BAPI/FM for reconnection and stop disconnection process in SAP ISU/CCS

Hi,
If the disconnection has been carried out, then call the function module to start the reconnection process.
let me know if ther is a BAPI/FM to carry out reconnection /disconnection
Regards
Shiva

Hi Shiva,
I am not sure if my reply answers your query, however, just look at this simple step:
go to TCode EC85 and try for disconnection and reconnection.
Let me know, if that helps or if you are looking for something specific.
Amitav

Similar Messages

  • Vendor Master for Interviewees and expenses payment process in SAP

    Hello All,
    We are trying to figure out a process for people who come for Interviews and submit their expenses and get a cheque from our company. How can this be carried out in SAP..Please add your valuable inputs to the process below:
    Create Vendor master in SAP..( Which account group? Dodnt want to use primary account group. One time vendor account group does not have address fields maintained... )
    When the interviee submits his expenses..( Do we create a PO to pay ? Do we just create a Invoice MIRO ? Do FB60)
    Kindly Advice,
    Thanks

    hi,
    FB60-will be the best option for your requirement where you can book the expenses directly .In the short text you can maintain the candidate name and his expenses for the interview.
    Regards,
    velu

  • Measurement mark for start and stop interval

    I have added measurement mark as Start interval and Stop Interval and saving that in the Time interval measure as indicator for BAM in my BPM Process.
    This is to calculate the time it takes to finish some task. e.g.
    A. process is started
    B. Start Interval measurement mark is added and saved in measure BAM indicator
    C. some task takes places.
    D. Stop Interval measurement mark is added and saved in measure BAM indicator
    But, when I create the report, the measure indicator doesn't have any value.
    I think I am doing something wrong, but don't know what.
    Has any one done this or come across this situation.
    Thanks

    Dear sir,
    My application development steps are as follows:
    1. My application consists of three control buttons are Start, Stop & Exit
    2. Initially input parameters validation (Limits are assigned)
    3. If any value entered out of limit, it will show the error message and the start button will gray and disabled. The user should not start the application until entered values are valied.
    4. Internally some conversions and logics are implimented.
    5. Coming to Front panel (GUI) start button is green color and stop button is red color.
    6. The user entered the correct parameters and he started the appilication. After sometime he should know already application was started and he should not start again until he stops the appilcation.
    For this i need logic for start and stop buttons to implement in my application. Thats why i choosen the traffic light concept changing the colors vice versa (which button shows green he should press that perticular button).
    Please suggest me or provide any better option for start and stop buttons.
    Regards,
    S Nagaraju

  • BAPI functions for FB60 and F-02

    Hi,
        Can any one please tell me the BAPI functions for FB60 and F-02 tcodes.
        I had searched in forum,but din't solved my purpose.
    Thanks.
    Sri
    Moderator message - Search harder. Maybe Google will help - post locked
    Edited by: Rob Burbank on May 8, 2010 6:25 PM

    This has been solved for FB50. The original variant for FB50 had never beer created in our QAS system! So I was able to get the screen variant menu selections to reappear by running SHD0, editing, and then saving the transaction variant 'STANDARD 1' (not sure if that is SAP's name for the default variant).
    Hope others find this information useful.
    J. Haynes
    Denver, CO

  • Using the spacebar for starting and stopping a clip does not work

    Hi!
    The spacebar for starting and stopping the playing of a clip in the viewer of a sequence in the timeline has a live of its own. Without changing any setings, it sometimes works, but mostly not. Is there a seeting, I have not figured out yet? While in a session with Final Cut Express, it does not change its behavior. It starts with a working or not working spacebar. The same applies to the arrows to go back and for a frame, or back and for a clip. If the spacebar does not work, the arrows do not work either.

    thanks everybody. But my spacebar and arrow keys still do not work.
    As uggested, I deleted the preferences in the library (which is also what is suggested by fcpbook.com/Misc1.html)
    I am used working with Final Cut for some time now. And just got myself a new iMac and the program. So everything is quite new. I did not change any settings so far.
    The first 2 days everything was fine.
    Then, one day, the spacebar and the arrow key stopped working. Not in the middle of a session, but when I started the FCE new. Inbetween, it worked for some time. Now, the spacebar is gone again.
    It's just the function of playing the clip that does not work. In whatever window (timeline, viewer). The function of the spacebar to make a space (for example in te name of clip or in a text file) works fine.
    I would not mind the spacebar that much, but I miss the arrow keys to go from frame to frame, or from clip. It's strange.

  • I will be buying the new IMac 27 inch in December. Would like input on the best configuration for photographic and possibly video processing-dream machine!

    I will be buying an IMac 27 inch in December. What is the best configuration for photo and possibly video processing.Does one need a Mac Pro? Dream machine!

