Bank Select with Famton X7 and Logic Sttudio

Hi,
I'm a new user of Logic Studio and of this forum ... but I'm familiar with MIDI.
My Question: How can I send the right MSB and LSB for a program change to the Roland Fantom X?
For example the Patch *PRA 001* (So far ...)
There is only one Program Box in a track. I see no possibility to send these two Midi numbers together with my program number ...
this problem - with your help - will not be a big problem I hope ...
Many thanks in advance for your ansers.
Greetings
- Frank Schweizer

Hi Frank
In the instruments parameters box to the left of the arrange window you see the word program and a check box. Check that box to enable program changes. just to the right of the check box (by default) is a small dash - click there to select your bank change command. and just to the right of it, you see a 0 and an up and down arrow, there is where you choose your program change
By default when you set up and instrument it uses control 0 and 32 for bank select commands, which I believe is standard for Roland. If yours is something other than that you can assign custom bank change messages in the environment
Hope this helps
Don

Similar Messages

SUGGESTION ON BEST External HD to work with Mac Air and Logic - for sample streaming.

SUGGESTION ON BEST External HD to work with Mac Air and Logic - for sample streaming.

huge storage, low cost, high quality, very small and portable.
BEST FOR THE COST, Toshiba "tiny giant" 15mm thick 2TB drive (have several of them, lots of storage in tiny package)    $100
http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48    /ref=sr_1_3?ie=UTF8&qid=1390020791&sr=8-3&keywords=toshiba+2tb
best options for the price, and high quality HD:
Quality 1TB drives are $50 per TB on 3.5" or $65 per TB on 2.5"
Perfect 1TB for $68
http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
Nice 500gig for $50. ultraslim perfect for use with a notebook
http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s    r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
*This one is the BEST portable external HD available that money can buy:
HGST Touro Mobile 1TB USB 3.0 External Hard Drive $88
http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr    _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+7 2 00+RPM
Most storage experts agree on the Hitachi 2.5"
Hitachi is the winner in hard drive reliability survey:
Hitachi manufacturers the safest and most reliable hard drives, according to the Storelab study. Of the hundreds of Hitachi hard drives received, not a single one had failed due to manufacturing or design errors. Adding the highest average lifespans and the best relationship between failures and market share, Hitachi can be regarded as the winner.

Problems with Presonus Firestudio and Logic

I am having problems with compatability with my brand new Presonus Firestudio recording interface and Logic pro 8. I am new to logic but not to home recording, and i cant understand what might be the problem. When i use the firestudio with garageband it works easily. In the garageband sound preferences there are input AND output channels that the user can define. (i.e. you can set your input channels to come from the firestudio while the output channels go to the computer speakers or headphone jacks or whatever you define it as).
From what i have seen in logic, there is only one option for your audio settings. when in preferences and under audio, there is a "device" setting in which you can define your audio device. Wheather this is input AND output for the program, i do not know. but the problem i am experiencing is that whenever i choose the firepod as the input device, no sound from logic will play from the speakers whatsoever. My first thought was that maybe ouput was going straight to the firestudio, but after plugging headphones into it this also did not work. Has anyone had success getting their firestudio to work in logic? if so let me know what settings you had to use, and how you got to moniter your input from from the firestudio via your computer.
p.s.
another WIERD problem i have run into, is that if i shut off the firestudio while logic is open, alot of times it will shut down my whole computer. i have never heard of this happening. what am i doing wrong?
thanks!

SydSeale wrote:
The new beta drivers are now here...
http://www.presonus.com/forums/showthread.php?t=3957
ah, I was hoping to find my solution here, but alas the thread is gone...
I recently bought a Macbook running Leopard, and am having difficulties with my PreSonus Firestudio Project thru Logic and Mainstage. I can get audio input and output just fine, but there's a ton of distortion/crackle. Kickstarting the sample rate seems to clear it up for a minute or two, but then the crackle comes back. The recorded tracks sound clean if I unplug the Firestudio, so apparently it's only in the monitoring stage?
On the PreSonus board, they're claiming it's Apple who needs to update drivers for Leopard; PreSonus says the "Firestudio Project is Leopard compatible."
still searching for some answers...

Any experience mixing with VRM box and Logic?

