BAPI_ALM_ORDER_MAINTAIN - Without operation. Is it possible ??

Hello ,
I'm creating an order via bapi BAPI_ALM_ORDER_MAINTAIN with 1 operation.
It run perfectly.
Now I need to create the order without operation.
On the program, if I delete the parts to create the operation, the bapi return an error:
so my question is:
do you know some parameter to pass at bapi to create the order without operation ??
is it possible ?
thank you.
R

Hello,
the error is:
1 E IWO_BAPI 162 162 Order &1 cannot be put in process, as no operation is maintained
the merhod table id:

Similar Messages

Bought a refurbished Macbook without operating system. Trying to get an OS installed but all I get is a white screen?? HELP!

I purchased a refurbished Macbook pro without operating system.
This is my first Mac, but have heard they are very simple and much more intuitive than Windows,
I've had the machine for three weeks now, and it's been nothing more than a paperweight!!
A friend said he had his old install disks, which happened to be exactly what google said I needed to start out as: version 10.5
When I boot holding the OPTION button down, I get two options. Windows (with an up arrow below it) and Mac OS x Install Disk 1 (with an up arrow below it).
I can move the mouse, and move the cursor with my arrow keys, to select either Windows or Mac OS install. The problem is - if I select the Mac OS install,
the disk starts up (I can hear it), but it never does anything. I can no longer move the mouse / cursor after selecting it. It will stay for hours like this with no progress.
On the disk itself, it says MAC OS version 10.5. This software is part of a hardware bundle purchase - not be sold separately.
It also says: to start up from Mac OS x, hold down the C key as the computer starts up. When I do that, all I get is a gray screen.
I've also tried the shift key when starting up (supposed to be safe mode?) but same thing - gray screen.
The only way to even eject the disk (scared the heck out of me) is to start up holding the OPTION button.
If I select WINDOWS after using the OPTION button, I get an IBM message:
IBM Secure Data Disposal Utility 2.0
IBM Remote Deployment Manager 4.1
Date and time of execution...7/24/12 18:01:22
Command executed................A:\SCRUB3.EXE /d=all /l=2
Return code...............................0
I assume this is what they used to wipe the hard drive before sending...
Obviously I am Apple-illiterate, but I've spent days going through chat rooms, etc. and came up with nothing.
At this point, I suspect either:
1) The machine is junk and needs to be returned OR
2) The disks are bad and/or can't be used for a clean install
I don't want to waste money buying a brand new OS, only to find out that the machine is bad.
Any thoughts??

That model originally shipped with a special Intel version of Tiger. You should be able to install any retail version of Leopard or later. I would recommend you start with Snow Leopard. Snow Leopard requires a minimum of 1 GB of RAM. If you have 2 GBs of RAM then you could install Lion or Mountain Lion.
You can purchase Snow Leopard from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
When you receive the DVD:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. When completed quit DU and return to the installer. Complete the Snow Leopard installation.

Synchronous Call without Operations Mapping

Hi All,
We have requirement to call a web service from WebDynpro hosted on BW system via PI. For this wanted to use AAE (advanced adapter engine) with SOAP to SOAP adapters. We are thinking of implementing this interface without message mapping hence no operation mapping.
There are two reasons for this, 1. To increase the speed for the call 2. In PI there is nothing to transform, just to proxy it thru
Now here my question are,
Is our approach correct?
Can we implement synchronous calls without operation mapping?
Here we are using integrated configuration for this interface.
If this approach is wrong, please suggest me a better way to proxy-ing PI for given requirement.
Thanks in advance.
Regards,
Prasad.
Edited by: PrasadBabu Koribilli on Mar 30, 2011 9:46 AM

Hello Stefan,
Thank you for the reply.
I proposed the same to the project. But as per the guidelines any connection to backend SAP system should go through PI. So i will have to find a solution to satisfy both.
So please advise.
Thanks,
Prasad.

Web Intelligence Rich Client without java - is it possible?