    Just to explain what I just wrote to Laundry Bleach:
    Why is there no iDVD on my new Mac?
    https://discussions.apple.com/docs/DOC-3673
    UPDATE & ADDENDUM:
    But even though you can still buy iLife 11 that includes iDVD 7 from Amazon, Apple now make it difficult to install:
    Poster jhb21939 posted this in another thread:
    “when I attempted to load iDVD into a new iMac. A notice came up on the screen stating that the 'Authorisation Licence' had expired on 25 March this year (2012).
    I contacted the Apple support team and eventually, I was told that the Licence had been withdrawn and could no longer be used.”
    In other words Apple are now so adamant that we don’t use iDVD that they have tried to make it impossible to install.
    In response, Old Toad posted this solution:
    “You can still use it one all of your Macs.  If you get an invalid certificate message just set your Mac's clock to sometime before early 2011 and run the installer.  After you're done reset the time back to the correct time.” He added this comment:
    “It began after iDVD and iWeb were discontued and they were dropped from the Apple Store. All I can think of is the certificate was set to expire after a certain time period after the intitial iLife disc was released.
    I've been able to use the installer even without setting back the date.  I just clicked on the Continue button and it would work as expected.  For some it would not continue unless the date was set back.”
    The latest anorexic iMacs just announced do not even include a CD drive! Proof positive that Apple virtually prohibit the use of DVDs - although the newly announced Mac Minis do include a Superdrive.
    Yet, they still include iMovie! Heaven alone knows or understands what you are supposed to do with your newly edited masterpiece - except make a low quality version for YouTube?

  • Scope and current market trend of SAP ISU

    Hi Experts,
    What is the scope and current market trend of SAP ISU?
    What all are the companies using SAP ISU?
    Regards,
    Dipin

    Not only for SD but for all modules, there is a boom in India and many IT companies are floating their requirement in market to grab the cream of consultants.
    thanks
    G. Lakshmipathi

  • Check GL(Bank) account balance for banks and stop payment if sufficient

    Hi Experts
    Requirement is to check GL account balance for bank account and check whether enough balance exists for effecting payments. In the absence of insufficient bank balance, payment should not be effected. Balance needs to be check either manual cheque payment or automatic payment program.
    Please provide best solution.
    Regards

    Hi,
    Requirement is very clear,
    this is critical requirement, normal situation nobady update values in Available amount every day in FBZP
    If you want to impliment this reqirement, discuss with technical person (ABAPer) to impliment BADI functionality.
    As a functional consultant you have to tell the technical person,
    1 - Create Z internal maintanance table. for house bank & Company code againest available amount.
    2 - During payment (FB01,F-53,F-48,F-58 & F110) system need to Compare table Vendor open Item (BSIK) and Z teble balances, if Z table balance is less than table (BSIK) value system stop the process else system process for payment.
    for better clarification discuss with technical expert.
    Regards,
    Viswa

  • UNDO Management - Config changes for OLTP and large background processes

    Hi,
    I am running 9i on a 2 node RAC cluster - Sun Solaris.
    I use Automatic Undo.
    The database is currently configured for OLTP and has 2 undo datafiles - 1GB in size and undo_retention set to default (900seconds)
    I am about to start scheduling a batch job to run each night that will delete approx 1 million records each time it runs.
    To get this to work without the dreaded Error -30036: ORA-30036: unable to extend segment by 8 in undo tablespace 'UNDO01', I have increased the undo datafiles to 5GB and the undo_retention to 4000.
    The question is do I need to worry about switching between these settings - using the smaller values for daytime OLTP and the nighttime settings for the heavy processing?
    What issues might I encounter if I just left the UNDO Management settings in place that I use for the large delete?

    I would say no, leave the settings the highest level required to accomplish the work of the instance. Once the setting are correct for the instance, you should not have to change them around. They are really max setting for the heaviest load on your instance.

  • Action Script 3 code not working for start and stop button?

    Ok so I have this simple animation I created of a circle that moves from one side of the stage to the other. I have added a new layer and called it buttons. On this layer I have added 2 buttons. One for start and another one for stop. The purpose is to get my circle to move from one side of the stage to the other but be able to use my buttons so that I can start and stop the animations at random times during playback. I fixed all my compiler errors now the problem lies in that everytime I click the start or the stop button I get an output error. I have a 3rd layer in which is titled actions and this is where all my code is posted. I removed that layer and placed my code in the first frame of the buttons layer to see if this would change anything but I still get the same output errors. So I just added back my actions layer. What could I be doing wrong? I have made sure to name all my movie clips and buttons correctly and I even added an instance name to them.
    Here is my code and the errors I am getting when I press the play and stop button on test-
    start_btn.addEventListener(MouseEvent.CLICK, startCircle);
    stop_btn.addEventListener(MouseEvent.CLICK, stopCircle);
    function startCircle(e:MouseEvent):void{
        circle.play();
    function stopCircle(e:MouseEvent):void{
        circle.stop();
    green_btn.addEventListener(MouseEvent.CLICK, greenCircle);
    red_btn.addEventListener(MouseEvent.CLICK, redCircle);
    function greenCircle(e:MouseEvent):void{
        circle.play();
    function redCircle(e:MouseEvent):void{
        circle.stop();
    Here are my output errors-
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
        at exercise2_fla::MainTimeline/redCircle()
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
        at exercise2_fla::MainTimeline/greenCircle()