I was interested in anyone's experience using Focusrite's VRM box and Logic.

Someone mentioned the BSF2000. I have the same and it is very useful.
In the default BSF mode there is no feedback into the sliders (they don't move with existing automation), however you can send up to 117 CCs, PCs and some other kinds of data on each preset from up to 16 MIDI chanels and Logic picks them all up with no problems.
However, you can start the BCF 2000 in Logic Control mode, (for those who have BCF 2000 and haven't seen this option yet, swith off the BCF 2000, then swith on holding down the 3rd upper button– the one just below the Parameter rotary controller. When you start the display will show LC instead of bC. To return to BCF mode, restart holding the 1st upper button, the one just below the Type rotary control.) install the Logic control driver in Logic and you have feedback into the faders and rotary controls. The downside of the Logic Control mode is that is doesn't have instructions and I've spent days trying to work out what all the presets are.
Remeber too in BCF2000 mode you can not only use the controls to manage automation of ANY midi parameter, but you can also use them to replace keystroke shortcuts. eg I have one button that toggles all tracks between latch and read, another that moves through screen sets another that shows and hides global tracks etc.
Well worth every penny.
Peter
G4 Tower 1.2g GHz Dual Mac OS X (10.4.2)
G4 Tower 1.2g GHz Dual, 2GB RAM Mac OS X (10.4.4)

Dump selective with multi tables and multi querys

Hi all,
I need generate dump from selective query.
Example
TableA
TableB
TableC
I need export TableA and TableB. TableA only record with 'fieldA' > 0 and TableB only record with 'fieldB' < 0. Is it possible?
I try exp command but I have problem with query parameter.
Exp USER/[email protected]:1521/myschema
file="mydump.dmp"
log="myLog.log"
tables=TableA,TableB
query=TableA:\"WHERE fieldA > 0\" TableB:\"WHERE fieldB > 0\"
Can you help me, please?
Thanks
Luca

Hi,
i think in normal exp you can not use multiple Query, you have to do it one by one
i.e
exp scott/tiger file=exp_tabel.dmp log=exp_tabel.log tables=emp query=\"WHERE sal \>4000\" statistics=nonewhile you can do it by using the expdp something like this
expdp scott/tiger directory=DATA_DD_DIR dumpfile=exp_tabel.dmp logfile=exp_tabel.log tables=emp,dept query=emp:\"WHERE sal > 4000\", dept:\"where deptno > 20\"What version of db you are using? better to use datapump
HTH

Tascam US-2400 with Mackie C4 and Logic

Anybody using Logic with Tascam US-2400 (USB) control surface and a Mackie Control C4 plugin controller (MIDI) at the same time?
Wonder if there would be a conflict using both, but seems like a nice Logic setup if it could work.

Typically, its not about if a piece of hardware works with LPX.. It's whether or not it works with 10.8.x and if the Devs have written drivers that are compatible with 10.8.x that really matters....
In the case of Tascam, sadly, they don't have a good track record of providing support for newer OS X versions and instead just "end of life' their older products....
You will see from the following thread that the problem caused by Tascam not providing updated drivers for Mountain Lion, affects other DAWs Like PT and not just Logic...
http://duc.avid.com/showthread.php?t=342253
As for the 2400 and ML 10.8.4 itself...
At the moment, there doesn't appear to be anything new forthcoming from Tascam.... and they are not being overly helpful in regards to the non compatibility issues of the 2400 and ML 10.8.4 because as far as they are concerned they have "end of life"d that model...... Contact Tascam to register your wishes for a ML 10.8.4 driver.. Maybe if enough users do so, they might have a change of heart.. but based on their past history, I wouldn't hold my breath.
A few users have reported that they got their 2400 working under ML 10.8.2 but when asked how, none have been forthcoming with any answers.. The majorityof 2400 owners have stated its basically a 'no go' in regards to things like Fader movement etc... even using HUI compatibility mode... under Mountain Lion and have either moved on to new hardware that is fully supported under 10.8.x or have rolled back to 10.6.8 and Logic Pro 9 or whatever other DAW they use that works under Snow Leopard.
Finally, Apple made a mistake including the 2400 as a 'supported' hardware in the info for LPX and ML.... (They just copied the list over from the one they used with LP9 and Snow Leopard) They have since suggested that they will be updating the list and the 2400 will be removed from that list as Tascam are seemingly not intending to update their drivers for it any further....

