BAPI /FM to create /change KANBAN control cycle

Hi
Is there any BAPI or FM to create or Change control cycle?
Thanks.

Check
BAPI - BAPI_KANBANCC_ADDEVENTDRKANBAN
Short Text
    Create Event-Driven KANBAN for Control Cycle
Functionality
    With this method you can procure a material quantity for a control cycle. To procure this material quantity one or more kanbans are created in the control cycle and set to status EMPTY.
    The essential entry parameters are:
    o   Control cycle (if the function module is called as a method for the object kanban control cycle, this parameter is not available, but given by the object.
    o   Material quantity
    Information about the status change is issued.
    COMMIT and ROLLBACK WORK: the function module does not carry out any COMMIT work. Command off. This must be ensured by the initiator after ending the function module. Each time the function module is called, a COMMIT WORK must take place. It is not permitted to call this FM several times and to post the result with a COMMIT WORK. If, during the process,
    the FM comes across an error, in some cases the command ROLLBACK WORK wil be carried out. In these cases the kanban is either set to ERROR status, or in the parameter RETURN an error message is given.
Hope this helps.
Regards
Vinayak

Similar Messages

  • User Exit for PKMC (Kanban Control Cycle)

    Dear Gurus,
    I need to know if there is a user exit in PKMC (kanban control Cycle) to create a extra tab next to the print control tab in the bottom.
    Best Regards,
    Kumar

    List of exits available.
    Enhancement/ Business Add-in            Description
    Enhancement
    MPKR0001                                Customer fields in kanban control cycle
    MPKP0002                                Customer-Specific Fields Call Interface
    MPKP0001                                Customer Defined Display in Kanban Board
    MPKD0001                                Kanban output as EDI
    MPKCCY02                                Customer Error in SumJC Control Cycle
    MPKCCY01                                User-Defined Fields in Kanban Control Cycle (PKMC)
    MPKC0001                                User exit for kanban calculation
    MPKB0002                                Customer defined display in kanban board
    MPKB0001                                User's own functions in the Kanban processing
    Business Add-in
    BADI_PVBE_UPDATE_APO      PVB Publish Changes to the APO
    MPKC_REQ_SELECTION           BAdI for Requirements Selection for Kanban Calculation
    PK_CALL_INTERFACE              Customer-Specific Fields Call Interface
    PK_CCY_SELECTION               Selection for Maintaining Control Cycles
    PK_REVERSAL                          BAdI during reversal of Kanban

  • PP Kanban control cycle

    Hi team,
    I was referring the below statement to understand the control cycle.
    The Kanban Control Cycle business object is used to control the flow of information and material between the demand source and the supply source in a pull environment. It controls the material quantities in production. It defines a loop between demand source and the supply source for recurring replenishment.
    In the above statement, it is mentioned that, it is linking the demand source and supply source. In SAP, how we are linking the the demand source and supply source?
    While creating the supply area in PK05, we are providing the storage location. Is this supply source or demand source?
    In SAP, where we are assigning the another source (supply / demand source)?
    Regards
    psk

    Hello Mario,
    Thank you very much for your detailed explanation on storage bin and container.
    1. So, if the storage location is not WM managed, there will not be any storage bin. The storage location itself will act as a storage bin. Am i right?
    You said that, Containers are the physical means in which materials are kept in this process. a container usually equals a KANBAN. Normally there are at least two (but can be more) containers in a control cycle.
    2. We are using pallets to replanish the supply area storage locations (production store which is near to work center). So in this example, the pallets are called as "containers". Am i right?
    Consider the below example:
    3. In control cycle i have maintained the number of kanban as 4. As you said above, i need to maintain 4 containers. But i have only one field to maintain the container. How to maintain 4 containers in one field?
    Thank you.
    psk

  • Deletion of KANBAN control cycle

    Hi All,
    I need to delete a KANBAN control cycle which is the TCODE used for doing so , another problem is that the control  cycle is created with the TCODE PK01 and the sypply area is a ware house related  one .
    Thanks and Regards,
    Mallik.

