Bank Data automatic transfer for Portugal

Hi,
I would like to know if there is an automatic way of transfering bank data from a file for Portugal. For Spain for example I know we can do it using transaction BAUP, but we do not know how to it for Portugal. Can anyone help me?
Thank you very much,
Ariana

Hi Ariana,
You can use BA01 transaction to assign Portugal on BAUP.
Take a look in BIC transaction for internacional Banks anyway.
Regards:
REMINDER: you posted the question, please reward points for good
answers*. Thanks.

Similar Messages

Bank data is missing for country IN bank key SBIB0000003

Dear Friends
When i am start to print the cheque i am getting the error message
"Bank data is missing for country IN bank key SBIB0000003"
Please me suggestion
Regards
JK
Moderator: Please, avoid asking basic questions

Dear,
Please check in T-Code FI02, that
Bank Country = IN
Bank Key = SBIB0000003
Have you maintained any data there.
Please revert.
Br,VIvek

Automate 'transfer of basic dates to forecast dates'

Hi Experts
I wish to have automatic transfer of Basic dates to FRC at the time of changing the status of Project definition to REL.
So that, after release i will prohibit the transfer of basic to FRC. This is required to retain original scheduled dates in FRC.
So, is there any userexit to build code for trigger transaction 'transfer basic to FRC' at the time of status change of PD?
Or you may suggest any new idea in this regards
Thanks and warm regards
ramSiva

Hi,
I am not sure if there is a standard way to do this, if anyone knows it please share your knowledge,
There are several ways to obtain this , but all of them envolve development :
- You can use this BADI ( if you are at least in 4.6 C) --> WORKBREAKDOWN_UPDATE ( method AT_SAVE)
- You can create an event for object BUS2001 when it is released and the you have to program to copy from one date to another date
- If possible you can use standard substitution (OPSN transaction) but you have to develop your requirement.
I am not sure it is very clear...
sara

Automatic message for problems with partner transfer

Hello gurus,
every 15 Minutes we automatically transfer new or changed partners from SAP ERP to GTS.
Now, if there is an error in one of those partners and they cannot be transferred successfully (e.g. because of missing or inconsistent address data), SAP retries to create/change that partner every 15 minutes.
Unfortunately, I cannot check the transfer logs five times a day for any errors that might occur.
Because of that, it sometimes takes several days until I come to discover the error. Until then, many, many transfer logs have been created, most of them containing only one entry. Furthermore, the particular partner cannot be used in SAP ERP until the error is resolved, because it is blocked by GTS.
Is there any way to create a message to me (via mail or in SAP), if there is an error with partner transfer?
Thank you
Alicia

An alternate option would be to create a custom program that would read the unprocessed change pointers in ECC ( these would correspond to the customer's that have not made it successfully to GTS) and run this program soon after your transfer program completes...
This will give you a list of customers not transferred to GTS..
Thanks
Jasmit

Error while executing Initialize with Data Transfer for 0FI_GL_10

Hello All,
Post Pre prod refresh, our timestamp for the datasource 0FI_GL_10 got reset. Due to which our deltas did not bring any records to the BW system.
First we did an Initialize without data transfer for all the BW related datasources. The deltas were then set properly for all datasources except 0FI_GL_10.
We then raised a message to SAP and they suggested to run the 'Initialize with data transfer' for 0FI_GL_10 so that the timestamp is set and accordingly the deltas are fixed.
The issue now is we are getting the following error message while running INIT with data transfer.
Job terminated in source system --> Request set to red
Message no. RSM078
We have copied the data till July 1st week of 2011.
Please advice. The issue is very critical.
Thanks & Regards
Sneha

Hi Arvind
Thanks for your inputs.
Please find below the details of the short dump.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Date and Time          09/07/2011 11:25:32
Short text
     SQL error in the database when accessing a table.
What can you do?
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
How to correct the error
     Database error text........: "ORA-01652: unable to extend temp segment by 128
      in tablespace PSAPTEMP"
     Internal call code.........: "[RSQL/FTCH/FAGLFLEXT ]"
     Please check the entries in the system log (Transaction SM21).
     If the error occures in a non-modified SAP program, you may be able to
     find an interim solution in an SAP Note.
     If you have access to SAP Notes, carry out a search with the following
     keywords:
     "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
Information on where terminated
    Termination occurred in the ABAP program "GP_GLX_FAGLFLEXT" - in
     "FETCH_TO_ISTRUCTURE".
    The main program was "SBIE0001 ".
    In the source code you have the termination point in line 903
    of the (Include) program "GP_GLX_FAGLFLEXT".
    The program "GP_GLX_FAGLFLEXT" was started as a background job.
    Job Name....... "BIREQU_4N3PZQ12IA0X0PYGEA85IG39S"
    Job Initiator.. "BIWREMOTE"
    Job Number..... 11203300
    The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
    procedure "FETCH_TO_ISTRUCTURE" "(FORM)", but it was neither handled locally
     nor declared
    in the RAISING clause of its signature.
    The procedure is in program "GP_GLX_FAGLFLEXT "; its source code begins in line
    840 of the (Include program "GP_GLX_FAGLFLEXT ".

