Bank Key, user definable?

Hi Expert,
I would like to ask whether SAP bank key is user-definable, or need to follow certain standard, naming convention specified by each bank/country?
This is becuase I found that I need this bank key for my electronic bank statement settings ...
Section: Assign bank account to transaction types,
and if I create bank key without following standard, how can bank file sent by the bank detect my bank key correctly?
Thanks and regards,
sbmel.

Dear Sbmel,
Please visit the following link: http://www.ecbs.org/iban.htm
You will find there information about bank key rules- at least for IBAN countries...
Otherwise, like stated above- it is a part of country specific checks, IMG path as follows:
SPRO-> SAP NetWeaver-> General Settings-> Set Countries-> Set Country-Specific Checks.
Regards,
Milen.

Similar Messages

Bank key

Hi
all
can we assign vendor's bankey key or customer's bank as a Housebank bank'skey
if any restrictions for this plz clarify
Mant Thanks
MvNr

Hello,
Bank keys are defined at country level.
The bank key is nothing but it is identified the branch with a unique key.
The key that is going to enter in vendor master is the bank (branch) in whcih your vendor is having the account. But it is not what you have mentioned in the house bank in FI12. This is the house bank in which you are having account. Incidentally, if you and your vendor is having accounts in same branch, then the bank key will be the same for your and your vendor. In such case, you can enter the same bank key in vendor master.
Hope I am clear.
Regards,
Ravi

How to create a Foreign key relationship between 2 user defined tables...

Hi Folks,
I have created two user defined tables... Where in i want to create foriegn key relationship between the 2 tables.... Can anyone guide the step by step procedure to do this scenario...
Any help would be highly appreciated...
Thanks

Hi
1. In the 2nd table call the field of the 1st table which is a primary key.
2. Give the same field and dataelement name.
3. Select that field and then click on the foreign key field icon which is beside Search Help button.
4. Then give short text, and the 1st table name.
5. Then in the below box give the 2nd table name and 2nd table field name which you have called from 1st table.
6. Then click on copy, then u will be able to see Check table name and check table field name beside foreign key table name.
7. Then again click on copy.
Regards
Haritha.

User Table Key set up in User defined field management

Dear Expert,
what is use of User Table Key set up in User defined field management in SAP B1.
Thanks.
Sridharan.R
Edited by: Sridharan.R on Oct 4, 2011 8:26 AM

Hi,
Once a UDF is created and a value is entered in it, the same cannot be retrieved in any of the layouts and reports unless a Key is generated for that UDF. By assigning a Key to that UDF, the same UDF can be used in Crystal Reports or any other Reporting tool to extract its values from SAP. These reporting tools searches the Uniqueness of the UDF Values with this Keys only.
For eg.: When you develop a report and select a table from which you need the fields to be shown in the layout. In that, the only fields whose keys are generated are only available to use in the report.
Hope its clear to you.
Regards,
Papil

Launch programs with User defined Keys?

Im using 10.6.4 on a Macbook Pro and on the 1 screen im using 3 different programs at once (2 music programs and Parallels / Windows Program)
Is there a quick way to flip between the 3 very quickly as I like to view all 3 very quickly and chop and change between them on the Macbook Pro screen
I use Apple + Tab but this gets tedious trying to flip around between them going left and right
Does 10.6.4 allow you to user define keys to certain programs so you can launch and they become active?
ie: F1 - launch program 1, F2 - Launch Program 2 etc
So 1 button push makes a certain program active?
I was used to Windows, whereby everything stayed in a dock at the bottom and you could just launch any program at any time
I love Mac OS X but the only way I can find is either the Apple+Tab which gets tedious, or a Hot corner which i have set up and "spreads out" the programs : then again with hot corners your still having to chase around all your open windows!
Is there a quick easy solution for having up to 3 programs at once and instant access that I don't know about? With audio editing, i chop and change edits to see how they fit between programs so this would be invaluable
I'm pretty sure OSX would have something under the bonnet to do this?
Thanks

