BAPI/FM to Create Projects from Templates

Is there any BAPI/FM that can create Operative Project Structures referring the Standard WBS including all objects i.e, WBS,N/W,Activities,Milestone of standard project?
If not, what could be the work around?
Regards
Sreenivas

Hi Robin !
        I have the same issue here, to create projects from a template, using a Function Module to do that, and I tryed to use the FM CJWB_PROJECT_COPY as you suggested, and I achieved to create project from template but, for any reason not known by me, the project is created without status object, so I can´t open it on any transaction(CJ02/CJ03/CJ20n...). I have tested it in SE37, using test sequences, so I call it and BAPI_TRANSACTION_COMMIT to save the data.
        To make the projects available to work, I needed to run a report named CNSTATUS as explained on SAP Note 170948.
        Do you know why using CJWB_PROJECT_COPY created the projects without status object assignment ? I could not find any documentation about this function, so maybe the problem can be caused by some wrong parameter that I was passed to it.
        Do you already used it ? If yes, can you send a sample code ?
        Thank you in advance, and best regards !
        Wilson

Similar Messages

  • Error when creating project from template

    I'm getting an error when i try to create a project from template. It's the same error no matter which template i select.
    WebIDE: 1.9.3.1
    Is there a new setting i missed or...?

    Henrik Damhøj Andersen
    Problem has been resolved. Please check again.
    Regards,
    JK

  • Create project from template failed with "badly formed pathname" error message

    Hi,
    I am trying to create a project from a custom template, but I am getting the following error message prompt:
    LabWindows/CVI could not create
    Test_Project
    because of an error: Badly formed pathname
    However, when I checked the target project directory, I see the project files are copied correctly.  I don't know if there is something missing from our custom templates?  Of, if there is something wrong with our custom template?
    I am using LabWindows/9.0
    Thank you.
    Peggy

    Hi Peggy,
    Did I understand you correctly that the files for the new project appear to have been created, but the error dialog still shows? In addition to Wolfgang's suggestions, take a look at the help section on New Project and File Templates. This describes everything that should be needed to create a custom template. Also, try to create a new, very basic custom template and make sure that you can use it successfully. If you can, start adding in the functionality of the original template, and test along the way. Hopefully either this new one will work once you finish, or you will see at which point it is breaking, and we can debug from there.
    Best Regards,
    John M
    National Instruments
    Applications Engineer

  • Can't create Project from the Template or access project template

    Dear Experts,
    We are facing a issue while trying to access the project template/create the project from project template.
    we have 4 project template in place and of these two are working perfectly fine but
    From remaining two we are not being able to create project and even templates are not accesible , whenever we are trying to access the project template system rotates a circle for some time and keeps us on the same page.
    Even when we are trying to create project from the same template, system does the same again rotates the circle for some time and keeps us on the same screen.
    And System is not throwing any error for the same (we have checked in the log as well) just not letting us in and not allowing us to create project.
    Any Help Will be Highly Appreciated.
    Regards,
    Rakesh Daiya

    Dear Experts,
    We were able to find out the issue,
    We added 3 groups to the template with "Reviewer" access with "Document Only" Type in the project template.
    When we changed the type to "Template and Document" from "Document Only" and  system started allowing us to create projects from the template.
    Can anyone please help me with one query,
    Can we add a group(which includes all the buyers) with reviewer access and with Document only type?
    Does this really be a reason behind projects are not getting created from template?
    Any help will be appreciated
    Regards,
    Rakesh Daiya

  • BUG:  Advanced Actions duplicated when creating NEW PROJECTS FROM TEMPLATE using Adobe Captivate 8.