    ok so my circle is my movie clip and it is titled circle and the instance name is circle. Am I supposed to change MovieClip to circle? I put the code at the top of my actions script but for some reason it did not work. I did change play to stop and it got the movie clip to stop when I do test movie but my buttons still do not work. So I changed stop back to play. Strange.
    I did try changing MovieClip to circle but that did not work so I did Circle with a capital C and that did me no good eigther.
    I meant to add that I did get an error that said- 1180 Call to a possibly undefined method circle.

  • Add-on  starting and stopping using Buttons In SAP BusinessOne

    Hi,
    I have a requirement that   Add-on should be  start and stop should  be done using Button.  When ever i click on Button add-on should start and  after click the button add-on should be stop...
    anyone  have any idea...
    Thanks,
    Y.

    Well... stopping it is no problem, you can stop the addon with a button. But starting it with a button? What is going to place this button in B1? And what is going to handle the event of the button being pressed to start the addon?
    This can't be done without creating another addon (or using an existing one) just to create the button and listen for its event. So it kind of defeats the purpose.
    But all users can have access to addon manager, why not just trigger it from there, where there already are Start and Stop buttons?

  • FICA -IDOC for posting the billing data from NON-SAP ISU system

    Hi,
    Kindly note we are implementing NON-SAP ISU with SAP FICA for the finance implementation. In this context, we ahve identified BAPI for BP and CA. We have decided to go for transaction posting through the transaction FPE1. For this, we are looking for the transaction data IDOC which is CTRACDOCUMENT_ACCOUNT (FICA Posting)  in the WEDI. But it seems that it is not yet released. Can anybody help me out for this to either identify the equivalent IDOC or other method to post the data from Banner system (NON-SAP ISU ) system. We are presently not implmenting billing system in SAP ISU, but only FI system

    Hi,
    you can create the same...
    but normal practice what we do is create swc for each system so that it is easy to maintain and easy to extend in the future..
    or else follow some conventions if you are just starting the things..
    HTH
    Rajesh

  • TechComm2: 9004 error for FM and 'stopped working' error for RH8

    I have been running the demo versions of FM9 and RH8 under Windows 7 for three weeks with no problems - for no apparent reason both apps stopped working this afternoon.
    'Internal Error 9004, 6919244, 9675646, 0. FrameMaker has detected a serious problem and must quit.' error at the Localization phase when launching FM.
    'Adobe RoboHelp 8 has stopped working' at the Loading Components phase when launching RoboHelp.
    I uninstalled and reinstalled the applications with no change.
    Any ideas?
    Coincidentally, I purchased and registered the TechCommSuite 2 upgrade this morning, about two hours before this mess started. I have a documentation and Online Help project due today - what a mess.

    Pieter,
    Simply navigate to c:\users\your name\AppData\Roaming\Adobe and rename the 'Linguistics' folder (Framemaker should NOT be running - otherwise, the folder will be write locked and unable to be modified). As a precaution against doing more damage to my installation I renamed the 'Linguistics' folder instead of deleting the folder (for example, Linguistics.bak). When Framemaker opened it automatically recreated the 'Linguistics' folder as well as the dictionaries, at which point I deleted 'Linguistics.bak'. Since then I have had no problems. By the way, I am running Windows 7; if you are running a pre-Vista version of the OS you will find your 'user' folder under c:\documents & settings. Good Luck.
    Thomas

  • SOLAR01 - BPR content for Oil and Gas - JVA processes

    Hello
    We are dealing with the creation of the structure (scenario, processes and steps) for a Oil and Gas project trying to use BPR.  In order to locate the right process we are dealing with Solution Composer, with configuration variants from the Oil and Gas Soluton Map.  We are not able to find any of those processes in the BPR.  We look any process with joint or venture words in it but there is none.  We have Solman 7.01, stack 25 and ST-ICO 150 level 27 (the latest available)
    Any suggestions?
    Regards
    Esteban Hartzstein

    Hi Vinay,
    This entirely a business and consulting decision. In general its good to have different templates for bulk fuels, Crudes, Packed lubes/Gas, and aviation. This still depends on the volume of business in a particular line.
    Regards,
    Ashutosh

  • Standard BAPI/RFC for create and create material

    Hi All,
    Can you please let me know what standard RFC/BAPIs can be used to create and change Material Master from Portal/ WebDynrpo for Java.
    Thanks,
    Vamshi

    BAPI_MATERIAL_SAVEDATA

Maybe you are looking for