BAPI_Create_Bank, problems with returning message
HI getleman's!! I`m new in SAP (ABAP).
I`m using BAPI_Create_Bank and I realize that, when the data is commited rightly the message doesn't return anything.
althought when I'm trying to insert some replicate data the message of the Bapi return me and "E" Error.
I'm not sure if the message only return when it happened an error.
the options of the data element BAPIRET2 (message) shows:
Field: type
Description:
- Message type: S Success, E Error, W Warning, I Info, A Abort.
The 'S' has never been returned.
Thanks for your help.
regards.
Polak.-
Hi Hernan Szmajser ,
The return table parameter data population is based on the code inside the BAPI. for this BAPI the Return parameter is getting populated only for the error situation . If you look into the function module / BAPI they are calling a form routine "bank_distribute" in include L1011F01
Inside this include they are populating the return table only if the SY-SUBRC NE 0.
Check this piece of code inside the form routine:
Distribution of Bank*
CALL FUNCTION 'ALE_BANK_SAVEREPLICA'
EXPORTING
bankctry = bankcountry
bankkey = bankkey
bankaddress = bank_address
bankdetail = bank_detail
SERIAL_ID = '0'*
TABLES
receivers = receivers
COMMUNICATION_DOCUMENTS =*
APPLICATION_OBJECTS =*
EXCEPTIONS
error_creating_idocs = 1
OTHERS = 2.
IF sy-subrc <> 0.
PERFORM set_return_message USING sy-msgty sy-msgid sy-msgno
sy-msgv1 sy-msgv2
sy-msgv3 sy-msgv4
CHANGING return.
ENDIF.
Hope it helps.
Thanks,
Greetson
Similar Messages
-
I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account. -
Problem with Nokia Messaging on my N97 (V22)
Since afew weeks I have a strange problem with Nokia Messaging on my N97.
I receive emails using Nokia Messaging (V10.2.26) with a date shown incorrect as 01.01.0000 and the email then can’t be opened/read.
This happens either on 3G connection as well as WLAN and it seems to be by random, not only HTML-emails or emails with text only.
I have uninstalled Nokia messaging already and reinstalled V10.1.24 but the problem still remains.
Is there any idea how to fix this issue because it is quite annoying and I can’t use the full functionality of my cell phone?millic wrote:
ceroberts75, I remember from your other posts somehow server thinks you already have an account with the email you are trying to configure and you/nokia support is not able to get access to it. Different people have resolved this issue in different ways. For me it was just another way. Thought it might help someone.
absolutely m8. thats why i gave you a kudos.
the challenge is that NM has been unruly as of late...and believe when i say that i have literally been on the phone teching nokias support up to tier 2 and creating, canceling, trying new acounts with different email, different ways of creating them, with wifi, gprs...and praying for hours accross mutliple phone calls
but to no avail, are the devices we are using connecting and syncing...even with thier n900 specialist which i had to help him! lmao.
another option for a solution is alwayhs welcome as there are more then one way to skin a cat.
i hope it works for him and others as i kno9w thesome that are just giving up on it. -
Problem with instant message in clustered environment
Hello, I have some problem with Instant Message service.
We need to use it in our Production Environment (a clustered emvironment with a central instance, two dialog instances and two web dispatchers), some months ago we tested it in Development Environment (not clustered emvironment, just a single system) and it worked fine.
So I did the same configurations on Production Environment but it did not work.
But if I access on my portal (Production Env.) by the central instance (avoiding the dispatchers) the instant message service works.
I think it can be a web dispatcher's configuration problem, in its logs I found the message :
"<i>[Thr 3700] *** ERROR => htmlEncode: called with empty string [icpif.cpp 847]</i>"
I' ve repeated the same configuration done in Dev.Env. (no dispatcher) on the Prod.Env. (with 2 dispatcher), is possible that I'm missing some configurations??
Could someone helps me?
Best Regard
nullHi Alessandro,
unfortunately I got the same problem but I haven't found the solution yet.
Hoping someone will help us.
Regards Nicola -
Issue about BI JAVA SDK-SOAP request failed with return message 2147483653
Dear Experts,
I'm trying to use BI JAVA SDK to connect BW by using XMLA connector.