Hello!
Web Intelligence Rich Client without java - is it possible?
How about other client as Web Intelligence Rich Client, but without java?
Is it possible?
Regards,
Denis

It's very interesting, becouse i have installed pathes: ENTERPRISECLNT03P_4-10007619.EXE, CRYSTALREPORTS03P_4-10007442.EXE, BOBJINTGRSAP03P_4-10007514.EXE and problem was solved. Moreover I have uninstalled JRE. New problem not have come.
Regards,
Denis

"This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host does not support Intel VT-x"

Hi, I have installed vmware 5.5 hypervisor on hp G8 microserver. I have created one vm as windows 2008 R2. I have also install vmware workstation 11 on this vm. In this workstation when I tried to run vmware 5.5 hypervisor I come across "This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host does not support Intel VT-x" this statement. Which shows that the host machine does not support virtualization and for that you need to go in Bios and enable it but in present case as host machine is also a vm and you would not find much detail of Bios when you log into the Bios therefore, I am pretty much stuck here. I don't see any information in relation to this. Now my question is:
1. Can we run ESXi inside a vm which is already sitting on ESXi?

I moved the discussion from VMware Workstation to Nested Virtualization which contains several hints on what's possible and what needs to be configured to make things work.
André

Production Orders without Operations

Hi All,
lately we are seeing production orders in APO without operations/resource. We see this happening once we make change to production orders in ECC. Has anyone seen this issue? we have implemented report as per OSS note 918648 to provide a list of all the inconsistent orders. As a manual work around, we re-select the SOS ( Re explosion) to fix this issue. But for orders that have already started we are unable to domake this change. Note that these orders are not corrected in Compare Refresh report or OM17.
Any similar experiences with resolution are appreciated.
Regards,
Sandeep Mondkar

Hi Sandeep,
Suggest to check also whether
control key for the operation has been flagged for scheduling
Opeation time is not equal to nil
work center is active / transferred
With regards,
Mrinal

Definition of job SAPRUPGM is incomplete. Operation is not possible

Hello all,
We are administrating an SCM 5 system (APO to the old skool) and the previous administrator has left a job called SAPRUPGM that is scheduled but not released. When I try to release or change this job I get the messages
-"Definition of job SAPRUPGM is incomplete. Operation is not possible"-
Anyone know (a) how to get around this message and/or (b) what this job is for?
Cheers
Jamie

Hi Jamie,
As far as i know SAPRUPGM is runned after upgrading your system.
If the job has been scheduled and not released and everything seems to be running ok... I'll just delete it.
SM37 -> Job -> delete
Regards
Juan

DSC alarm set and cleared without operator ack - the variable should be not alarmed and not acked

We are deeply involved in porting our application from 7.1.1 to 8.6.1 under Windows XP.
Our application heavily depends on DSC and moving from 7.1.1 to 8.6.1 is actually much more than a simple porting....
here is our last problem:
it seems that there is no discrimination between 'active' alarms and 'acknowledged' alarms on a shared Variable in case the 'ack Type' is set to 'USER'.
Here is what happens:
1) a Boolean shared variable is defined to be alarmed when 'high' (TRUE) and its ack type is set to 'USER' (the operator at our application must ack alarms).
2) the Boolean var is set to TRUE -> it is declared alarmed (OK)  and not ack'ed (OK)
3) the operator ack the variable -> it is declared alarmed (OK)  and ack'ed (OK)
4) the Boolean var is set to FALSE -> it is declared not alarmed (OK)  and ack'ed (OK)
5) the Boolean var is set to TRUE -> it is declared alarmed (OK)  and not ack'ed (OK)
6) the Boolean var is set to FALSE -> it is declared alarmed (NOT OK!!!)  and not ack'ed (OK)
7) the operator ack the variable -> it is declared not alarmed (OK)  and ack'ed (OK)
This last case is the wrong situation: an alarm has been set and cleared without operator ack the variable should be not alarmed and not acked
Actually the variable returns OK only when ack'ed.
see the attached project in which a small vi and a small shared variable lvlib allows to repeat the above steps.
Note:
A) same situation applies to 'double' shared variable
B) under DSC version 7.1.1 everithing was OK
can anyone Help?
Thank You Guglielmo Rozera
Attachments:
AlmAckTest.zip ‏18 KB

