Banking Loan Product Types

Hi experts;
     I need to create a taken loan from bank for my client.
After search on the forum I found that it can be done through FN1V as mentioned below in the following thread:
Akhil Poddar                    Jul 12, 2012 6:56 AM                                     (in response to SAP FICO)                             
Currently Being Moderated                
Hi,
We are using SAP Loans Management Module -- General Loans to manage the loans given / taken. We are using the following product type :-
33A General loan given
33B General loan taken
In this Loans Management module, we are able to maintain all the details with respect to start term, end term, repayment details, nominal interest, correspondence details, interest calculation methods, etc..
Transaction code for creating General Loan -- Contract is FN1V
Warm regards,
Akhil Poddar
But when I tried to create it I found that there is no such product type 33B for the General Loan Taken.
So can someone kindly advice where (t-code) and how to do that to be able to create a General Loan Taken?
Also can someone please provide me with the main t-codes in sequence to create:
1. The taken loan from bank.
2. Start date and interest will be calculated.
3. Trace loan history (report) which installments have been settled and which are not yet with their due dates.
Also, is there a difference to operate the Loan Management from SAP Banking or the Treasury and Risk Management or no?
N.B.: please pardon me where I am new in such area and it is first time to recruit the Loan Management.
Thanks in advance;
Kind regards;
Ahmad Mahmud;

Hi,
33b should be available in Customizing client. Maybe you need to get data from there to the productive client. 33B loans can then be created with FN1V.
Kind regards,
Michael

Similar Messages

  • Loans Management - Withholding Tax on Interest - Product type 33A

    Dear Experts,
    I´m trying to config the withholding tax on interest per product type 33A General Loan Given.  Do you know which is the correct flow type to use and how to config and link it  in order to set the base amount related to the interest calculated amount?
    In my design is always a quarterly calculation for Intercompany loans and, in special case, I need to apply the WHT to the calculated amount of the interest.
    Example:
    Interest invoice : Flow Type 0110 A_Interest debit pos. rec.
    01     Customer Affiliate         1000
    50     P&L Interest                 1000
    Interest invoice with 10% WHT
    01     Customer Affiliate           900
    40     WHT 10%                       10
    50     P&L Interest                 1000
    Thanks in advance for any helpful advice you could provide me.
    Best regards
    Paolo

    Hi Feng,
    are you sure it will work also for SAP Banking Loans Management? I read the attached documentation of WHT for India and every call-out is related to TRM.
    May you please confirm me which flow type of loans management is covering this sub-process?
    Thanks and regards
    Paolo

  • Interest calculation on bank loan

    Hi guru,
    we have taken long term loan from 10 banks.we have to calculate interest on loan from each bank.we have maintained each bank loan a/c as a vendor.As we know the procedure as given by sap for balance interest calculation will be followed here.is it correct or not.one more doubt is whether treating each loan a/c as a vendor is correct or not.
    Thanks
    shivaji

    Hi,
    Here you need Balance interest calculation.
    Balance interest calculation used for bank loans. It calculate GL balance only
    it will take particular period and need to configure document type SA.
    Item interest calculation used for item wise calculations like vendor wise and customer wise. It depends on payment terms and in this GL accounts Select open item management.
    I hope it is cleared.
    Thanks & Regards,
    Haribabu Bodapudi

  • Bank Loan Amortization

    Good Day,
    Please kindly provide me complete configuration guide on how to make automatic entry on amortization of bank loan including its interest expense wherein interest rate has been predetermined.
    Proforma Entries:
    Bank Loan Granted
    Dr Cash In Bank XXX
    Cr Bank Loan Payable XXX
    Monthly Amortization
    Dr Bank Loan Payable XXX
    Dr Interest Expense XXX
    Cr A/P- Vendor Account (for check issuance) XXXX
    Also, is there any standard report in SAP wherein it will show the principal amount of bank loan, amortization recorded and the remaining due amount on the loan. If no available standard report, can you also provide table wherein I can find such data so that I can request for customization.
    Appreciate the assistance you can give.
    Thanks,
    Rod

