Bank Key for Brazil .

I am working on Upgrade project to ECC 6.0 we have a 8 Digit Bank key (SAY 12340001) . Which is used, Now SAP has created following validation for BANK number for Brazil. That My 5th Digit should not be 0. So it's throwing Error. How Can to handel this?
Validates a Brazilian bank number
The bank number has 3 parts: BBBCAAAA
BBB         = Bank
C           = Code (Branch)
AAAA        = Agencia (1 to 4 digits, no leading zeros!)
This algorithm verifies that the agency number has no leading zeros
(According to this bank key should not have 0 as a fifth digit.)

Dear Darshan,
In transaction OY17 select BR (Brazil) and go to the end of page.
In Further Check there is a field "Bank Data".
Please, check if this field is flaged. I don't think it's necessary in Brazil (Check in Help, F1).
I've checked without any flag and could created as you wish.
BBBCAAAA = 23720410
I hope it helps.
Thanks a lot.
Cássio Moreira
Brazil

Similar Messages

Bank Key for my Company Code not in the list of Bank key in J1INBANK

Hello Expert,
I did create a house Bank in FI12 (using this transaction code only) and it does appears in T012 table, however I am not able to select the Bank Ke asoosciated with the house bank when I am trying to update Bank Challan in J1INBANK?\
Could you please help me with the possible reasons? Is there any other configuration required other than in FI12?
Please help.
Regards
Sandip

Dear,
When you press F4 in Bank Key Field, it will shown only those Bank Keys which are assigned to your House Bank.
So please ensure whether you have assigned the Bank key in FBZP which you have created through FI12.
Hope this helps!!!
Br, Vivek

Bank key vs Electronic Bank Statement

Hello,
What is recommended by SAP is to have bank key for house bank the same as SWIFT code. I have case now that bank from Turkey has TGBATRIS Swift code and the same i use as bank key. But when they have sent bank statement and i import it using FF.5 it looks like in field 25: (where the bank account is delivered) they provide this data ':25:277/6296649'. So 277 is bank ID and after slash / we have bank account ID. Problem is that error comes up when i have bank key TGBATRIS as no bank account 6296649 is found for bank key 277. So it looks SAP is recognizing first part 277 as bank key that should be customized.
Is there any way to use bank key as SWIFT and not asking bank to change bank statement format of field :25: ?
Thanks for info.

Look if you can get in the house bank this information in the field Alternative Bank Acct Number
If you have house bank accounts with identical account numbers and use the electronic account statement for these accounts, then you enter the internal key used by your house bank here (usually the account number with attached currency encryption). If you use the manual account statement, then you can freely assign the alternative account number. Using bank account number + currency code is, however, recommended

1 House Bank with 2 Bank Keys?

Hi all,
I am once again opening the same question....
Can we have 2 Bank keys with 1 house bank?
RK
As the Moderator has closed the message. I am asking why? The 1 line question is not so easy ok. Please let me know the how can we assign 2 bank keys for only 1 house bank. This is the Client requirement. Bank Of America has 2 bank keys and they want only 1 house bank only.
Please answer the above question.
Moderator: Please, don't close question.
Moderator: As before, please avoid asking basic questions. This is basic understanding of bank definition in SAP. Please, read help.sap.com before posting

Hi Murali/VIvek,
Thanks for the reply.....
Yes, I know that it can't be created but the client requirement is they want 2 Bank keys under 1 House bank only.
Is there any way to have this requirement to be fulfilled?
RK

Bank keys and house bank creation

Hi
My company have 9 branches all over India. HO of my organization is in Bombay.
Now every branch have bank account in respective city. 5 are Current account and 5 are Cash Credit account. But all these bank accounts are in one bank only say Bank ABC...
So how many bank key and house bank should be created? I am confused. I tried reading documentation on bank key and housebank, but my confusion is still there.