But there's an error messaet said :
SOAP request failed with return message 2147483653 ( Invalid MDX command with INCLUDING)
I'm really new to this JAVA SDK, and after searching help in SAP Service Market and Google, there's no helpful suggestion.
please help me about how to fix this error.
Here is my code:
IBIConnection connection = (IBIConnection) cf.getConnectionEx(cs);
IBIOlap olap = connection.getOlap();
Cube cube = olap.getObjectFinder().
findCubeFirst((String)null, "ZFI_C11/ZFI_C11_Q001");
// This is just a sanity check to verify that the
// cube on which this example relies was retrieved
if (cube==null){
System.out.println("no cube found");
// Didn't print out this message, seems it can connect to BW and get the InfoCube and Query.
Dimension plantDimension = olap.getObjectFinder().
findDimensionFirst(cube, "ZPLANT");
Dimension materialDimension = olap.getObjectFinder().
findDimensionFirst(cube, "ZMATERIAL");
IBIQuery query = olap.createQuery(cube);
IBICommandProcessor commandProcessor = query.getCommandProcessor();
commandProcessor.moveDimensionToRows(plantDimension);
commandProcessor.moveDimensionToRows(materialDimension);
IBIDataSet dataset = query.execute(); // After execute this statement, error happens.
Thank you!
AndySolved myself, it's because the query used in my code have user input variable.
-
SOAP request failed with return message 2147483653
Hello everybody!
I've got a constant error while trying to execute following MDX-statement via BI Java SDK:
SELECT {[0BCS_REPMOD].[N],[0BCS_REPMOD].[P],[0BCS_REPMOD].[R],[0BCS_REPMOD].[S]} DIMENSION PROPERTIES MEMBER_UNIQUE_NAME, MEMBER_CAPTION, PARENT_UNIQUE_NAME on 0 , {[0PCOMPANY].[000001],[0PCOMPANY].[000002],[0PCOMPANY].[000102],[0PCOMPANY].[000103],[0PCOMPANY].[000104],[0PCOMPANY].[000200],[0PCOMPANY].[000003],[0PCOMPANY].[000004],[0PCOMPANY].[000100],[0PCOMPANY].[000101],[0PCOMPANY].[000105]} DIMENSION PROPERTIES MEMBER_UNIQUE_NAME, MEMBER_CAPTION, PARENT_UNIQUE_NAME on 1 FROM [$ZBCS_OV12]WHERE{[0BCS_REPMOD].[N],[0BCS_REPMOD].[P],[0BCS_REPMOD].[R],[0BCS_REPMOD].[S]}{[0PCOMPANY].[000001],[0PCOMPANY].[000002],[0PCOMPANY].[000102],[0PCOMPANY].[000103],[0PCOMPANY].[000104],[0PCOMPANY].[000200],[0PCOMPANY].[000003],[0PCOMPANY].[000004],[0PCOMPANY].[000100],[0PCOMPANY].[000101],[0PCOMPANY].[000105]}*
The error is:
SOAP request failed with return message 2147483653 (Log not found (in main memory))
What to do with this message? How to understand what is the cause of the error?
The same query is working fine in MDX-test tool.
WBR, Dmitriy.Solved myself, it's because the query used in my code have user input variable.
-
when i attempt to open Firefox Mail, I get a popup (yellow background) with the heading "There is a problem with this message". We are sorry, but Yahoo Mail has encountered a temporary problem, referring to Temporary Error 4. It goes on to suggest that I might solve the problem by going to Yahoo Help Page. I tried this to no avail. Can you help? Please keep it simple as I am sort of computer impaired. Thanks, Bob Mayfield
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
*https://support.mozilla.org/kb/clear-cache-history-and-personal-information -
I keep having the same problem with my messages over and over again. My number is not checked in my message settings it just unchecks itself
Dear Tomarshe
I had the same problem a couple of weeks back.
What I did was that I restarted that Ipad of mine and voila!
Problem solved!
hope this helped!
- DASHdotDASHdot -
Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?
Not sure if this is a fix, but I tried sending myself a test email from only the Bcc field, and lo and behold it now shows the Bcc field in all sent item previews;
...maybe leaving the 'To' field blank on purpose forced Mail to show it.