    Need:  CREATE NEW PROJECTS FROM TEMPLATE using Adobe Captivate 8. 
    Problem:  NEW PROJECT (.cptx) duplicates the Advanced Actions originally configured within TEMPLATE FILE (.cpt.).
    For example: Template file (.cptl) advanced action "_initializeModule" gets duplicated as "_initializeModule1", "_initializeModule2", "_initializeModule3" within NEW PROJECT.  FYI, the original "_initializeModule" advanced action still appears.
    MAJOR BUG, what the heck is going on?!?!!!  Planning to deploy this template file to use for multiple courses with multiple users, this WILL cause epic confusion across the board.

    Similar problem, think they are working on it as well: when dragging a shared action from an external library to a slide or object event, and that action is using a parameter that was already created for another shared action, there will be a new parameter created which really screws up the shared action contrary to this problem. Tip: for the moment do not drag shared actions from an external library immediately to an event, but drag them first to the Library: Reuse Shared Actions in other Projects - Captivate 7 vs. 8 - Captivate blog

  • Automatcally create Project from Sales Order

    We are on SAP R/3 4.7. We are currently using Project system for customer projects. We are manually linking the WBS element to the sales order item.
    We are considering to automatically creating project from sale order.
    Can someone offer any suggestions or recommendations?
    If you have already done in the past, did you encounter any issues or concerns that need to be considered?
    Thank You
    Sanjay

    Hi,
    As per standard configuration:
    1.) Maintain requirement class in OVZG as 80
    2) Maintain Requirement type in OVZH as KP and assign 80 there
    3) Strategy in SPRO->Project System->material->Strategy and maintain requirment class and requirement type and account assignment there.
    4).Then maintain strategy in strategy group...it would be same as 85.
    5). Then you can maintain item category from SD side and item category group from MM and assign these item categories to SD document type .
    6). Now create standard templates(Project and network activities and make assignment to standard project)
    7). Create configurable material(Variant configurator) in MM01 as KMAT and maintain item category group as same defined above and maintain strategy group in MRP tab same as defined above.
    8). Now assign these Variant configurator to standard network and projects in CN08.
    Look into these setting would definately help you.
    Regards
    Abhinay

  • Can't create VM from template on iSCSI

    Hello,
    I'm trying to create new VM from original Oracle template "OVM_EL5U3_X86_64_PVM_4GB" on iSCSI device without a success.
    Steps to reproduce:
    1) /OVS is mounted as iSCSI block device
    2) Original Oracle template is copied into /OVS/seed_pool/OVM_EL5U3_X86_64_PVM_4GB
    3) Oracle VM Manager - Import template (no problem)
    4) Oracle VM Manager - Create VM from template
    Result: Files are copied into running_pool, vm.cfg is updated, new VM is visible in VM Manager but with this message:
    failed: <Exception: Error updating the image.> StackTrace: File "/opt/ovs-agent-2.2/OVSSiteVM.py", line 471, in config_vm raise Exception("Error updating the image.")
    5) Oracle VM Manager - Start new VM
    Result:
    Status in VM is Running
    I can connect using VNC console
    But the VM is constantly rebooting with these messages on the console:
    Registering block device major 202
    xvda: xvda1 xvda2 xvda3
    xvda: p2 exceeds device capacity
    xvda: p3 exceeds device capacity
    Waiting for driver initialization.
    xvda: rw=0, want=101530648, limit-12707414
    attemp to access beyond end of device
    switchroot: mount failed: No such file or directory
    Kernel panic - not syncing: Attempted to kill init!
    Looks like there is a problem with partition sizes within the VM image file (xvda: p2 exceeds device capacity)
    I've tried to mount iSCSI formated with ocsf2 and ext3 - I'm getting the same error.
    However there is no problem when I mount /OVS as NFS or local drive and repeat the steps above.
    Any suggestion would be highly appreciated,
    Honza

    It's all sorted now.
    What I've learnt: OVS/Xen hypervisor doesn't seem to handle 4kB iSCSI block sizes.
    I had to change it to 512 bytes (configuration on the iSCSI storage - nothing on the Oracle VM side) and re-create all volumes.
    Just in case you experience something similar.
    Honza
    Edited by: Honza on Jul 21, 2009 3:00 PM