pitchfork wrote:
I was used to Windows, whereby everything stayed in a dock at the bottom and you could just launch any program at any time
Hi,
Um, so far as I'm aware this is the same behaviour in OS X. Launched programs that are not added to the Dock are appended to the right of the Dock, but applications in the dock do not move randomly - unless you count the fact that the Dock expands to include newly-added or -launched applications. To achieve what I think you're referring to, simply add the applications you use frequently to the Dock permanently, and use the same behaviour you were accustomed to in Windows to switch applications.
However, if you want to create a simple keystroke to switch to another application (whether open already or not), then try creating a new Automator Service to activate a given application, and assigning a keystroke to it. I've never actually created a working Automator action before, but I believe the following should work:
1) Launch Automator
2) Select "Library" in the left-hand column, and type "Applescript" in the search box.
3) There will be only one result, "Run Applescript." Drag this into the right-hand column.
4) Copy and paste the following script to replace the words "(* Your script goes here *)":
tell application "Amadeus Pro"
activate # switch to your application, launch if necessary
end tell
5) Replace "Amadeus Pro" with the name of the application you want to switch to. KEEP the inverted commas.
6) Make sure the drop-down menu in the top-right is set to "any application."
7) Choose "Save" from the File menu, and assign an appropriate name; this is how your Service will appear in the Services menu. You can now close Automator.
8) Finally, assign a shortcut in System Preferences » Keyboard » Keyboard Shortcuts » Services.
Give that a shot and see whether you're happy with it. Rinse and repeat with the names of the other applications if satisfied
Hope that helps,
S.

Defining keys on user defined tables

Regarding tables of type 'lines' (in document or master data).
I want to define a unique key for the DocEntry fields and some other user-field (so I could restrict the user to add only 1 type of line for each master record), but the problem is that keys can be defined only on the user-defined fields.
Is there any way around this?
I can easily go to the SQL manager and add this unique index myself, but will that harm my SBO system in any way?

Hi Avi,
A formatted search is a customization functionality in SBO that doesn't require SDK to work. It allows a field to be selected from a list of values that you can enter or query. It also allows you to display in that field an automatic values that triggers when a value in other field changes. More information in product training :).
It has some limitations, but using it smartly can be very helpful. A very basic way to use it is copying a value from one field to another (like DocEntry or Code). In a default form it'd be like $[$3.DocEntry], where 3 is the ItemID and DocEntry is the ColumnID. You save it in the query manager, and the focus on the field you want to assign the formatted search and do it using AltShiftF2. Anyway have a look at the official SBO training.
Hope this helps,
Ian

Does Map Support User-Defined Object As Key?

Hi,
Map m = new HashMap();
m.put(myobj1, "Hello");
m.put(myobj2, "World");
I'm using my own object as the key for the map.
Since the key is a user-defined object, I would need to overload the equality operator in order to get the value.
Now, if I would to do something like this:
MyObj myObj = (MyObj)m.get(myobj3);
I found out that the equality operator for MyObj never even executes (by printing out some message). But if I would to retrieve using the original myobj1 and myobj2 object, then only the equality operator would get executed.
If I would to do the above using the String object instead of MyObj, the equality operator works fine.
I can't seemed to find a reason for the above behaviour. Any ideas?
Thanks in advance.

In a hashmap, the object is located/stored by calculating its hash code. Therefore, you need to also override the hashCode() method of the Object class so that the same objects return the same hashCode, so that you can retrieve your objects.

Repost: User-Defined Access Keys Script (PHP)

Hey guys -
I'm in need of a *PHP 5* script that will allow users to set
their own
access keys for predefined pages. I found this script and
neither like the
fact that it's in PHP 4 and the way the output looks (e.g.,
needing to check
the checkbox) -
http://juicystudio.com/article/user-defined-accesskeys.php
I've also run across this one which has the output format
that I want;
however, his only directions, which are only comments in his
script, are
extremely vague and unclear - for a _learner_ in PHP. Here is
his link -
http://cms.elfden.co.uk/2005/12/20/access-keys-revisted/#more-72
If someone has a solution for new learners and would be
willing to share it,
that would be wonderful. I'm hoping you can point me in a
good direction
with directions that are clear to understand. And just incase
you're
wondering, I did run across this one too - yet still, lacking
in directions
it's quite hard to follow and understand if you don't really
know a plethora
of PHP code -
http://www.blether.com/archives/2006/02/userdefined_acc.php
Again - if someone can take the time and find me a good
indepth tutorial
explanation or something along those lines (perhaps you may
even have a
script you wish to share), I'd be very grateful.
Thanks to everyone who has been helping me along the way with
my PHP.
Shane H
[email protected]
http://www.avenuedesigners.com

I'm not too keen on creating my own PHP script, but perhaps
in the
near-future you should write up a PHP5 solution...
Thanks though, Thierry.
Shane H
[email protected]
http://www.avenuedesigners.com
===============================
Proud GAWDS Member
http://www.gawds.org
===============================
"Thierry | www.TJKDesign.com" <[email protected]>
wrote in message
news:e52o7i$3bc$[email protected]..
> "Shane H" <[email protected]> wrote
in message
> news:e52gqc$nvh$[email protected]..
>> Hey guys -
>>
>> I'm in need of a *PHP 5* script that will allow
users to set their own
>> access keys for predefined pages. I found this
script and neither like
>> the
>> fact that it's in PHP 4 and the way the output looks
(e.g., needing to
> check
>> the checkbox) -
>>
>>
http://juicystudio.com/article/user-defined-accesskeys.php
>
> I wrote an ASP solution using a different logic:
>
http://www.tjkdesign.com/articles/user_defined_accesskeys.asp
> It may help you create a PHP version...
>
> --
> Thierry
> Articles and Tutorials:
http://www.TJKDesign.com/go/?0
> The perfect FAQ page:
http://www.TJKDesign.com/go/?9
> CSS-P Templates:
http://www.TJKDesign.com/go/?1
> CSS Tab Menu:
http://www.TJKDesign.com/go/?3
>
>
>

