Bank Account Number not appearing in FF67

Hi Experts,
I created house bank and creted bank key, Bank A/c number also but iam unable to view Bank account number in FF67
Please reply urgent.
Regrds,
Maya.

Dear Maya,
Can you Elaborated your Problem I didn't get you.
I tried FF67 it is showing.  Bank Key
                                          Bank Account (Bank Account Number)
If you satisfy this answer please give me points
Thanks & Regards
shankarsap

Similar Messages

  • Bank account number not valid in XK02

    Hi,
    I get a error bank account number not valid.
    Country Netherland (NL)
    IBAN - NL30CITI0105623879
    SAP propose bank account as - 0105623879. But system shows error that "Invalid bank account number".
    Debugging shows Bank account number is not valid.
    Checked in many sites, it shows that IBAN is correct. But when generation back to account number, SAP says it is wrong.
    Your suggestion is hightly appreciated.
    John

    Hi,
    Please refer SAP note 1333154 - IBAN NL: Account number not valid
    Solution
    The standard solution is to deactivate the validity check for Netherlands, or to customize the message type of the message AR 124, so that for instance a warning will appear instead of an error.
    If you still want to have the validity check active and get a warning only for invalid or "invalid" Dutch account numbers (the message type customising is unfortunately not country dependent), activate the user-exit 002 in program SAPLSSRV (function EXIT_SAPLSSRV_002).
    Then apply the attached correction. The include ZXF10U02 will then contain program code with the following functionality:
    In case of a dutch account number handle the message AR124 as a warning.
    Regards
    SM
    Edited by: shanumonu on Feb 6, 2012 6:47 AM

  • Bank account number not reflecting while creating invoice some parties

    Hi All,
    We are facing following issue while creating invoice's for some particular parties.
    Bank account number is not reflecting while creating invoice at invoice work bench from front end. Bank account details are properly attached at party site level.
    Kindly guide us regarding this.
    Thanks,

    Hi Team,
    If you are getting XXXX in place of Bank number then the issue is at (Setup > Payment >Payment Adminstrator).
    Log into Payments Setup > Shared Setup > System Security Options. Now you will find "External Bank Account Masking Setting" & Number of Digits to Disp . Now provide the numer of digits to display.
    Thanks
    Vinod K

  • Remit-To Bank Account Number not seen in payment time??

    remit to bank account number show in invoice level but at payment time it is not showing

    Hi,
    Remit to Account number is available in the Invoice under Scheduled Payments TAB ?
    In the supplier configuration, under the Banking Details what is the priority stated for the respective bank account .... it should be 1 ...
    Also check your Payment workbench form is updated with the latest version ..120.223.12010000.157 or above..
    References
    Remit-To Bank Account Information Is Not Defaulted Correctly In Payment Form [ID 1088793.1]
    Regards,
    Ivruksha

  • Vendor Bank account details not appearing in DME file

    Hi SAP gurus,
    We have maintained bank information for vendor in the master record and also configured the field FPAYH-ZBNKN in the DME structure to retrieve bank information and pass to the DME file.However the values are not passing to the DME output file. Please let me know if any config is missing.
    Answers will be rewarded with good points
    Thanks
    Ravi

    Hi Ravi,
    This is not reply to ur query but, we are implementing the same thing. I have designed the DMEE tree for the format required by the bank. I am able to run the F110 succesfully but after going to env->pay med->DME adm i get the FDTA screen with the message 'no records found'. Can u guide me in this case. I have done all the settings in the customization.
    But when i run the program SAPFPAYM with the proper required values of payment run i get the overview screen in the overview screen when i dbl click the item under output list. I dont get download option in EDIT. In the spool Request when I go to forward and export the file, the file which I get is in different format.
    pls. guide

  • Bank Account Number appears as stars in the payment window

    Dear Folks,
    After greetings,
    I have an issue regarding the bank account prefix number, it appears as stars in the payment page while i am trying to pay for any invoice and select the bank accounts to pay from it, all the bank accounts numbers prefix appears as i said as stars, any suggestions ?!
    Thanks in advance,
    Ahmed Fazary

    Hi,
    In R12, the masking and unmasking of external bank account numbers is managed through the system security options.
    Navigation: Payables Manager --> setup --> Payment --> Payment Administrator --> System Security Options
    In the screen, under the heading, Payment Instrument Masking, there are options to setup and control the masking for credit cards and external bank accounts.
    Please note that you have to wait for the concurrent request (which will be launched when you save) to finish, and only then will you see the masked bank account numbers on the Banking Details window of the Supplier master form.
    Regards,
    Raju.

