Banner alert problem

I'm having an issue with banner-style notifications in iOS 8 on both iPad and iPhone. Sometimes, not always, when I receive a banner notification it doesn't "stick", meaning it appears then disappears in the blink of an eye - not long enough to read it. It drops down then goes away IMMEDIATELY. Anyone know what the problem is? I've had this problem off and on ever since iOS 8 was released thinking it would eventually be fixed.

That didn't help, but here is another piece of the puzzle. I went into the offending alerts (the ones that don't "stick" for a while when they come in) and noticed that there are TWO alerts set for the same time, when actually I only set up ONE alert originally. Not sure why my alerts are doubling up? They seem to be canceling each other out because they "alert" at the same time.

Similar Messages

Passbook causing iphone to restart each time I slide to view banner alert

Trying to figure out if it's the application that is causing the crash or new 5S or both.
Downloaded AMEX app and added a pass book scan through the app for one of my cards. Every time I use it the pass book displays a banner alert and it says " Slide to view details" EVERY single time I slide my phone displays the apple logo and automatically returns to lock screen without the banner alert like it restarted really quick.

Hi Rackham12!
I have a couple of troubleshooting suggestions for you regarding this issue. First, simply attempt to reset your phone according to the instructions in this link:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
If you are still experiencing the issue after attempting the troubleshooting step above, you may need to make a backup of your iOS device and restore it according to the steps in this article:
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Take care, and thanks for visiting the Apple Support Communities.
-Braden

How can I get my sound notifications to work? They used to but have stopped. I get the banner alerts. I have checked in Settings - Sound and the volume is at max. Help please.

For some reason the sound notifications on my iPad mini have stopped. I still get banner alerts but that is it. I have checked Settings - Sounds and the ringer and alerts setting is at max. I have updated the IOS system. Not sure what else to do.

Unlock can be done only by original Carrier. You should get
this straightened out before leaving Canada. Warranty on your
iPhone is not international - if you need any repair or replacement,
you will have to return iPhone to Canada for this to be done.

Text Alert problem

Since upgrading to IOS 6 last night I only intermittently get alert when a text comes in. Does anyone have similar problem or fix. Also what is 'Lock Sounds' in settings/sounds?

there is nothing you can do to go back to ios 5.1.1....thats why i went and bought another 4s with the old software....we dont know how long this sound alert problem is going to continue...it could be months before they come out with a new update fix....believe me, i spent 4 hours on the phone with apple support and we could not find a fix for this problem......i guess as more and more people call in they will realize that this is a real problem and not just random.....also they have employess who do nothing other than read these forums, so the more people who write about this issue they will recognize there is a problem with the message sound alert....
<Edited By Host>

Banner alert stopping launching apps from home screen

Whenever a banner alert appears from my home screen, it prevents me from going to open a different app. This is happened when using WhatsApp so I don't know if it's a third-party issue.
For example the banner alert is from WhatsApp, but I can't tap on the app itself, I have to tap on the banner alert. I try tapping on different apps and it won't let me.

You should tap on the banner and it will open the app. If you wait a moment, the banner will disappear, unless you have it set to Alert, which will require you to tap on the alert before you can do anything else. You might want to take a look at the User Guide, http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf or this support document. iOS: Understanding notifications

Chart alert problem in BO 4.0

Dear Experts
We previously used BO XI 3.1 Edge series, Service pack 2. In this server we have develop some of the reports use alerts in line chart (Vertical Mixed Chart).
Now we migrate our server to BO 4.0 Service Pack 2. After migration complete we have seen that alerts of the chart is not working. and also we can not use alert in any chart in a new report.
Would anyone please help us to solve this problem.
Thanks in advance.
Md. Nahiduzzaman

Hi H
thanks for answering my question. Would you please help me a little more....
Currently i used patch 2.10 and product version of my BO is 14.0.0 and Build No is 565.
Is patch 2.12 is available and from where i can got it? i have checked it in "http://service.sap.com/support" and not find it..
Thanks
Md. Nahiduzzaman

Facebook and Mail both send banner alerts in notification center for every action on facebook

So I added Facebook to my accounts in Settings. Then I logged in to Facebook and modified my notification settings so that I would get the notifications I wanted. Awesome. Works great. Problem is, these notification settings in Facebook are tied directly to your email on file with facebook -- there's no way (at least that I saw) that allows you to disable getting email from FB, but allow OS X to pull in those same notification settings.
So now in Notification Center, everytime someone interacts with my Facebook, I get an alert from Facebook and an alert from Mac Mail that Facebook was alerting me. Super redundant.
Anyone find a way around the duplications?