Wanted: User-Defined Access Keys Script (PHP)

Hey guys -
I'm in need of a *PHP 5* script that will allow users to set
their own
access keys for predefined pages. I found this script and
neither like the
fact that it's in PHP 4 and the way the output looks (e.g.,
needing to check
the checkbox) -
http://juicystudio.com/article/user-defined-accesskeys.php
I've also run across this one which has the output format
that I want;
however, his only directions, which are only comments in his
script, are
extremely vague and unclear - for a _learner_ in PHP. Here is
his link -
http://cms.elfden.co.uk/2005/12/20/access-keys-revisted/#more-72
If someone has a solution for new learners and would be
willing to share it,
that would be wonderful. I'm hoping you can point me in a
good direction
with directions that are clear to understand. And just incase
you're
wondering, I did run across this one too - yet still, lacking
in directions
it's quite hard to follow and understand if you don't really
know a plethora
of PHP code -
http://www.blether.com/archives/2006/02/userdefined_acc.php
Again - if someone can take the time and find me a good
indepth tutorial
explanation or something along those lines (perhaps you may
even have a
script you wish to share), I'd be very grateful.
Thanks to everyone who has been helping me along the way with
my PHP.
Shane H
[email protected]
http://www.avenuedesigners.com

I'm not too keen on creating my own PHP script, but perhaps
in the
near-future you should write up a PHP5 solution...
Thanks though, Thierry.
Shane H
[email protected]
http://www.avenuedesigners.com
===============================
Proud GAWDS Member
http://www.gawds.org
===============================
"Thierry | www.TJKDesign.com" <[email protected]>
wrote in message
news:e52o7i$3bc$[email protected]..
> "Shane H" <[email protected]> wrote
in message
> news:e52gqc$nvh$[email protected]..
>> Hey guys -
>>
>> I'm in need of a *PHP 5* script that will allow
users to set their own
>> access keys for predefined pages. I found this
script and neither like
>> the
>> fact that it's in PHP 4 and the way the output looks
(e.g., needing to
> check
>> the checkbox) -
>>
>>
http://juicystudio.com/article/user-defined-accesskeys.php
>
> I wrote an ASP solution using a different logic:
>
http://www.tjkdesign.com/articles/user_defined_accesskeys.asp
> It may help you create a PHP version...
>
> --
> Thierry
> Articles and Tutorials:
http://www.TJKDesign.com/go/?0
> The perfect FAQ page:
http://www.TJKDesign.com/go/?9
> CSS-P Templates:
http://www.TJKDesign.com/go/?1
> CSS Tab Menu:
http://www.TJKDesign.com/go/?3
>
>
>

User defined keys on Msoft laser 5000 launches wrong programme

Running Firefox 4.01 and Fast dial 3.4, pressing user defined key 1, which is set to open office calc.exe. opens itunes.exe

It doesn't sound like a Firefox problem somehow. See http://support.microsoft.com/kb/303091

How to handle form close event or escape key press event for user defined f

Experts,
Please let me know how to handle form close event or escape key press event for user defined form...
Thanks & Regards,
Pravin.

Hi
You can catch the form close event like this
If ((pVal.FormType = 139 And (pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_CLOSE)) And (pVal.Before_Action = True)) Then
      Try
               SBO_Application.SetStatusBarMessage(pVal.EventType.ToString())
      Catch ex As Exception
                SBO_Application.SetStatusBarMessage(ex.Message)
        End Try
      End If
Hope this helps
Regards
Arun

Optional user-defined destination sort key

I want to use user-defined destination sort key to control JMS message priority. Not all the messages contain the message property this sort key uses. When the message property is not present, what is the sorting behavior? Will messages be sorted by the message priority first, and if it doesn't exist, then messages be sorted by default i.e. by JMSMessageID?

