BAPI communication between ECC & EP

Hi all,
We have ERP 6.0 and we are trying to use BAPI to commuicate between ECC and EP using iviews.
We have configured the connections, user managment in content adminsitration , we are getting the all the BAPI FM info from ECC during building the new iview, but when we try to preview the iview by giving the input to thr FM only the structure is coming data is not coming.
We have tested the FM from SE37 and able to get the dataset.
Please suggest me if any configuration to be done.
Thanks,
Subhash.G

Hi ,
Problem is solved, while giving input in iview we have to give exact details like for customer number it stores like 0000000001, if we give only 1 it's won't interpet as it was in Data dictionary... but while testing in sm37 you can give as 1 for customer number.
Thanks,
Subhash

Similar Messages

Best communication between ECC and PI

Hi All
SAP is planning to adapt Enterprise Service Architecture (ESA) in the journey towards Service Oriented Architecture (SOA).
We are working on new implementation project. We have many asynchrounous scenarios. We would like to configure acknowledgements and also like to handle errors effectively.
Could you please suggest which communication between ECC and PI is preferrable?
(Webservices, IDoc, BAPI or RFC)
Thanks
Sai

IDoc, BAPI , rfc - all can be used for seamless communication between ECC and PI. It is totallu dependant on the application and way information is exchanged. For master and transactional data idoc are prefered as for the acknowledgements supported by it. Not sure how effeciently we can handle system and appl ack incase of bapi/rfc. but at the same time idoc will be a drawback for sync comunication where rfc/bapi is preferd. It is SOA or ESA the concepts build in SAP are targeted to serve the enterprise needs where idoc,bapi/rfc are used for servicing the business unit objectives

Communication between ECC and CRM

Hello,
I am in phase of showing communication between SAP CRM 5.0 and ECC 6.0.
I am struggling with finding some simple transactions which are common in both, with which I can show correct connectivity between ECC and CRM.
I need to save some data from CRM and access the same via transaction within ECC, save some data via ECC and access it via CRM. I already established RFC link between ECC and CRM.
Probably communication between SD module of ECC with CRM.
Can you please help me out with this, a clue/correct direction will be of very helpful. Basically I want to know, what transaction I can use for same.
Any help is really appreciated.
Thanks
-Vishal

Hi Glenn,
I followed all steps in document mentioned above. In the end during execution of transaction I selected appropriate source and destination, when I click start transfer objects, it gets stuck in waiting phase.
Among those steps I was not able to perform step#10. Creating Subscriptions for OLTP. My ERP is not displaying this option under subscription wizard. Should it be reason for not starting transfer ? I also do not see ERP logon screen when I select transfer.
My another question is when transfer will complete, where I'll be able to see transferred objects within ERP database ?
Thanks
-Vishal

Communication between ECC and SCM via XI

I am trying to set up the scenario 'Purchase_Order_Processing' between
ECC and SCM using XI. The SCM content for XI has been loaded into XI
and this scenario is included in the content.
We are running the following:
ECC - Version 5.0 - 640 SP level 12
XI - Version 3.0 - 640 SP Level 14
SCM - 4.10 - 640 SP Level 12
The connectivity between the systems has been set up as described in the configuration guides. On sending an IDOC (basic type ORDERS05) into XI I get the following error message 'Http server code 500 reason Internal Server Errorexplanation Error during parsing of SOAP header'.
The Error XML is as follows:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Http server code 500 reason Internal Server Error
explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any assistance would be much appreciated.

Sravya,
Yes this an IDOC to http scenario. There was no dump at the receiver end. I've found out what was causing the problem - I was using an adapter type of HTTP. It should have been of type 'XI'. I've altered this and it works. Hopefully this will resolve your problem Vinod.
Richard

