Bank and address infotype connection
Hi Gurus,
Would like to know where I can find if bank and address connection has been broken if bank and/or address has been updated. My questions stems from the fact that when payroll has run it did not capture the old/new address data in the interface which will be sent to third party payroll processor.
Appreciate your advise.
Thanks,
MVM
Hi,
I hope it's helpfull.
For Switzerland:
http://www.six-interbank-clearing.com/DE/tkicch_onlineservices_downloadbcbankmasterdata.htm
Germany:
http://www.bundesbank.de/zahlungsverkehr/zahlungsverkehr_bankleitzahlen_download.php
Similar Messages
-
Bank mailing address iTunes connect?
I dont understand what I'm supposed to fill in here:
My bank's address... ? It's not like they've got one address. They've got tons of different offices. What exactly is meant by this?What is branch id and account type?
I called my bank today and they said they couldn't help me. They said all that should be needed is the swift and iban addresses.
A domestic bank may only need swift/iban, but for wire transfers that originate with a bank overseas, it is routine to require more information. Just don't panic over the specificity...see below.*
• Account type should be straight forward.
Checking account? Savings account? You should know that already, unless you are attempting to use some sort of special account that is tied to investments, annuities, etc. If you want to check on anything with your bank, verify that it can accept incoming wire transfers from overseas as well as domestic.
Do you use checks?
Examples other (International):
Wire Routing Transit Number: 121000248
SWIFT Code: WFBIUS6S
Bank Name: Wells Fargo Bank
City, State: San Francisco, CA
Your Account Number: Your 10-digit account number
Title of Account: The name of your account as it appears on your statement
• Branch Id/Branch field.
This is sometimes the name of the branch, or potentially a nearby intersection or other number...*don't worry too much about this one...the SWIFT, routing, and account numbers should be all that is needed to actually get things done. Just don't attempt to leave it blank. -
Personal Data and Address for Country Grouping 99 - error on ESS
Hello All,
I have configured personal data and address infotypes in ESS for the country grouping 99.
I have done the following config
1. Assign Screen Structure to Infotype Versions
2. Define Active Subtypes and Use Case
3. Define Country-Specific Applications
4. Created a Z service and then assigned this service to subarea.
I made use of US service and copied to z.
after the config when i log on to the portal and check the personal data or address links am getting the error:
An exception occurred that was not caught., error key: RFC_ERROR_SYSTEM_FAILURE
the st22 dump is
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED_NO
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
I searched in the forum but still am unable to figure it out where i am wrong or missing any config or any other technical error.
Can any one pls help mehttp://wiki.sdn.sap.com/wiki/display/ERPHCM/HowtoReuseCountryspecificapplicationsforMolga99
check the steps in above link
and also please check with some standard country like india 40 or usa 10 what use cases and time constraints have been set
INFTY - Now specifies the infotype.
USECASE - Corresponds to the value in the table V_T7XSSPERSUBTYP.
ZEITB - Corresponds to the value in the table V_T591A (V_T582A).
Page 2
SUBTYPE_TAB - Here, you will find a list of the subtypes that have
already been checked and that are correct.
You then find the subtype in METADATA-SUBTY. However, you must move up
one subroutine in the call hierarchy in advance to do this.
This data makes it easy for you to identify the infotype and the subtype
and correct the inconsistency by making entries in the tables mentioned.
ie
T_cd:SE24 >>CL_HRPA_PERNR_INFTY_XSS >> CHECK_USECASE_WITH_CONSTRAINT >>
for
usecase = A1, A4, B1, B4 (table V_T7XSSPERSUBTYP)
you need to have
zeitb = '1' OR zeitb = '2' (table V_T591A)
for
usecase = A2, A3, A5, B2, B3, B5
you need to have
zeitb = '2'
for
usecase = A6, B3
you need to have
Zeitb = '3' -
My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly. -
I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2. I am working for a not-for-profit organization. Is there a special pricing plan for non-profits, similar to the plans for students, small business, etc? Thanks for whatever help you can give me. (P.S. As a potential customer and past user of Adobe products for 15 years, I find it INCREDIBLY FRUSTRATING that I cannot speak with any Adobe representative, but am continually re-routed instead to a public forum to get what I hope will be accurate information. Not good, Adobe. Your products are amazing. Your customer service leaves a lot to be desired. I don't mean that with disrespect, but as honest feedback.)
