BAPI_CONTRACT_CREATEFROMDATA not defined for sales org distr channel langu
I am using BAPI_CONTRACT_CREATEFROMDATA to create a contract. If I use a material other than a product, I get no error. If I used a product type material< I get an error statign that the material is not defined in sales organisation dirtibution channel langu EN (I have checked the material and it does contain text.
Any ideas what the problem is?
Thanks,
Leanne
material is not extended to the sales org, etc., (see table MVKE) or you're supplying wrong combination of VKORG, VTWEG, SPART values.
Similar Messages
-
Material not defined for sales org
Hi,
when i try to select the item code in CUSTOMER-MATERIAL info. i cant able to get the item which created in MM01. and also getting the message .
"material not defined for sales org". can you help us how to resolve this one.
thanks
BalaThat means that particular material has either been created without extending the required sales views or material code has not been created.
Go to MM01, key in that material code, select all sales views and execute. Maintain the required sales area and save.
thanks
G. Lakshmipathi -
Sales document type is not defined for(sales org/division/distribution chan
Hi Friends,
I am getting the error that sales document type is not defined for x/y/z(sales organisation/division/distribution channel). while creating sales order.
Any pointers will be rewarded.
RegardsHi there,
When you define a sales doc type in VOV8, you also should assign that to the sales area SA (sales org / dist channel / division).
Only then you will be log a sales order for a sales area.
Check if you have done it. You will find it in SPRO --> Sales & Distribution --> Sales --> Sales doc header --> Assign sales doc type to SA.
Regards,
Sivanand -
Ship-to party not defined for sales area
Hi all,
I am really confused while creating a sales order, I need your help.
My sales org. - 1083, distribution channel - CY, Division - CW.
When I enter va01, in the initial screen I enter the above details. Then it goes to the create sales order screen where I enter my customer details.
After that, I enter my material number and quantity, it is giving me an error ship-to-party not defined for sales area 1084 CY and ZO ( other division) instead of 1084 CY and CW.
Where did I mess up ?
Thanks,
-ChandruHi,
Go to SPRO - SD - BASIC FUNCTIONS - PARTNER DETERMINATION Just check whther your partner function (SH) is assigned to your account group and also exists in the partner determination procedure.
Just try and maintain it there against your account group and against your sales document type in VOV8.
Also open your customer master for which you are trying to create this sales order. Just check whther in the partners tab , SH is shown? You can either use transaction BP or XD03.
Let me know, reward points if helpful.
Regards
Ravi -
Ship-to party 10106086 not defined for sales area 6000 40 30 error
HI gurus,
We have maintained cross divisions 00, we VR02 have maintanied the combined the divisions and we have maitned the division at MM01, we are getting VP210 error: Ship-to party 10106086 not defined for sales area 6000 40 30.
please help me in this we are unable to create a order.
this is urgent.Hi,
The error is Ship-to party 10106086 not defined for sales area 6000 40 30
Here system is considering distribution chan 40 & division 30
Go to VOR1 and maintain like as
Sales ogz - Distribution channel - Distribution for Condition - Distribution chn for CUST/MATERIAL
6000 - 40 - 40 - 00
Then in VOR2
Sales ogz - Division - division for Condition - division for CUST
6000 - 30 - 30 - 00
Then also check you have created customer for sales area 6000-00-00
Check in VOV8 go to details of your sales order type under general control tab Check division should be blank
OR
Remove division form material master basic data tab 1
Kapil -
Ship-to party 1600 not defined for sales area 1000 10 20
Hi Friends,
I am making inquiry(VA11).I am using a material and sales org.combination as (1000/10/00).
I have maintained the same sales org. for material also.i am using for example sold to party as 1600 and for this I checked in XD02 the combination of sales org is (1000/10/00).
But after hitting enter I am getting the errror as Ship-to party 1600 not defined for sales area 1000 10 20 but for 1600 customer ship to party is defined in (1000/10/00).
This error I am getting is quite unusual.(as I am using 1000/10/00 this combination exist for material and customer but why am I getting the error for 1000/10/20. ?).
Any pointer will be rewarded.
regardsin mm02 i have already changed the division as 00 but still getting error(looking quite strange)
same error I was getting earlier but got the solution after changing division in mm02 but not striking this time.
also in xd02 for sales org 1000 and div. 20 i maintained both reference division for condition and reference division for customer as 00 bot no result yet.
same error.
