BAPI/BAdI/OSS notes for PRT measuring.document auto.update -REM scenario

Dear Forum members,
In a REM scenario how to pull the PRT's assigned to the individual operation in the routing to the planned order.
(In my understanding if we carry out a elad time scheduling we get the operation deatils along with the timings under the detailed
planning tab and we can see the component's list)
Is there any OSS notes/BAdI/BAPI which addresses the measuring document update automatically as per the confirmation
quantity made in a REM scenario.
Eg: If the confirmation quantity is for 100,then whatever the PRT(equipment category)linked to the routing should get updated
automatically for 100 quantity,(the measuring document should get generated for an usage value as 100).
Please give your suggestions and input on this concept.
Regards
S Mangalraj

Hi Mangal ,
What is your exact requirement and why are you using PRT as equipment  ?
You can use PRT as Material and consume in order if required . Also create document in CV01N and assign in BOM as
component with Document category.
Regards,
Jayavimal
Edited by: jaya vimal on Jun 18, 2010 2:08 PM

Similar Messages

  • User exit / BADI /OSS notes for VL02/VL03 TCODES

    Hello ,
    Can anybody please proide the inforamtion
    if there is any user exit or BADI or OSS notes available to enhance VL01 / VL02 / VL03 tcodes
    regards

    Hi
    Enhancement
    VMDE0004                                Shipping Interface: Message SDPACK (Packing, Inbound)
    VMDE0003                                Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0002                                Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0001                                Shipping Interface: Error Handling - Inbound IDoc
    V53W0001                                User exits for creating picking waves
    V53C0002                                W&S: RWE enhancement - shipping material type/time slot
    V53C0001                                Rough workload calculation in time per item
    V50S0001                                User Exits for Delivery Processing
    V50R0004                                Calculation of Stock for POs for Shipping Due Date List
    V50R0002                                Collective processing for delivery creation
    V50R0001                                Collective processing for delivery creation
    V50Q0001                                Delivery Monitor: User Exits for Filling Display Fields
    V50PSTAT                                Delivery: Item Status Calculation
    V02V0004                                User Exit for Staging Area Determination (Item)
    V02V0003                                User exit for gate + matl staging area determination (headr)
    V02V0002                                User exit for storage location determination
    V02V0001                                Sales area determination for stock transport order
    Business Add-in
    DELIVERY_ADDR_SAP                       Address Change in Delivery Processing
    DELIVERY_PUBLISH                        Announcement of delivery data during database update
    regards
    Pavan

  • Exits or oss notes for tcode RECN

    Hi all
    can u pls let me know exits or OSS notes for the tcode RECN

    Hi Shwetha,
    There are no user exits for RECN.
    Instead there is a badi associating this transaction(RECN) -- <b>BADI_RECN_CONTRACT</b>
    Reward if useful.
    Thanks
    Aneesh.

  • How to check Reconcilliation has happened or not for a payment document

    Hi,
    How to check Reconcilliation has happened or not for a payment document? Payment doc ABCDEF was created on 2nd. Now i am not sure whethr RECON has happend ot not
    Please help.

    Dear,
    If you have made payment to vendor and want to know whether reconciliation happened or not then check if this document exist in table BSIK then reconciliation has not been done.
    Regards,
    Chintan Joshi.

  • OSS notes for MB1B in checking Amount and Quantity depending on the mat. #

    Dear All:
    Where can i download OSS notes in MB1B for  checking the amount and quantity depending on the material number?
    Thanks,
    CHOCO

    Hi ,
    We are not getting what you mean to say.
    But as far my understanding of your query I am giving the reply.
    OSS notes can be download at the tcode SNOTE.
    Pls go to the tcode SNOTE-> GOTO ->DOWNLOAD SAP NOTE.
    here you need to give the sap note number.
    To get this number you first need to search in service.sap.com and find the relevant note that is useful for ur scenario.
    And after finding that note and we need to give this number in SNOTE tcode and we need to download.
    Pls tell me your requirement clearly so that i will try to find a oss note for you.
    Pls get back to us for further assistance . Happy to help you.
    Regards,
    Viveks

  • OSS notes for a Deleted Delivery

    Hi Experts,
    We have a strange issue. One of the users deleted the deliveries for an order. We  now want to delete the Order too. But we are unable to track the order.
    Since delivery is deleted, it is not possible to identify the related Sales order number or the materials attached to the delivery.
    do we have any OSS note for this ?
    Thanks,
    Arthy

