Bank DC issue  (Bug with ESS 603?)

Hi all,
We are trying to disable  the 'Edit' and 'Delete' button in the Bank Overview iView.
As the first step we tried printing some message in the init() and wdDoModify() method  of VcPerBankUSOverview of essusbank using IWDMessageManager.After rebuilding and deploying,somehow the messages are not geting printed.
If we try printing in the detail view, its getting printed.But not in the Bizcard view of VcPerBankUSOverview.Am I in the wrong place? Is this bizcard getting created dynamically for Bank Overview screen.
I tried printing messages in Per DC too.
We are in ESS 603.Is this a bug with ESS 603?
Thanks
Kukku

Hi,
to disable the Edit and Delete buttons of the bank overview there are 2 options. Neither of them involves changing a standard component or even any kind of development.
1 - Configure the correct authorizations in ECC system so that the users don't have authorization to modify or delete the data.
2 - Disable the buttons by using the Java Webdynpro Personalization: preview the iView and press CTRL + right mouse button on top of the buttons.

Similar Messages

  • Issues / Bug with Nokia N9

    Issues / Bug with Nokia N9
    1. The mobile network gets disconnected after each call and I have to wait atleast 10-20 seconds to redial or make a new call, I cannot dial a number just after I finish a call / speaking with someone. It happens on both Incoming and outgoing Calls.
    Troubleshooting Steps:
    1. Changed SIM card from the telecom provider atleast 3 times. The same SIM card works absolutely fine in another mobile.
    2. Reset and set to default settings tried - No Result
    2. The ear piece volume is considerably low.
    Troubleshooting Steps:
    1. Reset and set to default settings tried - No Result
    3. When playing a video online on YouTube the timing for a 4 minute video shows as
        34:00 34:23 instead of showing 04:00 04:23
    Troubleshooting Steps:
    1. Reset and set to default settings tried - No Result
    4. The photos from the Facebook app built into the phone do not always load even If I am running a 3.5G Mobile Data connection or at Home on a Wi-Fi connection
     Troubleshooting Steps:
    1. Reset and set to default settings tried - No Result
    I am from India, bought the phone last year from Abu Dhabi and it is Made in Finland.
    Really I need someone to help me out here!!

    If you reinstalled the OS again from Nokia, you may just have a defective phone and there could be something wrong with the hardware.  I have two N9's and I haven't experience any of these problems.
    Can you record these problems and post the link to youtube here so I can see what's happening?
    I Choose Nokia!

  • Issue / bug with big disk capacity

    Hi,
    When 10.7 was released i had some issues with big capacity disk, two WD Elements Desktop (3 To).
    I had EFI error message after disk verification, i was unable to repair it on OS X or using recovery partition, i was unable to proceed to à complète backup. After Lots of tests i decided to go back to 10.6, Thatcher solved thé problem.
    Anyone aware of it ?
    Regards

       Re-index Macintosh HD.
       Spotlight reindexing will take a while to finish.
       System Preferences > Spotlight > Privacy
       http://support.apple.com/kb/ht2409
    Note:
      If you don’t have Macintosh HD icon on the desktop,
      Finder > Preferences > General > Show these items on the desktop:
      Enable “Hard disks”.

  • Iam unable to purchase in AppStore reason being payment gateway,checked with my bank no issues.

    Iam unable to purchase in AppStore reason being payment gateway,checked with my bank no issues.

    Hey Bing:
    Clearly the message hasn't trickled down to Adobe support. After purchasing Captivate, and trying to register now I'm locked out of my accoun entirely-- including all my files on Creative Cloud!! I just spent a the better part of two hours dealing with this exact same issue as the orginial poster (creative cloud login issues... likely due to an old email address floating around). Here's my favorite gem:
    Khalid: I have checked the information and see that I am unable to reset your password and login to subscription service in this case I will go ahead and escalate this issue to our concern team who will reset and get back to you within 24 to 48 hours
    Jeff: great. can i get a case number so i can follow up with billing / otherwise track this issue
    Khalid: Once you close this chat you can login to your Adobe account after some time like 20 minutes later to view the case number
    Jeff: how am i supposed to login exactly?
    Khalid: If you are able to login to your Adobe account then you can login to Creative Cloud
    Jeff: Khalid, that's what we've been trying to do
    Jeff: if i could login we wouldn't have anything to escalate
    Khalid: Yes, that is correct since you are unable to login I will escalate this issue to next level they will check and get back to you at the earliest
    Jeff: got that. now how do i get this case number?