    Hi,
    Delete the Kanban control cycle with the Transaction: PK02.
    Control Cycle --> Delete Entry (Shift+F2)
    Best Regards,
    Siva

  • KANBAN control cycle quantity changes tracking -reg

    Hi,
    Which tables and fields are to be used to knwo the changes in the kanban quantities in the control cycle of a part number
    for a part number over a period of time what and all changes are done to the kanban quantity we would like to track
    how to go about ?
    pl guide
    regards,
    madhu kiran

    Hi,
    Try Table PKCH and field PKCMG.This would be your best bet.

  • Create KANBAN control cycle (PK01) via LSMW

    Hi,
    Anybody perofrmed control cycle creation via LSMW using BAPI or IDOC method? I need to know the Business object (BAPI method) or Message type for IDOC menthod in LSMW for PK01 tcode.
    Thanks.

    you should enable the F4 search help in your LSMW.
    I have it active and found Idoc PKHD5

  • Stanging indicator change in control cycle after production order released

    HI
    We have MM PP interface active
    i setup staging indicator 4 for one material via control cycle
    Production order is created and released
    now we would like to change staging indicator to 1 [pick parts]
    how we reread control cycles data in production order
    Thanks

    Try: CO02 > Functions > Read PP master data

  • Kanban - Control cycle

    Hello all!
    I am trying to create a control cycle for Kanban in my test system. I have created replenishment strategy in Customizing for Kanban and this was transferred all to my test system. When I want to input the address for a vendor it says: Replenishment strategy in plant ... does not exist.
    I suppose there must be a problem with my Replenishment strategy which I have created in Customizing for Kanban. I was not sure about what I need to specify. I have specified plant, type of Procurement:it is an external Procurement, working with Scheduling agreements, Order type - LP, GR - 101, Signal lock- 0. These are all information, which I have specified I was not sure about the rest.
    Please could anyone help me ??

    Hi,
    I answered to few of the threads, hope it will help you, if required any further info please let us know.
    Re: Implementing KANBAN-WM
    Re: Creation of control cycles for lean WH
    thanks
    Om

  • KANBAN control cycle pk01 error

    Hi friends,
    I am using SAP 5.0 and material is WM activated, getting error while creating control cycle in PK01.
    Error -: Storage bin 002 / / does not exist {Message no. PK033}
    Note-:it can be solved with PKMC but in SAP 5.0 Pkmc T-code is not available.
    Regards
    Amit

    Hi,
    Check in the material master for the material, whether you have maintained any fixed bin in WM2 for the storage type 150.
    Thanks,
    JK

  • ABAP report to use in analysis of Kanban Control Cycle

    Hi Experts,
    I have requirement to develop a new custom report 'Kanban history'.
    When someone makes a change to transaction 'PK02', we need to have Kanban History of that change in our new custom report.    Also,  when someone makes a change to transaction PK13N or PK12N on a kanban correction, we need to capture that history to be able to followup on status  changes  or kanban corrections made from that screen.
    As an example,  this kanban history report can be displayed much like the material master history is displayed.
    I need your suggestion to achieve this requirement.
    Thanks,
    Leo

    Hi Leo,
    1. Create a Ztable with the fields you want to capture.
    2. Find some EXIT's/ BADI or Enhancment points in the t-codes during SAVE.
    3. Save ammendments done using the t-code to your Z table .
    4. Develop report based on the data you have in your Z table.
    I also had a similar requirement to capture the PO ammendment data and  display in custome reports
    same logic worked
    Hope this helps.
    Regards
    Bikas

  • BAPI for PO Create/Change with use of EXTENSIONIN table

    Hello,
    We are using SRM extended classic scenario which copies PO's from SRM to ECC via function module BBP_PO_INBOUND.  This function module does mappings and then calls either BAPI_PO_CREATE1 or BAPI_PO_CHANGE.  I have added field YYVSBED (char2) to structure CI_EKKODB.  When BAPI's are called this field is present in ExtensionIn structure.  While debugging the processing, I can see that it being processed, however, it does not get posted in database.
    Any suggestions are very welcome.
    Thank you.
    Natasha