Any other inputs.
Regards
Edited by: Amit Kumar on Oct 29, 2008 8:39 AM -
Ship to party not defined for sales area x/y/z
Hi Friends,
While creating sales order I am getting following error---
Ship to party not defined for sales area x/y/z .Please help to overcome this problem.
xsales organisation ; ydistribution channel ; z--division
RegardsPlease go in Transaction XD01- Create Customer.
then in Account Group, Select Sold to Party.
Assign sales area , xsales organisation ; ydistribution channel ; z--division
and check.
Hope thiswill solve your problem -
BP not Valid for Sales Org - Web Client error
Hi,
We are currently upgrading from CRM 4.0 --> 2007. We have multiple Sales Organisations and different business roles. In the Web Clients we have a number of transactions. When we try and add additional users from other sales orgs to these activities/transactions we get the following error "BP not Valid for Sales Org".
In CRM 4.0 for the various Interaction Centers we never got this error. We were able to add additional users from other sales orgs to transactions.
Mt question is - How can we stop this error from occuring , so that we can add additional users from other sales orgs to these activities/transactions in the various Web Clients.
Any help on this would be greatly appreciated,
Thanks,
DanHi,
This error is appearing for the addition of employees. These employees are set up in the Org model for the relevant Sales Org's, yet the error still appears.
How would you go about adding employees,contacts etc from different Sales Org's to transactions (i.e attendees for an audit) in a Web Client that is set up to be Sales Org specific.
Regards,
Dan -
Web Client - BP not valid for Sales Org - CRM 2007
Hi,
In the Web Client (CRM 2007, for the Quick Create Activities it is not possible to add Business Partner's as Internal Assignees,Towards Awareness or Person's Responsible. There is an error message - "TEST1 is not Valid for Sales Org" -
This issue never occured previously with the "Web Interaction Centers" - CRM 4.0, when we added in Internal Assignee's , Towards Awareness BP's.
Any help on this would be greatly appreciated
Thanks
DanHi,
I suppose this is not the right forum for this issue...
Regards,
Wolfhard -
Error message: Ship-to party 1111 not defined for sales area 1000 01 50
Hi friends,
I created a new division 50 reference the one available. I maintained all the combination in sales area as far as I know.
When created SO, I got a error message saying " Ship-to party 1111 not defined for sales area 1000 01 50". Message No VP210
Please advise where I missed configuration.
Thanks,
Linda
Edited by: LindaSAP on May 25, 2010 5:40 PMHi,
Please check the below links
Ship-to party not defined for sales area
"SHIP TO PARTY NOT DEFINED FOR SALES AREA "
Ship to party is not defined for sales area..
Ship-to party not defined for sales area
Ship-to party 147 not defined for sales area US DS 20
ship to party -sales area error
Regards
Senya -
Ship-to party 147 not defined for sales area US DS 20
Hi,
I am getting following error while creating a sales orcer with ref to contract
Ship-to party 147 not defined for sales area US DS 20
Points will be rewarded for satisfactory answer.
Thanks & Regards,
VinayakHi,
After maintaining in US DS 20 it is working fine.
But normally we never maintain in US DS 20 for other transaction.
then why it is asking for this transaction.
we always create in US DS 10.
is their mistake while creating a BP or any SPRO changes required.
Thanks & Regards,
Vinayak -
IHi ,
In BD64, Under MATMAS Data filtration is set on Sales Org and Distribution Channel. When I am sending material from BD10 , I need to get these values ( Sale Org / Distribu Channel ). B'cos on the basis of these values I need to fetch PLANT from MVKE table by passing SOrg and Dchl .
I am reading Segment value in exit EXIT_SAPLMV01_002, but , these values are present at MVKE Segment but I need those values at MARC Segment and MVKE Segment trigger at last where MARC segment trigger initially , So I am not able capture values in Segment also.
On the basis on MARC-MATERIAL & MVKE-PLANT , I need to fetch TRLT (Lead Time) from MARC.
How to retrieve Sale Org/ Dch either from Filtration Set at BD64 or from MVKE Segment that is triggering later then MARC Segemnt??
Regards
AnkeshHello Ankesh,
Modify MARC segment after MVKE is filled.
Please find the below sample code :-
Loop at IDOC_DATA into WA_ IDOC_DATA .
case wa_idoc_data-SEGNAM.
when 'E1MVKEM'
READ TABLE IDOC_DATA into WA_ido WITH KEY segname = E1MARCM
if sy-subrc = 0.