  • Issue with ESS/MSS Business package 1.41

    Hi All
      I had an issue with ESS/MSS recently we deployed Business package 1.41 it contains HCM Forms and Process also,
    and we assigned the standard Manager-self-service role & Employee-self-service-role to test user but when the user is trying to access the standard application he is getting Portal runtime error.
       Is there any configuration is need from HRFunctional side and Basis side
    if any body have an idea please let me know ASAP.
    For every MSS standard applications like :work overview ,Recruiting,Team,Talent Management,Budjet,Projects,Planning ,Organization, leave
    I am getting like below error.
    Portal runtime error.
    An exception occurred while processing your request. Send the exception ID to your portal administrator.
    Exception ID: 02:17_13/04/11_0031_116801250
    Refer to the log file for details about this exception.
    Thanks
    Renu.

    Hi All
        Here I am giving logs detail I got  two logs so giving both logs , can anybody help on this issue , if any configuration need please suggest.
    Full Message Text
    03:19_13/04/11_0045_116801250
    [EXCEPTION]
    com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template '<System.Access.WAS.protocol>://<System.Access.WAS.hostname>/sap/bc/webdynpro/<WebDynproNamespace>/<WebDynproApplication>/;sap-ext-sid=<ESID[url_ENCODE]>?sap-ep-iviewhandle=007<ESID[HASH]>&sap-wd-configId=<WebDynproConfiguration>&sap-ep-iviewid=<IView.ShortID>&sap-ep-pcdunit=<IView.PCDUnit.ShortID>&sap-client=<System.client>&sap-language=<Request.Language>&sap-accessibility=<User.Accessibility[SAP_BOOL]>&sap-rtl=<LAF.RightToLeft[SAP_BOOL]>&sap-ep-version=<Portal.Version[url_ENCODE]>&sap-wd-tstamp=<$TimeStamp>&<ProducerInfo>&sap-explanation=<User.Explanation[SAP_BOOL]>&<StylesheetIntegration[IF_true PROCESS_RECURSIVE]>&<Authentication>&<DynamicParameter[PROCESS_RECURSIVE]>&<ForwardParameters[QUERYSTRING]>&<ApplicationParameter[PROCESS_RECURSIVE]>'; the problem occured at position 310. Cannot process expression <System.client> because Invalid System Attribute:
    System:    'SAP_LocalSystem',
    Attribute: 'client'.
    at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)
    at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
    at java.security.AccessController.doPrivileged(AccessController.java:246)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(AccessController.java:219)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Next One
    Full Message Text
    Exception ID:03:19_13/04/11_0045_116801250
    [EXCEPTION]
    com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
    Component : pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.14.bp_folder/com.sap.pct.erp.mss.14.roles/com.sap.pct.erp.mss.manager_self_service/com.sap.pct.erp.mss.manager/overview/com.sap.pct.erp.mss.work_overview/com.sap.pct.erp.mss.workoverview/com.sap.pct.erp.common.key_figure_monitor
    Component class : com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent
    User : P00000531
    at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
    at java.security.AccessController.doPrivileged(AccessController.java:246)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(AccessController.java:219)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template '<System.Access.WAS.protocol>://<System.Access.WAS.hostname>/sap/bc/webdynpro/<WebDynproNamespace>/<WebDynproApplication>/;sap-ext-sid=<ESID[url_ENCODE]>?sap-ep-iviewhandle=007<ESID[HASH]>&sap-wd-configId=<WebDynproConfiguration>&sap-ep-iviewid=<IView.ShortID>&sap-ep-pcdunit=<IView.PCDUnit.ShortID>&sap-client=<System.client>&sap-language=<Request.Language>&sap-accessibility=<User.Accessibility[SAP_BOOL]>&sap-rtl=<LAF.RightToLeft[SAP_BOOL]>&sap-ep-version=<Portal.Version[url_ENCODE]>&sap-wd-tstamp=<$TimeStamp>&<ProducerInfo>&sap-explanation=<User.Explanation[SAP_BOOL]>&<StylesheetIntegration[IF_true PROCESS_RECURSIVE]>&<Authentication>&<DynamicParameter[PROCESS_RECURSIVE]>&<ForwardParameters[QUERYSTRING]>&<ApplicationParameter[PROCESS_RECURSIVE]>'; the problem occured at position 310. Cannot process expression <System.client> because Invalid System Attribute:
    System:    'SAP_LocalSystem',
    Attribute: 'client'.
    at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)
    at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    ... 29 more

