BAPI "BAPI_POSRVAPS_GETLIST2" not extracting Orders with category BC and BD

Hi,
I am using a BAPI  "BAPI_POSRVAPS_GETLIST2"  to extract the receipts and requirement elements from live cache, however I found that this BAPI does not extract orders with category BC and BD (Stock transfer reservation).
Can you kindly let me know whether this is correct ? BC and BD does not fall in receipt or requirement category ?
If yes then which BAPI should I use to extract orders with BC and BD category ?
Thanks & Regards,
Rohit

Hi Rohit,
  The categories BC & BD are coming under reciepts & requirements only and i guess should be retrived by standard BAPI.
Please try using BAPI BAPI_POSRVAPS_GETLIST3.
and also mention correct 'locationproducts' as mentioned in the below thread.
Purchase order data for ATP category BH and BI not retrieved
Initially plese try to retrieve the details by 'Order number' to make sure the BAPI is working fine. Later you can do it by locproducts and ATP category.
Hope it helps.
Regards,
Deepthi

Similar Messages

  • BAPI not extracting orders with category BD and BC

    Hi ,
    i  tried following BAPI to extract orders category datas from live cache.
    BAPI_POSRVAPS_GETLIST2
    BAPI_POSRVAPS_GETLIST3
    But both the BAPIs  not extracting orders with ATP category BD , BC .
    Any one faced this issue? Or  do i missing anything.
    Is there any other BAPI or functional module available  to extract this??

    Hi rajesht ,
    On which version are you working on?; check that the order is on the validity of the planning version. Once I get this behavior, I re-transported the data source and replicate data sources; after that I could see the information; nevertheless, there are on OSS some notes could apply (depending on your version).
    Best regards,
    Gustavo Pérez

  • 2LIS_11_V_SCL not extracting orders with doc_type 'Z**'

    Hi All,
    We are not getting any schedule line data records for order with document type 'ZDS'(custom type) while extracting from the data source 2LIS_11_V_SCL. We do get records for the same sales order from data sources 2LIS_11_VAHDR and 2LIS_11_VAITM.
    I checked the sales orders with doc_type 'ZDS', in R/3 and there are schedule lines existing for those orders but the same is not getting to BW thru the extractor 2LIS_11_V_SCL.
    Any idea what could be wrong?
    Thanks in advance.
    Cecil

    Then I believe you need to enhance your user-exit for that extractor to pick up those new order types as well.

  • Need     RFC/BAPI    to create Delivery Order  with respect to  Sales Order

    Hi Gurus ,I'm   new  to  AB AP  Language   to be  working  in company
    so  can anyone  tel  me   FM/BAPI   to create  Delivery  order  with respect to  sales order(va01,vl01n)
    Any  sugg.. will appreciate  u.........
    Thanks in Advance...........

    Hi,
        Try this BAPI
    BAPI_SALESORDER_CONFIRMDELVRY
    Regards
    Bala Krishna

  • BP created with category Person and BP Role Consumer is not replicated

    Hello Gurus,
    I have created a BP with Category Person and BP Role Consumer but after saving my BP is not getting
    replicated to ERP, though in the Clasification Tab i could see consumer is being selected and the Account
    group 0170 - Consumer showing up. 
    I have also checked in PIDE transaction in ERP system this Account group has clasification E which is Consumer.person,and as numbe range is assigned to this Account group 
    i have checked in middleware there is an error message which says "BP XXXX doesnt not exist as customer,change not possible" and aslo one more message which says "no classification is assigned to BP"
    any customizing is missing in CRM system, or only customiaing required is in ERP only?
    Thanks and Regards
    chandu

    Hi,
    With respect to your question on below link.
    Re: BP created with category Person and BP Role Consumer is not replicated
    Please find the below path in ECC
    SPRO>Logistic General>Business Partner>Customer>Define Account Groups and Field Selection for Customers.
    Select 0170 Consumer account grp and click on details. You will see the Number range in General Data.
    Copy that number range and goto below path and check if the number range is internal or external.
    SPRO>Logistic General>Business Partner>Customer>Define and Assign Customer Number ranges. The popup will appear and select Define Number ranges for customer master. Click on display intervals. You will see the number range is mainatined internal or external.
    Hope this helps.
    Regards,
    Chandrakant
    Edited by: Chandrakant A on Dec 15, 2009 7:41 PM

