Bapi fm or idoc strucher for tcode VA41

Hi,
Can any one help me...i want Bapi fm or idoc strucher for tcode VA41.
Sales Document Type
Sales Organization
Distribution Channel
Division
Sold-to-Party
Contract Start Date
Contact End Date
Material Number
Order Quantity
Sale Doucment Item
Sales Document
Sales Document Version Number
for this feilds i want the bapi.
Thanks ,
Ankitha.

Hi,
Try this Standard Idoc type....
BUS1505_CREATE01
Reward if helpful.
regards,
Syed

Similar Messages

  • Bapi fm or idoc strucher for tcode fch5

    Experts,
    Is there a BAPI/FM to create Check (Cheque) Information ??
    The Tcode for this is FCH5.
    Points will be rewarded handsomely.
    Thanks,
    Ankitha.

    hey
    check this BAPI may be useful for you
    BAPI_ACCSTMT_CREATEFROMBALANCE
    or
    BAPI_ACCSTMT_CREATEFROMPREVDAY Create Bank Statement/Day-End Statement
    BAPI_ACCSTMT_CREATEFROMSAMEDAY Create Bank Statement/Today's Data
    check EB_BANK_STATEMENT_INSERT
    ~~Guduri

  • IDOC Type for Tcode CC01 and CC02 (Create / Change Change Numbers)

    We are trying to integrate Change Master from a 3rd party system to SAP R/3 4.72.What is the IDOC Type for Tcode CC01 and CC02 (Create / Change Change Numbers)

    Thanks...
    We have looked at this IDOC Type. However we are not very sure how the components (Material/BOM etc.) will be mapped into E1AEEFM segment in the IDOC.

  • IDOC setting for tcode PB40 and applicant creation

    In tcode PB40 (a tcode of HR Module), when for example, Applicant Creation is done, an IDOC is triggered.
    We are encountering an error in the IDOC which is trigered when Applicant Creation is done because that IDOC is picking up a partner profile which is not correct.
    Please tell me where is the setting maintained which dictates the triggering of IDOC in tcodes like PB40 (so that i can debug why is it picking up a wrong partner profile)

    Hi,
    This output determination is done using NACE..
    For your scenario in We20 check the message type you are using and associated partner profile...there you need to configure the message control for generation of the idoc check whether this has been configured in different partner profile than required..
    Also check any distribution model associated for this data (Tcode :BD64)
    HTH
    Rajesh

  • Screen Enhancement for tcode VA41

    Hi,
    I have a requirement where I need to add few custom fields into tocde VA41.
    It ideally needs to sit in screen no 4021.
    I have go through all the user exits in SMOD and various posts in sdn, but it's not meeting my situation.
    Can we achieve this without having the need of access key?
    Regards,
    Zafar

    Hi
    For sales document it has the old concept of screen exit, so it can use 8309/8310 for header data or 8459/8460 for item data.
    You need to get the access key in order to use the screen-exit above, so that's valid if you want to change a standard screen like 4021.
    I don't think there's another chance
    Max

  • User Exits in RV45PFZA for TCODE VA41, VA42..

    Hi all,
    I need to write my own code in the 'USEREXIT_SET_STATUS_VBUK' in Include 'RV45PFZA'. I am not able to change the code as it is a Standard SAP code and it asks me the access key. Now The question is :
    1. Do I have to request for the Access Key to make this change?
    or
    2. Do I have to Create a Project in CMOD?? If I have to, then where will I find the Enhancement name or the Exit Name. I tried all the methods proposed in the earlier forums but have not been sucessful in finding the right exit.
    Have any of you worked on this or on something similar?? This is urgent. Your invaluable suggestions are greatly appreciated.
    Thanks in Advance,
    Raj.

    Ravi,
    Thank you for your suggestion. I got the Doubt cleared. I have one more question.
    In Include RV60AFZZ , I have added my code in
    FORM USEREXIT_PRICING_PREPARE_TKOMP to Deactivate Condition types for FPD process . I activated the code. Now  when I create a delivery doc (via Vf01), it gets created and saved if I do it in the fore ground, but it fails if I schedule it as Back ground job. Is this because the Include doesnt have the SAVE_DOC User exit.Please elaborate if you have any suggetsions as to why it is failing in the Background and what will be the other options to make it work in the Back ground.
    Again Thank you so much.
    Raj.

  • Idoc provision for tcode ksu1

    Hi all,
    can anyone let me know is thre any provision to initiate transaction KSU1 through an idoc .
    Thanks,
    Roby.

    Thanks...
    We have looked at this IDOC Type. However we are not very sure how the components (Material/BOM etc.) will be mapped into E1AEEFM segment in the IDOC.

  • IDOC FOR TCODE F110

    Hi GURUs,
    1. I want to know whether there is any  IDOC  availlable for TCODE : F110 (payment run).
    2. After payment run i want to download the file in text format ,so is there any way to download the file by using IDOC.
    Thanks for your help.