    Hi
    Please check the below mentioned configuration settings
    1.SPRO->Financial Accounting-> General Ledger Accounting->Business transactions->Bank A/C interest calculation-> Interest Calculation Global Settings-> Define Interest Calculation Types
    2.SPRO->Financial Accounting->  General Ledger Accounting ->Business transactions->Bank account interest calculations->Interest calculation global settings->Prepare account balance interest calculation
    3.SPRO->Financial Accounting-> General Ledger Accounting ->Business transactions->Bank account interest calculation->Interest calculation->define reference interest rates.
    4.SPRO->Financial Accounting-> G L Accounting->Business transactions->Bank account interest calculation->Interest calculation->Define time dependent terms.
    5.SPRO-> Financial Accounting-> G L Accounting->Business transactions->Bank A/C interest calculation->Interest calculation->Enter interest values.
    6.SPRO->Financial Accounting->G L Accounting->Business transactions->Bank A/C interest calculations->Interest posting->Prepare G L A/C balance interest calculation
    Regards
    Praveen P C

  • Securities in Cash Management (Product Type 16A)

    Hello Experts
    My client is investing in its subsidiaries and I am mapping this through the securities - product type 16A.
    The process that I am following is -
    TS01 (order)>>TS03>>TS04>>TPM28
    The problem is that I can only see the impact of the transaction in the cash management FF7B only after the TPM28 trasanction and not TS01 or TS03 0r TS04 - this is required though.
    I have done the configuration under -
    Financial Supply Chain Management>>Treasury and Risk Management>>Transaction Manager>>General Settings>>Link to Cash Management>>Assign Planning Levels/Specify Update Types for Cash Management (SE1000 update type has been made relevant to CM)
    Have also checked the config point Define Company Code-Dependent Settings for the Product Type (under securities node)
    Please let me know if this is possible.
    Regards
    Sandeep

    Hi
    Have been able to solves some bit of the problem (the FD orders are appearing in the cash forecase). However I am not clear about the interest due - will it appear anywhere in the forecast (or can ths system be configured to reflect the same in the liquidity forecast).
    Similarly the bonds issued will have the payments due on account of interest (can this be brought under Liquidity)
    I am using the BNK key should I use the PSK key for such items.
    Aalso I was reading in the SAP training materila that the planning group can be specified in the BP master (verbatim below) but i could not fing out where in the BO master it may be.
    The update to Cash Management distinguishes between two cases:
    u2022 Option 1 (liquidity forecast):
    If no payment details have been maintained in the transactions, that is, the
    bank accounts are not known, the cash flow for a bank account or bank
    clearing account cannot be displayed. To ensure that the cash flow appears
    in Cash Management, the amount for subledger accounts is displayed. The
    system then draws on the planning group specified in the master record for
    the business partner.
    u2022 Option 2 (cash position):
    If payment details are specified in the transaction, that is, the bank accounts
    are known, the cash flow appears in CM on the level assigned to the relevant
    bank bank (clearing) account.
    Thanks for your time and valuable input.
    Best Compliments
    Sandeep

  • To display the Product Type 51D

    Hi friends
    I working on Banking Details report.... I want to retreive the transactions(VTBFHA-RFHA) related to 51D product type(VTBFHA-SGSART)  also ...
    following is the code given by them ... which are not satisfying to retreive 51D. So please suggest  me in coding....
    SELECT A~RFHA
             A~SGSART
             A~KONTRH
             A~ZUOND
             B~SFGZUSTT
             B~DELFZ
             C~SFHAZBA
             C~BZBETR
             C~ATAGE
             C~PKOND
             C~RFHAZU
             D~REFTYP
             D~REFNR
             D~OBJNR
             B~DBLFZ
        INTO TABLE T_MOVE FROM VTBFHA AS A
        INNER JOIN VTBFHAZU AS B ON BBUKRS  = ABUKRS AND
                                    BRFHA   = ARFHA  AND
                                    BSAKTIV = ASAKTIV
        INNER JOIN VTBFHAPO AS C ON CBUKRS  = BBUKRS AND
                                    CRFHA   = BRFHA  AND
                                    CRFHAZU = BRFHAZU
        INNER JOIN REFON    AS D ON DOBJNR  = AOBJNR
        WHERE A~BUKRS    = P_BUKRS AND
             A~RFHA    IN S_MOVE AND
             ( B~SFGZUSTT = 20    OR
               B~SFGZUSTT = 10 )  AND
              B~SAKTIV  <> 3       AND
             B~DBLFZ   LT S_DELFZ-LOW AND      "term end
              B~DBLFZ   IN DELFZ2 AND "S_DELFZ AND
              C~SFHAZBA EQ '1200'  AND
              D~REFTYP  EQ 'REF'.
    Please reply early.. Today is the last day submit.....
    Thank You...