Hi,
The number of house banks depends on the branches of the bank.
You need to open a separate house bank for each bank's branch. For this, create a bank key for the bank branch in FI01 and then assign this bank key into the house bank in FI12 (Or directly create the bank key in Fi12 also)
Then within this bank's branch, if you hold more than one account then create seperate account ID for each account in that house bank.
Separate house bank for each branch helps in the faster processing of bank interfaces for payment and receipt, because then it will use the correct SWIFT code etc for that branch assigned to bank key in house bank.
Regards,
Gaurav

Bank Key IT0009

Hi Gurus,
The bank key used in IT 0009 is for employee bank account or for company bank account?
Again if it is for company bank account, then while transferring employee from one company to another is it required to chnage the bank key?
Regards,
Vishal

Hi,
The bank key used in IT 0009 is for employee bank account or for company bank account?
It is used to maintain IFSC code of Bank.
Again if it is for company bank account, then while transferring employee from one company to another is it required to chnage the bank key?
Bank Key will be changed based on bussines only , If EE bank account has been changed then have to change Bank key.
for Example each and every brach of banks will have their own IFSC codes
Thanks
Cheera

Bank Key, user definable?

Hi Expert,
I would like to ask whether SAP bank key is user-definable, or need to follow certain standard, naming convention specified by each bank/country?
This is becuase I found that I need this bank key for my electronic bank statement settings ...
Section: Assign bank account to transaction types,
and if I create bank key without following standard, how can bank file sent by the bank detect my bank key correctly?
Thanks and regards,
sbmel.

Dear Sbmel,
Please visit the following link: http://www.ecbs.org/iban.htm
You will find there information about bank key rules- at least for IBAN countries...
Otherwise, like stated above- it is a part of country specific checks, IMG path as follows:
SPRO-> SAP NetWeaver-> General Settings-> Set Countries-> Set Country-Specific Checks.
Regards,
Milen.

BANK KEY -VENDOR

Hi
In may clients organisation i have created different Bank key for Vendors for eg:salary for SBI vendor 1,ICICI Vendor 2 etc
I have created new vendor in the month of Feb 2010 for IDBI and Andhra bank.These accounts were opened by employees in the month of Feb 2010 and salary processed /paid and posted.
Now in the month of March 2010 for these employees i am unable to POST .
MESSAGE IS POSTING BALANCE IS NOT CLEARED FOR 11/2009(MESSAGE IN RED)
COULD SOMEBODY GIVE A SOLUTION ASAP SINCE POSTING HAS TO HAPPEN IMMEDIATELY
REGARDS
RAMESH

Hi,
Please see the following step for Bank Key Vender.
PE02 => Program Name => Z070 => see there is created net wage pay or not. If not then create nod for the same net wage type code. this is required for bank code.
Santosh R. Shivane

Bank Key - FI01

Hi All,
For a company code how many bank key should we create.
Can I create just one and create all house banks within this master key, I mean for different banks, say..CITI, Lloyds, RBS.
Or do I need to create separate master key for each bank.
What is the ideal solution ?
Thanks
Anil

Hello,
Bank Key is the Master Data and it contains the details for the companies address. you can create the bank keys based on the address of you house bank and you can create multiple bank keys if the you have the account with the same bank at multiple location.
For example. if you have account with AXIS Bank @ Mumbai and Kolkatta branches the create a separate bank key for Mumbai A/c and Kolkatta A/c.
Hope i am Helpful to you
Best Regards,
Ravi Reddy

Bank Key field change from database table

Dear All,
At our client, 4 house banks are maintained. The bank keys entered for these are not BSR Codes but something like 100,200,300,400.
This is not correct as we need to maintain BSR Code in Bank Key field as it is required on Form 16 A (TDS Cetificate)
The Bank Key field is in display mode. I am thinking of changing wrong value from database table T012 & BNKA .
Has anybody done this before? Will it affect my past or future transactions?
Thanks & regards,
Gov