  • House Bank Account number is not allowing to update

    Hello Expert,
    I am using SBO 8.8 PL 15 and i an trying to update House bank account number but system is showing message as below
    [House Bank Accounts - Acct No.] , 'Field cannot be updated (ODBC -1029)'  [Message 131-183]
    I have not attached House bank in company details-->Basic Initialization and BP are also not mapped with any House Bank in Payment System Tab.
    Is there any other form where we require to unlink House bank
    I want to change account number for one of the bank branch.
    Regards,
    Bhavank

    Hi Bhavank,
    Check you have enter any Transaction create For this Bank
    Go to Administration / Setup / House Bank Accounts / Check G/L Account / Click on orange arrow / here Transaction are appear
    If Transaction are to appear so not any kind of possibility to change Bank Account Number.
    For that you have to nulify the transaction then you can do it. but this is not advisable to nulify transaction.
    Otherwise you have to create new Account & Transfer Balance OLD Account to NEW Account.
    Thanks,
    Srujal Patel
    Edited by: Srujal Patel 77 on Jun 29, 2011 6:27 AM

  • Bank account number is not valid

    Hi All,
    Can you please help when maintaining bank details of vendor master at the time of entering bank account number getting following error
    Bank account number is not valid
    Message no. AR124
    Please help.
    Thanks

    Note 572022 says
    Summary
    Symptom
    Although you have already implemented Notes 507186, 144764, and 310988, the system generates message AR124 (Bank account number is not valid) during the check of a Swedish bank account number.
    Other terms
    FI_CHECK_BANK_ACCOUNT_SE, FI_CHECK_BANK_DETAILS, AR124, BANK_ACCOUNT_CHECK, bank account number, Sweden
    Reason and Prerequisites
    For the check of the bank account number in Sweden, there is no unique check algorithm. The banks use different check procedures, which are not published and cannot therefore be implemented. As a consequence, you may use bank account numbers which are indeed correct, but cannot be recognized as correct.
    Solution
    If the system generates error message AR124 during the check of a bank account number, you can define this message as a warning message in Customizing (transaction OBA5). You may also completely deactivate the check of the bank account numbers for Sweden (transaction OY17, deselect the 'Bank data' field).
    thanks
    G. Lakshmipathi

  • Bank account number is not displaying in Payslip.

    Hi
    Please advice for the below mentioned issue: 
    Bank account number is not getting displayed in payslip. What i have observed is there are two entries coming in BT one is correct entry of wagetype /559 and another entry generating is of wagetype /470 where bank key is displaying 12345 and no account is coming.
    Screenshot attach:
    Please advice for the same on priority, what i am missing in config regarding the account number display on payslip.
    Regards
    Aparna

    How did you do the confic in PE51 to capture the bank account number?
    T-Code PE51 -> give your form name and then double click on single field , make follwing entries Table = XBT, Table field = BANKN, Identifier = /559

  • Few countries bank Account Number is mandatory and for few others it is not

    For few countries bank Account Number is mandatory and for few others it is not mandatory in the Payment Transaction Tab in Bank Details of Customer.
    My question is that why will anyone not fill bank account number when he has given Bank Key and other details.
    Is it related to Payment by other methods , other by Cash.

    Hi Ranjeet,
    You should ask this question to the person who has information about bank details but not process them.
    Yes bank account is related with payment transactions. If you want you can make this field mandatory in customizing;
    SPRO-Financial Accounting-Accounts Receivable and Accounts Payable-Customer Accounts-Master Data-Preparations for Creating Customer Master Data-Define Account Groups with Screen Layout (Customers) or Define Screen Layout per Company Code (Customers) or Define Screen Layout per Activity (Customers)
    You can also set message F2813 (Enter an account holder) as error in customizing;
    SPRO-Financial Accounting-Accounts Receivable and Accounts Payable-Customer Accounts-Master Data-Preparations for Creating Customer Master Data-Change Message Control for Customer Master Data

  • AP - Invoice Workbanch : Remit-To Bank Account Name and Remit-to Bank Account Number is not available

    AP - Invoice Workbanch : Remit-To Bank Account Name and Remit-to Bank Account Number is not available
    Fields are not available.
    What should I do to change values (activate LOV)
    Regards
    Witek