Thank for your replay!
I have tried to undeploy and deploy the library with ack type set to 'User' by default, and then run the vi but the behavior is always the same.
The modification you suggest does not set 'User' ack type because data socket needs '2' as 'User ' setting while property node needs '1' or (better) its own enumerated type.
Anyway I've corrected the vi according to your suggestion and tried again but nothing changed...
Here I attach the project modified with property node and an indicator to show what is the actual ack type
I hope in your further investigations!
Thank You
Guglielmo
Attachments:
AlmAckTest_2.zip ‏20 KB

Create an apple id without operating email

Hi all,
I want to create a new apple id without giving any email. Is it possible? Can I use iCloud if I do not have an operational email?
Thanks,
Ziv

That exactly the problem. I do not have a .me account and I cannot create one any more. Both .me and iclound point me to create a new apple id, but I cannot create one if I don't have an email address.
Unless I'm missing something "the snake is biting its tail" is a good description of the icloud service to new users who do not already have an email address.
Ziv

Without EEWB Is it Possible to add field to standard tab

Hi Experts!
Without EEWB and enhancing Screen Is it Possible to adding field to standard tab. Any body can help out in this.
URGENT
Thanks
vikram.c

Yes it is possible, but we are talking a modification of SAP standard here. Also the effort needed will be at least 10 times higher than using EEWB as you have to reprogram all generated code / screen helps that SAP provides. Moreover these fields are then still not exchanged with the interfaces / BDocs etc which will be also some more days of work. There is no usable documentation on this - at least not by SAP and I am not aware of another one. It is much easier to create an EEWB enhancement and then move the fields from one tab to another.
Doing this all by hand is like adding a second processor to an existing motherboard for more performance compared to exchanging the existing one with one of higher specifications.This is possible, but requires a) more work/time/material b) more experience c) you lose warranty d) in the end you do not know for sure what the outcome will be
Regards, Kai

Idoc to soap sync without bpm. is it possible? Helping me..

Hi Experts,
i have a small clarification Idoc to soap sync interface in sap pi 7.0. i created IDoc to Soap sync using BPM but some times the signals are stuck due to load issue in swpr, while reprocess those signals all going successfully to the receiver. So We are trying to eliminate BPM.
I just wanted to know Idoc to Soap sync scenario without BPM is possible or not in SAP PI 7.0?
if it is possible kindly send me the links
Regards,
Kiran polani

Hi Kiran,
Could you please let us know the exact requirement. How do you want to send the response back to IDOC?
ASync - Sync Bridge with IDOC sender is not possible in PI 7.0.
If It is something like IDOC --> SOAP --> IDOC , And If the SOAP request is small then you can use SOAP Lookup in IDOC to IDOC Scenario.
In The mapping You can do a lookup and get the response from SOAP(Webservice) and map that to your Target IDOC.
This is one possible way for you without BPM in PI7.0.
Please let me know if you need more details about this.
Thanks
Jyothi A

Initialize delta without data transfer not possible

Hullo,
I want to switch the upload procedure for an ODS from full to delta. For I have researched SAP Note 689964 and executed the program RSSM_SET_REPAIR_FULL_FLAG for the ODS-object and datasource. It successfully modified the request and set the 'REPAIR_FULL' flag.
Now I want to change the InfoPackage from Full update to Delta. According to the note I have to perform an init simulation, my problem is that the option initialize delta without data transfer is in display mode only (i.e. it's gray and I cannot select it).
The InfoSource in question is "0HR_PY_1". I've checked several others and with some it is possible to select the initialization simulations and with others it's not.
My questions are a) Why is it this option grayed out? and b) What can I do to enable the selection of this option?
Any help is appreciated.