*write your logic here and modify idoc_data
endif.
endcase.
Endloop.
Thanks -
Product is not valid for Sales org and distribution chain
Hello friends,
When i am saving the trade promotions , i am getting error message
"Product XXXX is not valid for distribution chain XXXX, XXXX"
I have maintained sales organization and distribution channel in commpr01 under sales and distribution tab.
kindly help.
Regards,
SrinivasHi Srinivas,
the error is raised from the trade promotion CCA check - raised from method CL_CRM_MKTGS_PD_CCA_CHECK_HDLR~CHECK. There are the following checks performed:
* There are several checks to do based on the distribtion chain
* Execute the checks and identify which products fail which check
1. * Determine if the product passes the distribution chain check
2. * Determine if the product category 1 of the product assignment
* passes the product category check
3. * Determine if the product category 2 of the product assignment
* passes the product category check
4. * Determine if the product group of the product assignment
* passes the product group check
5. * Determine if the sales status of the product is set to blocked
You may also need to check the sales and distribution data of the product category or product group of the mentioned product, if this is assigned to any.
best regards,
Johannes -
SALES AREA IS NOT DEFINED FOR CUSTOMERS
dear All,
1.I got this error while creating Sales Order,
"Ship to Party x is not defined for Sales Area".
2. while creating Customer Master I got the following error.
"Sales Area xxxx 10 20 is not defined for customers,"
Can any body send soln ASAP.
Thanks and Regards
RAMSHi,
i think u have done this
Define Sales Area
SPRO
Enterprise Structure
Definition
Sales and Distribution
Maintain Sales Office
Go to New entries and define the sales office
Go to Address Icon and maintain the details and save it.
Now Maintainain Common distribution channel and common division. common distribution channel and division helps in sharing maste data effectively. Assure you have 10 sales areas. it will b painful process to define a customer at all these areas. instead, it will be wise to create a common distribution channe and division. this can be used as a ref dchnl and divn fo other dchnl and divns. then the master data can be effectivel shared
Go to Spro: Sales and distribution: Master Data : Define common division and disrtibution channel.
Hope this will help you.
Reward ?Point if helpful.
Thanks,
Raja -
Combine sales org. dist channel & division
Dear Gurus,
What is the use of combine sales org, combine dist channel, combine division?
We assign sales doc type to sales area not to individually sales org, dist channel & division?
I cud nt understand sales org with ref 2 sales org, dist chnl with ref 2 dist chnl & with division also?
Wt is the logic behind that? Kindly give logical answer?
Regards
RakeshDear Rakesh,
As GSL rightly mentioned that the use of Combine sales org. dist channel & division in addition to that,
I can say in one sentence what is the logic behind Combine sales org. dist channel & division.
"To share the sales document types to all sales areas"
It is like common divisions and distribution channel through this we can share the master data for all slaes areas which is maintained in one sales area.
But in Combine sales org. dist channel & division we share document types to all sales areas which are assigned to single sales area.
I hope this will help you,
Regards,
Murali.
Maybe you are looking for
-
I can't get Itunes to work with windows 8.1
I saved my ITunes file from my old XP computer to my external hard drive. On my new Win 8.1 computer I downloaded the 64 bit version of Itunes. I changed the default location of the ITune file to my D(data) drive. My C drive is solid state and I did
-
I have my Kurzweil connected to my MacBook Pro via an adapter (old style MIDI from Kurzweil to USB adapter connecting to Mac). The Kurzweil has a baffling array of buttons and possible MIDI channels. Can anyone please tell me which of the channels I
-
Is there a wright answer?
Hi all Im very new to java.. Trying to run a programme in blue j editor and im getting the error "inentifer expected". any one know what that error means? Ill post the part of the programme with the error error line is in bold public static void sear
-
My Systems Preferences window is now a menu??????
I am accustomed to clicking the Systems Preferences icon on the dock and getting a window with things lined up in rows. Just recently when I click it, it will say "System Preferences, Edit, View, Window, Help" at the top of the screen, and the only w
-
Why do I have to sign in after screen lock and/or sleep?
I use Skype, YIM, Facebook, etc., and I want to stay signed in all the time. Whenever my ipod is awakened from sleep or brought out of screen lock, everything is signed out and has to sign back in. I miss calls and messages this way. I appreciate the