    Hi Witek,
    Please refer the below note ID:
    Remit-To Bank Account Number Field Not Defaulting On Payment Run From Invoice Header (Doc ID 1360326.1)
    Regards,
    Viki

  • HT204088 i have a charge from apple and i did not authorized it and it appears in my bank account but not in my recent purchases i want to know whats going on

    i have a charge from apple and i did not authorized it and it appears in my bank account but not in my recent purchases i want to know whats going on

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple
    How much is the charge ? Have you added or changed your credit card details on your iTunes account ? If you have then each time that you do so a small temporary store holding charge may be applied to check that the card details are correct and valid and that it's registered to exactly the same name and address as on your iTunes account - it should disappear off your account within a few days or so.
    Store holding charge : http://support.apple.com/kb/HT3702

  • Bank account number is invalid

    I'm try create a new business partner in EP, in standard menu "Account Management", and "Accounts". When I fill bank data appears the next message:
    "Bank account number is invalid"
    anyone can help me?
    thanks in advance,
    eva

    It may not be PC-UI issue...It looks like customizing  issue. Check in SPRO...

  • FI12 - Swiss/Switzerland Post Bank Account Number

    Hi All,
    Please will someone help be to overcome the following problem:
    My UK client has a subsidiary in Switzerland (ctry code CH) & I'm creating some dummy demo data for a presentation.
    After creating a company based in Switzerland, in FI12 I created a house bank with currency EUR. After entering Account ID and currency EUR I cannot enter a dummy bank account number because I do not know the correct format.
    Error message 'Hyphen is in incorrect position in post office bank current account no.' AR117 appears.
    I checked in NetWeaver- Check country specific checks for 'CH'. There is a check for Post bank account number for maximum value length, without gaps u2013 but there is no mention of  hyphens.
    Please will someone tell me where I can check where the hyphen(s) should be in the Swiss post bank account number.
    Apologies for posting such a long message and thanks in advance.
    Melinda

    Hi Melinda,
    Please check if you have note 1248767 implemented. Also check the following information:
    A Postfinance account number has a structure similar to 12-123456-1,
    so there is always at least one separator.
    Should the account numbers be presented in the non-post format, which
    means a string up to 16 characters, the bank in the bank master must
    not have the 'Postbank' sign activated (BNKA-XPGRO). Or the account
    number validity check has to be deactivated for Switzerland
    (transaction OY17, country CH, 'Further Checks', parameter 'Bank data').
    There is not know new requirement regarding the handling of Postfinance
    account numbers. Without the separators the validity check would not
    be possible.
    If you need to write the account numbers in a DME file without the
    separators, and do not want to deactivate the validity check,
    you can enhance the DME format to filter it out.
    Also check note 109589.
    kind Regards,
    Fernando Evangelista

  • Hide or Encrypt Bank Account Number

    Hey Guys,
    The client has a requirement in FK03 to hide/encrypt the bank account number in the bank details table in the tcode FK03. 
    When using the transaction FK03, I am having a problem with hiding or encryting a user's bank account number.  When you execute the FK03 transaction, select a vendor and go to the next screen, you are then taken to the Payment Transactions Screen.  User bank account information is displayed on this screen.  I do not want the entire table hidden, but I am unable to hide or encrypt the bank account number.  I am unable to find any authorization objects to control this specific field.  Does anyone have suggestions on how to implement this?

    If all users except the accounting department may not see the number, and the accounting department must be able to see the number from the standard transactions in this application area (e.g. FK03, XK02, etc), then you will be best off looking for an enhancement point via which you can add your own coding.
    The easiest and least intrusive way in my opinion would be to find one which affects only the payment transactions screen but regardless of the transaction context, and if the user fails an authority-check of your own invention - then modify the internal table to replace the real number with a bogus one.
    But remember that if the user can debug in display mode, then they will display the internal table before you modify it, unless you DEFINE it in a macro... (but that is again intrusive, and there still are ways).
    If you choose the encrypt / decrypt route, then you will have to fight with the field types of the bank table and can still make the same mistakes... except that someone looking directly at the table via a data broowser will not see much either... (until they find the decryption function and run that).
    Please also a take a look at [SAP Note 1257033 - Cookbook: Modification/enhancement for standard SAP system|http://service.sap.com/sap/support/notes/1257033] before proceding with an enhancement.
    Cheers,
    Julius

Maybe you are looking for