    hi
    pass those fields in the where clause according to ur requirement. i dont see seleciton based on RFHA and SGSART.
    regards,
    madhumitha

  • Syndicated Facility - Product type 56B

    Hi,
    I have created different lines of credit like:
    1. Short term loan
    2. Medium term loan
    3. Bill discounting
    4. Letters of Credit etc. using T-code TCL1
    I then create a Syndicated facility transaction (Product type 56B transaction type 200) using FTR_CREATE and under the Profile TAB created separate limits for each of the above lines of credit. All of them are treated as 'Sub line of credit' under 'Prime Line of Credit'.
    Then I create a Short term loan draw (withdrawal) using Interest rate instrument (Product type 55A) and try to attach to the Facility I created earlier. When I attach it, I get only one option 'Prime line of credit'. I am not able to attach each draw to a separate sub-line of credit like Short term loan, Medium term loan etc.
    So because of this, in report TM_60, I can see only the Prime line of credit and utilization under that. I am not able to see the sub-line of credit and utilization under each of them.
    Please advise, what I am doing wrong.
    Thanks
    Kalyan.

    Hi Manish,
    I have added the Short term loan, Medium term loan as 'sub-line' of the Prime credit line by clicking on the 'Other lines' in the 'Strucuture TAB' while creating the facility. But when I am assigning this facility to the Draw (Short term loan) in the Administration TAB it shows only the 'Prime Line of credit' as a option under 'Credit line' It does not show the sub-lines like short term loan, medium term loan etc.
    I appreciate your input.
    Kalyan

  • Payoff Product Type 55A interest rate instrument structure

    Hello,
    I´m using product type 55A Interest Rate Instrument and I have two questions:
    1. Could you confirm me if is possible register a capital payoff no planning in this kind of product type? Which transaction could I used?
    2.Is possible to used a partial disbursement? For example,
    I get a loan for 3,000.00, at the beginning  the first day I disbursement only 1,000.00 and  2 months later I disbursement 2,000.00. Then the loan calculate at the begining interest in base of  the 1,000.00 and  2 months later calculate interest in base of 3,000.00.
    Please help me.
    Thanks
    Best regards,
    Adriana Rivera

    Hello.
    2.Is possible to used a partial disbursement? For example,
    I get a loan for 3,000.00, at the beginning  the first day I disbursement only 1,000.00 and  2 months later I disbursement 2,000.00. Then the loan calculate at the begining interest in base of  the 1,000.00 and  2 months later calculate interest in base of 3,000.00.
    1. You can use product type 56A as credit line and product type 55A as disbursment. You can link two product types with "Facility" field on "Administration" tab. Negative side of this method: you have several transactions. Interests are calculated for each 55A prod. type.
    2. You can use product type 55A alone and "Other changes in capital structure" button. You can take several amount of money at any time. Negative side of this method - you are not able to show these 3,000.00 on "Structure" tab. But you can use "User exit X" tab where you can create field for this purpose. Positive side - interests are calculated as you wanted in your post above!!!

  • Product type

    Hi Experts,
    I need to create a insurance product.Under which product type i can create
    serivce or finance.
    Regards
    Ashwin

    Hi, i know of cases where product type "FS financial service" has been successfully used for cases like leasing and loans.
    Which product to use will depend on how u r going to use the product for billing and pricing. CRM gives u flexibility to define ur own tabs and fields using set-types and attributes. So, u can use "service product" also.