Hi,
          If you're using the "JMSPriority" field, then all messages have a value, and the default value is 4 (set by the JMS specification). In WebLogic, the default priority can be set to a different value via a connection factory configurable attribute.
          If you're using a JMS message property, then the behavior is different. For sorting purposes, I think the defaults for numerical types are their minimal possible value "MIN_VALUE", for the boolean type is "true", and for the string type is the empty string ("").
          By the way, I recommend using header fields (such as JMSPriority) for sorting - this can aid performance significantly in the case when there are many messages on the destination and/or when messages are paged out.
          Hope this helps,
          Tom

Change House Bank, Bank Key #

FI Experts
I need to change current Bank Key # ( ABA) as the bank is changing its (ABA) I tried FBZP, but I don't have the option, I also tried FI02 but could not figure it out. Does any one knows how to change it? IS this somethign that must be done thru IMG or the user can do it. I don't need to create new Bank just change the Bank Key
Your help Will be appreciated
Edited by: Frank on Jun 25, 2009 12:02 AM

Go to IMG...
Financial Accounting, Bank Accounting, Bank Accounts, Define House Banks...
here is where you add the new bank key.
You also have to go to the following...
Financial Accounting, Bank Accounting, Business Transactions, Payment Transactions, Electronic Bank Statement, Make Global Settings for Electronic Bank Statement...
here is where you have to assign bank accounts to transaction types
Our bank recently changed their ABA number. The problem we had were checks that were issued under the old number had problems when we uploaded the bank BAI files that contained the new ABA number.
I would advise going into a test environment and evaluate the results of making the change so that you understand how it will impact the process of importing and posting the files received from the bank.

Bank Key, Bank Number and SWIFT code

Hi expert,
I would like to consult your expertise on the following issues: Bank Key, Bank Number and SWIFT code.
In Country Field Check, OY17, If I select the bank key (section key for bank directory) options 4, assigned externally; then in FI01 bank key data creation, my bank number (in control data section) can be freely defined.
If in OY17, my bank key option is 1, bank number. Then, during FI01 bank data creation, my bank number must be same with bank key.
My question is that: I would like, in OY17, selection option 4, but I would like to have some clarifications on FI01 bank creation as well as electronic bank statement ( section of: Assign bank account accounts to transactions types): In the section of Assign bank account accounts to transactions types, I need to fill in bank key+bank account and transaction type.
My Questions: during MT940, electronic bank statement (EBS), since I set bank key + bank account, what control data (in FI01 screen) that SAP will use for automatic EBS? Bank number or SWIFT code?
Besides that, I am not quite understand statement by SAPPress book, Quick Reference Guide Financial Accounting with SAP - Chapter 7 Banking, as follows:
If you use the SWIFT code as bank key in a specific country, we strongly recommend that you set the bank data flag on the further checks section in OY17. This ensures that the system automatically performs the formal control on the SWIFT code entered in the SWIFT code field (BNKA-SWIFT), and not on the SWIFT code entered in bank key.
Thanks in advance
sbmel

Hi,
House bank is the bank through which your company is dealing all their financial transaction.
Bank key is a country unique number in the US it is called the ABA routing number.
The account ID is a user definable field that allows you to "name" your bank accounts at your bank using any convention you prefer.
Bank master data means all the data related to a particular BANK .examole HDFC all the information related this particular bank.
House bank master data it is related all your bank master data.Example,Hdfc,ICICI,Axis ,BOB etc.
The S.W.I.F.T. code is used for identifying banks in international payment transactions.Uniquely identifies a bank throughout the world.
Bank number is a code given to a particular Bank.
regards,
Santosh kumar

Confirmation of User defined fields on CO11N

Dear All,
Can anybody tell me how to confirm user defined field during operation confirmation of an order. I have created a user field key and assigned in the operation detail screen in routing. Is it required to include a freely defined screen for CO11N in customizing or any other setting is there.
Thanks in advance for your valuable inputs.
Regards,
Uday Parchure

<b>Define Customer-Specific Detail Areas for Single Screen Entry</b>The following enhancement is available for production orders:
CONFPP07 define detail areas for single screen entry
With this enhancement you can define your own detail areas (screens), which can be issued for single screen entry of time ticket confirmations.
Enhancement CONFPP07 contains the following enhancement components:
Function module exits
EXIT_SAPLCORU_S_100 Transfer data from SAPLCORU_S to customer-defined screen
EXIT_SAPLCORU_S_101 Return data from customer-defined screen to SAPLCORU_S
Display documentation
Screen areas
Screen areas that you can define yourself are available.
Activities
1. Create the enhancement
To do so, create a new project, or use an existing project.
2. Activate the project.
Your enehancement only takes effect after you have activated it.
Further Notes
Enhancememnts, as opposed to modifications, are fundamentally independent of releases since they are not made in the SAP original, but in a name space that is reserved for customers.
you have to create a customer defined screen and attach as in the link. Add the Freely definable detail screen in OPK0. Confirm the user defined fields.
Regards
MSR
Message was edited by:
Soundararajan Murugesan
Message was edited by:
Soundararajan Murugesan

Bank Key, user definable?

Similar Messages

Maybe you are looking for