  • Can't create VM from template

    Hello,
    I'm getting this error when creating VM from template:
    failed: <Exception: Error updating the image.> StackTrace: File "/opt/ovs-agent-2.2/OVSSiteVM.py", line 471, in config_vm raise Exception("Error updating the image.")
    The VM is actually created despite this message bot when I try to power it up I'm getting another error:
    failed:<Exception: ['xm', 'list', '478_CITConnect_Internal_TEST']=>Error: Domain '478_CITConnect_Internal_TEST' does not exist. > StackTrace: File "/opt/ovs-agent-2.2/OVSXXenStore.py", line 192, in xen_get_vnc_port vm_id = xen_get_vm_id(vm_path) File "/opt/ovs-agent-2.2/OVSXXenStore.py", line 34, in xen_get_vm_id stdout = run_cmd(args = ["xm", "list", vm_name]) File "/opt/ovs-agent-2.2/OVSCommons.py", line 98, in run_cmd raise Exception('%s=>%s' % (cmdlist, p.childerr.read()))
    The template was copied from another VM pool (where it works fine, version 2.1.1) to a newly configured VM Server (2.1.5).
    The new server is configured for HA (shared storage) and I was able to create VM from ISO without any problem there.
    The template was created from existing VM (Oracle EL4 PV) running on the "old" server.
    Any ideas where I should look into?
    Thanks
    Jan
    Edited by: Honza on Jul 9, 2009 10:48 AM

    It's all sorted now.
    What I've learnt: OVS/Xen hypervisor doesn't seem to handle 4kB iSCSI block sizes.
    I had to change it to 512 bytes (configuration on the iSCSI storage - nothing on the Oracle VM side) and re-create all volumes.
    Just in case you experience something similar...
    Honza

  • Remove Templates from Create Incident From Template Selection

    Originally all users had access to all of the templates created, however now that we have been using SCSM for a while the number of templates created has started to grow and make the Create Incident From Template Screen difficult to navigate.  I am
    trying to limit the number of templates each team sees based on security group, however when I uncheck the templates from the Form Templates section of the User Role, they continue to display for all users.  Is there somewhere else I have to go in and
    change this that I am missing?

    Hi,
    Take a look at this thread:
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/d0b64ab8-ea5a-4426-968e-77675193473f/hiding-templates-from-console-users-while-still-effectively-using-the-end-user-role?forum=administration
    (By default the End User role has access to all templates, and the members of that role is Authenticated Users)
    Regards
    //Anders
    Anders Asp | Lumagate | www.lumagate.com | Sweden | My blog: www.scsm.se

  • Workflow - create document from template

    Hi,
    Could anyone tell me what could be the possible use of Create Document from Template step in workflow...

    Hi vijay,
    1)Open the PC application by choosing the entry Double-click to create in the Document templates tray by double-clicking or choose  in the step definition of the document generation.
    The PC application that you last used to create a template is opened in the Workflow Builder. The system fields and the container elements of the workflow container are offered for selection in the navigation area. They can be transferred into the template by double-clicking.
    You cannot use any multiline container elements in your template.
    All relationships created between container elements/system fields and the document template are displayed in the object area.
    It is not possible to insert system fields and container elements into all types of document template.
    2) If you want to create a document template of a different class, select  Change document class and choose the new type of document template.
    3) Select  to assign a name for the document template.
    4) Create the document template in the usual way in your PC application. You can use all the functions of the PC application.
    5) Insert container elements and/or system fields from the object area into your template by double-clicking. These fields are replaced with the content of the container elements/system fields at runtime.
    6) Select  to save your document template.
    Hope this helps u,
    Regards,
    Nagarajan.

  • InDesign CS5- where is create new from template?

    Hi,
    I was looking for creating something new from one of the default templates of CS5, like I've done in the past with CS3 and CS4.  However I find that there doesn't seem to be an option to create new from template.
    Am I completely missing where it is?  Have they called it something else?  Have they removed the default ones completely from InDesign?

