Bapi/Fn Module for changing Routing

Hi All,
Currently I am working on creation and change of Routing using BAPI's . I could find the routing create bapi BAPI_ROUTING_CREATE and it is working fine.
Can some one help in identifying the BAPI/Function Module for modifying /changing the Routing. For changing details in routing currently we are using t code CA02.
Thanks ,
Vengal Rao.

Hi Joerg,
Thanks for the function module. A small issue I am facing. when executing it some data in it I am getting error message
as follow: HIGH_MSGTY - E , ERROR_FROM - 1, ERROR_TO - 1, OBJ , D_IND - 0000000001 .
Please guide me how to identify this error message.
Thanks,
Vengal Rao.

Similar Messages

Need BAPI function module to change routing (CA12 Tcode)

Hi Freinds,
   i have bapi function module to create bapi_routing_create,
   but i need bapi function module to ROUTE CHANGE.
tcode is ca12
   pls help me out .....it's urgent to me
mail to me :[email protected]
regards
madhu

Thanks Jitendra,
I have tried to use it but I am not able to obtain a good result. I have set values for PLKO_DI_TAB and MAPL_DI_TAB, but it does not work…
What is missing?

BAPI Function module for transaction ME32K for change

Please let me know the name of the BAPI Function module for transaction ME32K for change the contract.

Hi Krishan,
I have checked but their is no BAPI called
BAPI_CONTRACT_CHANGE.
If I am wrong plz correct me with the procedure to view the above BAPI in SAP System.
Regards,
Nitin

BAPI Function Module for SCM APO Tcode /SAPAPO/AC42

Hi,
I want to know the BAPI Function Modules for SCM APO Tcode /SAPAPO/AC42.
   This BAPI FM should return the column values "Remaining Prod Alloc" and "Incoming Order Quantity" when we give
   below details as inputs for the Tcode /SAPAPO/AC42
        Product Allocation Group
        Product
        Allocation Procedure
        prod Alloc step
        Product Alloc Object (Characteristics of Product Alloc Group)
        Plant (Characteristics of Product Alloc Group)
        Customer Group 5 (Characteristics of Product Alloc Group)
    Reward points if helpful.
Thanks,
Mich

Hi,
You should be able to get the information using the standard BAPI (Assuming you are using SCM5.0) BAPI_APOPAL_INSERT in the transaction BAPI.
ProductAllocationAPO.DataInsert
Interface to Import Product Allocation Data Functionality
This method is used to adopt data from OLTP systems for product allocation in the global availability check.
You can do the following using the method:
Adopt new data
You can adopt new characteristics combinations or new time series. Newly created characteristics combinations have the status Active and are therefore included in the product allocation check.
Change existing data
You can overwrite existing data if you have set the interface parameter ALLOW_UPDATE. You can set the status of existing characteristics combinations to Active if you set the interface parameter UPDATE_STATUS. If the characteristics combination does not exist, the system creates it.
The product allocation quantity is overwritten for existing time series. If you also want to change the incoming orders quantity, you must set the interface parameter UPDATE_INCOMING_ORDER_QTY. If the time series does not exist, the system creates it.
Prerequisite
To be able to use this method, you must have made all the Customizing settings for product allocation. For more information, see the Implementation Guide (IMG) for SAP APO under Global Available-to-Promise -> Product Allocation.
Regards
Vinod

BAPI Function Module for SCM APO Trans code /SAPAPO/AC42

Hi,
   Is there any BAPI Function Modules for SCM APO Tcode /SAPAPO/AC42.
   This BAPI FM should return the column values "Remaining Prod Alloc" and "Incoming Order Quantity" when we give
   below details as inputs for the Tcode /SAPAPO/AC42
        Product Allocation Group
        Product
        Allocation Procedure
        prod Alloc step
        Product Alloc Object (Characteristics of Product Alloc Group)
        Plant (Characteristics of Product Alloc Group)
        Customer Group 5 (Characteristics of Product Alloc Group)
    Reward points if helpful.
Thanks,
Mich

Hi,
You should be able to get the information using the standard BAPI (Assuming you are using SCM5.0) BAPI_APOPAL_INSERT in the transaction BAPI.
ProductAllocationAPO.DataInsert
Interface to Import Product Allocation Data Functionality
This method is used to adopt data from OLTP systems for product allocation in the global availability check.
You can do the following using the method:
Adopt new data
You can adopt new characteristics combinations or new time series. Newly created characteristics combinations have the status Active and are therefore included in the product allocation check.
Change existing data
You can overwrite existing data if you have set the interface parameter ALLOW_UPDATE. You can set the status of existing characteristics combinations to Active if you set the interface parameter UPDATE_STATUS. If the characteristics combination does not exist, the system creates it.
The product allocation quantity is overwritten for existing time series. If you also want to change the incoming orders quantity, you must set the interface parameter UPDATE_INCOMING_ORDER_QTY. If the time series does not exist, the system creates it.
Prerequisite
To be able to use this method, you must have made all the Customizing settings for product allocation. For more information, see the Implementation Guide (IMG) for SAP APO under Global Available-to-Promise -> Product Allocation.
Regards
Vinod

BAPI or FM for CHANGING Internal Order

Hi all,
I am looking for a BAPI or Function module for changing a End of Work field (DATE field) for that Internal Order. Transaction for internal order KO02
Please suggest.
Edited by: Anu on Jul 6, 2009 3:30 PM

Look at [BAPI_INTERNALORDER_SAVEREPLICA|https://forums.sdn.sap.com/search.jspa?objID=c42&q=BAPI_INTERNALORDER_SAVEREPLICA] (parameter MASTERDATA field DATE_WORK_ENDS)
Regards,
Raymond

BAPI/Function Module for approve Appropriation Request?

