Banner for pix

what is the command for creating a banner in 6.2
6.3 I know, but I cannot find 6.2
thanks

Hi
Unfortunately there isn't one. Support for banners was introduced in version 6.3 of the pix software.
HTH
Jon

Similar Messages

  • Bug: Customizing Convergence banner for a specific domain does not work

    Hi,
    I'm trying to customize the banner for a specific domain, I was following the steps from the documentation but I found that there is a bug relate: Bug #6749263 And I tried to find if the bug was already resolved in convergence 1.0-7.01 and the search in bugs.sun.com gets nothing.
    Does anybody knows if the bug was fixed in convergence 1.0-7.01?
    Thanks in advanced.

    ofonseca wrote:
    I'm trying to customize the banner for a specific domain, I was following the steps from the documentation but I found that there is a bug relate: Bug #6749263 And I tried to find if the bug was already resolved in convergence 1.0-7.01 and the search in bugs.sun.com gets nothing.The bug hasn't been fixed (according to the bug notes).
    Regards,
    Shane.

  • Create banner for blog

    how can I create a banner for my blog. specifically how can I copy the text box and save it as an image?

    Probably the simplest way other than copy and paste (which may or my not work) is to take a screenshot of the text.
    With the text box visible, CMD-SHIFT-4 - that will turn your mouse pointer into cross-hairs > click (and hold) at the upper left corner of the text and drag to the lower right corner of the text box > release the mouse button. a PNG file will be created entitled "Screenshot XXX.PNG" where XXX is the timestamp. Use this image on your banner.

  • Flash banner for site.. How to...

    Hi everybody,
    I would like to create flash banner for my site. Where can I find eBooks how to do this and which program is the best one for it?
    Thx in advance for help.

    I found a good flash banner maker site, what I use and can reccomend... its very easy to use, only 3 steps- Check it out:
    http://www.banner4five.com 
    Have a nice day! Hope I could help...

  • CiscoView 5.4 Support for PIX 515

    I have just installed CiscoWorks2000 and am having trouble opening CiscoView for my PIX-515. I read in the documentation that it is supported, (I think). Anyway I receive an error which states:
    CiscoView Error
    Can't Find Applicable device package for "device name".
    Thanks,
    Sabin

    Currently the latest CV 5.3/5.4 device package v3-0 for PIX only supports PIX 501, 506 and 506E models. PIX 515 support is not yet available in CV: http://www.cisco.com/cgi-bin/Software/CiscoView/cvplanner.cgi

  • Aaa authorization commands for pix 535

    Hi ,
    Can you provide aaa authorization commands for pix 535
    Sanjay Nalawade.

    Hi,
    Please find the AAA config for PIX.
    aaa-server TACACS+ protocol tacacs+
    max-failed-attempts 5
    aaa-server TACACS+ (ExranetFW-In) host
    timeout 5
    key ********
    aaa authentication enable console TACACS+ LOCAL
    aaa authentication serial console TACACS+ LOCAL
    aaa authentication http console TACACS+ LOCAL
    aaa authentication ssh console TACACS+ LOCAL
    aaa authorization command LOCAL
    aaa accounting command privilege 15 TACACS+
    aaa authorization exec authentication-server
    Karuppuchamy

  • NIC can be used for PIX

    Hi all!
    Just want to inquire what brand of NIC that can be use for PIX. I have PIX firewall with only two interface(inside,outside). I want to add one more card. Do I need to buy that card from cisco or can I use the ordinary NIC's?
    Tnx a lot!!!

    hi,
    I found this in wikipidea. PIX-1FE - 32 bit/33 MHz One port 10/100 Fast Ethernet card. Based on the Intel Pro/100+ family with the 82557, 82558 and 82559 chipsets.
    Can i also use this one?
    Tnx!

  • Create a pullup banner for show - beginner

    Hi there,
    I would like to create a pull up banner for my company to bring at exhibitions, shows etc and I would like to use InDesign as I feel more comfortable with this software. Do you have any advises? How big the font should be? Any good tutorials? I checked on YouTube and it was pretty useless.
    Thanks a lot
    A -

    Most printers have different sizes for their pull up banners which results in different dimensions.
    Some will want it designed at full scale. Some will want you to work at 1/4 scale and so on.
    You should also enquire about the resolution your images should be at for good reproduction.

  • I used my key note to create a banner for the web. When I play it on my iphone or ipad the control panel shows and I have to operate it manually.Is tere anything to fix this problem?

    I have used keynote to create a banner with transitions.
    It plays OK on the web but doesn't play on the iphone or Ipad, unless i hit the control panel.
    I configured it for loop and self playing and that works fine in Chrome and Safari with no control panel visible.
    What can I do to resolve the problem and get it to work on iphone and ipad?

    This is the Mac discussion, I believe you need the iOS Discussion.

