Bank changes on Yamaha S90ES

Can anyone please help me with getting Logic to control the bank changes on this beast. I have it controlling the patch changes no problem it is just the bank changes I need thanx

I use the logic environment found at sniney.com.
http://www.sninety.com/S_Mart/
Powermac G4 dual 1.42 Ghz Mac OS X (10.3.9)
Powermac G4 dual 1.42 Ghz Mac OS X (10.3.9)

Similar Messages

Help with controlling Bank changes on Yamaha S90ES from Logic

Can anyone please help me with getting Logic to control the bank changes on this beast. I have it controlling the patch changes no problem it is just the bank changes I need thanx

Yeah, I'm a bit confused too. Assuming your keyboard is sending bank/program changes in the same format is receiving them, Logic will just record your data, and play it back as the keyboard sent it.
Logic is ignoring bank changes sent from my Korg Triton.
So, when recording into a region, you only get program changes, and not bank changes in your recorded data?
However, Logic is sending bank changes to the Triton perfectly.
From playing back a sequence recorded from program changes generated by the keyboard, or using Logic's bank/program change parameters in the instrument parameters?
If I use my keyboard to set the instrument, Logic sets the program,
but the bank is ignored.
I don't understand what you mean by "Logic sets the program".
n the event list, the incoming data looks as standard as could be:
my keyboard is sending a bank MSB and LSB, via events 0 and 32,
followed by a program change,
And you are saying that if you play that back, the keyboard doesn't change sounds correctly?
followed by a sysex "66/48" which I assume identifies the source
of the message (the Korg).
You can't assume anything - it could be anything. It could be a sysex patch dump of the patch, or it could be some mode setting. You'd need to read the keyboard manual to find out what it is.
So the question is: how do I get Logic to PAY ATTENTION to the
darn bank change being sent by my keyboard?
I really don't understand what you mean by "PAY ATTENTION". If you squirt MIDI data at Logic, Logic will record it into a region, and then play it back, as would all sequencers. What should Logic do differently?

How to set bank change in environment for Yamaha S80

Hello,
i started to discover the environment in logic pro 9 after many years. Now i want to set up my external midi devices and have difficulties to adress all banks in my Yamaha s80. It must be customized, but I don't know how. I read the manual of logic pro 9 and the manual of the S80. I hope somebody can help me. Thanks in advance.

To do this you will have to use either make use of portal or BSP application or Dynpro..
It is not possible for the user to change the password just from the web query

MSB/LSB Bank Change Business ???

I'm trying to get LPX to send one of my external MIDI devices a bank change command.
How do I do this?
The manual for my MIDI device (Yamaha MOXF8) says that the way to have the device change banks is by sending the following (Values are in Hexadecimal):
MSB=00, LSB=00 for GM Voices
MSB=3F, LSB=00 for Preset 1 Voices
MSB=3F, LSB=01 for Preset 2 Voices
MSB=3F, LSB=02 for Preset 3 Voices
I understand the meaning of MSB and LSB (Most Significant Byte and Least Significant Byte both making 16 bits).
I guess what I don't understand is how to get LPX to send these commands.
Ideas?
Thanks
-Mike