  • SRM 4.0- How to set the default values for product type (01) only for SC

    The radio button “Service” should not be visible.
    Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
    How to set the default values for product type (01) only for SC
    We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
    Here we can set defalut value 01 but it is not correct one since same search help is using several places.
    We need to limit the search help results only for SC.
    Kindly help out me ASAP.

    The easiest way to set defautl values is to edit the batch class.
    Goto the characteiristic and go to update values.
    In here you probably have something like 0 - 100 as a spec range.
    On the next line enter the default value within this range.  At the end of the line, click in the box in the column labelled "D".  This indicates the defautl value for the characteristic.
    If you need to you can do this in the material classification view as well.
    Just to be clear, these values will only show up in the batch record.  You can not have defautl values in resutls recording screens.
    FF

  • Change description of Product Type Dropdown in SRM 7.0

    Hello,
    We are upgrading to SRM 7.0 and have a requirement where we need to rename the decription of Product type (dropdown) "Materials" to "Goods" on the "Describe Requirement " screen.
    We tried modifying the value table COMC_PR_TYPE_T which stores these values however the change did not reflect on the Web dynpro side.  This seems to be like a buffering issue however we are not sure.
    Does anybody have any idea why system is behaving this way? or is there any other way of doing it?
    Thanks

    HI,
    Did you solve the problem? Iu2019m facing with the same issue. Iu2019ve thought also that maybe the AS or the portal buffers the dropdown values, but now Iu2019m not sure about this. Please help, if you know the answer.
    Thanks,
    Roland

  • Transfer material type DIEN in ECC system to CRM product type Service

    Hi Experts,
    I have a requirement to transfer material type DIEN in ECC system to CRM product type Service.
    How can we do this?

    Hi Viswanath,
       I dont think its possible to replicate material type DIEN from ECC to CRM Service Product.
       Service Products need to created in CRM, from here transfer to ERP. To transfer service product from CRM to ECC, you need to enable upload for Service Product in SPRO.
           Customer Relationship Management -->
                 Master Data -->
                        Products -->
                            Settings for Product Type -->
                                    Allow Upload for a Product Type.
       Now here select the check box for product type 02(service).
      To send product from CRM to ECC, open the product you need to send it to ECC in COMMPR01.
             Go To -> Transfer to ERP. Here give the ECCRFC Destination and mapping material type.
    //Bhanu

  • Defining New product type in CRM 5.0

    Hi Guys,
    Can anyone tell me how to define new Product Type for CRM(Standalone Products) like material, Service, warranty, financing .
    Thanks in advance
    amar

    Hi Kovela,
    I haven't come across any IMG activity which allows to create a new product type in CRM. Why do you want to have a separate product type. It is not so easy to create a product type because you also need to create additional attributes and set types. In general all existing product types are stored to table COMC_PR_TYPE. Also you need to maintain a separate structure (COMT_PROD_MAT_MAINTAIN_API) for each product type.
    Why don;t you enhance the existing product type by creating new attributes and set types as per your requirement.
    <b>Do not forget to reward if it helps,
    </b>
    Regards,
    Paul Kondaveeti

  • DISALLOW PRODUCT TYPE SERVICES

    We have implemented SRM5.0 Extended Classic Scenario and only want to allow procurement of product type "material".
    How do I remove Product type "services" from the Shopping cart and purchase order create screen in order to only have product type "material" as a selectable option?

    Hi,
      Which screen do you want to change the radio button?While creating the SC,you can modify the Product search screen so as not to display the Services else to change the radio button display you may have to modify the screen templates.
    BR,
    Disha.
    Pls reward points for useful answers.

  • Set type COMM_PR_UNIT is not allowed for product type

    Hello all, I am working in SRM 7.0 and when I try to replicate service master (DNL_CUST_SRVMAS) I have this error:
    Set type COMM_PR_UNIT is not allowed for product type
    What can I do? I think that is an ABAP problem
    Thanks in advance
    Rosa Rodríguez

    Rosa,
    This note is something different and nothing to do with the issue. Can you share how did you resolve the DNL_CUST_SRVMAS issue? We are also getting same error.
    Thanks,
    Jagadish

Maybe you are looking for