Issue in RFC communication between ECC and PI

Hi Experts,
We are upgrading our systems from SAP R/3 to SAP ECC. We have couple of synchronous interfaces between SAP ECC <-> SAP PI <->Webservices.
In R/3 these interfaces are working as expected and passing the data in correct format to PI. But same RFC in ECC is not passing correct data to SAP PI.
Our design is : ECC creates an IDOC and then from the port program it calls the RFC to send data to PI. I tried debugging this port program and until the RFC data is correct in the tables, but as soon as RFC hands over data to PI, data is getting messed up.
Below is the example.
Data in RFC : has data like this
TES_TRANS_NO MATERIAL UNIT QUANTITY SHIP_DATE
1003 MMT-XXX EA 1 20140722
But when data comes to PI it is something like this:
<?xml version="1.0" encoding="UTF-8" ?>
- <rfc:ZIDXF_WS_ORDER_STATUS xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
<ORDER>1003</ORDER>
- <ITEM>
- <item>
<TES_TRANS_NO>1003</TES_TRANS_NO>
<MATERIAL>EA 1 20140722</MATERIAL>
<UNIT_MEASURE />
<QUANTITY />
<SHIP_DATE />
</item>
</ITEM>
</rfc:ZIDXF_WS_ORDER_STATUS>
Material number is not being mapped and all other remaining fields are being concatenated somehow and being mapped to Material.
Please help if anyone has any ideas.
Thanks,
Sameer

Issue resolved:
RFC Destination was Non-Unicode in R/3, for ECC we changed it to Unicode (As PI system is unicode), and it worked.
Thanks everyone.
Sameer

Steps involved in setting up communication between CRM and R3 / ECC

Hi all,
Can you please tell what are the steps involved in setting up communication between CRM and R3 or ECC.
I know that initially logical systems, RFC connections and other technical settings need to be done by Basis consultants.
From a functional consultants viewpoint, what all config settings need to be done so that data transfer between the systems can take place?
Thanks in advance.

Hi,
There are a series of steps that are to be done...
These include creating sites and subscription in CRM, setting up filters, and number ranges....
All these are in the connectivity guide C71 and replication guide B09.
Refer C71 first and then B09. These would suffice.
You can get these both in the follwoing reference:
http://help.sap.com/bp_crmv340/CRM_DE/index.htm
If you dont get, then gimme your email id, i shall forward these docs to you.
Kindly reward with points in case helpful
Sharif.

Communication between SCM ICH and ECC

Hi every one,
We are trying to implement SCM ICHin our landscape. Can any one explain me, what all the stuff needed to configurations communication between SCM ICH to ECC. How to do that also? As per knowledge I head PI(Process Integration) is involved in the communication, but I do not know what all the configurations I need to do for that. Please let what all is needed for that. Can anyone provide me rlated documents.
Regards
Jack

Hi
The Connectivity settings are fully explained for cross systems in the Best Business Practice documents from SAP:
[BBP Connectivity Guide|http://help.sap.com/bp_scmv250/BBLibrary/Documentation/B02_BB_ConfigGuide_EN_DE.doc]
and the Replication Best Practice document:
[BBP Replication|http://help.sap.com/bp_scmv250/BBLibrary/Documentation/B05_BB_ConfigGuide_EN_DE.doc]
Other ICH configuration can be found in the Supplier Collaboration Document:
[BBP Supplier Collaboration|http://help.sap.com/bp_scmv250/BBLibrary/Documentation/S34_BB_ConfigGuide_EN_DE.doc]
There really is a lot of good documentation in SAP's own systems without having to email stuff around ;o)
Regards
Ian

Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interfa

Hi
i am try do
Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interface
With The help of SDN Contribution
link----
( have look on it)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4943f2b7-0a01-0010-37af-faff35b2f08c
I am getting error in
Partner system as HTTPLOG and "Execute" to check the results
Error is -- Port could not be created
RFC destination HTTPLOG Not specified for system HTTPLOG
any 1 have any idea if plzzzzzzzz...........
Thank u
Ram

Hello .
we are also in process of implementing the same
could you share the knowledge pl?
1)is it a separate add on with ALE to saphr
or using ECC ??
2)can u share the configuration part ??
we are trying it on webas as addon 3.0 .

Communication between SAP and Webserver

Hi,
we customize the communication between our sap ecc system (module HR) and https-Server of ELENA (see sap note 1408879).
Between both server should be installed a proxy server. Is it possible to communicate from sap system (transaction sm59) over saprouter (as proxy server) to a https-server?
We have not found information in documentation of saprouter or in sap notes. Is there any notes and links relating on this?
Many thanks!
Regards
Helmut

I think SAP Web Dispatcher should be the right solution for you.