    Dear Lakshmipathi,
    Thank you for your valuable suggestion. But we actually are trying to create a shadow table or a backup table to record the deleted delivery details in future. Could you suggest what this table should be like,how and what details should  we capture and how the new table should work in order to capture the deleted delivery details?
    Please let me knowif you have any possible suggestions for creating this shadow table.
    Thanks in Advance,
    Regards,
    Arthy

  • OSS Note for dump in program LOLEAU02

    Hallo Everybody,
    I need help in finding an OSS notes for the runtime error MESSAGE_TYPE_X in the program LOLEAU02.The last modified date of this program is 6.11.2003.
    There are many OSS notes and I couldn't able to sort the OSS note for this particular runtime error.I have given some details about the dump.
    <b>
    User and Transaction
        Language key........ "F"
        Transaction......... "IW32 "
        Program............. "SAPLOLEA"
        Screen.............. "SAPLSCAC 0100"
        Screen line......... 0
    Information on where terminated
        The termination occurred in the ABAP program "SAPLOLEA" in "AC_SYSTEM_FLUSH".
        The main program was "SAPLCOIH ".
        The termination occurred in line 29 of the source code of the (Include)
         program "LOLEAU02"
        of the source code of program "LOLEAU02" (when calling the editor 290).
    Source Code extract
    24     WHEN 1.
    25 *     system_error
    26       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 007 RAISING CNTL_SYSTEM_ERROR.
    27     WHEN 2.
    28 *     method_call_error
    >>       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
    30     WHEN 3.</b>
    Thanks in advance.Any inputs on this will be helpful.
    Regards,
    Raj

    Hi,
    Thanks Chandrasekar.
    The thread has the same dump except the main program which is <b>YQ9_UPLO</b>.In my case the main program is<b> SAPLSMTR_NAVIGATION</b>.
    Still the dumps occurs and I am unable to find the root cause. Any inputs will be som helpful.Thanks in advance.
    Regards,
    Raj

  • OSS note for batch field in LT12 (Program:SAPML03T; screen: 1141)

    Hi guys,
    before ECC 6, batch field in LT12 has search help. In ECC 6, batch field has no more search help.
    Is there an OSS note for the batch field in LT12 to have search help again/
    Thanks!

    check if it was custom search help in earlier version, which will be required to be created again after upgrade. nor worked on LT12 but we had to do it for many transactions in last upgrade.

  • OSS Note for Global Employee Management in 4.7

    Any information on OSS Note for Global Employee Management will be highly appreciated and points will be awarded promptly.
    Learner

    Hi,
    OSS Notes for Global Employment or Concurrent employment are very specific to the country for which it is used.
    i.e it is specific to thePayroll of the  Host country.
    Please be specific about your requirement.
    regards,
    Raj

  • Pls som1 send me sap oss note for customising higher edu cess (1%) in CIN

    hi
    pls some body send me sap oss note for customizing higer edu cess in cin
    bcoz i dont have id n password for sap marketplace/help portal.
    my email id [email protected]

    Hi
    I have sent the following notes to your mail id:
    1040241 Incorrect calculation of Sec & Higher Education CESS in J1IG
    1044509 Master note for SECess in release CIN30A - Budget 2007
    1032265 Budget 2007-Legal implications
    1055370 ER1: Changes for SECess as per budget 2007-08
    Cheers
    Jags

  • Suitable OSS Note for special charecters when upload a file

    hi,
    can anbody help me in finding OSS Note for
    special charecters in file upload as i was unable to print  'é' this charcter as a result it was going into short dump
    Please help me

    Hi,
    Are u using smatrforms, if it is
    Create text in smart form->click edit button of text->menu->insert->characters->displayable characters->then select ur special charactor.
    that no will display in text node. check that no with OSS note.
    Thanks,
    Sendil

  • Oss note for po acknowledgement

    Hi ,
       can any one post oss note available for process code ORDR for inbound po acknowledgement ( FM IDOC_INPUT_ORDRSP ) very urgent.
    thanks in advanvce.