Hi bookchic
Thanks for your feedback.
Non-profit pricing is available to eligible institutions via the VIP program which is sold by resellers - see Eligibility guide
For details of resellers please check here: Adobe Platinum Partners – Value Incentive Plan
If you wish to purchase an individual plan via Adobe.com the country of your Adobe ID will determine which site you order from.
Kind regards
Bev -
I am looking for a very simple home accounting application. iBank seems to not be very intuitive and it has more features than I need. I am looking for the ability to create a budget and keep a bank register with the ability to connect to my bank and do updates.
I have a small business, I chose Quickbooks because anything else cost much more. That triggered the hiring of a bookkeeper who knew how to use it. It was not the cheapest choice after all.
-
How to connect a Razr to iCal and Address Book w/ bluetooth
How to connect a Razr to iCal and Address Book w/ bluetooth
Hello. I am going to post this in multiple forums because I searched but couldn't find anything on how to sync my Razr with Tiger's iCal and Address Book so this is the How To.
First, download the software Pacifist which can be found on www.versiontracker.com. After the download, put your Tiger DVD into the drive, open the packages in Pacifist, and do a search for iSync.app. Drag that app into your Applications folder. Go to www.versiontracker.com again, and download the iSync 2.1 update. Run that update, and after the restart, use the bluetooth setup to connect to your phone. After pairing, the bluetooth setup should say that you can sync your contacts and ical list. Go to your Applications folder and find iSync. Using this application, you can now adjust the settings for your iCal and Address Book apps.
Good luck!Hi,
There's a dedicated forum for Server customers.
Good luck,
S. -
http:/I'm using 4th gen IPOD touch and the wifi can't connect to my home NTWK, it sends me to a far distant IP ADDRESS and can't connect. a building public NTWK is wifi connectable, any ideas how I can resolve this WIFI issue??? TY
[email protected]Do other devices connect to your router?
What do you mean by distant IP address?
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
-power off and then back on yur router
- Reset Network settings: Settings>General>Reset Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
MacBook Airport card has lost its IP address and won't connect to my network
The Airport card on my MacBook has lost its IP address and will not connect to my network. It worked fine until about two or three days ago. Network Diagnostics says that the Airport now has a self-assigned IP number and will not connect to the Internet. I can't find any info anywhere that tells me how to restore the IP number, and I don't get how it can have a self-assigned number and not connect. I have AT&T U-Verse, and my iMac desktop and two iPhone 4s connect with little difficulty. The MacBook is three years old, and AppleCare just expired two months ago. I'm still running 10.6.8 on both machines. I found an article saying that sometimes DHCP leases expire, but my desktop still works ifne, and I've had both connected to the same network since the same time. The artcicle said that more than one machine can share an IP address, so I wanted to try to enter the desktop IP address into the laptop, but I can't find a way to do so, either. Any thoughts?
Have you tried making a New Location for each yet? The Automatic one get confused easily.
Some "nix" to try when it happens also...
sudo ipconfig set en1 BOOTP;sudo ipconfig set en1 DHCP
sudo ifconfig en1 down;sudo ifconfig en1 up
Sometimes having an all OFF Location can help, thanks to Gnarlodious...
http://gnarlodious.com/Computer/MacOsx/WiFi -
Log connection attempts and source IP address for connections that fail/timeout on RADIUS
How can I log the connection attempts and source IP address for connections that fail RADIUS authentication? I'm using RD Gateway on 2012 R2 in conjunction with Azure Multi-Factor Authentication Server on another 2012 R2 server. When a user fails
multifactor authentication or the authentication times out, all I get is Security event 6273 on the RD Gateway that the radius server did not process the request, and only the radius server's IP is logged. There's nothing logged in TerminalServices-Gateway\Operational
because the TS Gateway hasn't yet processed the connection attempt (all auditing options for RD Gateway are enabled). The MFA/Radius Server is only logging the connection from the TSGateway - it doesn't know the original client's IP address.
