BAPI CASESERVICE CREATEMULT - Alternative price not allowed for the service

Hi,
I am using .Net Connector to connect to BAPI. I am developing a .Net order processing application and intend to send the order information to SAP using BAPI_CASESERVICE_CREATEMULT.
However, I keep getting the error message "An alternative price is not allowed for the service..". The service id is already setup at SAP and I am not sending any price information. I am only sending quantity. The DIFF_PRICE is set to 0.
Any advice? I appreciate your help.

Similar Messages

The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTR

Hi all,
BAPI' BAPI_MATERIAL_SAVEDATA' throws error the below error while creating material.
'The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTRL_CODE'
Any idea abt this error.
Regards,
Thiyagu

Hi,
As this BAPI is triggered from external sytem that by client in production environment , I would not be able to dig it further.
Thats why I asked if anybody confronted the same error previously.
Thanks for suggestion.

Limit PO Err Combination of GR/IR control not allowed for external services

Hi,
I am having a problem while replicating free text Limit PO's to R/3 in SRM 4.0 SP 13. The issue is while creating Free Text Limit SC with the "Confirmation and Invoice" option checked in, the PO's get created in SRM but fails while replicating to R/3 and in RZ20 errors as "Combination of GR/IR control not allowed for external services" although in vendor master i don't have check for the field "GR-Based Invoice Verification".
On the contrary while creating SC with the "Invoice Only" the PO is successfully replicated to R/3 with item category as B for limit orders.
Now i have noticed if i make changes in the vendor master data i.e. check the flag "GR-Based Invoice Verification" then the PO in my first scenario gets replicated successfully and also with respect to the second scenario but it gets replicated in both the scenarios as item category "D".
As far as SRM standard it should have ideally behave like the below:
Limit SC with GR AND Invoice -> item category D
Limit SC with invoice only -> item category B.
Now my question is why do my PO's fail in R/3 in the first scenario and also if i check the flag in vendor master for GR-Based Invoice verification then in the second scenario the item category is "D" instead of "B".
Thanks in Advance.
Best Regards
Anirban

Hi Georg,
We don't have any active implementation for the BADI BBP_PO_INBOUND_BADI.
Best Regards,
Anirban

Limit PO :Combination of GR/IR is not allowed for external services

Hi,
we are working in SRM40 sp09 & back end ECC.50
In the Limit PO:
we are able to create Limit PO from a shopping cart.The follow on documents in ECC, it is creating a PO with Item category "B" and the "invoices" are only possible.
The Issue:
The Client wants the Confirmation/GR functionality to be enabled and the Invoices.
but for Limit PO, with follow on documents--"Confirmation" is checked, we have a error messagecombination of GR/IR is not allowed for external services".
Is there any addition configuration or steps involved.
Thanks and Regards,
RK.

Hi
Please go through the links below, which address the same issue ->
Limit PO(Item category D instead of B)
SRM: Item category B/D for limit PO
Re: Problem with Unknown account assignment with limit order...reply soon...
Do let me know.
Regards
- Atul

Combination of GR/IR Control not allowed for External Services-SRM PO error

Hi All,
SRM 5.0 ECS R/3 4.6C
We have a service PO, for which an error Combination of GR/IR Control not allowed for External Services is being displayed.
The PO is in error in process at this moment. And is not in R/3
On SRM PO we have Confirm Performance of Service/Goods Receipt checked and Invoice Expected checked.
Confirmation-Related Invoice Verification is not checked. Any thoughts on this!!
Thanks
Krishna

Hi
Please go through the following SAP OSS Notes ->
Note 725824 - MB5S: Error with purchase orders for external service
Note 781014 - Clearing values in purchase order currency are too high
Note 991800 - MB5S: Error in delivery costs (2)
Note 960789 - Wrong Values in MM Document for Service Based Invoice
Note 778562 - MM-IV: invoices are entered before the goods receipt
Note 578531 - Incorrect FM update for service purchase orders
Note 635864 - ME2S: Invoice value is calculated incorrectly
Note 570409 - Unplanned account assignment in invoice for service PO
Note 545684 - MIR4 for SRV: Incorrect data displayed if deletion indicator
Note 544567 - Transaction MIRO: incorr. default values at (parked) invoice
Do let me know.
Regards
- Atul

The value is not allowed for the field Cross-plant CM

Hello All
When i copy material in refernce to existin gone. I am getting this message
"The value is not allowed for the field Cross-plant CM"
I am not putting any thing in this Basic-view Cross-plant CM, but still getting this message.
Any help will be good...Thanks in advance...