LSB and MSB are part of the Continuous Controller command set. So you would send LSB and MSG as CC (Controller commands)
MIDI Control Change Messages – Continuous Controllers
MIDI CC Number
MIDI CC
Purpose
MIDI CC
Description
MIDI CC
0
Bank Select
Allows user to switch bank for patch selection. Program change used with Bank Select. MIDI can access 16,384 patches per MIDI channel.
MIDI CC
1
Modulation
Generally this CC controls a vibrato effect (pitch, loudness, brighness). What is modulated is based on the patch.
MIDI CC
2
Breath Controller
Often times associated with aftertouch messages. It was originally intended for use with a breath MIDI controller in which blowing harder produced higher MIDI control values. It can be used for modulation as well.
MIDI CC
3
Undefined
MIDI CC
4
Foot Controller
Often used with aftertouch messages. It can send a continuous stream of values based on how the pedal is used.
MIDI CC
5
Portamento
Time
Controls portamento rate to slide between 2 notes played subsequently.
MIDI CC
6
Data Entry Most Significant Bit(MSB)
Controls Value for NRPN or RPN parameters.
MIDI CC
7
Volume
Control the volume of the channel
MIDI CC
8
Balance
Controls the left and right balance, generally for stereo patches.
0 = hard left, 64 = center, 127 = hard right
MIDI CC
9
Undefined
MIDI CC
10
Pan
Controls the left and right balance, generally for mono patches.
0 = hard left, 64 = center, 127 = hard right
MIDI CC
11
Expression
Expression is a percentage of volume (CC7).
MIDI CC
12
Effect Controller 1
Usually used to control a parameter of an effect within the synth/workstation.
MIDI CC
13
Effect Controller 2
Usually used to control a parameter of an effect within the synth/workstation.
MIDI CC
14
Undefined
MIDI CC
15
Undefined
MIDI CC
16 – 19
General Purpose
MIDI CC
20 – 31
Undefined
MIDI CC
32 – 63
Controller 0-31 Least Significant Bit (LSB)
MIDI CC
64
Damper Pedal /
Sustain Pedal
On/Off switch that controls sustain. (See also Sostenuto CC 66)
0 to 63 = Off, 64 to 127 = On
MIDI CC
65
Portamento On/Off Switch
On/Off switch
0 to 63 = Off, 64 to 127 = On
MIDI CC
66
Sostenuto On/Off Switch
On/Off switch – Like the Sustain controller (CC 64), However it only holds notes that were “On” when the pedal was pressed. People use it to “hold” chords” and play melodies over the held chord.
0 to 63 = Off, 64 to 127 = On
MIDI CC
67
Soft Pedal On/Off Switch
On/Off switch
- Lowers the volume of notes played.
0 to 63 = Off, 64 to 127 = On
MIDI CC
68
Legato FootSwitch
On/Off switch
- Turns Legato effect between 2 subsequent notes On or Off.
0 to 63 = Off, 64 to 127 = On
MIDI CC
69
Hold 2
Another way to “hold notes” (see MIDI CC 64 and MIDI CC 66). However notes fade out according to their release parameter rather than when the pedal is released.
MIDI CC
70
Sound Controller 1
Usually controls the way a sound is produced. Default = Sound Variation.
MIDI CC
71
Sound Controller 2
Allows shaping the Voltage Controlled Filter (VCF). Default = Resonance -
also(Timbre or Harmonics)
MIDI CC
72
Sound Controller 3
Controls release time of the Voltage controlled Amplifier (VCA). Default = Release Time.
MIDI CC
73
Sound Controller 4
Controls the “Attack’ of a sound. The attack is the amount of time it takes forthe sound to reach maximum amplitude.
MIDI CC
74
Sound Controller 5
Controls VCFs cutoff frequency of the filter.
MIDI CC
75
Sound Controller 6
Generic – Some manufacturers may use to further shave their sounds.
MIDI CC
76
Sound Controller 7
Generic – Some manufacturers may use to further shave their sounds.
MIDI CC
77
Sound Controller 8
Generic – Some manufacturers may use to further shave their sounds.
MIDI CC
78
Sound Controller 9
Generic – Some manufacturers may use to further shave their sounds.
MIDI CC
79
Sound Controller 10
Generic – Some manufacturers may use to further shave their sounds.
MIDI CC
80
General Purpose
MIDI CC Controller
Generic
On/Off switch
0 to 63 = Off, 64 to 127 = On
MIDI CC
81
General Purpose MIDI CC Controller
Generic
On/Off switch
0 to 63 = Off, 64 to 127 = On
MIDI CC
82
General Purpose
MIDI CC Controller
Generic
On/Off switch
0 to 63 = Off, 64 to 127 = On
MIDI CC
83
General Purpose MIDI CC Controller
Generic
On/Off switch
0 to 63 = Off, 64 to 127 = On
MIDI CC
84
Portamento CC Control
Controls the amount of Portamento.
MIDI CC
85 – 90
Undefined
MIDI CC
91
Effect 1 Depth
Usually controls reverb send amount
MIDI CC
92
Effect 2 Depth
Usually controls tremolo amount
MIDI CC
93
Effect 3 Depth
Usually controls chorus amount
MIDI CC
94
Effect 4 Depth
Usually controls detune amount
MIDI CC
95
Effect 5 Depth
Usually controls phaser amount
MIDI CC
96
(+1) Data Increment
Usually used to increment data for RPN and NRPN messages.
MIDI CC
97
(-1) Data Decrement
Usually used to decrement data for RPN and NRPN messages.
MIDI CC
98
Non-Registered Parameter Number LSB (NRPN)
For controllers 6, 38, 96, and 97, it selects the NRPN parameter.
MIDI CC
99
Non-Registered Parameter Number MSB (NRPN)
For controllers 6, 38, 96, and 97, it selects the NRPN parameter.
MIDI CC
100
Registered Parameter Number LSB (RPN)
For controllers 6, 38, 96, and 97, it selects the RPN parameter.
MIDI CC
101
Registered Parameter Number MSB (RPN)
For controllers 6, 38, 96, and 97, it selects the RPN parameter.
MIDI CC
102 – 119
Undefined
MIDI CC 120 to 127 are “Channel Mode Messages.”
MIDI CC
120
All Sound Off
Mutes all sounding notes. It does so regardless of release time or sustain. (See MIDI CC 123)
MIDI CC
121
Reset All Controllers
It will reset all controllers to their default.
MIDI CC
122
Local On/Off Switch
Turns internal connection of a MIDI keyboard/workstation, etc. On or Off. If you use a computer, you will most likely want local control off to avoid notes being played twice. Once locally and twice whent the note is sent back from the computer to your keyboard.
MIDI CC
123
All Notes Off
Mutes all sounding notes. Release time will still be maintained, and notes held by sustain will not turn off until sustain pedal is depressed.
MIDI CC
124
Omni Mode Off
Sets to “Omni Off” mode.
MIDI CC
125
Omni Mode On
Sets to “Omni On” mode.
MIDI CC
126
Mono Mode
Sets device mode to Monophonic.
MIDI CC
127
Poly Mode
Sets device mode to Polyphonic.