Rebooted the Mail program, still there - rebooted the machine, still there. Hope this is still relevant and it works for you too - J. -
Having problems with a message saying,A script in this movie is causing adobe flash player to run slowly if it continues to run, your computer may become unresponsive. Do you want to abort script. And my system seems to freeze. What can I do
Here is the download page for Click-to-PlugIn:
http://hoyois.github.com/safariextensions/clicktoplugin/ -
WLS 7.0 sp2 - Servlet Problems with SOAP messages
I'm using Weblogic 7.0 SP2 and trying to create a Servlet to receive SOAP wrapped
XML messages. I'm getting the following error. Is this a problem with WLS7.0sp2's
support of JAXM? The System.out.println's indicate I have successfully received
the incoming SOAP request and then successfully formatted the SOAP response, but
upon returning saving the response it appears to blow up. Does anyone have any
suggestions?
I need to do the following in a servlet:
- receive an incoming SOAP request with an embedded XML message
- perform some processing
- return a SOAP response with an embedded XML message
Should I be using JAXM? Or can I do this same task easily with JAX-RPC?
<Feb 24, 2004 4:10:42 PM AST> <Error> <HTTP> <101017> <[ServletContext(id=260434
7,name=isd.war,context-path=)] Root cause of ServletException
java.lang.Error: NYI
at weblogic.webservice.core.soap.SOAPMessageImpl.saveRequired(SOAPMessag
eImpl.java:360)
at javax.xml.messaging.JAXMServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.run(WebAppServletContext.java:5445)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
eManager.java:780)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:3105)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2588)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
>
I've stripped the code down so that all it does is verifies the incoming SOAP/XML
request and creates a hard-coded response... be gentle... I'm a novice at this
import javax.xml.soap.*;
import javax.servlet.*;
import javax.servlet.http.*;
// import javax.xml.transform.*;
import java.util.*;
import java.io.*;
public class RegisterServlet extends HttpServlet
static MessageFactory fac = null;
static
try
fac = MessageFactory.newInstance();
catch (Exception ex)
ex.printStackTrace();
public void init(ServletConfig servletConfig) throws ServletException
super.init(servletConfig);
public void doPost(HttpServletRequest req, HttpServletResponse resp) throws ServletException,
IOException
try
System.out.println("** Note: doPost() Entering req = " + req);
// Get all the headers from the HTTP request
MimeHeaders headers = getHeaders(req);
// Get the body of the HTTP request
InputStream is = req.getInputStream();
// Now internalize the contents of a HTTP request
// and create a SOAPMessage
SOAPMessage msg = fac.createMessage(headers, is);
System.out.println("** Note: doPost() Step A");
SOAPMessage reply = null;
reply = onMessage(msg);
System.out.println("** Note: doPost() Step B reply = " + reply);
if (reply != null)
* Need to call saveChanges because we're
* going to use the MimeHeaders to set HTTP
* response information. These MimeHeaders
* are generated as part of the save.
if (reply.saveRequired())
System.out.println("** Note: doPost() Step C reply.saveRequired()");
reply.saveChanges();
resp.setStatus(HttpServletResponse.SC_OK);
putHeaders(reply.getMimeHeaders(), resp);
// Write out the message on the response stream
OutputStream os = resp.getOutputStream();
System.out.println("** Note: doPost() Step D os = " + os);
reply.writeTo(os);
os.flush();
else
resp.setStatus(HttpServletResponse.SC_NO_CONTENT);
catch (Exception ex)
throw new ServletException("** Error: SAAJ POST failed: " + ex.getMessage());
static MimeHeaders getHeaders(HttpServletRequest req)
Enumeration enum = req.getHeaderNames();
MimeHeaders headers = new MimeHeaders();
while (enum.hasMoreElements())
String headerName = (String)enum.nextElement();
String headerValue = req.getHeader(headerName);
StringTokenizer values =
new StringTokenizer(headerValue, ",");
while (values.hasMoreTokens())
headers.addHeader(headerName,
values.nextToken().trim());
return headers;
static void putHeaders(MimeHeaders headers, HttpServletResponse res)
Iterator it = headers.getAllHeaders();
while (it.hasNext())
MimeHeader header = (MimeHeader)it.next();
String[] values = headers.getHeader(header.getName());
if (values.length == 1)
res.setHeader(header.getName(),
header.getValue());
else
StringBuffer concat = new StringBuffer();
int i = 0;
while (i < values.length)
if (i != 0)
concat.append(',');
concat.append(values[i++]);
res.setHeader(header.getName(), concat.toString());
// This is the application code for handling the message.
public SOAPMessage onMessage(SOAPMessage message)
SOAPMessage replymsg = null;
try
System.out.println("** Note: OnMessage() Entering msg = " + message);
//Extract the ComputerPart element from request message and add to reply SOAP
message.