  • Any Known Issues/bugs/problems with Essbase 6.5.3

    Hi,I would like to know if there are any issues/problems/bugs with Essbase XTD Analytic Services 6.5.3 running on windows 2000 server.Thank you

    I'm on NT 4.0. We upgraded last Friday, April 11. Thursday morning April 17 the service Froze. Not sure what caused it but during the evening, one db was disabled because it could not open the pag file after a L0 export. We're investigating.Wayne Bates 913-762-7966

  • 3.1EA2 Old bug with German language settings still exists

    In the past I wrote several times about a bug in SQL Developer when running in German language mode. This bug is still not fixed in 3.1 EA2:
    In new folders for user definded reports only the options "Kopieren" and "Speichern unter ..." ('Copy' and 'Cave as') are available, when SQL-Deverloper runs in German language mode. Other options like "Bearbeiten, Neuer Ordner, Neuer Bericht, Ausschneiden, Einfügen, Löschen" (Edit, New Folder, New Report, Cut, Paste, Delete) are missing. A workaround is to force language to English with the line
    AddVMOption -Duser.language=en
    in sqldeveloper.conf
    I mentioned it first in Re: Folders with limited functionality about version 2.1.1.64 and then in 30EA2: Limited folder functionality with German language 3.0 EA2 and German language bug with user defined reports still not fixed Beta Release 3.0 EA3
    Edited by: user1775992 on 22.11.2011 03:30

    I have raised a bug on this issue and I am actively looking into it.

  • EeePC- SDHC Issues only with Arch

    To begin with I have a Eeepc 701 4G and a A-DATA 16GB SDHC Turbo Eee PC Edition card. Whenever I try to install Arch via a usb drive, I get a error on boot that says something along the lines of I/O error with my SDHC card which is listed as /dev/sdc1. Normally I would think this is a defective card or its going bad but Arch is the only distro that gives me this error.  The error is just in the text that scrolls by but it also hangs when trying to partition the SDHC drive To test it out I have installed Mandriva 2008.1 Spring, Ubuntu 7.10/8.04/8.10, Ubuntu-eee, fluxflux-eee, and Forsight Mobile (I have been going crazy trying to find a distro I can live with/ even close to what Arch provides). Each one of them I set the / partition on the internal SSD and the /home partition on the SDHC card. Arch is the only one that gives a error with the SDHC card. I have ran extensive tests in Linux and also windows(sisoft sandra) but everything is fine with the card. The card is supported as it is a "Eee PC Edition Model" http://www.newegg.com/Product/Product.a … 6820211300  I have noticed tha some distros have problem with installing via a usb drive and using /home on a SDHC drive(only Fluxflux-eee) but it is normally a /etc/fstab issue not the I/0.
    Any ideals?
    THanks
    BTW: The card is only 2 weeks old.
    Last edited by securitybreach (2008-11-14 07:26:14)

    hi guys,
    I had a similar bug on my netbook with the Elantech touchpad. I have reported a bug to the maintainer of the Elantech driver and I get a patch that fix it.
    description of my bug:
    with two fingers above the touchpad, tap alterrnatively with each finger on the touchpad.
    - expected behaviour: the cursor does not move.
    - actual behaviour: the cursor jumps sometimes to the left or the right.
    this only happens when configuring the touchpad with synaptics (by defaults, mine is detected as a mouse)
    is your bug the same than mine ?
    are you using both the proto=exps option and synaptics ? (I still have the bug in this configuration)
    if it is the same bug, I have submited the patched kernel to AUR