I'm also having this problem.
Notifications receives alerts from Reminders app, but not Mail.
I've set preferences in Mail for 'Inbox Only' and 'All Mailboxes', sent test mail from ISP webmail and Google (Mail is not setup to receive from this account) - still no notifications.
I had previously used Growl (v1.4) and GrowlMail very successfully (with 10.7), but while upgrading to Mountain Lion I was informed that GrowlMail was incompatible so I deleted it.
While testing this problem of not receiving Mail Notifications I have disabled Growl and rebooted.
Like others here:
Checked: Notifications setup
Checked: Mail setup
Rebuilt permissions
Rebooted
Any help would be very gratefully received.
Many thanks.

Javascript alert problem - select state

I am trying to validate my form with javascript. I'm having
trouble with my state field. If the user selects a state javascript
alerts the following message: "SELECT ONE is not a valid choice.
Please choose your state." I want the alert message to pop up if
select one is selected as a state. How do I fix this problem?

pqer wrote:
> I am trying to validate my form with javascript. I'm
having trouble with my
> state field. If the user selects a state javascript
alerts the following
> message: "SELECT ONE is not a valid choice. Please
choose your state." I want
> the alert message to pop up if select one is selected as
a state. How do I fix
> this problem?
>
>
>
> <script language="javascript"
type="text/javascript">
>
> // check to see if the form is blank
> function validForm(contactUs) {
>
>
> if(contactUs.state.value != "SELECT ONE") {
> alert("SELECT ONE is not a valid choice. Please choose
your state.")
> contactUs.state.focus()
> return false
> }
if(!contactUs.state.selectedIndex) {
alert("SELECT ONE is not a valid choice. Please choose your
state.");
contactUs.state.focus();
return false;
Mick
>
> </script>
>

Alert problem after iOS 7

After upgrading to iOS 7 I have been having random alert sounds on my phone. When I check my phone after the alert I have nothing new. Also the sound that I here is not one that I have picked for alerts, email or text. I can't understand where this sound is coming from.
Any ideals?

I have the exact same problem. Since the upgrade around the same time each day an alert would go off that I'm not familiar with and nothing shown on screen. It sounds like a crackle and vibrates at the same time. Anyway I changed my phone a few days ago as I damaged the screen and this new phone is doing the same thing and I can't figure out what it could be

XI Mail Alerts - problem

Hi all!
I created XI Alerts, which send e-mail when error occurs. Everything working fine but i have one problem.
I created scenario - ERP to File. For my tests I change target directory (to not existing on server) in File Receiver communication channel configuration. I get error email from XI server, and this is OK. But I get this e-mail every 5 minuts over and over until I fix up communication channel. When I fix channel up, everything is OK (mail is not send). I want to get only one e-mail message when error occurs.
Plesae tell me where I can configure that. Thanks

Normally
That can be achieved by configuring different "Alert Configuration".
But am not sure whether if "Alert Configuration 1" is given "Supress" Checked on"
Wonot allow other "Alert Configuration 2 & 3".
What u get if u create seperate "Alert Config" and check that option.
i suspect u will not get other messages whether if that is from different Message id. Unless u r first message is read.
This functionlity of RWB seems to be set back.
Any views
lemme me know miko what is u r output.
rdgs
srini

Alert Problem. Pls advice

Hi Aall,
I have made one alert Category.
Initially Wwhen I do not check -- Suppress Multiple Alerts of This Rule every time I was getting alert.
But as I want one alert I check that box I am not getting any alert.
Pls advice urgent
Regards

hi
here give you some blogs and Docs about alerts
apply the better for you
XI: Alerts - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
http://help.sap.com/saphelp_nw04s/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
Triggering by Calling a Function Module Directly.
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Alerts with variables from the messages payload (XI) UPDATED
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Simple Steps to Get Descriptive Alerts from BPM in XI
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Triggering XI Alerts from a User Defined Function
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Throwing Smart Exceptions in XI Graphical Mapping
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
/people/sukumar.natarajan/blog/2007/01/07/how-to-raise-alerts-from-abap-proxy
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/sravya.talanki2/blog/2006/11/22/error-handling-framework-xiout-of-the-box-episode-1
/people/ginger.gatling/blog/2005/06/16/integrating-alerts-into-uwl--its-no-problem
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.ht
http://help.sap.com/saphelp_nw04/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
check this links.
https://www.sdn.sap.com/irj/sdn/forums
Trouble shooting Alert configuration:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Alert Inbox
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Defining Alert Classifications
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Triggering Alerts
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Setting up alerts
Setting up alerts in RZ20
Alert Management
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e04141e8-0f11-2a10-adaa-9d97b062c2df
Alert Notification
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f449a8-a6db-2910-a386-d2b5999f5751
Thanks
Rodrigo