Hi,
Please check the check box in front of the field config material is checked?
If so then this material is configurable material
A material that can have different variants.
For example, a car can have different paint, trim, and engines.
Configurable materials have a super bill of material (BOM) that contains all the components for producing every variant of the material. Similarly, they have a super task list that contains all the operations. When a material is configured, only the components and operations needed for a variant are selected.
Please check
BR
Diwakar

The value 1 is not allowed for the field variace key

Hi experts,
When i was creating material master i was getting the status message as "the value 1 is not allowed for the field variance key" , but its stopping there its not moving out of that screen and creating the material record. When i see this field in the material master configuration its an optional field. Can you give me suggestions, where it can go wrong.
Thanks & Regards,
Ravi.

Hi
Can u tell me the field name . I cant get that field ref key. In which view does it come.
Reg
Raja

Combination of GR/IR control not allowed for external services

Hi,
I need to uncheck the field GR-Based IV (EKPO-WEBRE) in the SERVICE PO but I receive the message :
"Combination of GR/IR control not allowed for external services"
I want to allow the user to receive Invoices (MIRO) before the Service Entry (ML81N).
Thanks.
Carlos Durazo

HI,
This is a "hard coded" option and cannot be removed.
If you want to be able to post invoices for services before the GR (acceptance) then you could consider using "normal" POs for these (without item category "D") abd use material masters (DIEN material type) or describe the service in text.
External services POs are only really suited to complex services or services that need a two step GR process (Service entry and acceptance).
Far too many organisations use the service entry sheet option when "normal POs" would be far better.
Steve B

The specified HTTP method is not allowed for the resource identified by the Data Service Request URI

Hi Experts,
I am getting following error in creating gateway service. 405 method not allowed.
I am trying to update a table using put method.
Regards,
Dinesh Jeyasurian

Hi Dinesh,
you are getting error because it is not the correct way to perform PUT operation.
Please refer my blog Let’s code CRUDQ and Function Import operations in OData service! and see section Update operation.
Regards,
Chandra

Why is "onLoad" not allowed for the div tag in the behaviors effects?!

I have a js menu positioned relatively over a Flash intro in hybrid fashion; I'd like for it to appear gradually on Load so that it appears at the end of the intro, but you can't use onLoad for the div tag apparently. Is there any other way to do this? I do NOT want to have to create a navigation menu in Flash...

As David says onLoad does exactly what it says, triggers the event on page load.
A simpler solution would be to attach a JavaScript behavior to the onLoad event or separately it would not matter, to gradually fade-in your menu.
There are many utilities to do this and all are dhtml, Try searching for one and adding it to your webpage.
See the spry fade-in/out for an example of a simple effect, (you would have to adapt it to your requirements as with most special effect behaviors).
Link to spry:
http://labs.adobe.com/technologies/spry/home.html
PZ

HT1535 Does iTunes 11 allow for the "dragging" and "dropping" of music from a library onto a manually managed device?

It appears that iTunes 11 does not allow for the "dragging" and "dropping" of music from a library onto a manually managed device.. is that true? I am trying to drag a playlist onto my iPhone. I've done it many times before on previous versions of iTunes but now that the menu is up in the heading, I can't drag the playlist onto the icon for my iPhone.

Zmaj3 wrote:
It appears that iTunes 11 does not allow for the "dragging" and "dropping" of music from a library onto a manually managed device.. is that true?
No.
Sync you are not syncing, the ONLY way to get items onto a manually managed device is to drag and drop.
However, I feel a much simpler way is to create a playlist and add/remove songs from this playlist and autosync this playlist (or multiple playlists). I use about 6 or 7 playlists
You can still also drag & drop songs while autosycning.