  • ICal bug with month view

    I primarily use week view on iCal, but sometimes i switch to month view for a larger perspective. Often, i use month view to check for any leftover events from the previous month in case i forgot to delete one or two.
    I just found a bug concerning this. If i click on "month" today, it'll take me to the month view for june 2011, and from there i can navigate forwards or backwards. However, may 2011 seems to have a bug. If i click on < from june, it does nothing; if i click again, it takes me to april 2011. Similarly, if i click on > from april it does nothing and if i click again it takes me to june.
    It doesn't end there. The june/may thing happens only when the selected day (the one shaded light grey on the month and week views and bright blue on the little month tab on the left) is after 04 june. If a day from the first week of june (i have my weeks start on sunday) is selected, the < button does take me to may, but several events which i deleted a long time ago are showing up.
    Now, i have an event set for today (04 june). Since the first four days of june are in the same week as the last three of may, the month view for may shows these four days, as any normal calendar app would.
    If i use the month tab to the left to navigate, i can access may 2011 by selecting any day on that month. However, iCal's behaviour depends on which day was selected previously. If the previous day was in april 2011 or earlier, iCal will show the month of may completely empty, which is great because i have no leftover appointments from may; however, the box for 04 june is also empty, which it shouldn't be. If the previous day was in june 2011, it'll show may with a repeating event on every sunday except the first, which is completely absurd, since i have deleted this event (and why isn't it showing on the first sunday in may?); the box for 04 june, however, will correctly show the event i have set for this day. If the previous day was in july 2011 or later, it'll show may with the repeating event on all sundays (including the first one) and it won't show anything on the box for 04 june.
    Obviously, there is a bug with may 2011.
    In case it helps, i do have a repeating event set to all sundays until the end of existence, but i have deleted all the entries from may and previously, since they have obviously already happened. Also, i had many other repeating events set to happen on different weekdays; these are to repeat themselves weekly until about halfway through june, and they started on april or may (can't remember right now). Like the sunday one, i have deleted all the entries from may because they have already taken place. Strangely (and thankfully), none of these appear when i visit may from june or later, as does the sunday event.
    Any help would be greatly appreciated. Or am i forever stuck with week view, which has so far proven to be bug-free?
    (I did a search on Google and another on the Apple forums for this issue but could find nothing, so i decided to ask the question myself. I apologise if somebody has already asked this question and i just couldn't find it.)

    Greetings,
    I have a vague recollection of someone else with this issue but haven't experienced it myself nor encountered it recently.
    Troubleshooting:
    1.) First make an iCal backup: http://support.apple.com/kb/HT2966.
    2.) Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical and / or "ical"
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    __NOTE: Removing these files will remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    Once the computer is back up and running open iCal and test.
    Hope that helps!

  • Is this a bug with BoEdge3.1?

    Can anyone help me on the issue which my customer is facing for BoEdge3.1
    Concerning  Error Message: You do not have enough Named User Licenses to make this user a named user. You have 55 Named User Licenses. (FWB 00013)
    This is the error message she was receiving when trying to change an
    existing user from Concurrent to Named under the Connection Type on the
    Properties panel.
    The current workaround was to delete the existing Concurrent user, then re-add the same user as Named.
    She have been going through this process of deleting existing users, and then
    re-adding them as Named and it was working okay. Then, it stopped
    working and she started getting the same FWB 00013 error message again.
    She was not able to create any Named users now. Basically, the workaround
    worked for a while - then stopped working.
    She currently has a total of 88 users. 21 of them are named. 67 of them
    are Concurrent. She is licensed for 55 Named.
    Once again, the system thinks she has 55 users marked as Named. But
    there are only 21 marked as Named.
    She did notice that as she was going through all of her existing list of
    users, in alphabetical order, she was opening the Properties tab and
    checking the Named/Concurrent status - as she got to the 55th user in the
    list that is when she started getting the error message again.
    Is this a bug with BoEdge3.1?
    And I got an ADAPT01194692.
    I am not sure that Is the ADAPT related to this issue.
    Please help me its very critical.

    Hi Salena,
    If you are an SAP Employee, request you to post this question at
    https://cw.sdn.sap.com/community/bobjtc
    Cheers,
    Subhodeep

  • BlueTooth bug with car

    Since the 4.3 update there's a big bug with the bluetooth connection with the car system - it still exists after a factory reset:
    I paired the phone and the car. But every time they connect, I get a message box if I want to grant access to my phone's messages. Even the "Allow always" option does not work and I get asked every time. Very annoying!!

    Hello, I'm having the same issue after updating my Xperia SP to Android 4.3 (12.1.A.0.266). In my car (Mercedes Benz A-Class from 2013) there is a radio called "Audio 20 CD" built in. Every time when I want to get into my car, my smartphone wants a connection request for my messages (SMS).The option "Always Allow" does not work. The phone does not remember the next time. I tried several times a new pairing of phone and car radio and I cleared the cache of the bluetooth-share app and smart connect app, but this didn't solve the problem.  Is there a fix available? With kind regardsThorsten

  • Am i the only one that see's serious bugs with Windows Search index on Windows 8.1 and Office 2013?