Hi Friends,
Please guide me for
BAPI/Function Module for approve Appropriation Request?
Regards
Ricky

Hello
Check these BAPI
BAPI_APPREQUEST_ADDVARIANT     Add a Variant to an Appropriation Request
BAPI_APPREQUEST_CHANGE         Change an Appropriation Request
BAPI_APPREQUEST_CHANGEVARIANT Change Appropriation Request Variant
BAPI_APPREQUEST_CREATE         Create Appropriation Request
BAPI_APPREQUEST_DELETE         Deletion of an Appropriation Request
BAPI_APPREQUEST_GETDETAIL      Display of an Appropriation Request
BAPI_APPREQUEST_GETSTATUS      Display Status of an Appropriation Request
BAPI_APPREQUEST_REMOVEVARIANT Delete an Appropriation Request Variant
BAPI_APPREQUEST_SETSTATUS      Setting System and User Status of Appropriation Request
BAPI_APPREQUEST_SETSTATUSVARNT Setting of User and System Status on Variants

BAPI function module for FUNDS Update

Hi All,
Anybody can help us on BAPI function module for FUNDS Update in FI funds management module please.
Thanks & Regards
Srini

Hi,
We are writing a program to change / update the existing funds in table FMFINCODE funds master. Here we are using a function module called FM_FUND_CHANGE but we are not able to capture the return messages. So please suggest me any BAPI function module availble for the same. Tcode : FM5U
Regards
Srini

FBE2: BAPI or FM for Changing and Deleting Payment Advice

Hi,
I am looking for BAPI or FM for changing & deleting payment advice as we can accomplish from FBE2.
This is EC 6.0 upgrade issue for not be able to post using CALL TRANSACTION in background mode.
I tried the below FM's in the Function group FARMATCH, but all have them have the follwing code to select payment advice Header Table [AVIK].
SELECT * FROM AVIK INTO TABLE LT_AVIK WHERE (LT_WHERE) AND
                                              AVSID LIKE '09%'.    "This is not the case for my requirement
FARMATCH_CHANGE_PAYMENT_ADVICE
FARMATCH_DELETE_PAYMENT_ADVICE
I found another set of FM's REMADV_CHANGE & REMADV_DELETE but I am not sure if i can
achieve the same functionality of change and delete that we can do using FBE2.
If anyone had similar scenario, Appreicate your feedback.

Below is a sample code.
I am able to delete the details....
Take a look...:)...imp to add wait for few seconds
REPORT z.
PARAMETER: vbeln TYPE vbak-vbeln.
PARAMETERS: fplnr TYPE fplnr.
DATA: t_zfpla TYPE STANDARD TABLE OF fplavb WITH HEADER LINE.
DATA: t_zfplt TYPE STANDARD TABLE OF fpltvb WITH HEADER LINE.
DATA: t_fpla_new TYPE STANDARD TABLE OF fplavb WITH HEADER LINE.
DATA: t_fpla_old TYPE STANDARD TABLE OF fplavb WITH HEADER LINE.
DATA: t_fplt_new TYPE STANDARD TABLE OF fpltvb WITH HEADER LINE.
DATA: t_fplt_old TYPE STANDARD TABLE OF fpltvb WITH HEADER LINE.
*DATA fplnr TYPE fplnr.
IF NOT vbeln IS INITIAL.
SELECT SINGLE rplnr INTO fplnr FROM vbak WHERE vbeln = vbeln.
ENDIF.
CALL FUNCTION 'BILLING_SCHEDULE_READ'
EXPORTING
    fplnr = fplnr
TABLES
    zfpla = t_zfpla
    zfplt = t_zfplt.
LOOP AT t_zfpla.
MOVE-CORRESPONDING t_zfpla TO t_fpla_old.
t_fpla_old-updkz = 'D'.
APPEND t_fpla_old.
ENDLOOP.
LOOP AT t_zfplt.
MOVE-CORRESPONDING t_zfplt TO t_fplt_old.
t_fplt_old-updkz = 'D'.
APPEND t_fplt_old.
ENDLOOP.
BREAK-POINT.
*CALL FUNCTION 'BILLING_SCHEDULE_SAVE'
TABLES
   fpla_new = t_fpla_new
   fpla_old = t_fpla_old
   fplt_new = t_fplt_new
   fplt_old = t_fplt_old.
DATA fpltr TYPE fpltr.
CALL FUNCTION 'BILLING_SCHEDULE_MAINTAIN'
EXPORTING
I_FPLA           =
I_FPLT           =
   i_upd_fpla       = 'X'
   i_upd_fplt       = 'X'
    i_fplnr          = fplnr
IMPORTING
E_DATALOSS       =
E_UPD_FPLA       =
E_UPD_FPLT       =
   e_fplnr          = fplnr
   e_fpltr          = fpltr
TABLES
    fpla_new = t_fpla_new
    fpla_old = t_fpla_old
    fplt_new = t_fplt_new
    fplt_old = t_fplt_old.
WAIT UP TO 2 SECONDS.

