars" value="pid=1" />
    AS3
    var keyStr:String;
    var valueStr:String;
    var paramObj:Object = LoaderInfo(this.root.loaderInfo).parameters;
    for (keyStr in paramObj) {
         valueStr = String(paramObj[keyStr]);
         if(keyStr == "pid") strFlashVarPID = valueStr;
    if(valueStr=="1") pid=1 else pid=2;
    I am always getting a pid=2.
    Why? How can I troubleshoot this? I can't see trace values when viewing the SWF from a web page.

    Here is all the HTML code:
              <div id="flashContent">
                   <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="715" height="800" id="my" align="top">
                        <param name="movie" value="my.swf" />
                        <param name="quality" value="high" />
                        <param name="bgcolor" value="#000000" />
                        <param name="play" value="true" />
                        <param name="loop" value="false" />
                        <param name="wmode" value="window" />
                        <param name="scale" value="showall" />
                        <param name="menu" value="true" />
                        <param name="devicefont" value="false" />
                        <param name="salign" value="" />
                        <param name="allowScriptAccess" value="sameDomain" />
                        <param name="allowFullScreen" value="true" />
                        <param name="FlashVars" value="pid=1" />                    
                                    <!--[if !IE]>-->
                        <object type="application/x-shockwave-flash" data="my.swf" width="715" height="800">
                             <param name="movie" value="my.swf" />
                             <param name="quality" value="high" />
                             <param name="bgcolor" value="#000000" />
                             <param name="play" value="true" />
                             <param name="loop" value="false" />
                             <param name="wmode" value="window" />
                             <param name="scale" value="showall" />
                             <param name="menu" value="true" />
                             <param name="devicefont" value="false" />
                             <param name="salign" value="" />
                             <param name="allowScriptAccess" value="sameDomain" />
                             <param name="allowFullScreen" value="true" />
                             <param name="FlashVars" value="pid=1" />
                        <!--<![endif]-->
                             <a href="http://www.adobe.com/go/getflash">
                                  <img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
                             </a>
                        <!--[if !IE]>-->
                        </object>
                        <!--<![endif]-->
                   </object>
              </div>
    By the way I am able to get the code to work if I put the pid on to the url like this:
    <object type="application/x-shockwave-flash" data="my.swf?pid=1" wi...
    I may just the URL for now but I want to know why the param is not working.

  • K7N2 Delta MS6570 and JUSB2 header.

    I have a K7N2 Delta MS6570 Mobo and when I first obtained it I installed it into an Antec Sonata case. This has, among others, two USB sockets on the front. These can be connected by two sets of four separate connectors. I tried using these but found that, although the USB connectors on the front  were recognized, a message followed stating there was a problem. I then decided to connect the supplied D-bracket and these worked with no problems. ( not bothered with Bluetooth) I then made further attempts to use the front connections but in spite of checking everything... no go. So I gave up as at that time I had no real use for front connections. Lately I find it would be more convienient to be able to use the front USB connections and have made further attempts but with no success.
    I have noted that the manual on page 2-22 the JUSB2 header shows that pin 10 is for USBOC, which I believe is an over current pin but with negative logic.. ..???? When I use the front connections this pin is not connected and as far as I can see this is the only difference between front and D bracket.
    I would be very grateful for any suggestions to overcome me problem. Many thanks.

    I think I have now tried everything and this is the present position.
    Using the front USB sockets fed from JUSB2 some USB devices will work OK, therefore assume connections are correct. However when I try the use a USB flash drive  I get message "USB device not recognised". I have tried two devices with same results. If now change over to feeding the D-bracket from JUSB2 both USB flash drives work OK from there. They also work OK on another computer.
    Why oh why is there a problem using the front US sockets with some USB devices?

  • MSI K7N2 Delta ILSR Questions & RAID Promise FastTrak Controller Issue

    I have recently rebuilt my system replacing the MSI KT3 with an MSI K7N2 Delta. I have been impressed with the features and stability of the system, however, I have some questions that I hope some of you that have more experience of this board can answer:
    1. I am using the AMD Athlon XP 2200 (and all the other components including the Lian Li case) which I was using on the KT3 board. The CPU temperature is around 45 degrees C but on the KT3 it was only 35 degrees C when idle. Any ideas ? The heatsink is definetly mounted properly. The temperature did drop by 10 degrees C when I flashed the
    BIOS to fix the known CPU temperature issue but I think its still high.
    2. I do not have any serial ATA devices or anything connected to IDE3 channel and during the BIOS boot up I get the message:
     "No drives attached to FastTrak Controller. Bios Not installed."
    Is this correct ? Should I be getting this message ?
    I would like to disable the onboard Promise Controller since it is taking up resources and it slows down the boot speed (although only slightly). The MSI website says that the onboard RAID controller can't be disabled. I think this is poor design. Does anyone know if this is going to be addressed in future BIOS releases ?
    3. Which of the USB ports are USB 2.0 and USB 1.1. I thought it was rather strange that only 2 of the 4 ports on the header actually active.
    Many thanks for your help.
    Rupesh