    So i originally had Windows 8 and Office 2013 installed. I noticed that alot of my emails in Outlook 2013 as well as contacts werent being indexed. I waited for windows 8.1 and did an upgrade hoping the 8.1 would fix the issue. It didn't.
    So i formatted my hard drive, installed fresh windows 8.1, and office 2013, and let it Windows Index run. I see 2 things happening.
    A.) The indexer never completes
    B.) the indexer takes up 40% cpu usage.
    I tried rebuilding, creating index from new location, nothing seemed to work. I decided to prevent the indexer from searching Office apps (outlook and onenote) and low and behold it completes indexing. 
    I decided to try and format again and see if there was some bug causing the issue. So this week I formatted once agian, loaded Windows 8.1, installed updates, and loaded office 2013. Once again, my indexer
    is stuck around 70k items and my processor usage on Searchindexer.exe is around 30-40%.
    Is this a known bug with 8.1 and office?
    Brad Nelson MCSE/DCSE/A+/Network+/WCSP

    Hi,
    I test in my environment, and Windows would finish the index, the CPU usage keeps in 29%, which my RAM is 8G.
    Can you tell us how you let the Windows Index run?
    Alex Zhao
    TechNet Community Support

  • Really interesting bug with Compiz, not sure how to label it

    Hi forums, I really promise I searched around for this, so if this is a super common bug, I apologize in advance (I really wasn't sure how to even label what was happening). All I know is that when compiz is enabled, I'm getting super weird behavior in programs, mostly with terminal and system menus. The only way I know to show this is by a screenshot:
    http://i66.photobucket.com/albums/h248/ … 0c7d62.png
    As you can see from the pic, there are multiple menu objects highlighted (I promise I don't have 3 mouse pointers!). I couldn't capture this via screenshot, but the highlighted elements are actually alternating between this set and another. I could show more instances of this, but I think it would just be redundant. Another (possibly related) issue is the odd behavior in terminal. When I am using terminal to do something, be it accessing the AUR repository or editing a file somewhere, or anything really, the terminal scrolls up and down exactly 1 line, repeatedly (very fast). The only other place I experience significant issues is with compizconfig settings manager (ccsm). When trying to access a different menu, the ccsm window flashes very quickly back and forth to the previous menu screen. All of these things make it incredibly difficult to make selections. My browser (chrome) is fortunately exempt from this dilemma.
    The only thing I know for sure is that this is caused by compiz. Disabling compiz (going back to xfwm or using another window manager) eliminates the issue. I hadn't had this issue until yesterday, but I really hadn't changed anything.
    Things I've tried:
    - Reinstalling compiz
    - Enabling/Disabling Emerald
    - Installing compiz-bzr
    - Fooling with metacity
    - Restarting
    Any advice or words of wisdom on this would be very appreciated
    -- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --

    Thanks for the reply. I'm actually using a slightly older nvidia gpu (480 GTX) with nvida-340xx, which is what nvidia recommends. I've worked with changing video driver parameters, and nothing there has seemed to change this much. I was afraid this was being caused by a mistake of mine, but it seems more and more likely that this is a problem with compiz: to test, I made a virtual machine and installed arch there (same setup as mine, only completely fresh) and I'm having the same issues. I like compiz because of the amazing ability to theme and control the general appearance of my gui. Is there a good alternative that one of you all could recommend?
    Last edited by MaroonR (2014-11-01 05:45:46)

  • Blocking bug with 10.8.3+Adobe Lightroom+Canon iPF5000 (but workaround found)

    Hi all,
    since I have updated my MacBook Pro (early 2011 model) with 10.8.3, I have a blocking bug with Adobe Lightroom (either 4.3 or 4.4) for launching prints on my Canon iPF5000 (firmware 1.33, either MacOS driver 2.67 or 3.06, connection through USB).
    When I was under 10.8.2 with the Canon's driver 3.06, everything works fine.
    Basically, after clicking Print a Copy or Print... in Lightroom, the file spooled to the driver stays in MacOS printer queue. Within the printer queue window, the printer is in pause mode, and each time I try to resume the printing processing, the driver put it on hold immediately. When I look into the history on the Console, the driver complains about an unknown error... The data stay within the driver, as my Canon iPF5000 "Data" led indicator stays unlit.
    My print settings are 600dpi or 300dpi, print sharpening Standard/Glossy, 16 bit output. And Color managed by printer (because I let the Canon driver managing my B&W prints).
    Strangely enough, when I launch a print from Preview application, the drivers does its job and sends it successfully to my Canon iPF5000...
    As this was driving me crazy, I have tried a clean install of MacOS 10.8.3 (as 10.8.2 is no more available from Apple servers...). No success, same blocking issue.
    Eventually, I've found the workaround: using the imagePROGRAF Advanced Preview. You have to click on "Print..." in Lightroom in order to see the driver settings window, and then check the "Preview before printing" option in the main tab of the driver settings. Then I can preview my Lightroom printing work and then launch successfully my printing.
    Simple workaround, but very strange bug...
    For me, the root cause could be multiple and not very obvious.
    Is it Mac OS 10.8.3 ? But why can I make prints from Preview application for instance, and not from LR ?
    Is it the Canon driver ? But this lead me to the same question.
    Is it Lightroom ? Does it send corrupted data that make the driver crazy but not the imagePROGRAF Advanced Preview ?
    So, if any user of Canon iPF5000 + Mac OS 10.8 + Lightroom is around, please share your experience.
    And if any Apple, Adobe or Canon engineer read this, please try to fix this.
    Happy printing,
    Amaury

