Bank key

Hi
all
can we assign vendor's bankey key or customer's bank as a Housebank bank'skey
if any restrictions for this plz clarify
Mant Thanks
MvNr

Hello,
Bank keys are defined at country level.
The bank key is nothing but it is identified the branch with a unique key.
The key that is going to enter in vendor master is the bank (branch) in whcih your vendor is having the account. But it is not what you have mentioned in the house bank in FI12. This is the house bank in which you are having account. Incidentally, if you and your vendor is having accounts in same branch, then the bank key will be the same for your and your vendor. In such case, you can enter the same bank key in vendor master.
Hope I am clear.
Regards,
Ravi

Similar Messages

Help for relationship between Housebank - Bank Key - GL Account

Hi Experts,
Im on Bank limit report development for that I need to get GL accounts( both main and sub GL accounts) of a bank key. I found some transparent and maintanance tables to relate the fields as reference. ( BNKA, SKB1, T012 & T012K)
Instead of this, I would like to know is there any Function Module or correct relationship tables available to fetch the GL accounts of Bank key?
Pls share your knowledge.
thanks & regards
sankar.
Edited by: sankar babu on Nov 18, 2008 8:38 AM

Hi,
House banks and company code are in the table T012K.
The field HBKID (Short key for a house bank) is also present in tables SKB1 and T012K.
Regards,
anver

Bank key during creation of house bank

Hi,
When we create a new house bank via FI12, we need to specify the bank key. The problem here is that the bank key is system generated. Usually for creation of house bank, we will create in development and transport to PROD. However, we have problem where the bank key in development is NOT the same as that in PROD.
Does anyone have this problem?
Thanks & rgds,
Yvonne

Hi Yvonne,
In our systems the bank key is not automatically generated by SAP. We have it setup so that we designate the bank key and since bank key is master data, we are able to create it manually in each of our systems or ALE it over to the systems that require the information. So we do not run into the issue you've described above.
Regards,
-Anya

Problem with Bank Key in IT0009

I have an EE who has a bank routing number of her Checking Account with a US Bank. When I try to save this information for her ACH transfer there is an error - This US Bank Key -
doesnot exist.
There is nothing wrong with the Key since the EE is paid to the same account in Legacy.
Can anyone help please ??
Thanks

Here is the link to get the file https://www.fededirectory.frb.org/. Once
in the site click on Download E-Payments Routing Directories. If they have
questions there is a Frequently Asked Questions page that deals with issues
related to downloading the file.
You can use RFBVALL_0 to upload the data into SAP.

House Bank Key Issue

Hi,
In our company, there is a House Bank ABCD and House Bank Key XXXXXXXX for Plant 1. Account deptt. do bank reconciliation and no issue with that..
But suddenly last month, by mistake we create a House Bank key ZZZZZZZZ for Plant 2 and assign it to House Bank ABCD. In this month, account deptt. done the bank reconciliation for plant 2 with this... Now bank reconciliation has been done for Plant 2 this month..
Now when account deptt. want to do bank reco. for Plant 1, he found the mistake...
Now how can we correct this issue... because Bank reco., is done for Plant 2 with diff. House bank key and wrongly assigned House Bank....and for Plant 1, it is pending..
Please guide.
Can anybody help me???

hi
for the house bank key to work you have to assign the bank gl in FI12 and then in FS00 in bank tab
give the house bank and the account id
You cant use the same gl for the new bank id created.
Kind regards
Arman
SAP FICO
Edited by: akausar on Nov 8, 2011 6:09 PM

Bank key vs Electronic Bank Statement

Hello,
What is recommended by SAP is to have bank key for house bank the same as SWIFT code. I have case now that bank from Turkey has TGBATRIS Swift code and the same i use as bank key. But when they have sent bank statement and i import it using FF.5 it looks like in field 25: (where the bank account is delivered) they provide this data ':25:277/6296649'. So 277 is bank ID and after slash / we have bank account ID. Problem is that error comes up when i have bank key TGBATRIS as no bank account 6296649 is found for bank key 277. So it looks SAP is recognizing first part 277 as bank key that should be customized.
Is there any way to use bank key as SWIFT and not asking bank to change bank statement format of field :25: ?
Thanks for info.

Look if you can get in the house bank this information in the field Alternative Bank Acct Number
If you have house bank accounts with identical account numbers and use the electronic account statement for these accounts, then you enter the internal key used by your house bank here (usually the account number with attached currency encryption). If you use the manual account statement, then you can freely assign the alternative account number. Using bank account number + currency code is, however, recommended

Imapct of bank key length increase in OY17

Hi Folks,
Regarding Vendor Master (Payment transactions view).
Bank Key field length is set for 4 digits for MEXICO. The request is to increase the same to 6 digits.
Provided I just change the length of the bank key from 4 (and checking rule 6) to 6 , will there be any repurcussions?
What additional checks to be taken care of before completing such a change.
Thanks

check the bank keys in existing mexican vendors whether they fit to your new setup, or if they will create an error while maintaining this vendor in any other field.

1 House Bank with 2 Bank Keys?

Hi all,
I am once again opening the same question....
Can we have 2 Bank keys with 1 house bank?
RK
As the Moderator has closed the message. I am asking why? The 1 line question is not so easy ok. Please let me know the how can we assign 2 bank keys for only 1 house bank. This is the Client requirement. Bank Of America has 2 bank keys and they want only 1 house bank only.
Please answer the above question.
Moderator: Please, don't close question.
Moderator: As before, please avoid asking basic questions. This is basic understanding of bank definition in SAP. Please, read help.sap.com before posting

Hi Murali/VIvek,
Thanks for the reply.....
Yes, I know that it can't be created but the client requirement is they want 2 Bank keys under 1 House bank only.
Is there any way to have this requirement to be fulfilled?
RK

Vendor Master - Bank Key

Hi Guys,
In the vendor master , under the bank details , we have a field called BANK KEY.
What is the significance of this field and does it mean the Bank Key of the vendor bank or our house bank?
Pls clarify.
Thanks,
Srikanth.