  • Report to Purchase Orders with Good Receipt and pending for Invioce Receipt

    Hello,
    I'm looking a report bring me Purchase Orders with Goods Receipt and waiting for Invioce Verificacion (MIRO).
    I appreciate any help.
    Regards,
    Hector

    Hi,
    ME2N - In selection screen, enter Selection parameters as
    WE102 i.e. Goods receipt exists and in output screen put a filter on "Still to be invoiced (qty)" and "Still to be invoiced (val.)" as not equal to zero OR greater than Zero.
    OR use RECHNUNG i.e. Open invoices and execute the report
    OR Use MB5S - GR/IR Balances

  • Is it possible to make an order with danish keyboard and documentation

    Hallo
    I need a computer with danish keyboard so my question is
    Is it possible to make an order with danish keyboard and documentation
    Jesper Nielsen

    You can give each track its own artwork. iTunes will normally display the artwork of track 1 in album listings. The individual track art will show in the small window at the top of the screen when playing, or the artwork panel of the mini player, or the now playing window on a device. Try it and see.
    tt2

  • Existing Apple ID is not longer working with Face Time and Message on the iPhone after iOS 6

    After the IOS 6 update on my iPhone the Apple ID is not longer working with Face Time and Message. Each time I try to log in I receive the message that the password or the user is not right. But they are, because on all other devices and all other parts of the iPhone (iCloud, AppStore, iTunes) they are working. Other Apple IDs are working fine.
    What's wrong? Any idea?
    Thanks

    Blue
    It sounds like you restored from an old back-up.  Did you back-up just before your software update?  It will use your last one and if your last back-up was a ywear old then it will use that one.
    In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
    Sorry for your losses.
    Cheers

  • The Battery in my laptop has been replaced twice and this is the third time the battery has swollen up. Since the first time it was swollen I have asked the reason but Apple has not come up with a reason and just replaced it. Second time also the ser

    The Battery in my laptop has been replaced twice and this is the third time the battery has swollen up.
    Since the first time it was swollen I have asked the reason but Apple has not come up with a reason and just replaced it.
    Second time also the service centre replaced the battery but were unable to give me a reason.
    I had asked them to replace the laptop as this has been happening repeatedly and seems to be something with the laptop
    otherwise why should every battery they put swell ?
    This is the third time this has happened. And now they refuse to replace the battery or the laptop also.
    What is the solution?

    Make an appointment at the Genius Bar of an Apple store and press the problem. Elevate to store manager if necessary. Maybe the charging circuits are defective resulting in overcharging which is causing the battery problem.
      Apple Retail Store - Genius Bar

  • Why is photostream not working together with my macbook and iphone?

    Photostream is not working togther with my macbook and iphone. How can I sync it?

    Has it ever worked?
    If you recently turned on photo stream on the mac and iphone, then (on the iphone) only new photos are included in photo stream, old ones are not.
    But syncing to your mac (if the photos originate from the iphone) is critical.  That's how you store photos (they can easily disappear on the iphone due to many "issues" that can occur, and relying on an icloud backup is not safe - to many users have lost some/all their photos when doing a restore.
    So be sure to begin by doing a sync to the mac using itunes/iphoto with a USB cable. 

  • T400 does not start up with a battery and AC, but starts up with only AC.

    I bought T400, 7417-CTO in Jan 2010. My T400 does not start up with a battery and AC power. I tried to start with only AC power after pulling out the battery, it worked fine. Even when I inserted the battery in T400, which was running perfectly with AC only, T400 seems to lose the power - more strictly speaking, it kept stoping and re-running several times, and finally it dead.
    a few possibilities
    1) a battery is dead - but it does not explain the failure with both AC and battery
    2) some hibernation issue - I plugged in and out the DIMM, and clock battery. I tried to keep pushing the power button trick, but it didn't work
    3) Mother board failure??
    I really appreciate if you give me some advice on it.
    Wanyong

    Thanks for all your kind and helpful comments.
    Unfortunately, I don't have any friends who have Lenovo - or I don't have many friends here since I moved in the last summer. ;-)
    After purchasing a new battery, I will update it. Hope that this thread helps someone who had/will have same prob. as mine.
    -WS

  • HT201413 I can sync my contacts but not my calender with iphone 4 and outlook 2007 for windows XP. It was working OK up to a month ago

    I can sync my contacts but not my calender with iphone 4 and outlook 2007 for windows XP. It was working OK up to a month ago

    I found this link:
    http://xlii.be/2011/10/how-to-get-icloud-windows-xp-and-outlook-to-work-together /
    Hope it helps some other noobies like myself.