I'm looking for the equivalent of an IIS log - somewhere the RD Gateway should log the initial HTTPS connection attempt and the source IP address of the client. I need to be able to track down potentially fraudulent login attempts.Hi,
Thank you for your posting in Windows Server Forum.
This error might be caused by one of the following conditions:
• The user does not have valid credentials
• The connection method is not allowed by network policy
• The network access server is under attack
• NPS does not have access to the user account database on the domain controller
• NPS log files or the SQL Server database are not available
To perform these procedures, you must be a member of Domain Admins.
Please check for more information:
Event ID 6273 — NPS Authentication Status
http://technet.microsoft.com/en-us/library/cc735399(v=ws.10).aspx
Hope it helps!
Thanks.
Dharmesh Solanki -
My mac air OSX10.8.5 won't connect to the internet. It says it has a 'self assigned IP address and therefore cannot connect to the internet'. Network diagnostics is unable to the solve the problem. It happened suddenly for no reason and now I cannot connect except by typing in the configuration settings manually. Please help me!
Use the Airport Utility or log into your wireless device via http and ensure the DHCP/NAT service is enabled. If accessing via HTTP, you will need to manually set an ip within your local subnet (eg: 192.168.0.x).
-
I am trying to log into the itunes store for the first time and it asks me to review my account so I do but every time I get to the bit where you fill in your bank details and address it tells me my payment method was declined and that its not valid?
Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.
-
my keyboard and mouse are connected via bluetooth to my iMac, both work. but under network preferences bluetooth PAN is showing with a yellow dot and no ip address. is this normal?
Yes.
Bluetooth PAN refers to a BT personal area network
http://en.wikipedia.org/wiki/Personal_area_network
Barry -
IMac wifi assigns it's own ip address and won't connect
I just install Lion hardwired through my ethernet port, but when I try to use the WiFi connection it assigns it's own IP address and won't connect. I did the exact same process with my other iMac and had no issues.
Any idea what can be causing this problem?Okay, problem resolved. I rebooted my entire ATT Uverse system and the computer instantly picked up the connection.
-
Scan to Email Error Message "cannot connect to server. check server name and address"
I have a HP Officejet Pro 8600 Plus.
I've been using this printer for several months. Now am getting an ERROR message when I try to scan to email that it "cannot connect to server. check server name and address"
I'm not sure how to check this. We can all still print remotely via the internet connection.
Anyone have any ideas?Thanks for the info.,
Did you recently change your operating system or network router that started to cause this error?
Check out this thread - http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Configuring-quot-Scan-To-E-mail-quot-on-HP-...
You may also need to change the printer DNS settings manually - http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-8500-Scan-to-Email-setup-cant-conne...
Thanks
Maybe you are looking for
-
my computers i have is one @ home the other @ work so I want to SYNC between them.
-
How to remove dotted green lines in pages 5.2 documents?
How do i remove dotted green lines in Pages 5.2 documents?
-
How to design HTML Table in ADF
I am new to ADF Tech, I would like to know, how to design the HTML Table Rows and Columns in ADF Ex: <TABLE width="100%" border="1"> <TR> <TD>GUID</TD> <TD>123</TD> <TD>Name</TD> <TD>Mark Antony</TD> <TD>Version</TD> <TD
-
JSP not compiled by JASPER, but OK by hand
If I alter my JSPs, I get the message at the bottom. However, if I go to the work directory and manually do a JAVAC on the _jsp.java file, it compiles fine and I can refresh the page and it is now fine. I'm using a bean, and to make it work by hand
-
Sound problems (load_state:1608: No soundcards found)
Hey there! I am having troubles with my sound devices. It was running very well until yesterday when I did pacman -Syu. Unfortunatelly I can't remember which packages have been upgrade exactly... :-/ The first hint of a problem is that the alsa daemo