Vendor Bank changes affect House Banks

Hi,
We noticed that users with Bank Maintenance authorization (TCode FI02) for changing vendor bank details are able to change "House Bank data", e.g. vendor bank is also a house bank -> a user changes the vendor bank details (e.g. SWIFT code for a given bank) in the Vendor Master Change-screen (Change Vendor XK02 -> Payment Transaction -> Bank Data) --> result: it also changes the SWIFT code in the House Bank.
Does someone know what the relationship between Vendor Banks and House Banks looks like (Table BNKA vs Table T012) ?
What would be the best approach to restrict "House Bank Changes"? (e.g. if a user changes a vendor bank that is a house bank as well a Warning message should show up - check against table T012)
Did somebody face the same issue?
Any comments are highly appreciated!
Many Thanks,
Jason

Fields in Vendor Master data can be defined as Sensitive fields, so that when a user changes a field in the Vendor Master data, it will be blocked for payments and also that the changes need to be confirmed by another user.
For Settings SPRO -> Financial Accounting -> AR and AP -> Vendor Accounts -> Master Data -> Preps for Creating Vendor Master data -> Preparations for Creating Vendor Master Data -> Define Sensitive Fields for Dual Control (Vendors)
For Confirmation of Changes -> Easy Access -> Accounting -> Financial Accounting -> Accounts Payable -> Master Records -> Confirmation of Changes -> Single (T-Code FK08)

Bank changes .... Aargh!!!

Hi I have a nord modular G2 and I am having real trouble getting logic to recognise its bank changes. I can change bank on the G2 from logic with no problem. I have defined custom bank messages (in Logic) for the G2 so they identically match the G2's own. I can record and play bank changes, with no problem. And yet, when I change banks within the G2's own navigator logic does not recognise it as a bank change.
Please help, matt

Can you see the bank changes coming into Logic (transport window)?
If yes, you most likely have a problem with your environment. Load up an untitled song (hold down ctrl (or was it option?) while choosing file-> new) and try to record the Bank chenges without any changes to that song. If that works, you should consider making a new autoload.
cheers
Martin

Program/Bank Changes...