    For this take the ABAPer help.
    1st: For 1st payment method, create one BDC program with all details and the parameters will be constant except the "Run date" and "Next payment date". In TCODE:SM36, you can schedule job at specific time. In that job give this BDC program name.
    Once you do the payment run system automatically, clears the Vendors
    Data to Bank server is possible using the IDoc - ( take the help of ABAPer in developing this IDoc) using the Automatic Job scheduling the IDoc, you can maintain this after completion of the above job. Before to this get the data to be sent to the Bank Server in a template format with SAP field mapping.
    2nd: As this payment method requires the authorisation, you can go by manual execution of the IDoc , instead of the Automantic job scheduling.
    3rd: Same like 1st..but the day of execution will deferrs...(ABAPer will take care of it)
    Disadvantages:
    - in the BDC program you have to hard code the number range
    - you can't have an option to block / release the block using the edit proposal option
    - IDoc creation depenedency should based on the volume of the payment documents: means after how much time this IDoc job scheduling should happen
    Re: Automatic scheduling of the automatic payment programme

  • Bapi or function module for Tcode F-54

    Hi,
    I need Bapi or Function moudle for tcode F-54. I am developing interfaces. I have to clear the the advance amount against an invoice.
    Regards,
    Dhanunjaya Reddy.

    Hi,
    Check the below userexits
    F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002            FIDCC1: Change IDoc/do not send
    F050S003            FIDCC2: Change IDoc/do not send
    F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
    F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006            FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007            FIDCCH Outbound: Influence on IDoc for Document Change
    F180A001            Balance Sheet Adjustment
    FARC0002            Additional Checks for Archiving MM Vendor Master Data
    FEDI0001            Function Exits for EDI in FI
    RFAVIS01            Customer Exit for Changing Payment Advice Segment Text
    RFEPOS00            Line item display: Checking of selection conditions
    RFKORIEX            Automatic correspondence
    SAPLF051            Workflow for FI (pre-capture, release for payment)

  • Usage of ALE - idocs generated for BAPIs

    Hi
      I need to use - the std idocs generated for BUS2032 object - CREATEFROMDAT2 method to store the BAPI call  ( BAPI_SALESORDER_CREATEFROMDAT2 )data for those sales orders that could not be created.
    If I want to use the SAP delivered BAPI ( BAPI_SALESORDER_CREATEFROMDAT2 ) to call as it within an ABAP program - and then if the call did not go through - then log the data for BAPI into the corresponding idoc with the message type SALESORDER_CREATEFROMDAT2 ( idoc type SALESORDER_CREATEFROMDAT202 )  do I need to move the values from the BAPI structures to the idoc segments programatically ?  Or since the idoc is linked to the BAPI - by definition, is there an implicit way to move data to the corresponding idoc segments and save the idoc .
    Can anyone out there give me a code sample to do - what I have asked above ?

    Hi,
    I guess you can use function module ALE_SALESORDER_CREATEFROMDAT2 to create idoc from bapi data. You can pass the entire data in internal tables that you are passing to BAPI into above mentioned function module and then it will create an Idoc for the same. Also populate the receivers in the internal table receiver.
    KR Jaideep,

  • Need a BAPI for Tcode 'OX19'

    Hi,
      I need a BAPI for Tcode 'OX19' so that the comapny codes for that Controlling area gets updated in the database.
    Regards,
    Deepthi.

    Hi,
    Using the  BAPI "BAPI_COAREA_GET_RELATED_CCODES" , I am able to view the company codes for that Controllling area. I need for Creation of Company codes for the controlling area. can you tell me please.
    Regards,
    deepthi.

  • Regarding BAPI function module for Tcode PPOME

    Hi All,
         Is there any Bapi FM available for Tcode PPOME for creating or modifying the Position number..Because based on tat position number i hav to update the designation, Position and description............
    Thanks
    Sai sudarshan

    Hi,
    I don't think you have a standard BAPI to either create or change position.
    Thanks,
    Mahesh.

  • When and where IDOC is triggered for TCode MD04

    Please guide me when and where IDOC is triggered for TCode MD04. In my case it is triggering even though I am trying to save a PO with error or on hold.

    Hi,
    Idoc triggers when we save or change the PO. It depends on the message control settings in the partner profile. Check the message control settings.
    thanks
    sarvesh

  • Any BAPI for tcode :FB50/FB50L

    HI ,
    is there any BAPI for tcode FB50 & FB50L.
    POints will be rewarded
    Thanks in advacne

    hi
    List of all BAPIs
    http://www.planetsap.com/LIST_ALL_BAPIs.htm
    http://www.sappoint.com/abap/bapiintro.pdf
    http://www.sappoint.com/abap/bapiprg.pdf
    http://www.sappoint.com/abap/bapiactx.pdf
    http://www.sappoint.com/abap/bapilst.pdf
    http://www.sappoint.com/abap/bapiexer.pdf
    http://service.sap.com/ale
    http://service.sap.com/bapi
    http://www.geocities.com/mpioud/Abap_programs.html
    http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
    regards
    ravish
    <b>plz dont forget to reward points if helpful</b>

  • BAPI or BDC Program For Contracts VA41,42

    Hi all,
    send me BDC or BAPI programs for Contracts VA41.
    I fond some sample coding by searching in SDN but they looks like a single paragraph can't split that.
    Thanks & regards,
    Arun.

    Hi,
    Use BAPI BAPI_CONTRACT_CREATEFROMDATA. For coding, you don't have to search. Just read the FM documentation. Thats enough for coding.
    Try to search for where used list of this BAPI. If you are lucky enough, you can get the sample code as well.
    Thanks,
    Vinod.

Maybe you are looking for