Short dump Error during VM container communication between ABAP and JAVA.

Hello All,
Can anybody please help with resolving the following issue:
Short dump is displayed, when I try to insert CRM product (type: material) in the document (opportunity). This CRM product was created in CRM directly.
When I try to insert ECC migrated material, everything works fine.
Here is the details of dump:
Short text
    Error during VM container communication between ABAP and JAVA
Information on where terminated
    Termination occurred in the ABAP program "SAPLPRC_INT" - in "GET_PRICING_PROCEDURE_INFO".
    The main program was "SAPMHTTP ". In the source code you have the termination point in line 100 of the (Include) program "LPRC_INTF35".
Thank you!

hi Willie,
     this is the dump, and i have used the t-code sm52 . the VMC is not active.
|Short Text                                                                                        |
|    Error during VM Container communication between ABAP and JAVA.                                |
|What happened?                                                                                    |
|    The current program had to be terminated because of an                                        |
|    error when installing the R/3 System.                                                         |
|    Error in the RFC layer.                                                                       |
|What can you do?                                                                                  |
|    Note which actions and entries caused the error to occur.                                     |
|                                                                                                  |
|    Consult your SAP administrator.                                                               |
|                                                                                                  |
|    Using transaction ST22 for ABAP dump analysis, you can view, manage,                          |
|    and retain termination messages for longer periods.                                           |
|Error analysis                                                                                    |
|    An error has occurred in the RFC layer during communication between                           |
|    JAVA and the ABAP stack. This prevents data from being passed correctly                       |
|    between the two stacks.                                                                       |
|                                                                                                  |
|    Message    = TH_VMC_SERV_NOT_ACTIVE                                                           |
|    Return code = -1007                                                                           |
|    Pointer    = "000007DD348F6138"                                                               |
|How to correct the error                                                                          |
|    Check whether the VMC is active on your application server. To do this,                       |
|    run transaction SM52. If the VMC is not active, contact your SAP                              |
|    administrator.                                                                                |
Regards
Charles

ALE & BAPI communication

Hello,
When coming to ALE is it preferable to have an intercompany ALE communication...I know its normally Intra company....?
SAme with BAPI is intercompany BAPI communication preferrable...?
What might be the issues...?
Can any one help...
Thanks..
LArry

Hello,
Whether ALE or BAPI , is not a question of intracompany or B2B, but whether you need a sychronous (BAPI) or asynchronous (ALE) communication.
E.g. : there is more than one SAP-System in your company. You want to transfer changes of material master data form one system to the other. If you would do it synchronous, nobody could change a material master if the connection between the two systems is broken ( or the other system is down ) . A bad idea.. . So, you would do it via ALE.
Other case: you build a list on system 1 and need to read some data from system 2. There you could act with a bapi.
Regards Wolfgang

Roles/profiles for IDoc exchange between ECC & PI

Hi guys,
I'm using a IDoc->PI->File scenario and otherwise and I need to set up a communication user between ECC and PI for this IDoc exchange, but I don't want to use sap_all. Can you please tell which roles/profile to assign so the IDoc exchange would work?
Thank you,
Olian

http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/content.htm
From Note: 837595
Authorization object S_RFC
Field name RFC_TYPE value FUGR
Field name RFC_NAME value EDIMEXT, SDTX
Field name ACTVT    value 16
Authorization object S_IDOCDEFT
Field name ACTVT   value 03
Field name EDI_CIM value ' '
Field name EDI_DOC value TXTRAW01
Field name EDI_TCD value WE30
Authorization object S_CTS_ADMI
Field name CTS_ADMFCT value TABL
Authorization object S_TABU_DIS
Field name ACTVT      value 03
Field name DICBERCLS value

ALE communication between standard and not standard Idoc

Hello people,
I am trying to set up the following scenario:
I have to distribute Master Data changes in Sales conditions from an SAP ECC 6.0 system to an SAP SCM 7.0.
For that I use the [Shared Master Data Tool (SMD tool)|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/78/217d6851ce11d189570000e829fbbd/frameset.htm] solution to use change pointers.
I use the message type COND_A which is standard in the ECC system but it does not exist in the SCM system. Therefore the communication between systems cannot be achieved without enhancements or definition of another message type (i.e. ZCOND_A).
Everything will need to be created in SCM: the message type ZCOND_A, the Idoc type ZCOND_A02, the segments ...
Solution 1. To build a custom message type ZCOND_A, Idoc type ZCOND_A02 and segments that exist in both systems.
Solution 2. To reuse the message type, Idoc type and segments in ECC and convert it to the message type, Idoc type and segments in SCM.
- 2A do the conversion in the sender. SAP ECC.
- 2B do the conversion in the receiver. SAP SCM.
Which would be the best solution?
Could you tell me where to do the conversions?
Many thanks,
G.