Another odd one, I'm afraid.
I have a number of external synths and modules that I control from Logic Pro 8 (all patched up). Most of these respond properly to inline program/bank changes (CC0/CC32/PRnum) - but one doesn't - the WaveStation. It does respond correctly in Cubase, so I don't think there's an issue with the Audio/Midi setup. What is even odder is that if I use the bank/program change lists, the program on the WS changes straight away, so Logic must be communicating the bank/program changes at some level to the WS - it just won't do it as part of a track, with a part just having the three MIDI events in it.
Anyone got any ideas?

Hi,
Make sure you are transmitting on MIDI ch 2. This channel is usually used for changing programs, doing automation, etc...
Cheers

Sending Bank Commands to Yamaha's S90ES From Logic

No success in sending bank commands (MSB or LSB) to Yamaha keyboard. Any ideas?

Firstly, "dir" won't work, "cmd /c dir" will.
Secondly,
import java.io.*;
public class StreamBridge
public StreamBridge(InputStream input, OutputStream output) throws IOException
    int read = input.read();
    while (read != -1)
      output.write(read);
      read = input.read();

IT0009 (bank) change error

When trying to add a new main bank for an employee (infotype 9) using PA30 we receive the following error messages:
Data record 0022222200090      9999123120091116000 is not between 09/17/2009 and 11/29/2009
Data record 0022222200090      9999123120091116000 is not between 11/30/2009 and 12/31/9999
Data record 0033333300090      9999123120091116000 is not between 01/01/1800 and 11/29/2009
Data record 0033333300090      9999123120091116000 is not between 11/30/2009 and 12/31/9999
This is a CE (concurrent employment) employee with assignments 00222222 and 00333333 (note, these are dummy numbers).
Sequence of events was:
Hire action (IT 0), org (IT1) and bank (IT 9) all added for assignment 00222222 with begda 9/17/2009, endda 12/31/9999 on 9/19/2009 using PA40.
Custom hire action, org and bank all added for assignment 00333333 with begda 11/16/2009, endda 12/31/9999 on 11/18/2009, using PA40.
Begda of hire action and org changed from 11/16/2009 to 11/30/2009 on 11/19/2009, but Bank begda was not changed, it remains 11/16/2009.
Now that we want to add a new main bank as of 2/1/2010, we get the error messages above. Weu2019ve tried deleting the 11/16/2009 bank infotype as well as copying it and changing its bedga to 11/30/2009. We get the same messages and canu2019t delete the infotype or save changes.
Based on suggestions in ERP HCM forum on another companyu2019s IT9 error message, we ran utility RPUFIXDS to look for data inconsistencies in infotypes 0, 1 and 9. No inconsistencies were reported.
No relevant SAP notes found.
Any suggestions appreciated.

Thank you for suggesting transaction PU90 "Delete applicant data", however this person is not an applicant. We get message "Applicant number not yet assigned Message no. PA017" when we try to use PU90.
This led us to transaction PU00, "Delete Personnel Data". However since the person has already been paid, we get message "Personnel number has already been accounted Message no. PG427." There is a way to override this, but we are reluctant to cause more data consistency problems. We may test this option if no others arise.
Thanks again for responding!

House Bank change

Hi All!
I have a user that has a new house bank they have set this up in SAP, However when they run the payment wizard, the old bank information is still present. I am at a loss as to how to correct this issue. Are they going to have to go into every BP they have and change it manually?
Than you in advance for your assistance.
Chris Sorensen

Hrmm okay...
You should be able to use DTW to update the House Bank for Business Partners, instead of doing it one by one.
Kind Regards,
Nick Lakasas

Hous bank changes & Bill of Exchange

Hi Expert,
We have changed our house bank.
2 payment methods (for the bill of exchange) were overlooked.
In transaction FBWD, we now see bills of exchange which are linked to the old bank.
Do you know how we can transfer them to the new house bank?
Thank you for your feedback.
Kind regards,
Linda

Dear Lolu jo
I have assigned the special gl account as you said but it is giving errors. I have defined accounts as follows :
Reconciliation account type k 100501 under sundry creditor
Alternative recon ac type k for boe payables K 100591 under sundry credito
Alternative recon account type k for statistical posting 200169 under current assets
In OBYM, for k s i have assigned 100501 and 100591
for automatic offsetting entry check/boe i have assinged ks : 200169.
for end user steps i am doing F-43, then when i am doing fbw6, system is giving error that sga ks account determination is missing.
Kindly inform me whereva I am wrong
Regards
keyin.12345