Serious issues with motu interface and logic, advice?

i use a motu 828 mk2, updated to logic pro 7 from 6, everything worked fine for awhile. Sometimes I can spend hours playing and recording software instruments before the program malfunctions. All of a sudden the audio being played becomes out of tune and crackly, fading in and out. Then the screen of the motu begins flipping out, the faders become dim and move kinda erratic and sometimes theres letters that appear NIAG. If I save and close logic, turn off the interface then back on again the problem is gone. (actually sometimes it will work fine again and others it won't. Right now for example I will use logic for a minute and then it comes back again. I keep up on all the mac and logic updates. does my computer cause the problem to the interface or vice versa. Is the interface broke? Do I have the wrong driver?( I downloaded it from motu so I don't believe thats the case). does it have to do with the way all my folders are organized on the hard drive? Has anyone ever heard of anything like this? No? who else could I ask. motu's forum wasn't much help. I almost want to call the geek squad or something like that but I thought all you could give me some ideas. thank you for reading this. I really hope someone replies, even if it's to say which set up you have that works fine, maybe I'll reconsider mine.

Hey, thanks for the tip. Though, that didn't work. How frustrating, The same problem has occured. Today is the fourth day in a row that I can't use logic. In the past it would act up for a day two then work again. Tuesday ( tomorrow) I'm supposed to have a recording session, It doesn't look too hopeful that this issue will be resolved. Please , if anyone has another suggestion I would greatly appreciate it. Maybe some ideas to isolate the problem. does anyone out there use an mk2? I lost my install disk and downloaded the driver from motu's website, could their universal driver be the problem? I'm getting pretty burnt out with this b/s. Maybe resetting something in logic would help. Any ideas. thank you. I think any response could help.

Proble with tascam US122L and Logic

Logic looks like he don't see my tascam device,,,on the same computer I have no problem on that with GarageBand....Can anybody help plss..thx

Perhaps this thread will help you. I had the same problem and was able to make some tweaks to my system to get it to work.
http://discussions.apple.com/message.jspa?messageID=10244927

Issue with Axiom 25 and Logic 9/9.01

New user here of Logic 9 and now Logic 9.01. Yesterday I received the M-Audio Axiom 25. I've noticed on certain plug-in patches I'm getting static (or sounds like digital distortion) with Massive, Mtron etc...Some of the patches are fine but a number of them sound highly distorted. Anyone else experiencing this issue or has any insight as to what the problem may be? Thanks.

I would say I'm somewhat disappointed that with 171 views not one person has made any suggestions for this issue. Well I ended up resolving my own issue! Turns out that this issue was being caused by use of a sample rate of 192khz with my Motu Ultralite mk3. Once I dropped the sample rate down to 9600 all the distortion was gone. Now to be fair, I presently reverted back to OSX 10.5.7 for testing purposes, but it behaved exactly the same as it did in OSX 10.6.1. So my bet is all along the issue has been the high sample rate of 192 causing the problems with 3rd Party apps (Massive) etc.... Interesting, that I don't notice these distortion issues at 192 with the instruments/sounds in Logic 9. Oh well, I'm glad it is resolved, now on to making music!
Message was edited by: flashbak

Having trouble with condenser microphone and Logic Pro. please help

I purchased a condenser microphone that runs only with phantom power. I have an XLR cable from the mic into the phantom power interface and have an XLR to USB plugged into my computer, when i go to logic audio preferences it doesnt show that the microphone is even connected (ive checked input and output). Ive even tried it on other programs and i still get nothing. Please Help.

I have an XLR cable from the mic into the phantom power interface
What phantom interface is this, make and model.
XLR to USB plugged into my computer
What is this? Just a cable?
What microphone is it?
Trying to get an idea of your signal chain as, in your original post, your signal chain makes little sense. Do you have an audio interface or is that the phantom power interface you are referring to? A microphone isn't an interface and a mic, in itself, won't show up in Logic prefs (unless it was a USB mic, which it is not).