Question about key mapping for bank data in SP3 standard Vendor Repository

Hello Colleagues:
The situation is the following:
1) MDM Standard vendor repository does not use Key Mapping for the qualified table data "Bank Details". This makes sense because normally you would pay a vendor in the same account and bank regardless of the company or R/3 system you are paying him from.
2) However, here in my project customer don't have the same bank data for all of the 3 R/3 Systems. Furthermore, they would like to pay a vendor in a diferent bank and account number; depending on where the payment is generated (Company or R/3 system).
Because of this, I though about creating a lookup table for the banks which would use key mapping. I did this and I had no trouble importing bank data in to it.
Now I have this tables:
1) Banks: Lookup Flat:
Country and Bank Key as display fields.
2) Bank Details: Qualified Flat:
2.a) Field "Bank" as a non-qualifier display lookup field which points to a record on "Banks" table (Described in number 1).
2.b) The rest of the fields (Account number, Account holder, Reference, etc.) as qualifier non-display fields.
This aproach works well in data manager.
However, when I try to import vendors from R/3, I'm not being able to map the bank details, not even with "compound field" functionality, because I cannot map the display fields in the "Banks" lookup table (Described in number 1); in the "Map Fields/Values" tab in the Destination fields pane, it won't show any fields from this table.
Also, I'm not very sure if I will be able to syndicate this data back to the R/3 systems correctly, this is; replicate only the banks which exist on each R/3 client system.
Any ideas on how to solve this problem? Please help.
Best Regards,
Jorge.

... Where
did Terminal's default keystrokes (e.g., Esc,[5C for
ctrl-right-arrow) come from? They just produce
annoying beeps in bash. Are they standard sequences
for some shell that I don't know about? I
Somewhere deep in the bowels of computer history....for example
http://vt100.net/docs/vt100-ug/table3-6.html
http://www.termsys.demon.co.uk/vtansi.htm#cursor
that is to say, these codes date back to early hardware terminals such as the VT100. I believe. And that is why Terminal is a member of a class of software called "terminal emulators".

HELP! Does anyone know a "Data Recovery Expert" for I-Phone? - My calender disappeared during transfer of data from my old I-Phone 4 to my new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)

HELP! Does anyone know a "Data Recovery Expert" for I-Phone? - My calender disappeared during transfer of data from my old I-Phone 4 to my new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)

What calendar were you syning to? Outlook? Google? Something else? The directions on how to resync vary a bit.

HELP! Does anyone know a Data Recovery Expert for I-CIoud? -My calender disappeared during I-Cloud transfer of data from old I-Phone 4 to new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)

HELP! Does anyone know a "Data Recovery Expert" for I-Cloud & I-Phone? - My calender disappeared during I-Cloud transfer of data from my old I-Phone 4 to my new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)

HELP! Does anyone know a "Data Recovery Expert" for I-Cloud & I-Phone? - My calendar disappeared during I-Cloud transfer of data from my old I-Phone 4 to my new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)
The Apple techs are looking. But they can't find it. Nor can they find a back up on my laptop, Evidently when I backed up my Iphone to computer the calendar wasn't syncing. Since I only use the calander on my phone - I never noticed.
The Apple store rep that sold me the I-Phone 5 on Monday, was transferring my contacts and calendar thru I-Cloud (I never used I-Cloud before that moment - and always had it turned off). He successfully transferred the contacts - which are still on my phone), but the Calendar weirdly split into 6 calendars (2 of which were linked to my G-Mail which only had a few entries) (4 were linked to my MSN / Hotmail email and contained all the major events/data). I never created calendars that were separate or liked them to 2 different emails. I just typed entries into the I-Phone calendar. However, the calendar did exist on the new I-Phone for 24 hours. Something happened during transfer. When the Apple Genius Bar tech was attempting to back up my Calendar & merge the 6 calendars, everything disappeared in his hand while he was looking at it.
I am hoping that some really good data recovery expert exists that can restore the calendar that was in both I-Phones yesterday. It is completely devastating if I can't recover it.
Any help, or referrals, is great appreciated!!!!
Thanks!