Basic question: sending patch, bank changes in Logic Pro 7.1

I find that when I use Logic's Track Mixer to assign patch and bank information to a midi track, my sound modules (usually an old Roland SC-8820 and a new Korg Micro X) play what they are supposed to (though I don't have a multi-set for the Korg yet, working on one). But when I save my Logic song, close Logic and reopen the song, the correct patch and bank info is not necessarily sent to the synths. The Track Mixer correctly shows my patch and bank settings (in the CC#00 and CC#32 boxes, etc.) but these banks and patches don't play -- unless and until I go ahead and click in those MSB or LSB boxes in the Track Mixer. I don't have to change anything, just click. Then apparently the Track Mixer sends the patch information and my synths play what they are supposed to play. Is this the way Logic always works? Is there anything else I can or should check or uncheck? (It's a drag, when working on a song with a lot of tracks, to have to click every track again every time to get the right patches playing.)
G4 Dual Mac OS X (10.4.8)
Powerbook Mac OS X (10.4.8)

Thanks for the suggestions, but things still aren't working. To implement what I think you are recommending:
In the Logic Pro menu, Preferences, MIDI submenu, Reset Message tab, there is a checkbox for "Send Used Instrument Settings on Reset." I've checked it.
In the File Menu, Song Settings, MIDI submenu, General tab, there is a "After Loading Song Send __ Used instrument MIDI settings" checkbox. I've checked it, too.
But with both checkboxes checked, I still don't get the right patches when the song loads -- yet, as before, just clicking in either MSB or LSB boxes in the track mixer seems to send the values I've previously put in those boxes, and the song plays as it should.
As to the other idea: by "insert the instrument settings into the beginning of each track," I am thinking that you mean choose "Insert Instrument Settings as Events" from the MIDI menu in the arrange window. Went there, did that. But for some reason after I do so my events list gets amended to show the patch I've selected for that track in the Track Mixer, but not the MSB or LSB -- CC#00 or CC#32-- settings I entered in the Track Mixer.
Suggestions?
Powerbook Mac OS X (10.4.8)
Powerbook Mac OS X (10.4.8)
Powerbook Mac OS X (10.4.8)

Can MainStage receive Bank Change for more than 127 patches ?

Hi,
The clue is in the title!
I need to be able to select between approx. 240 patches from a Digital Console.
Possible ? And if so - how ?
Thanks in advance,
Jon

Thanks for explaining the need --- sounds like a good reason to me.
I wonder if you could create an Apple script that could listen for bank and program changes and then (A) use the bank to make MainStage load a concert and then set the patch? I have no idea what Applescript support exists in MainStage but if there isn't any, then you could always use brute force so that the Applescript first kills MainStage and then 'open' the desired concert to open MainStage again....then send the patch change via IAC.
Only problem with that solution is it would be rather slow.....a real hack!

Problems to pay with CC, after my bank changed authorisation by sms. All payments declined from app store or in games, can someone help?

Pls help me if u had similar problem, my bank set possibiloty to have limits with all payments over net or phone, and also set higher security for eaxh such payment by code and sms, i did retyped many times this night my payment data as here as over computer, i have allowed payments for internet and also enough money on acc, i never had problems till now. Can anybody help pls? It is in a hurry i need make purchase till evening today.

If it is still slow after removing Symantec, you may need a RAM upgrade. Yosemite can run very poorly on older machines with only 4 GB RAM.

Table for Changes done to Vendor Bank Details

Hei ,
Please let me know the table which stores the old data when the Bank Key Or a Bank Account is changed for a particular Vendor.
Thanks .
Best Regards
om prakash ..

Hi,
I agree with Krishna K that you will get changed data in tables CDPOS and CDHDR.
Please note that data flows into these tables only when change management is made active else you can use standard SAP transaction codes FI04 - Display Changes and S_P00_07000008 - Display of Bank Changes to see the changes made.
Regards,
Tejas

Bank changes on Yamaha S90ES

Similar Messages

Maybe you are looking for