    I should perhaps amend that to don't waste time with a template for multiple labels on a sheet. If you see something that works for you as far as basic layout, make a one-up lable from it (cupy the elements from a single label into a new file sized for only one label). Get a sheet full of blank labels, place that file in the upper left position on your larger sheet layout, then use Edit >Step and Repeat... to make the grid. This is much more efficient as it allows you to edit the entire sheet at one time by editing the single label file.
    If you need to d a data merge, you can do nearly the same thing -- put a single blank label layout in the upper left position, add your merge field placeholders in that one label, and run the merge. DO NOT put anything beyond the single label layout on the sheet for a Data Merge job. Also, note that there is a bug in CS5/5.5 that will give you an incorrect multiple records merge if you try to preview. If you preview you must use Undo before the merge to go back to the pre-preview state.

  • ABAP class to create doc. from template

    Hi all,
    Does anybody know if is there any ABAP class which can call the "Create with template" functionality?
    The idea is to create an action associated with the Service Ticket, which will create a document from template (Content Management functionality) when the Service Ticket is closed.
    We could use SmartForms, but it seems to have some restrictions:
    . Template maintenance is not so user frindly (the content management templates can be created/mantained in MS Word)
    . The document is not stored within the Service Ticket context
    Kind regards,
    Dora

    Hi Lance,
    you are right. There's no "Create User from template" or "Copy User" Activity in the Integration pack for Active Directory in System Center SP1 or R2.
    Perhaps, you can use "Get User" to get some settings from the template and subscribe the results to "Create User" Activity.
    Regards,
    Stefan
    www.sc-orchestrator.eu ,
    Blog sc-orchestrator.eu

  • Problem in created project from DTR

    Hi,
    I am getting error when trying to do something in the newly created project from DTR.
    Error like this :
    Checkout is not possible. See below for details.
    The operation requires the writeability of the following Objects:
    Component Controller com.pg.adcs.stl.SendToLab
    ======>problem: DTR workspace is not modifiable /GGT_AntiDiv_Dsendtolabcom.pg.adcs/src/packages/com/pg/adcs/stl/SendToLab.wdcontroller.xlf
    ======>problem: DTR workspace is not modifiable /GGT_AntiDiv_Dsendtolabcom.pg.adcs/src/packages/com/pg/adcs/stl/SendToLab.wdcontroller
    Please help me on this...
    Thanks
    Arun

    Thank for the reply,
    After the created project from DTR, it was need to sync resoures and sync used DC. Now its working.

  • Integration pack to create user from template

    Does anybody know if the Orchestrator 2012 Sp1  active directory integration pack has a way to create user from a template?
    I believe there is a create user but not from a template.
    Thanks
    Lance
    Thanks Lance

    Hi Lance,
    you are right. There's no "Create User from template" or "Copy User" Activity in the Integration pack for Active Directory in System Center SP1 or R2.
    Perhaps, you can use "Get User" to get some settings from the template and subscribe the results to "Create User" Activity.
    Regards,
    Stefan
    www.sc-orchestrator.eu ,
    Blog sc-orchestrator.eu

  • While creating project from inactive dc not able to view the project struct

    Dear All,
    I have created project from inactive dc now when I open the project in the webdynpro explorer I am not able to view the application, component and models.  I have tried reloading and repairing but still the structure is not appearing.  Can anyone tell what I may be doing wrong.
    Thankyou
    Regards,
    Ganesh

    Dear Bala,
    I have got about 8 to 10 DC's out of which only this one is showing the missing structure and as this dc is being used by other dc's I am getting the error like missing component.  Previously we were using the client desktop and doin the work now we have shifted it to our individual systems.  Now any project I am creating whether from same track or different same problem comming the structure is missing.
    Regards,
    Ganesh
    Edited by: Ganesh Sawant on Sep 8, 2009 9:42 AM

Maybe you are looking for