Bank data is missing for country IN bank key SBIB0000003

Dear Friends
When i am start to print the cheque i am getting the error message
"Bank data is missing for country IN bank key SBIB0000003"
Please me suggestion
Regards
JK
Moderator: Please, avoid asking basic questions

Dear,
Please check in T-Code FI02, that
Bank Country = IN
Bank Key = SBIB0000003
Have you maintained any data there.
Please revert.
Br,VIvek

Similar Messages

  • Master Data is missing for Specified Matierials at cube level  !!

    Hello Experts,
    Good Day..!!
    I have been facing an issue in my project,  Master Data is missing for a KF and values are not displayed  in a report for the specified matierial Nos. Where as other matierial nos KF values are displaying.
    Intially, i checked from Cube End and found the issue is in Cube level only.
    For that in the data flow, i already checked whether the data has been loaded perfectly or not.
    Tried to reran the DTP once again and checked the values for the KF in the report and unfortunately KF values are not displaying for specified matierials only.
    Kindly advice how can i move further..
    Thanks,
    SN.

    Hi,
    Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
    Hope this helps...
    Rgs,
    Ravikanth.

  • Calculation  procedure is missing for Country

    Hi Friends,
    I have recently installed SAP 4.7.
    while doing organisation structure, in all
    configurations with country IN am getting a wsrning
    saying "Calculation  procedure is missing for Country
    IN". and there is no tax procedure TAXINJ in pricing.
    and in OBBG there is no TAXINJ. how to solve this. am
    not able to configure anything with country IN.
    Pls Help
    Thanx & Rgds
    Samatha

    Hi Mr. Prashanth Goud,
    Thanx for the reply.
    But how do i configure this, with all those condition types without any reference procedure. all those will be country specific and standard. Please suggest me how to do it. if possible can u pls tell me the steps to do this.
    Thanx & Rgds
    Samatha

  • Master data Lookup missing for sold to party

    Master data Lookup missing for sold to party?
    The look up flow is from E_BOM to E_BOM1
    regards

    Hi,
    Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
    Hope this helps...
    Rgs,
    Ravikanth.

  • Index is missing for a specific Primary key.

    Hi All,
    Index is missing for a specific Primary key but for other PKs index is available (verified in metadata, USER_INDEXES).
    Status of problematic PK is enabled.  This issue is only in one environment and other envs index is associated with this PK without any issue.
    Could you please advice, what could the possible reason?
    Regards,
    Narasimha.

    What other indexes are on your table? You do not need a unique index to enforce a primary key:
    > create table bc (col1 number, col2 number);
    Table created.
    > create index bc_ix on bc (col1, col2);
    Index created.
    > alter table bc add constraint bc_pk primary key (col1) using index bc_ix;
    Table altered.
    > create unique index bc_pk on bc (col1);
    Index created.
    > select index_name, uniqueness from user_indexes where table_name = 'BC';
    INDEX_NAME                     UNIQUENES
    BC_IX                          NONUNIQUE
    BC_PK                          UNIQUE
    > select constraint_name, constraint_type from user_constraints where table_name = 'BC';
    CONSTRAINT_NAME                C
    BC_PK                          P
    > drop index bc_pk;
    Index dropped.
    > select index_name, uniqueness from user_indexes where table_name = 'BC';
    INDEX_NAME                     UNIQUENES
    BC_IX                          NONUNIQUE
    > select constraint_name, constraint_type, index_name from user_constraints where table_name = 'BC';
    CONSTRAINT_NAME                C INDEX_NAME
    BC_PK                          P BC_IX
    >

  • Data is missing  for Jan,Feb in 2008

    Hi,
    I have an issue with the report..The Concrete Profitability Report  is using the manually uploaded rates for  cost types. The business reported that the actual columns in the reports seem OK (since they come from the loaded amounts for the 12 months in 2008), but the budgeted amounts are showing a big variance and they don't look accurate bcoz the values are not calculated for Jan,Feb for 2008.The report runs based on multiprovider.
    Perhaps the budgeted amounts for Jan and Feb  in 2008 are  missing.
    Could yoy please let me know how can i proceed further and help me out in this issue.
    Thanks
    Sindhu

    Hi,
    Did u check in the respective cube whether the data is available for that period? check in the cube and also do LISTCUBE on multiprovider.
    Khaja

  • Personal Data and Address for Country Grouping 99 - error on ESS

    Hello All,
    I have configured personal data and address infotypes in ESS for the country grouping 99.
    I have done the following config
    1. Assign Screen Structure to Infotype Versions
    2. Define Active Subtypes and Use Case
    3. Define Country-Specific Applications
    4. Created a Z service and then assigned this service to subarea.
    I made use of US service and copied to z.
    after the config when i log on to the portal and check the personal data or address links am getting the error:
    An exception occurred that was not caught., error key: RFC_ERROR_SYSTEM_FAILURE
    the st22 dump is
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
    caught in
    procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
    clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component.
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
    I searched in the forum but still am unable to figure it out where i am wrong or missing any config or any other technical error.
    Can any one pls help me

    http://wiki.sdn.sap.com/wiki/display/ERPHCM/HowtoReuseCountryspecificapplicationsforMolga99
    check the steps in above link
    and also please check with some standard country like india 40 or usa 10 what use cases and time constraints have been set
    INFTY - Now specifies the infotype.
    USECASE - Corresponds to the value in the table V_T7XSSPERSUBTYP.
    ZEITB - Corresponds to the value in the table V_T591A (V_T582A).
    Page 2
    SUBTYPE_TAB - Here, you will find a list of the subtypes that have
    already been checked and that are correct.
    You then find the subtype in METADATA-SUBTY. However, you must move up
    one subroutine in the call hierarchy in advance to do this.
    This data makes it easy for you to identify the infotype and the subtype
    and correct the inconsistency by making entries in the tables mentioned.
    ie
    T_cd:SE24 >>CL_HRPA_PERNR_INFTY_XSS >> CHECK_USECASE_WITH_CONSTRAINT >>
    for
    usecase = A1, A4, B1, B4 (table V_T7XSSPERSUBTYP)
    you need to have
    zeitb = '1' OR zeitb = '2' (table V_T591A)
    for
    usecase = A2, A3, A5, B2, B3, B5
    you need to have
    zeitb = '2'
    for
    usecase = A6, B3
    you need to have
    Zeitb = '3'

  • Date added missing for itunes 12.