Distortion with USB mic and Logic Pro/Garage Band

I have read a ton of posts, but I have yet to find an answer to this question. I have a USB mic that used to work wonderfully before upgrading to Leopard. When I make a recording now, it usually works well for about 5 minutes, and then out of nowhere I get horrible distortion. I have read that if I changed the frequency from 48000Hz to 44000Hz it would correct the problem. It seemed to work, but the problem keeps coming back. If I switch the microphone profile from built-in mic back to USB Mic in Preferences>Audio, it corrects the problem for a little while. It happens in Logic, Garageband and any other program that I try to record to.
I read in a Leopard update note that one of the past few upgrades was supposed to fix this issue, but it hasn't been fixed for me. Does anybody know of any solution to this problem? I would be greatly indebted to you!

Nope. The larger buffer didn't work. What did work was running a cord out of the 1/4-inch jack from the direct box to a 1/4-to-1/8-inch adapter and then into the mic/line-in jack on my computer. I set GarageBand to use the built-in line-in and had no static problems. It's a stopgap until this gets fixed.
A post by LinuxMercedes on Oct. 3 at http://discussions.apple.com/message.jspa?messageID=8158914 may provide a solution.

Select with no conditions taking long time, too many blocks, pctused?

select * from at_journal;is taking 15 seconds, which is absurd. I have similar situations with other log tables in this system.
(selecting with rownum < 5 and with first_rows hint still takes 15 seconds)
Suspicious parameters:
PCT_FREE 1
PCT_USED 99
(Some other log tables have PCT_FREE 5, PCTUSED 90)
The tables have frequent inserts, once every day all records older than 90 days get deleted.
After computing statistics:
Blocks: 42,304 (seems absurdly high)
Size: 663 Mb
NUM_ROWS: 505,966
After copying data without compression to new table:
Blocks: 3,785
Size: 60 Mb
NUM_ROWS: 505,966
The select on the new table is instantaneous.
On a side note, in general is compression for a table with frequent deletes OK? It seems OK to me.
Storage parameters of table creation script:
PCTUSED    99
PCTFREE    1
INITRANS   1
MAXTRANS   255
STORAGE    (
            INITIAL          64K
            MINEXTENTS       1
            MAXEXTENTS       UNLIMITED
            PCTINCREASE      0
            FREELISTS        1
            FREELIST GROUPS 1
            BUFFER_POOL      DEFAULT
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
NOMONITORING;I imagine that most blocks for the table are empty. In my mind pctused of 99 means most of the block space should be full. I have read several explanations of PCTUSED/pctfree including oracle documentation and it seems pctused of 99 means the block should be 99% full.
Much thanks,
goo

goo wrote:
I imagine that most blocks for the table are empty. In my mind pctused of 99 means most of the block space should be full. I have read several explanations of PCTUSED/pctfree including oracle documentation and it seems pctused of 99 means the block should be 99% full.Hello, you don't give your database version, but if you were using Automatic Segment Space Management you would not need to worry about the PCTUSED setting, and it could be that you already are:
1 select tablespace_name, segment_space_management
2 from dba_TABLESPACES
TABLESPACE_NAME                SEGMEN
SYSTEM                         MANUAL
SYSAUX                         AUTO
UNDOTBS1                       MANUAL
TEMP                           MANUAL
USERS                          AUTO
EXAMPLE                        AUTOAnd if you are already using ASSM, then the PCTUSED is not an issue (PCTFREE still applies, but it's not an issue in your case).
goo wrote:
On a side note, in general is compression for a table with frequent deletes OK? It seems OK to me.Frequent DELETEs could be an issue because they will not reset the High Watermark, though there will not be a performance penalty because of the compression for DELETEs (the record only needs to be located for a DELETE, not decompressed). Your PCTUSED, however, is high enough so that any newly deleted record slots should be quickly reused, but... it depends on how those new records are being INSERTed. If, as Daniel says, the HWM is being effectively bypassed (Direct Path INSERTs, etc.), then the table will grow in size every day, but the volume of records effectively stays just about the same.
Have a look at how the new records are being added to that table, if it's a:
INSERT /*+ APPEND */ INTO tableA
SELECT...Then the HWM is being advanced, and the newly vacated slots from the DELETEd records are not being reused. So the table will continually grow, for roughly the same amount of data, and there'll be a proportionately longer data retrieval time.