    It's different how applications write print data. If you use Advanced Preview from the driver then it calculates already the output which afterwards is only sent to the printer.
    Have you once tried to print with fast graphic process switched off (option of advanced settings)?
    Hope it helps
    Renate

  • A funny bug with the pair Numbers + AppleScript

    *Bug ID# 7973914*
    Summary:
    Trying to delete rows in a Numbers table thru AppleScript issue an erroneous error.
    Steps to Reproduce:
    Create a new Numbers document and run this script :
    set t_name to "testIfEmpty"
    tell application "Numbers" to tell document 1 to tell sheet 1
    if not (exists table t_name) then
    make new table with properties {name:t_name, row count:1, column count:1}
    end if
    delay 0.2
    set tProps to get properties of table t_name
    set nbr to (row count of tProps) - 1
    if nbr > 0 then
    try
    repeat nbr times
    delete row 1 of table t_name
    end repeat
    on error errMsg number errNbr
    display dialog "What's the need for this error ?" & return & return & "error number : " & errNbr & return & errMsg & return & return & "Click the OK button" & return & "and everything will behave flawlessly." buttons {"OK"}
    end try
    end if
    set nbr to (column count of tProps) - 1
    if nbr > 0 then
    repeat nbr times
    delete column 1 of table t_name
    end repeat
    end if
    end tell
    Expected Results:
    As we may delete the rows by hand, the script is supposed to do its job with no error.
    Actual Results:
    When it remains two rows, the script issue an error.
    When we click the OK button, it continue and it does what it was designed to do.
    Regression:
    At this time, in real life I keep only :
    try
    repeat nbr times
    delete row 1 of table t_name
    end repeat
    end try
    in the script but I don't like to encounter a meaningless error message
    May you get rid of that ?
    I wish to add that I am unable to think that getting a 2 * 2 cells table when asking for a 1 * 1 one is a normal behaviour !
    Yvan KOENIG (VALLAURIS, France) mercredi 12 mai 2010 17:09:37

    For sure, with remove there is no error message
    but the dictionary is clear :
    A row, as well as a column is an item.
    I would accept that the app refuse to execute the command delete row x or delete column y.
    It accepts to delete rows 150 thru 3 but when there are only two rows, it refuses to delete one.
    In my code, I delete row 1 because I want a table with only a standard cell.
    There is no logic in the fact that I may delete column 1 with no errror message but can't do the same with row 1.
    The proof that there is no reason is of course that with the try / end try enclosing the loop, the row is correctly delete. The script just ignores the reported error.
    It's always wrong to flag an error when there isn't one.
    The dictionary describes the function duplicate which is supposed to apply to items.
    I was grinding when I discovered that it refuses to duplicate a table or a sheet but at least, it's concistent. It doesn't do 99% of the job and claims "you are fool to ask me to do that" for the last percent.
    Delete / Remove isn't the unique odd pair.
    I got the same kind of problem in several apps with Copy / Duplicate.
    Sometimes they behave the same. Sometimes, one is completely rejected
    and, worse case, sometimes one of them behave well most of the time but not always.
    I think that it would be correct to
    (1) edit the code so that both behave correctly in 100% of cases
    or
    (2) edit the code so that the 99% one completely reject the call
    This said, I'm definitely pig-headed but I'm not completely foolish so,I will edit my script and use Remove
    PS :
    I added these two lines to my report :
    I forgot to write that replacing Delete by Remove get rid of the error message.
    But there is no reason to issue one with delete.
    Yvan KOENIG (VALLAURIS, France) mercredi 12 mai 2010 18:33:07

Maybe you are looking for