    Internally the BAPI uses the the MEPO...-Structures .  Your data is lost  at the move-corresponding from the BAPI-Structure to the related MEPO... structure . If your target-field is an EKPO-Field you have to check if there is a field in the MEPOITEM -structure . 
    If you use the CI_EKPODB  to extend the EKPO with your custom field, the BAPI would work, because this is included in EKPO and MEPOITEM   .
    Best regards Josef

  • Change control cycle record

    Hi all,
    Can anyone please tell me the transaction code or if some config. required to change my control cycle record.
    I created one from PK01, now when I wish to edit it at PK02, it gives me the following error.
    Control cycle from WM/PP may not be processed here
    Message no. PK083
    Diagnosis
    Control cycles are created both for Kanban and for warehouse management. However, control cycles created for the warehouse management system may not be used in Kanban and vice versa.
    Any help is appreciated
    Rgds,

    HI
    I am also facing the same problem.
    I am working on r/3 4.7
    Please can any one help regarding this problem.
    Thanks in advance

  • SNC Kanban Issue - Control Cycle Master Data

    Hi,
    We are testing the SNC Kanban scenario with contracts (PO) between ECC & SNC.
    We have created a control cycle for the ECC material and have sent the Master Data to SNC. We are now trying to send over the control cycle info to SNC and are getting hte following message when we run KANBAN_MD_TRANSMIT:
    "Kanban control cycle 70666: No address data available; processing terminated"
    Any suggestions would be appreciated.
    regards.

    Hi Anjan Bellur
    As per the error message, the address details for your supply area are not maintained
    Kindly go to the transaction PK05 in r/3 system
    For your plant and Production supply area, Shift+F5
    Maintain the address details
    Then the reported error message will not appear
    Best Regards
    Vinod

  • BAPI  for create/change purchase info record

    Hi All,
    Could any one suggest me the BAPI for the create/change purchase info record(ME11/ME12).
    Earliest can be appriciable.
    Regards
    Anil

    Hi,
         I did not get any bapi related to create/change purchase info. But i can give u list of purchase info . if u got revert back to me
    Reward if it is usefull..
    Bye.
    BAPI_INFORECORD_GETLIST

  • BAPI for create/change Routing

    Hi ,
         Are there any BAPI's for creating/ changing routings.
    Regards,
    Divyanshu

    hi,
    <b>BAPI_ROUTING_CREATE</b>"used for creation.
    Regards
    vijay

Maybe you are looking for

  • I have Acrobat 9 Pro....Printing issues

    I have creted a PDF out Illustrator.....views fine, but when I print some of the copy is not printing and random shapes or boxes are there instead.....I have tried it on 2 different printers.  ....now, I have emailed it to friends and they seem to pr

  • FTP file to SOAP asyn

    I created a simple scenario which using FTP file adapter to send out a xml message, then I want to use SOAP adapter to receive the message and send it to a web service to display the message. No response back. My data type is as follows: DATA_FILESEN

  • Blank not Zero for Display in report

    Hi, For a Particular Calculated Key Figure X, I get a Zero value using a logic such as if Y=0; X=0. For Display in Report, Currently it shos the vakue as Zero. I want to show it as a blank vaklue instead. Could you suggest how to achiev this ? I can

  • Lock table

    My archival jobs continuously fails because of Lock table overflow even after increasing parameter enque/table_size  and then bounced. But  in SM12  No lock entries found  Under SM12 EXTRAS -> STATISTICS OR DIAGONOSTIICS are inactive Job logs as belo

  • Question concerning homogenous system copy abap+java

    Hi, I have the following question: we are running a SAP ERP2005 und Linux/Oracle. We need a restore of the productive system form an early date, due to problem analysis. Because this system copy was not planed we didn't do the java SDM dump (as descr