    In previous version of iTunes there was a column header option for audiobooks called date added. (when book was added to iTunes). I use the header to sort in reverse order so I get most recently added books at top of list.  This option seems to be missing in 12.0.1

    It is still there. If you hold the cursor over any column header then control-click a long drop down list appears so you can select your column headers
    EDIT: I am sorry, I misread "audiobooks". This reply is only valid for the Music category, I can't verify it for the audiobooks category

  • Transaction Data Icon Missing For FlatFile Datasource

    Hi All,
    We are loading the data by using the flat file data is loaded successfully.But beside the cube we will have activation icon , Aggregates Icon and Transaction data icon. In our case we are missing transaction data icon.What could be the reason.
    But data loading is fine and for some of time chars also data missing .
    Pls anybody can throw some light on this.
    Thanks in Advance,
    Shah.

    Hello S SR,
    How r u ?
    just see the top and make the column adjustment like we do in MS-EXCEL you can see the Transactional Data ICON.
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • Meta-Data are missing for table

    Dear ALL ,
    I am trying to call "HR_READ_INFOTYPE" from a Java program using rfc and I got this error:
    " Meta data equal to null is not allowed for field INFTY_TAB with type TABLE in meta data instance TABLES "
    the required table INFTY_TAB is used as a generic table in the function module. I tried to use PA0008 but it seems it is not possible to use it through  RFC call.  How can I avoid this exception?
    Thanks in advance.
    Mehdi.

    Hi,
    This function by default is not remote enabled. Loot at BAPI to access/modify infotype data?
    Regards,
    Jarek

  • SQL Developer 2.1.0.63 - Export Data menu missing for SQL Server databases

    Hi
    The Export Data menu only appears for Oracle databases in this version, it does not appear for SQL server databases.
    To demonstrate:
    Press F9 to run query
    Right click on Query Result data
    For Oracle an Export Data sub menu appears
    For SQL server no Export Data sub menu appears
    This worked in previous versions.
    Is this functionality going to reappear?
    Thanks
    Dave

    Hi,
    Looks like this is exactly the same problem for third party connections as I have the exact same issue for mySQL.
    I had to apply 1.5.5 version to fix it.
    Hope we're going to have this solved !
    Thanks,
    JP

  • Email subject and sender data is missing for HTML contents

    Dear all,
    Good day. I tried to send an email with HTML codes to draw a table. It works, however, the email sender and subject are missing. And the email body looks like the following:
    To: abc From: xyz Message-Id: Subject: This is email subject. Mime-Version: 1.0 X-Mailer: SAP R/3 Internet Mail Gateway 4.6B1 Content-Type: TEXT/HTML; Charset="US-ASCII"; Name="NO NAME.HTM" Content-Transfer-Encoding: 7BIT
    Table header and contents.
    Anyone has idea on what it happens and what is the solution? Your help and advise are greatly appreciate. Thanks in advance.
    Regards,
    CN

    is there any problem with Background spools with SAP? We are running R3 here. And looks like its the spool background job that's creating the error. When i execute the report it shows all the record in print preview or if i print it.
    Please Help!

  • F110 posted payment succeffully, but F-58 have bank key problem

    Hi all expert,
    i posted first payment successfully by using F110.
    however, i would like to make second payment by using F-58, then system prompt me error message with "Bank data is missing for country SG bank key 641", message no. F5453.
    if it is bank master problem, but why i can post payment successfully at F110 at first?
    Please advice.
    Thanks & Regards,
    Totoro

    Check the below in FBZP - Hose bank   or (FI12)
    Double click on you bank master and check the below whether the bank key and country combination is correct.
    Bank Country              IN      India
    Bank Key                  123456
    In F-58, what is the first screen you are getting and paste few details below for our ref.
    Thanks

  • Data missing for plant

    Data is missing for a certain plant in spare parts infocube (BW). Please suggest me any reasons why this can happen.
    Thanks.

    Hi anand,
    Check the  data in PSA.
    If you have the entries there for the missing plants then
    Check the transfer structure whether any routines is used or not.(check plant info object also other info objects whether it has any routines or not) then check in the update rules whether there is any start routine defined , also check the fields in the update rules for availability of routines.
    Also in the monitor screen drill down the data packages right click on any package and simulate update , select all records for simulation and then simulate it and check.
    Regards
    RaM

  • OracleAS Data Source Plugin for OmniPortlet for SAP

    Hi,
    What is the later version for the OracleAS Data Source Plugin for OmniPortlet for SAP ?
    Still BETA release ?
    thanks

    Hello,
    We get the same error message for our WD4J application now
    "JCo data source missing for type: class com.company.application.main.model.Tvm1T    class com.sap.aii.proxy.framework.core.DataAccessException"
    Does anybody know the reason for this?
    Thanks,
    Robert

Maybe you are looking for