Zero not allowed for price condition type

Hi experts,
   I have a scenario related to return. Based on the received return goods quality, we give different % of reimbursemnet to our customer.
Currently, in my pricing procedure, I have
PRICE COND 1 (which is the original selling price) (not allow manually change)
HA00 (depends on the % of reimbursement, we apply a %. Let's say we give 70% reimbursement to our customer, then we input -30%)
PRICE COND 2 (which is the net value of PRICE COND1 and HA00, calculate type is 2 - Net value)
For PRICE COND 1, and HA00, we haven't assigned any account key to them, since they are for reference only and shouldn't have any account posting.
The problem now is that, we received return goods with damage, and need to give 0% inbursement. For inventory point of view, we do receive the damaged goods and then directly go to scrap. However, when we try to input -100% in HA00 (so net price for that item is 0), error occurs when we issue credit for return, account cannot determined for PRICE COND 1 and HA00. It is because when PRICE COND 2 is not zero, PRICE COND 1 and HA00 are both become inactive in conditions. But now, since PRICE COND 2 is zero, both PRICE COND 1 and HA00 are become active and due to missing account key, it creates the error during account determination.
   Please kindly help. Thanks.

hi gundam,
   why do u need to create a credit memo for 100% loss?
just need the material movement document that will update the stock accounts then add a billing block.
thank you and best regards.

Actual activity allocation is not allowed for order .

hi ,
During confirmation of operation at co11n (also at co11), got one error massage i.e "actual activity allocation is not allowed for order "
Due to this error confirmation is not possible .
pls help me to solve this problem.
AMOL WAGH

Dear,
What is message number? Did you assign the usersttus in BS02?
For allocation activity costs, we need to define activity type in KL01 by specifying the unit of measurement of the particular activity type (like machine - Hours etc.). While creating activity type, we will assign a secondary cost element (with category 43) in the activity type through which the activity cost will flow.
After that we will plan for cost center in KP06 (cost elementwise). Then we will plan machine hours in KP26 where we will link the activity type to a particular cost center.
When we do price calculation in KSPI, system checks the planned costs for cost center (in KP06) and also checks the machine hours planned (in KP26) and gives the cost for the particular activity type.
Please check the above in the system
Regards,
R.Brahmankar

Payment method(s) are not allowed for this program / Program RFFOAVIS_FPAYM

Dear Friends,
In Se38 abap editor, I entered the program RFFOM100, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Payment method(s) are not allowed for this program'.
Payment method S is not used in F110, It was not mentioned in vendor master or vendor invoice.It is not mentioned in fbzp in bank determination. When i tried to delete payment method 'S' the system shows a message Payment Method S is being used in the company code.
In the program RFFOAVIS_FPAYM, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Program RFFOAVIS_FPAYM: No records selected'. But there open items or invoices.
Please suggest how to resolve the errors.
Regards
Sridhar

Hello,
Why are you directly executing these programs?
You will not expect these program to execute directly by going to SE38.
I would have configured the relevant payment methods in the country with DME structure or classical RFFO* programs, which in turn pick up the inherent programs at the time of running F110.
For example, if you need to generate BACS file for country GB, either you copy the GB_BACS to ZGB_BACS or use GB_BACS directly in FBZP settings.
Make sure that you have maintained OBPM1 / OBPM2 / OBPM3 and OBPM4 settings properly.
The system automatically gives the access to system RFFOAVIS_FPAYM. Prepare a variant against this program in F110. Relevant file gets generated to folder path mentioned in OBPM4 will get generated. The file get generated can be seen in AL11.
Hope this is informative and solves your issue.
Regards,
Ravi

ABAP Dictionary type FLTP is not allowed for screen element

Hi Experts
I tried to open VBFA in se16 and i got the message in the status bar like this , what does it mean. please explain.
"ABAP Dictionary type FLTP is not allowed for screen element"

Hi,
This is from help
ABAP Dictionary type FLTP is not allowed for screen element
Message no. 37048
Diagnosis
The format of the ABAP Dictionary field is only for use within the ABAP
program and cannot be used in the Screen Painter.
Procedure
The field cannot be used in screens. If you want to output the
information in the field or assign a value to the field from the screen,
you must use an intermediate field with an appropriate format.
Reward points
Regards

BAPI CASESERVICE CREATEMULT - Alternative price not allowed for the service

Similar Messages

Maybe you are looking for