Dear Gulshan,
What you are saying is correct & I subscribe to your view also.
Creation of House Bank all over again seems to be one of the better options.
We tried doing one more thing & which is working fine on Development.
Our primary requiremnt is to have BSR Code on the From 16 A. System picks up the Bank key for this.
We copied the standard Form 16A & created a Z. Then abaper created a subroutine. It is like when Bank key 100 comes to Form16A, replace it with say 0098500 (Correct BSR Code of the Bank)
This helped to get the correct BSR Code in Form 16A & saved us from recreation of House Bank data.
Your comments are welcome.
Regards,
Gov

Bank detials Maintained in Vendor master data with out Sort code / Bank Key

Hi
We have a Requirement of creating Japanese bank details in Vendor Master Record. But No Bank key / sort code is available.
Even for Russian Bank accounts we donu2019t have any bank key / sort code available from client.
System does not allow to create vendor bank details with out providing Sort code/ Bank key details.
Is there is any way of creating bank details in Vendor master data with out giving Bank key details.
Regards,
Karunakar.

Hi,
I assume you fill in Sort Code in bank number field.
In my company, our bank number is set not to duplicate bank key.
So bank key is simply a reference. And our bank number field is not mandatory.
If you follow these settings, you can create an abitrary bank key for your vendor bank account.

Creation of Bank Key

Hello sir
Can anybody tell me what is Bank Key in FBZP. From where this number I will get?
Thanks
Vinayak

Hello Sir
Thanks for reply.
Pl tell me, bank key can be numeric only or alphanumeric ?
I want to create bank key for Shamrao Vithal Bank.
Regards
Vinayak

Help for relationship between Housebank - Bank Key - GL Account

Hi Experts,
Im on Bank limit report development for that I need to get GL accounts( both main and sub GL accounts) of a bank key. I found some transparent and maintanance tables to relate the fields as reference. ( BNKA, SKB1, T012 & T012K)
Instead of this, I would like to know is there any Function Module or correct relationship tables available to fetch the GL accounts of Bank key?
Pls share your knowledge.
thanks & regards
sankar.
Edited by: sankar babu on Nov 18, 2008 8:38 AM

Hi,
House banks and company code are in the table T012K.
The field HBKID (Short key for a house bank) is also present in tables SKB1 and T012K.
Regards,
anver

Vendor Bank Details - Bank control Key for Spain

Greetings,
Can anyone tell me how to maintain the bank control key for Spain in the vendor master data? I can see that Spain uses the key to check the combination of bank number and bank account number, and it looks like the validation points to table BNKAIN. However, where do I get the two digit bank control key (from the vendor?), and how do I maintain it in the table (this table is buffered)?
Any advice you have would be greatly appreciated, and I will gladly assign points for helpful responses.
Thanks!

Hi Eric,
Thank you for your quick response. My problem is not location of the field itself, but rather on what data to use to populate the field. There is no input help for this field, and the system issues an error message every time I try to populate the field. We ran a trace and discovered that the system appears to be running a check against table BNKAIN. I think perhaps I need to maintain that table, but cannot figure out how to access the table to maintain the entries. Do you know how to maintain this table, or is there a specific bank control key that should be used for Spain?

Bank Control Key for Spain

Does anybody know how the Bank Control Key works for Spain.
The help on the field LFBK-BKONT is not that helpful.

Hi,
This is a key for checking the combination of bank number and bank account number. Permitted length, characters and other country information for Spain are :
The bank key has eight digits (4 positions stand for the bank number + 4 positions for the branch), is numerical, and without gaps.
The bank account number has 10 digits, is numerical, and without gaps.
The control key has 2 digits and is numerical.
The bank key, the bank account number and the control key are checked simultaneously.
If an error message is displayed when entering bank data, you should check whether data has been entered correctly. Here's a sample.
Country Bank key Bank account Control key
Spain 00120345 0000067890 03
Hope this helps. I had copied this from a note long back and can look for the actual note if required.
Cheers !

Bank Key for Brazil .

Similar Messages

Maybe you are looking for