EBS with two accounts and two seperate routing

I have 2 different Accounts with same bank with two different routing. How do I config the EBS in terms of masking and posting rules? Do I need to config two separate transactions Type?
Thanks,

Hi
You can follow the below,
1)     Create Account Symbols - Can be common for both
2)     Assign Account Symbols to G/L accounts - Can be common for both
3)     Create and define Posting rules - Can be common for both
4)     Create Transaction type and assign it to external transaction type - One transaction type.
5)     Assign Bank accounts to transaction type - One transaction type assigned to both the Bank accounts.
In case of masking, say you have bank accounts with GLs 0011911000 and 0011911001
For step 2, you can define the followin in for AP clearing account (0011911500 & 0011911501
Acct Symbol                          G/L acount
AP clearing                            00++++5+
When you are doing ENS for Bank account with GL 0011911000 , that time AP clr acc will be 0011911500.
In other case it will be 0011911501.
Summary : Define one transaction type and assign it to both the accounts. Rest all the customization can be common.
In case of more query on EBS, pls go to the following link.
http://help.sap.com/erp2005_ehp_05/helpdata/EN/43/0bd87b43de11d1896f0000e8322d00/frameset.htm
Thanks
Nikhil

Move with Repeater:hBox and filterFunction = Strange behaviour

Hello,
I fill a hBox with item from a Repeater. Now I have a Button
that moves the hBox one widht to the right (to the next items).
To prevent, that the move is going to far I do this:
[code]
if (theBox.x > (myDatalist.length*(-208)-(-832))){
myMove.end();
myMove.xBy=-832;
myMove.play();
[/code]
This works fine. Now I do a selection with a filterFunction
and move theBox back to x=0.
And from now the move is not working anymore. I've made some
of the stuff to vars to see if there is a math problem, but it is
not. I have no Idea why this does not work after the
filterfunction.

I'm experiencing the exact same issue than Corin. I don't know what's making the problem appear, but I usually need to restart to fix the problem. Also when I tried to drag something from iTunes I couldn't use the escape method as Corin mentioned before.
I already re-installed Mac OS X and after a couple of hours the problem came back again. It doesn't seem like a hardware problem because once I tried to restart my MAC and a program stopped it from doing it... and then I noticed that my mouse was fixed again.
I don't know what can be the issue, but does this mean I need to make a clean install of Mac OS X?

Odd behaviour - Select with Submit

Hi,
I have some strange behaviour to report, more as a warning than anything else. Beware of impatient users of your HTML DB application!!
Let me try and describe a strange scenario that has been occuring with our application.
The piece of interest is that we have a form that creates a record in a database table.
The user has to choose a STATUS for this record - either Implemented or Unimplemented.
This is a select list with submit so that context-specific fields can be shown depending on the status value.
e.g. if Implemented they have to enter an Actual Implementation Date
or if Unimplemented they enter a Planned Implementation Date.
Also, if its implemented, the "Implemented By" field is displayed (its a "Display as Text (saves state)" item)
This field is defined to have a default value of &APP_USER.
There is an After Submit Computation to set the field to null if the STATUS != 'IMPLEMENTED'
In the majority of cases this all works fine.
However, please follow this carefuly:
1) The user selects Unimplemented as the STATUS.
2) The user changes their mind and selects "Implemented"...BUT...before the screen can be refreshed they press the SAVE button!!
3) At this point they see an error message as they haven't filled in the Actual Implementation Date which has a validation check. However, the "Implemented By" field is now null! This means the status was still "Unimplemented" when the form was submitted, but is "Implemented" at the point of re-drawing the screen.
4) The user now enters the Actual Implementation date and hits the SAVE button. The record is created, but the value for the "Implemented By" field is null which is incorrect.
This is a warning to make sure you consider that users might try do do something like this. We ended up coding an additional After Submit Computation to explicitly set that field to the user name if the status was Implemented.
Jon.

I will try changing the SELECT with a Popup and do it as mentioned in this document:
http://www.oracle.com/technology/products/database/htmldb/howtos/how_to_create_custom_popups.html
Not sure if we can do this for a Tabular form ?

Bank Select with Famton X7 and Logic Sttudio

Similar Messages

Maybe you are looking for