Banner Ad problem in flash

Hi All
I would like help with an error happen when I want to modifiy
a banner ad made in flash mx 2004. He wsnt keep the same fonts and
special effect. See below the two links.
Here is my original banner ad in
FLASH MX 2004 I would like the same result but with the new text
and city image with the same effect
Here is the problem
with the same banner ad when I want to translate the text and
change the image of the city with FLASH 8
Somebody can help me please?
Nick :beer

I am somewhat a noob, so please have patience with me if my
solution is way off. But, with the new model, are you setting your
text to "...device font" in the properties panel? I have had
similar look issues that this method seems to fix (I have no idea
why, but it does).
Good luck.
r

WLSE Mail Alert Problem

Hi
we get alerts when there are rouge aps or ad hoc neterks. Problem is when the ssid is not broadcasted, in the wlse there is just /x/X os something like that instead of a ssid.
when i get an email from the wlse and the ssid is seen then its correct:
Subject: 020cf1f918b6[020cf1f918b6] P2 notification. FaultId : 145.
Unknown Station IBSSNetwork is: IBSSDetected. Ad-hoc network creation
detected: CMS
FaultId: 145
DeviceId: 3210
DeviceIP: 020cf1f918b6
DeviceName: 020cf1f918b6
MO: Unknown Station
Change: Ad-hoc network creation detected: CMS
ChangeSeverity: P2
StateChange: IBSSNetwork is IBSSDetected
AlarmState: Active
OverallSeverity: P2
DeviceType: L2Device
but when the ssid is not broadcasted:
Subject: 020cf1e8e5a8[020cf1e8e5a8] P2 notification. FaultId : 135.
Unknown Station IBSSNetwork is: IBSSDetected. Ad-hoc network creation
detected:
Mime-Version: 1.0
Content-Type: multipart/mixed;
boundary="29647319.1129639614015.JavaMail.casuser@wlse"
--29647319.1129639614015.JavaMail.casuser@wlse
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
FaultId: 135
DeviceId: 3067
DeviceIP: 020cf1e8e5a8
DeviceName: 020cf1e8e5a8
MO: Unknown Station
Change: Ad-hoc network creation detected:
ChangeSeverity: P2
StateChange: IBSSNetwork is IBSSDetected
AlarmState: Active
OverallSeverity: P2
DeviceType: L2Device
EstimatedLocation: Location could not be determined. Device was reported by client stations only.
--29647319.1129639614015.JavaMail.casuser@wlse--
so the mail get junked. is there a workaround that the email looks correct?
regards

I am not sure what Version of WLSE you are running, but I would recommend updating to 2.12.

Alert Problem

Hi experts,
I am doing idoc to file scenario, its working fine. I have done alert configuration for this scenario. Alert is triggering only for mapping error. but in receiver determination i placed filter for particular field in idoc. For some field values i dont want to send data to target. so this will lead to error receiver not found. when ever this error occurs alert has to be trigger. But the alert is not triggering. What would be the problem ?
Please help me out its very urget.
Regards
Venky

Hi Venkatesh,
Make sure your Alert Rule is active and also the configuration us done properly. You can go through this blog and check your alert configuration step by step. It might help you.
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
Thanks and Regards,
Sanjeev.
Reward points if helpful.

ALERT PROBLEM WITH QUERY OUTPUT

I have a few queries that were originally created using the B1 Query Wizard, that I then attached to Alerts. Unfortunately when the Alert runs, the query output is different either in layout or records returned (usually less) when compared to running the query directly. Is this a glitch in B1 as some folks have told me or is there a problem with queries created by the Query Wizard?

Hi Frank,
This is a limitation.
The note 874145 is written about it. It also offers some workarounds.
I would think that you can also create a 'Select count(*)' query that would also run as an alert that would tell the user how many records are affected. I did not test this, just an idea.
Hope it helps,
Jesper

Banner alert problem

Similar Messages

Maybe you are looking for