  • I bought a second hand Macbook Pro and colorful stud Only after a few months I decided to reformat it Bad movie started here I did not get it with a disc and I come to install the operating system And he asks the name of Apple's user ID financed had been

    I bought a second hand Macbook Pro and colorful stud
    Only after a few months I decided to reformat it
    Bad movie started here I did not get it with a disc and I come to install the operating system
    And he asks the name of Apple's user ID financed had been bought Lion OS Now
       And who sold me does not answer then I found the phone number of his mother
    She said he lived in USA and paid him more than the lion version of the MacBook and now I can not install Lion
    And I'm not from USA

    Unless you go back to the original owner, yes you need to pay for it again.
    You're entitled to the OS that shipped with the device from Apple, but if you don't have that media there's nothing you can really do.  If the system originally shipped with 10.7 or 10.8 then when you boot it to Internet Recovery, it will automatically offer you that OS version (as the serial # is registered with Apple).  If it shipped with an older OS, then you need to enter the Apple ID that purchased 10.7 or 10.8.  You didn't purchase it so that's not you.
    The options you have are to buy Lion for $29 US (I don't know the price in Palestine), or Mountain Lion for $19 US (don't know the price in Palestine either), and install from scratch.
    And it's a good idea to know you have restore media before you reformat your machine.

  • BAPI FOR CREATING SALES ORDER WITH REFFERENCE TO QUOTATION

    Hi All,
    I am creating sales order with refference to quotation by using bapi "BAPI_SALESORDER_CREATEFROMDATA".Able to create sales order but its not refferencing qutation.Is there any other bapi for this scenario.Please guide me.
    Regards,
    Suresh

    Hi ,
    Thank you for giving reply I tried by using bapi BAPI_SALESORDER_CREATEFROMDAT2 after execution it giving sales order number but when I am trying to see that sales order system is giving error message as document is not exist.
    Please guide me.
    Suresh

  • BAPI to create Sales Order with reference to contract

    Hi All,
    I am trying to create Sales Order with reference to Contract, but although the
    order gets created, it does not contain reference document information. 
    The BAPI I am using is BAPI_SALESORDER_CREATEFROMDAT2. 
    Would someone know which parameters I have to papulate,or have any other suggestion
    how to accomplish my task? 
    Thank you so much, 
    Mayank

    Hi - Try Filling these three fields in the Item details.
    REF_DOC
    REF_DOC_IT
    REF_DOC_CA
    Reward points if helpful

Maybe you are looking for

  • Crystal report rpt file import error.

    Hi, when iam  importing rpt file after updating it's showing system message This  SQL transaction has completed,it is no longer usable. and it's showing operation sucessfully completed but it's not showing in manage crystal reprots list.plaese help m

  • [SOLVED][Gnome 3.6] notification / notify bug - ONLY icons are shown

    Hi, since the upgrade from gnome 3.4 to 3.6, the notify notifications at the bottom only show the icon associated to the notification, and nothing else (the background/text just my browser showing some text from an arch wiki site...) : The screenshot

  • My I pod will not let me install anything on it what happen, please help

    my I Pod will not let me install anything, what happen and how to correct

  • Where do i go to activate vevo?

    I got apple tv and i want to sign into vevo, it said i must logged into your vevo account so i went to vevo.com/apple and have not been able to log on to set my activation code. what should i do? am i going to the wrong place? can someone tell me how

  • HEEEEEEEELP!!!! website crashes on Safari

    hi, I created a site and it works perfectly on IE en FF but when I open it in Safari it crashes immediately. Can someone help me please. This is very urgent! Thanks a million guys! grtz Anthony.