    Hi,
    OSS Notes for Global Employment or Concurrent employment are very specific to the country for which it is used.
    i.e it is specific to thePayroll of the  Host country.
    Please be specific about your requirement.
    regards,
    Raj

  • OSS NOTE FOR # REMOVAL

    hi friends
    can any provide any oss note for # removal
    I tried all as to maintain all the characters in RSKC,ans RSALLOWEDCHAR table
    but it is not working,daily iam getting the # into my data
    Thanks in advance
    sridath

    Hello,
    Write a conversion routine in the update rules for the required infoobject, like this:
      DATA: SRING_MOD LIKE COMM_STRUCTURE-INFOOBJECT WITH #
      DATA: l_d_offset LIKE sy-index.
      DATA: N TYPE I.
      CONSTANTS: c_allowed(100) TYPE c
         value  'ABCDEFGHIJKLMNOPQRSTUVWXYZÁÉÓÕÚÀÍÇÃʺª!?.-,$#"&+():;1234567890_'.
    STRING_MOD = COMM_STRUCTURE-INFOOBJECT WITH #
    Só Maiusculas Permitidas
      TRANSLATE STRING_MOD TO UPPER CASE.
      N = strlen( STRING_MOD ).
      DO N TIMES.
        l_d_offset = sy-index - 1.
        IF STRING_MOD+l_d_offset(1) CO c_allowed.
        Allowed, do nothing
        ELSE.
        Don't allowed, replace by blank space
          STRING_MOD+l_d_offset(1) = ' '.
        ENDIF.
      ENDDO.
    RESULT = STRING_MOD.
    Regards,
    Jorge Diogo

  • OSS Notes for Workflow Problem? Is it the solution ?

    hi all,
    i'm currently working in CRM 4.0
    i have a problem in workflow. for certain condition, the value from workflow container is not transfered to the task container.
    i have checked the oss notes for this problem and i find 2 notes that might solve the problem.
    the 2 notes is : "Note 847122 - Workflow container loses values" and "Note 862333 - Container has obsolete values at runtime"
    does any one have implement these notes or have solve the problem i have?
    please help. any advice will be appriciated.
    many thanks in advance
    regards
    eddhie

    After an update it's not new the first reboot taking longer than normal
    but it isn't normal if the problem stays as it is.
    So try rebooting again and if it again takes longer than a minute I suggest you try the following.
    Shut down WIFI and reboot
    Still the same problem
    Shut down Bluetooth
    let me know ok?

  • OSS Notes for Tcode: VT02N

    Hi All,
    Is there any OSS  Notes for Tcode:VT02N.
    In my system VT02n is dumping.
    Can  anybody tell me about OSS Notes so that i can apply for the that.
    Thanks in Advance.

    Hi ,
    While executing Tcode VT02N after giving shipment Number & enter .
    After clicking on planning buttion & save it's going to dump.Giving message as below.
    Error analysis:
        Calling a COMMIT WORK in an update process is not allowed
        because the function modules triggered in a Logical Unit
        of Work cannot then be processed correctly.
      154   CALL FUNCTION 'GET_HANDLE_SD_BILLING'
      155     IMPORTING
      156       handle = l_sd_billing_exit
      157       active = active.
      158
      159   IF active = 'X'.
      160     CALL METHOD l_sd_billing_exit->invoice_refresh.
      161   ENDIF.
      162
      163
      164   IF with_posting CA 'CD'.
      165     COMMIT WORK AND WAIT.
      166   ELSEIF with_posting CA ' AB'.
    >   COMMIT WORK.
      168   ENDIF.
    In Executing the Commit Work it is going dump.
    Pls let me know if u have any idea.
    Regards,
    Priya Agarwal.

Maybe you are looking for

  • Apple Start page no longer works with Safari 1.3.2?

    I just set up an iBook G3 with Mac OS X 10.3.9, with all updates, and opened Safari, which is set to got to the Apple Start page initially: http://www.apple.com/startpage Safari loads the page, but two areas are blank: the "Hot News Headlines" in the

  • OracleXMLSave - Insert into table with NOT NULL Columns

    Im having trouble using OracleXMLSave (XSU12) to insert into a table where columns are initialized on insert with system derived values (see table script below) I get the following error message. Message: 'java.sql.SQLException: ORA-01400: cannot ins

  • Different languages are not available for Web Dynpro ABAP (WDA)

    Hi Experts, We are using Web Dynpro ABAP in 2 different languages (English/Spanish). Production environment only is available for English (WDA). How can I make Spanish language available for Web Dynpro ABAP??. Is there any configuration or installati

  • How do I delete alcoholsoft from firefox toolbar ?

    '''''''''bold text''' How can I delete Alcoholsoft app from firefox toolbar . I appeared a couple months ago and now there is nothing I can do to get rid of it !

  • Change font Size for Lock Screen Message

    In system preferences Security & Privacy you are able to set a lock message for the lock screen. Is there a way to change the Font Size or even the color of the message in Mavericks?