How do I activate AUTOMATIC superscripting for numbers / dates; e.g. 1st, 2nd, 3rd, 4th, etc .... It used to do this in all PRE-5.0 versions of Pages; now, it is GONE from Pages 5.0, and I cannot find out where / how to activate it !!

How do I activate AUTOMATIC superscripting for numbers / dates; e.g. 1st, 2nd, 3rd, 4th, etc .... It used to do this in all PRE-5.0 versions of Pages; now, it is GONE from Pages 5.0, and I cannot find out where / how to activate it !!

Whilst I appreciate your responding - I do not think this helps with what I was enquiring (at least not without further explanations anyways).
I am aware of, and do use, the function - System Preferences > Keyboard > Text - for various replacements like (tm), (c), etc .... and also for fractions like 1/2, 1/4, 1/3.
However, my question was in relation to SUPERSCRIPTS for dates / numbers - namely, superscripting numerical suffixes for things like 1st, 2nd, 3rd, 4th,
So - please help - HOW do I set this up ? If indeed it is possible without System Preferences > Keyboard > Text ???

Payment Run (F110) error for MT103 - BFIBL02-303 - Bank Data is incomplete

Hi,
I'm trying to do a foreign vendor payment run in F110. We have a payment method type Z for these vendors, and FBPZ I have this payment type set to use the Payment Medium Workbench (PMW) with MT103 format.
When I run the proposal I receve the error message BFIBL02-303 - Bank Data is incomplete (Bank country , bank key ). Looking at the MT103 produced I thought it was due to the vendor bank details missing, but I've checked the vendor and they aren't.
I've tried to dig around in the code a little and notice that the 303 error message is produced in LFPAYM_SWIFT01 in Form FILL_BANK_FIELD (Fills bank fields (S.W.I.F.T. fields 52, 53, 54, 56, 57)), which looks as if it is our (the sending) bank details that it is failing on, though I can't see why.
Does anyone have any ideas?
The MT103 produced looks as follows:
BANKGB22
103
:23B:CRED
:32A:111026EUR999,99
:33B:EUR999,99
:50K:/12345678
Our Name
Our Address Line 1
Our Address Line 2
Our Address Line 3
:52A:BANKGB22
:59:/
Customer Name
Address Line 1
Address Line 2
Thanks
Ben

Hi
Check in tcode FBZP for the payment method for this country, in the screen for required master record specifications. You might have bank details. After, in the settings for country (SM30/V_005_B 'Country Field Checks') check the values for this bank. In the data for vendor you need data for bank, in in required master record specif. you need bank data. If you have the SWIFT maybe you have to populate it in vendor.
I hope this helps you
Regards
Eduardo

Legacy data transfer for new depreciation area for already existing assets

Hi all,
I am doing legacy data transfer for New deprecaition area for already existing assets through AS92.
I like to give Ordinay depreciation posted amount for the current FY for these assets in AS92, but i find this field is not editable inAS92.
Please guide me to upload the Posted deprecaiton amount (for current FY) for these assets. I have assets both which are acquired in Last FY year and also this FY year.
Regards,
Srinivas

HI,
I have to migrate Posted dpereciation for new depreciation for nearly 3000 assets, In transaction 147, where i need give Acquituion value aslo, please note these are not new assets, these are prior year assets wiht opeing balances. If we use 147 system will take it is current acquition.
Please note my transter date is 28.02.2010, I have already run AFAB for this company cdoe Feb 2010 for other depreciation areas.
Now i am trying to update Opening APC Cost and Opening Accumulated deprecation for these assets and also posted depreciation for this FY.
Where in AS92, i am able to update Opeing APC Cost and Opeing Acc Dep succsfully for new dep area for already existingassets, bu Posted deprecation field is not editable.
Please guide me how to update posted deprecation for new deprecaition area in AS92 or some other way for already existing assets.
REgards,
Srinivas

Automatic Transfer Order for GR from External vendor and from Process Order

Hi Expert
We need to implement the logic for automatic transfer order,
the Idea when we Receive the Goods from Vendor and while posting goods via Migo we want that the system create automatically the TO.
the same approach to be implemented for GR from Process Order we need that the system create TO directly to the right Bin
Your support is higly recommanded
Olfa