  • Creating a banner for "Featured Podcast"

    Hi everyone,
    My podcast "This Week in League" just got one of the featured slots on the Australian/NZ iTunes store (massive thrill!). For example, when you open the iTunes Store and click "Podcasts", it's one of those big banners that cycle through on the Podcast Homepage.
    My question is this: should I have been contacted about creating and supplying a banner? The other 3 or 4 shows that are in the featured rotation all have banners that appear to have been optimised for the size of that main panel, but ours looks as if an Apple staff member has gone to our website and grabbed the header logo off there and put it in there.
    I'd love to supply a proper banner optimised for the space that looks a lot better if I could, but I'm not sure of the channels I'd go through to do so. Can anyone point me in the right direction?
    Cheers,
    Nathan

    Congratulations on being featured: it's an achievement, given the competition, and few people manage it. I'm afraid I don't know anything about how it works; you would have to contact iTunes Support. They are notoriously unhelpful, so I don't know whether you will actually get anywhere. Go to http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'. You will see a link to either 'Express Lane', which will guide you eventually to some contact options, or you may see a link to email them.

  • Manual for PIX 506E?

    Hi everyone! I just became in charge of a PIX 506E, which I have no experience with. I was not told how it was set up, what the password is, etc...Oh, and the dongle for the console connection is non-existent as well.
    On Cisco's website, I can't find any manuals for it. The only documentation I could find was a quick setup guide, which is not helpful at all if it is already set up.
    Basically, I am looking for any help anyone can provide so that I can get into the interface for the PIX 506E so I can see how things are set up and to change things in the future. Thank you in advance!

    This could be a long journey or a short one, but for sake to help you here we go..
    When I say long journey it is because all depends on what type of resources you have at hand, at least you have us in netpro, but more specifically if you do not know the admin password for the PIX that is number one headache, you need password recovery procedure, please try to make an effort to obtain the password to not go through all these procedures, if you cannot then you need password recovery .
    See password recovery.
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_password_recovery09186a008009478b.shtml
    Please have handy these tools
    1- Console cable to connect to COM port in PC and PIX console port
    2- Terminal emulator - hyperterminal
    3- Mini hub to connect your PC and pix pysical interface to it
    4- tftp server software running on your PC
    Follow instructions on link.
    As for instructions about the PIX there are hundreds of documentation in Cisco website, we can direct you to them but first you need to gain access to PIX.
    HTH
    -Jorge

  • RSA SecurID for pix/ios console authentication?

    Hi
    Does anyone know how I can setup my routers and pix firewalls to use RSA SecurID for authentication of console login requests (telnet, ssh, serial)? I'm currently using RADIUS (both IAS and CSACS 4.0, some devices are on IAS, others CSACS) for authentication, but I'd like to utilize our SecurID system. Can anyone point me in the right direction? Thanks
    Jason

    Following link can help you configure RSA with ACS:
    http://rsasecurity.agora.com/rsasecured/guides/imp_pdfs/Cisco_ACS_401_AuthMan61.pdf
    Following link can help you configure IAS with RSA:
    http://rsasecurity.agora.com/rsasecured/guides/imp_pdfs/Microsoft_IAS2003_AuthMan61.pdf
    ~Rohit

  • Banner for WebDynpro application

    Hi,
    How to include banner as header for my WebDynpro application?
    Thanks
    Siva

    Hi,
    I want to place an image as banner to my WebDynpro application.
    Currently I have placed the image in header of group element.
    When I view the screen in the browser, I am getting space between image and top of the screen.
    I want to show the image at top of my screen.
    Could you please suggest any solution for this/
    Thanks
    Siva

  • Is there any alternative to console cable for pix 501 firewall?

    I need help on CISCO PIX 501 Firewall, it comes with console cable having serial port, but systems now a days & the one i am having are not having serial port so i am not able to access command-in-line , is there any alternative way, can it be accessed using ethernet or lan wire, if so please provide steps, waiting for your valueable responses, ...

    Hi,
    Have you considered getting an USB adapter for the Console cable?
    I had to get that for my first work laptop since they happened to order a model without the serial port. For the most part it worked just fine.
    I guess depending on your PIX configurations you might be able to boot it up and attach a PC directly to it and manage it.
    - Jouni

  • TACACS config for PIX & ASA

    I am struggling in configuring the TACACS configure to allow authentication via Cisco ACS, I could able to configure for switches 2950,3750 but not with ASA & PIX, can any let me know the configs?

    I am actually looking for a similar command which I used on the Cisco 2950/3750
    aaa new-model
    aaa authentication login default group tacacs+ enable local
    aaa authentication enable default group tacacs+ enable
    aaa authorization exec default group tacacs+ if-authenticated
    aaa authorization commands 1 default group tacacs+ if-authenticated
    aaa authorization commands 15 default group tacacs+ if-authenticated
    aaa accounting exec default start-stop group tacacs+
    aaa accounting commands 1 default start-stop group tacacs+
    aaa accounting commands 15 default start-stop group tacacs+
    with this commands I could able to track the command what all the user has used, logs with the user name which I configured on TACACS, the command which you have sent me I could able to login with the TACACS user name "aaa-server TACACS+ host " but it is not accounting all the details like login & logout time, command what the user has issued etc..

Maybe you are looking for