SOAPEnvelope reqse = message.getSOAPPart().getEnvelope();
SOAPBody reqsb = reqse.getBody();
//System.out.println("** Note: OnMessage() Step B");
System.out.println("** Note: OnMessage () Step A Soap Request Message Body = "
+ reqsb);
//Create a reply mesage from the msgFactory of JAXMServlet
System.out.println("** Note: OnMessage () Step B");
replymsg = fac.createMessage();
SOAPPart sp = replymsg.getSOAPPart();
SOAPEnvelope se = sp.getEnvelope();
SOAPBody sb = se.getBody();
System.out.println("** Note: OnMessage () Step C Soap Reply Before Message Body
= " + sb);
se.getBody().addBodyElement(se.createName("RegisterResponse")).addChildElement(se.createName("ErrorCode")).addTextNode("000");
System.out.println("** Note: OnMessage () Step D Soap Reply After Message Body
= " + sb);
replymsg.saveChanges();
System.out.println("** Note: OnMessage() Exiting replymsg = " + (replymsg));
catch (Exception ex)
ex.printStackTrace();
return replymsg;
Michael,
I got the same error on WLS8.1/Win2K professional and apache FOP (old version).
After digging into the WLS code and FOP(old version). i found the conflict happens
on
the "org.xml.sax.parser" system property. In WLS code, they hard coded like the
following when startup weblogic server:
System.setProperty("org.xml.sax.parser", "weblogic.xml.jaxp.RegistryParser");
But the FOP code try to use the "org.xml.sax.parser" system property to find the
sax parser then conlict happens.
Here is the response from BEA support :
"I consulted with our developers regarding the question of whether we can change
the hard-coded value for the java system property: org.xml.sax.parser by using
a configuration parameter and I found that unfortunately there is no specific
setting to change the value. As you had mentioned in your note the org.xml.sax.parser
system property can be changed programmatically in your application code."
I solve my problem by using newer apache FOP (it never use the system property:org.xml.sax.parser
any more) and XML Registy for WLS8.1.
Good luck.
David Liu
Point2 Technologies Inc.
"p_michael" <[email protected]> wrote:
>
Help.
When we migrated from WLS 6.1 to WLS 7.0 SP2 when encountered a problem
with XML
parsing that did not previously exist.
We get the error "weblogic.xml.jaxp.RegistryParser is not a SAX driver".
What does this mean? And, what should we do about it.
p_michael -
A problem with return order with free goods
Hello
I am working on ECC 6.0
I am facing a problem with the return order the case is I created an order of 1000 pc with inclusive free goods (w/o item generation) condition record that for every 10 pc over the 100 the customer will take 1 free pc
1 pc = 10 $
100 pcs = 900 $
120 = 1080 $
the problem when I am creating a return order with 30 pcs the system calculate the price as if there are free goods the system returns the 30 pcs with 270 $ instead of 180 $ and it should not calculate the free goods because the remaining items are 90 pcs that should not take a free goods discount
Regards
Jacopo Francioshi ,
Such scenerios can be tackled by different pricing procedure in return scenerio.
See Pricing procedure Depends on sales area + customer pricing procedure + Document pricing procedure .
So for Return document type please maintain different pricing than the normal scenerio this will solve ur problem.
This is generally done also for tackling such scenerios.
Thanks & Regards -
PROBLEM with iMessage (Messages) on iPod touch HELPPP
We had a problem with iMessage. We're both using iPod touch with iOS5 version.
but we can't send messages. It says our emails/apple ids are not registered on iMessage.