Many thanks for your support
I made what you illustrated in your previous message for the Mvt type 501:
There is a pop up screen which displayed asking me to create TO for Material Document
Please find attached the related screens
And please note that the Material Master was updated accordingly
Please note
Please correct me if I made a wrong step
Regards

Event for executing data automatically from PI to BI

Hi,
We are using web service for data source. For that we have created a source system web service and we are using PI for transfering flat file data into BI through web service and data source is in BI which is updating data into BI base DSO.
In this PI push the file and data uploaded into BI but this is a manual. Is there any event when PI push the file and the process chain executed automatically because we have to run process chain manually in BI.
Regards

With New G/L in R/3, the tables FAGLFLEXT (totals), FAGLFLEXA, BSEG, BKPF (Line Item) get filled. in BI side u have to use following data model
0FI_GL_10 -> 0FI_GL_10 -> 0FIGL_C10 -> 0FIGL_V10(for Totals)........Datasource 0FI_GL_10 is based on table FAGLFLEXT
0FI_GL_14 --> 0FIGL_O14 (for Line item). .. .... .......Datasource 0FI_GL_14 is based on tables FAGLFLEXA, BSEG, BKPF
SAP delivered function module RS_BCT_FIGL_DATA_GET_VC10 pulls data from 0FIGL_C10 to load 0FIGL_V10... Logic for cumulative balances considering carry forward balances from previous year for Balance sheet & P/L reports, is maintained in that function module.
(So, make sure this FM got installed while u installed standard content for GL model
Do the following, to see weather FM got installed.
Goto change mode of virtual provider (ZFIGL_V10). click information icon (blue 'i')
click 'Type/ Namespace'.. Then click 'details' button
If there is no FM, u won't get any data to 0FIGL_V10 and related queries.
And also 0FIGL_V10 uses Financial Statement Version object (0GLACCEXT), which is not available in 0FIGL_C10.
For Balance sheet & P/L reports, 0GLACCEXT is key object, so 0FIGL_VC10 is must.
U should install & load master (attr, hier, text) data for 0GLACCEXT.
http://help.sap.com/bp_bw370/BBLibrary/documentation/B70_BB_ConfigGuide_EN_DE.doc

Automate script for import data

automate script for importing data to the cube from txt files.
Ex: - I have below 2 files for import
aaaa.txt
bbbb.txt
For the above simply i can write esscmd or Maxl script for importing files .
Esscmd :
IMPORT 3 "\aaaa.txt" 4 "N";
IMPORT 3 "\bbbb.txt" 4 "N"
my question , suppose if some more files added to the existing files, for example cccc.txt got added ,how can i write a code for this?

Well I guess this will do
dataDir=" " # Give the data directory path here
maxlFile="maxl1.msh"
cd $dataDir
for file in `ls *` ;
do
maxlStmt="import database sample.basic data from data_file '$file' using rules_file 'xxx.rul'
on error write to 'xxx.log';";
printf $maxlStmt >> $maxlFile
done
ls * is lists all the files in the directory. If you want to be more specific and if you yhink tat your data folder may contain more files then you can use "ls *.txt" if your file extension to load is txt.
Well I haven't tested this as I am on vacation...So you can just follow the similar way.
This is only for the 3rd point which you said

Data Ownership Authorization for JEs & Banking

Hello All,
Is it possible to have data ownership authorization for documents other than Sales & Purchase documents? For a company with multiple branches, we need to block access of Financial related information such as JE, Incoming & Outgoing payments, Deposits of one branch to the other. Can this be done?
Any help on this would be highly appreciated.
Thanks & Regards,
Gyanesh Rupani
Edited by: Philip Eller on May 27, 2008 11:48 AM
Edited by: Philip Eller on Jun 10, 2008 9:13 AM*

Hello Suda,
Thanks for the reply. The requirement is that a user from one branch should not be able to see what the other branch is doing. However, stock levels at all the branches should be visible to any branch.
Hence, similar to marketing documents, the display of Journal Entries, Vouchers, Posting Templates, Inventory Transactions, Banking transactions of any given branch should not be visible to other branches.
Can this be accomplished using Transaction notification stored procedure or by some other means? If yes, I would appreciate if you can throw some light on it.
Thanks & Regards,
Gyanesh

Bank Data automatic transfer for Portugal

Similar Messages

Maybe you are looking for