Hullo AK,
thanks for pointing out that note, sadly it's for "0HR_PY_PP_1" and not "0HR_PY_1".
However it lead us to note '611199'...
Symptom
Some attributes of the following DataSources are not defined.
0HR_PY_1 DataSource:
- Commit after initialization phase
- DeltaInit Simulation
0HR_PY_PP_1 DataSource:
- Commit after initialization phase
0HR_PY_PP_2 DataSource:
- Commit after initialization phase
Other terms
PXDW, extractor, posting transfer, settlement, PCPO, PCP0
Reason and Prerequisites
The SAP settings for the DataSources are incomplete.
The following attributes should be set:
0HR_PY_1 DataSource:
- Commit after initialization phase: no commit
- DeltaInit Simulation: Mode is not supported
0HR_PY_PP_1 DataSource:
- Commit after initialization phase: no commit
0HR_PY_PP_2 DataSource:
- Commit after initialization phase: no commit
Solution
Import the corresponding Support Package into the Plug-In Releases 2003.1 and 2002.2 and copy/activate the DataSources in the plug-in system again.
If the correction is imported, you can no longer select the "DeltaInit simulation" option for the delta initialization of the 0HR_PY_1 DataSource/InfoSource.
As long as you have not imported the correction or you are using an even older plug-in release, you should never select the "DeltaInit simulation" option during the delta initialization for the 0HR_PY_1 DataSource/InfoSource. The 0HR_PY_1 DataSource does not support this mode.
The 0HR_PY_1 DataSource only supports the delta initialization (without the DeltaInit simulation) and subsequent delta calls.
Sadly enough, not what I wanted to read, but well at least I now know that I shouldn't look into this solution anymore.
Again, thanks for your help.

Creation of Business role without allow user the possibility of personaliz.

Hi
I'm new in SAP. and I'm in need. Is it possible create Business Role (in CRM) without the possibility (for the user) to personalize the assignment block and the general setting?
Thanks for your future help!
Stefano

Hi,
this is possible by assigning the Function Profile 'PERSONALIZATION' with value 'ALL_DISABLED' to your business Role in the Business Role Customizing.
Kind regards,
Carl

Wifi without DataPlan is this possible on a 9810?

My wife and I have smartphones. I set mine up for Cell data (no data plan) and Wifi. So I can get internet services at home and work through routers, and at community centres and (we have kids) McDonalds.
I bought a 9810 to replace my wife's old 8310, hoping that she could get the same services as me, she loves Facebook. But without Data turned on, I can't use browse the Internet on her Torch. What am I doing wrong?
Older blackberries had different browsers for different services, but that was when I used them Corporately. The menu has changed so much; I have no idea what to look for now.

No, you don't need a data plan to surf via Wi-Fi on a BlackBerry, but you must have Data Service switched to ON. You might also have issues with some sites with no BlackBerry data plan (aka BIS for BlackBerry Internet Service) but most should work okay. If you have any issues, try using the Opera mini browser. By the way, on the 9810, it'll select the appropriate browser for however you're surfing.
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Overload new operator (Is it possible in alchemy?)

Is it possible to overload the global new operator ..
I am not able to do it linker gives an error like it is already defined.

Hi Aliaksei,
the PDF referred to mainly explains how to configure commands (within layout sets etc), but as far as I understand your question, you want to develop your own screenflows / command. First, I definitely would disadvise a beginner in the EP/KM area to start with such a task...
Anyhow, there is a one-step-screenflow-command tutorial on SDN: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/implementing flexible ui one-step-screenflow.article
For more steps, you could start decompiling a command class of a command which is more or less similar to your needs (and the underlying classes) to get further insight.
If you really should get that far and have implemented your own command, you just can switch the implementation class if you want to change the logic for an existing command under System Admin - System Config - KM - CM - UI - Commands - UI Commands - <command in question> Java Class setting.
Hope it helps
Detlev

BAPI_ALM_ORDER_MAINTAIN - Without operation. Is it possible ??

Similar Messages

Maybe you are looking for