Addition to my above submission
To clarify, I'll offer the US$20 to the FIRST person who offers me a workable solution to the problem, not to everyone!!!
JMGRAHAM

Communication between CRM and ERP for E-commerce scenario

Question more on lines of system architecture design.
We are planning to implement CRM E-commerce and wanted to find out more detail about the communication between CRM and ERP systems. Do they need to communicate in real time for this application, or is it mainly initial and delta loads? Is the amount of data exchanged huge ( necessitating both systems to be on the same network, or can they be on separate geographical locations )?
We also understand that E-commerce can also be done only using ERP. How does that differ from the CRM version?

Hey Sanket,
Q 1 . Do CRM and ECC need to communicate in real time for Ecommerce application, or is it mainly initial and delta loads
Ans. CRM and ECC communicate using RFC connections which further uses TCP/IP as the protocol.The communication can be both real time { delta loads} or offline {initial download}.
Q2 .Is the amount of data exchanged huge ( necessitating both systems to be on the same network, or can they be on separate geographical locations )?
Ans. The amount of data can be huge hence its preferable that both systems to be on the same network.
Q 3. We also understand that E-commerce can also be done only using ERP. How does that differ from the CRM version
Ans.Theres no difference functionally but technically the application connects to the ECC system using JCO to execute all the RFC enabled function modules.
Warm Regards,
Sumit

Is in PI7.1 possible asynchronous communication between SOAP and ABAPProxy?

Hi,
when method execute_asynchronous has disapeared since XI/PI 7.1, is
there still way how to use ABAP proxy in asynchronous way?
We need to build asynchronous connection SOAP->PI->ABAP_Proxy.
In PI, both interfaces are defined as asynchronous (outbound for SOAP and
inbound for ABAP Proxy).
Despite of this fact, when message is sent, it is processed
synchronous way.
I have set breakpoint in my implementation of method for ABAP Proxy
message processing. When message is sent and breakpoint is reached,
whole connection stays open (between SOAP and PI and between PI and
ABAP Proxy) and waits for processing method (the breakpointed one) to
return. Only when processing method returns, is connection finelly
closed.
If i understand it correctly, this is synchronous behavior. In
asynchronous behavior, as i understand it, should be connection
between PI and ABAP Proxy of application server closed immediately
after message has been delivered. This mean before my processing
method is even called.
The same could be said about SOAP and PI communication. Connection
should be closed immediately after PI has received message. From
definition of asynchronous communication of PI is obvious, that PI
should receive message correctly and close connection to sender system
even when receiver is unreachable. It should deliver message later
when, receiver system is back on line. So why it keeps connection to
sender system open while it waits for receiver?
Why is this happening, when both interfaces are defined as
asynchronous? Could be the reason for this, if APPLICATION
ACKNOWLEDGEMENT is set on by default? If so, how can i change it
to SYSTEM ACKNOWLEDGEMENT, or disable it at all?
Or is this kind of asynchronous communication even possible since
XI/PI 7.1 ?
Processing of message we are sending can take some time, so we dont
want connection pending open while waiting for finish of
processing. Thats the reason why we have chose asynchronous model to
use.

Quote from How to Use the J2EE SOAP Adapter:
"If you select Best Effort, the Web service client will receive a response
message in the SOAP body. Otherwise, the Web service client will not receive a
response message if no error occurs."
"if no error occurs" - that is the problem. In either case he still
waits if some error occure or not. I dont want it. Once PI has
received message, I want the connection with sender to be closed. If
there will be error in communication between PI and reciever, I want
to see it only in PI log. That mean no notification to sender to be
send about that error.
Is that possible?

BAPI communication between ECC & EP

Similar Messages

Maybe you are looking for