I checked it on already on the Settings>iMessage> ON .
but still we cant use it. HELP PLEASE THANKSSame isue when tryn to change advanced setting :
+Mon Jul 5 15:51:39 iPhone profiled[266] <Warning>: profiled|Service starting...+
+Mon Jul 5 15:51:39 iPhone profiled[266] <Warning>: MC|Profile MCConfigurationProfile 0x113b30 has no friendly name.+
+Mon Jul 5 15:51:41 iPhone ReportCrash[267] <Notice>: Formulating crash report for process profiled[266]+
+Mon Jul 5 15:51:42 iPhone com.apple.launchd[1] (com.apple.managedconfiguration.profiled[266]) <Warning>: (com.apple.managedconfiguration.profiled) Job appears to have crashed: Bus error+
+Mon Jul 5 15:51:42 iPhone ReportCrash[267] <Error>: Saved crashreport to /var/mobile/Library/Logs/CrashReporter/profiled2010-07-05-155139iPhone.plist using uid: 0 gid: 0, synthetic_euid: 501 egid: 0+
Did you solved this issue ?
Message was edited by: lbarbisan -
Problem with return true and if statement
I'm making a
ship shooter
game and I have a problem with the collision detection for the
corners of the stage. When you hold down two of the arrows to move
the ship into the corners of the screen, the ship will go past it.
The function bellow is what I'm using to detect this collision. The
reason I'm using a function is because it's used for the ship and
for all the balls from the cannons (as shown in the last two lines
of the attached code). This is the reason I need the return true,
so the if statement can be evaluated to true and then unload the
movieclip of the cannon ball. When I remove the return true, the
collision works fine, but obviously my cannon balls all get stuck
on the edges.
Any ideas?Well the function is called every frame, for the ship and for
every cannon ball that's on the screen. So it could be called about
4 times or so per frame. The problem is that ship goes through the
corners of the stage (btw, the green background is the stage area)
when you go in a diagonal direction.
Just curious...what's the unnecessary code you're talking
about? -
Hi,
I have a 5530 XpressMusic phone with around 4000+ text messages saved on the memory card.
Whenever the number of text messages increases above approximately 3500+ messages, the new text message alert stops appearing, no tone or vibration alerts. Even delivery reports refuse to appear.
Nokia PC Suite (Latest version) has a lot of trouble displaying those texts as well (So that I could backup the data) and nothing appears in Communication Center.
I had the exact same problem with the older N70 ME and had to delete texts to get back to normal. Its going to be very cumbersome to go through all those messages and pick and prune to a size that the phone/Suite can handle.
I have the latest firmware. Any help with this?ok this isn't any help sorry,but can't find anywhere to post a new thread,so this is the closest post i've found so hopefully i can get some help here :robotmad:
when i have "backed up" my messages from the phone to my memory card AND picked my memory card as the place where my messages are stored,i put the memory card into my pc to browse the memory card i cannot find anything on there relating to the back up or my messages,i've gone through all the folders i can see,even the empty ones(btw do i need keep the empty folders or can i delete them),now this is really "bugging" me as my little lad sent me a merry christmas text message so i wanted to do the above action so i could save the message on my pc as a keeps sake
hope you guys can help
thanx a lot
Maybe you are looking for
-
HT1399 Installed ITunes 11.1.0.126 now updating podcasts no longer works correctly.
I use ITunes for my subscribed podcasts. The daily podcasts I get comes in three separate podcasts for the whole show and gives me the option to download all shows that I have not downloaded in the past. Hour 1, 2 & 3 would update when I selected
-
Just upgraded my ip5 to a 6 when I restored my backup it didn't restore my photos. What do I do?
MMy photos did not restore on my ip6 when I upgraded from 5. My text messages and settings all downloaded.. What do I do?
-
Probelm with iPhoto and Photo Streams
I am having trouble viewing my iCloud photo streams on my Mac using iPhoto. in the iPhoto iCloud category i can view the stream named my photo stream but i have 2 other stream that are presented but without any photos. in my iPad + iPhone i can view
-
Firefox 64 bit (Firefox 64bit x64 3.6.3) On Windows 7 Download Site. Is this official?
I stumbled upon a 64bit FireFox download on Windows 7 download site - http://www.windows7download.com/win7-firefox-64bit-x64/tafschzm.html - Is this official? Because according to Mozilla's own download site, there's no schedule yet for a 64bit FireF
-
Hi all, In transaction KP06, when you go to period screen, there is a field Plan Fixed Costs. I need to get the value in this field. Anyone knows which table contain this data? Thanks in advance.