Bank Keys means the vendor bank, we usually use bank number in the control data as the bank key (T-code: FI01).
In vendor master, if vendor has multiple bank accounts, identify 'Partner Bank Type' for each vendor bank account. Specify the 'Partner Bank Type' during invoice posting otherwise the first line would be default for payment.
Partner Bank Type
Key you enter in the line item to specify which business partner's bank the system should use.
Procedure
In the business partner's master record:
If several bank accounts exist in a customer or vendor master record, you can assign different keys for these accounts.
In the item:
To use a particular bank of the business partner for the payment of an item, enter the appropriate key in the item. The payment program then pays the item via the business partner's predefined bank.

What is bank key in house bank configuration

hi
what is bank key in house bank configuration. is bank key same as our bank routing number.
thanks,
monica

Hi,
You specify the bank key under which bank data from the respective country is stored.
Basically, your banks are managed by using their bank numbers. The bank number and the bank key are almost same for the house bank.
Like you said, you may define a 9 digit number that serves as a routing number too.
Hope it clears your doubt.
Assign points if helpful.
Regards,
NareN.

Z4 report Foreign trade regulations SCB indicator (central bank key)

hello all,
i was wondering what is triggering the Z4 report Foreign trade regulations report?
Is it the SCB indicator (central bank key)?
If an invoice is missing that indicator, could it be that the report shows no output?
You can find the indicator in FB03, go to the line item of the vendor, 'more data' tab.
Actually the indicator is triggered in MIRO from materials management.
If the indicator is missing, can it be inserted through another transaction code? I have tried in FB02 but the central bank key indicator isn't changeable...
Regards,
Pamela

Hi Pamela Mungur,
I came across your thread in SDN regarding Z4 report, I am very greatful if you share your experience on below point:
1. Is SCB indicator always need to input while posting Invoices (MM or SD) or Can we input while posting Payment also.
2. How can we Ensure, user always enter SCB in transaction data, as i cannot make it as mandatory at Field status definition level.
3. I unable to find the Field to input SCB value while creating invoice through SD module.
Thanks in advance for your valuable time and effort. Please feel to ask to create new thread if required.
Thanks...Venkat

HOUSE BANK - Account ID, Bank Key, Swift Code

Hi All,
I hv doubt in customisation of a house bank. While configuring a house bank, we need:-
1) Account ID
2) Bank Key
3) Swift Code
could anybody please explain what is the role of these 3 items when we run Automatic Payment Programme & manual bank reconcialtion of any house bank.
Thanks in advance
Deepak Garg

Hello Deepak,
I try to explai as my best:
1) Account ID:
This is uinique ID for bank a/c no. To identify ur bank under same house bank. here u will be giving the gl a/c for each bank. for ex:
In SBI u have one current a/c and one loan a/c. u will create one SBI house bank and two a/c id's which is for current a/c and loan a/c.
2) Bank Key:
This is an identification for ur house bank. i.e. each branch will have a unique bank key. thats how u will identify the house banks.
3) Swift Code:
The S.W.I.F.T. code is used for identifying banks in international payment transactions. for ur payments in other currency or foreign currency ur bank needs to have a SWIFT code.
Thanks
Murali

House bank account id bank key

Hi which is correct one plz
25. Which of the statements are correct
(Y) (N) A House Bank and Account ID can be linked to one bank key
(Y) (N) A House Bank and Account ID can be linked to many bank key
(Y) (N) Many House Banks and Many Account ID can be linked to one bankkey
(Y) (N) A House Bank can contain many account Ids which are represented through Individual bank account numbers
thanks
Raju

Dear babu
u said according to me .....thats why...... i think ... u open for some more answ ..its ok i close thi s issue
Thanks
babu
i

F110 posted payment succeffully, but F-58 have bank key problem

Hi all expert,
i posted first payment successfully by using F110.
however, i would like to make second payment by using F-58, then system prompt me error message with "Bank data is missing for country SG bank key 641", message no. F5453.
if it is bank master problem, but why i can post payment successfully at F110 at first?
Please advice.
Thanks & Regards,
Totoro

Check the below in FBZP - Hose bank   or (FI12)
Double click on you bank master and check the below whether the bank key and country combination is correct.
Bank Country              IN      India
Bank Key                  123456
In F-58, what is the first screen you are getting and paste few details below for our ref.
Thanks

Bank keys selection on F110

Hi All,
In the Customer master data ->payment transaction,
There are two bank keys (of same country) with different Partner Bank Type 'A' , 'B' are assigned
In F110 For the documents of type Direct bank collect, for some documents selected the first bank key and for some documents selected the second bank key.
On what basis, these Bank key are selected F110 run?
Appreciated your quick response,
Thank you,
Swetha

The payment reference contains a key for customer line items which is passed on to the customer in the invoice. The customer should refer to the payment reference when making the payment.
For vendor line items, the key that the vendor passes on in the invoice is entered in the payment reference. In automatic payment transactions, the payment reference can be passed on again to the payee.
When an outgoing payment is made, the payment reference you specify is passed on to the relevant financial institute and from there to the payee.
When you are processing your account statement, you can use the payment reference to determine which items you have paid and then clear them.
PS: Check your field status variant of the posting key of the invoice and field status group field status (to the reconciliation account assigned in the customer or vendor master) - Make sure you have made these fields as optional, so that the user can enter the details.
Regards,
Ravi

Bank key

Similar Messages

Maybe you are looking for