    First off your temp is ok on that board. If you have not loaded the onboard raid driver do so and it is something you have to suffer with on the MSI board. All of your USB ports should run at USB 2.0 and you also should be able enable all of them in the bios.

  • K7N2 Delta-L deteriorating cmos resets

    Hi
    System info :
    K7N2 Delta-L mobo
    XP2500 Barton
    2 x 256mb Samsung (Korean) PC3200
    Coolermaster CP5-8JD1F-0L hsf
    PNY ti4200 128mb
    Maxtor 40g 7,200 hd
    Pioneer DVD
    LG CD-RW
    2 x 80mm case fans
    1st psu 400w generic
    2nd psu Thermaltake 420w
    All installed with first psu, and XP pro. Running no problems. Tested cpu at 11 x 200 (not straight off, gradually built up to it, watching for stability or temp problems), was running fine at stock voltages, ran 3d mark 2001 successfully. Backed things off to 10.5 x 200 to ensure stability. Re-ran 3dmark 2001, then ran prime95 overnight (8+ hours), with no problems at all. Temperatures were fine, I set the cpu temperature alarm well into the safe side in the bios (55deg). The highest cpu temperature PC Alert displayed, was 29 deg.
    Updated the bios to 5.3, rebooted and checked the settings in the bios, went back into XP, no probs, re-ran 3dmark, went online, and started to play Dark Age of Camelot. After somewhere around 2 - 3 hours, the display started to "stutter", and the mouse movement became erratic. I logged off, checked PC Alert temps, all was fine, but 12v line had gone down to 11.56v. Rebooted to check the volts in the bios. They were down too, also the blue line selector had acquired a mind of its own, randomly headed anywhere when next item was selected, so I switched off, and guessing the psu to be maybe a bit inadequate, ordered the Thermaltake 420w to replace the 400w generic.
    The Thermaltake arrives, install and fire up, after clearing the cmos to start again, and set up with basics. Voltages were all very satisfactory. In the meantime I had checked the cpu seating and thermal compound, and there had been no problems, and I also took the heatsink off the ti4200 to check thermal compound, cleaned and re-applied (as I did with the cpu).
    On the fire up into XP, got a bsod with file corruption notice. Booted into Me install cd, formatted the drive, loaded smartdrv, and started a new XP install. The system locked up after a successful install, about 2 minutes into the worktop (went to use windows explorer to access drivers, etc., and it froze). Had to use the reset button, and it would not post. Cleared the cmos, and it posted. Reflashed the bios to 5.2 that was on the distribution cd just in case.
    Since then, it has been a catalogue of failed installs, lockups and increasingly difficult clearing of the cmos. It is now at the point that a cmos clear does nothing (with the other pins at 100 and safe mode), and it fails to post. I get to the 3 lights flashing on the keyboard, and that is it.
    I removed the board from the case, just in case I had hallucinated and missed a riser or something, but the risers were in the right place, and each had a fibre washer on top. Tried booting with the board out of the system, with just the cpu/hsf/memory/graphics, with no joy, also tried with a Gf 4 mx 440, and also no joy.
    In retrospect, I don't think the 400w psu was too bad to drive the system, but it was worth being cautious - it has driven another system with no problems since. The cpu was performing great, as was the memory. There was no problem with the hsf or agp card. Memory was tried single stick in each memory slot (and all of it had flown through 3dmark and prime95 previously).
    I am tempted to suspect something is adrift to do with the Athlon powersaving mode that has been mentioned in these forums. Other than that, there was something a bit weak on the mobo, and it has slowly bitten the dust.
    Any suggestions gratefully received.

    PS.
    The case is one of those Superflower Midi towers, with good case volume. Airflow was quite nice with the 2 extra fans, one at front pulling in, the other at rear extracting.
    The fan on top of the heatsink, is the standard Coolermaster, which overhangs the heatsink either side, with the bonus of blowing a nice airflow over the northbridge.
    The 400w generic psu had 2 fans, which were also pulling a fair airflow through the case. I didn't get any indications of anything even aproaching overheating.

Maybe you are looking for