Any BAPI/Function Module for adding new record with dates in PA0027

Hi all,
I am tryig to find is there any BAPI/Function module for updating new record with Start Date and End date for specified Personal Number in PA0027 Table.
In PA0027 table i will be passing start date and end date for selected personal number, it needs to add new record with this details in the table checking the condition that this start date and end dates should not be between any of of start date and end dates for the specified personal number.
thanks for ur time.
Murali

Hi Raj/Suresh thanks for ur answers.
but i am having a problem,i gave this values.
INFTY               -
            0027
NUMBER              -
            00000010
SUBTYPE             -
            010
OBJECTID
LOCKINDICATOR
VALIDITYEND         -
            03/12/2006
VALIDITYBEGIN       -
            03/01/2006
RECORDNUMBER        -
            000
RECORD              -
            P0027
OPERATION           -
            CHK
TCLAS               -
            A
DIALOG_MODE         -
            0
NOCOMMIT            -
            Y
VIEW_IDENTIFIER
SECONDARY_RECORD
i am getting short dump saying that
The source field is too short.
The current program, "SAPLHRMM", tried to assign a field to a field symbo
However, the field is shorter than the type of the field symbol, which
is not allowed.
The statement in question is in the form ASSIGN f TO <fs> CASTING or
ASSIGN f TO <fs> with a field symbol that was created using the
STRUCTURE addition.
I tried operation - Chage,Create (same thing for all inputs)
is this correct funtion moduel for my requirment?
what ever i am passing the start and end dates this should check in the table records with this personal number and if this start date and end dates are not between of any start and end dates then it should add new record with this dates.
Thanks for ur time.
Murali.

Bapi function module for ME32k Transaction

Hi all,
Can any one tell me what is the BAPI function module for ME32K transaction . I am trying to create service agreements in this transaction.
Even you can tell me if any other alternative procedure is there to create the service agreements in ME32K.
Bye
Srinivas

Hi srinivas p ,
Do you find some solution for this?! I have the same problem...
Can you help-me?
Patrícia.

BAPI/Function Module for transaction PR05

Hi All,
I am searching for BAPI/Function Module for tx PR05(Travel Expense Manager).
Thanks.

Check thread Transferring data into travel manager for Carlos David Moreno Lozano answer in message Re: Transferring data into travel manager
Regards,
Raymond

BAPI/Function Module for tx PR05(Travel Expense Manager)

Hi All,
I am searching for BAPI/Function Module for tx PR05(Travel Expense Manager).
Thanks.

Hi All
Thanks for your input.
I choose BDC option for PR05 maintain. As the BAPIs are calling PR01.
-RP

BAPI FUNCTIONAL MODULES FOR T codes FB50,FB60,KB31n,KP46

Hi friends
Can u suggest me BAPI function modules for T codes FB50,FB60,KB31n,KP46
Thanks in advance

Use BAPI_INCOMINGINVOICE_PARK
Import parameters HEADERDATA is mandatory in BAPI_INCOMINGINVOICE_PARK .
Also tables ITEMDATA and RETURN are mandatory.
Check the following sample code
LOOP AT i_ekbe INTO wa_ekbe.
CLEAR: wa_invoice_header,
i_invoice_item,
i_return,
v_inv_doc_no,
v_fisc_year,
wa_return.
REFRESH: i_invoice_item,
i_return.
Appending Invoice header Work Area
wa_invoice_header-invoice_ind = c_x.
wa_invoice_header-doc_date = sy-datum.
wa_invoice_header-pstng_date = wa_ekbe-budat.
wa_invoice_header-comp_code = c_100.
wa_invoice_header-gross_amount =
wa_invoice_header-currency = c_usd.
wa_invoice_header-calc_tax_ind = c_x.
Appending Invoice item data
i_invoice_item-invoice_doc_item = '0001'.
i_invoice_item-po_number = wa_ekbe-ebeln.
i_invoice_item-po_item = wa_ekbe-ebelp.
i_invoice_item-tax_code = ' '.
i_invoice_item-item_amount = '20.00'.
i_invoice_item-quantity = '10.000'.
i_invoice_item-ref_doc = '5600000634'.
i_invoice_item-ref_doc_year = '2006'.
i_invoice_item-ref_doc_it = '10'.
i_invoice_item-po_unit = 'EA'.
i_invoice_item-COND_TYPE = 'VPRS'.
APPEND i_invoice_item.
Calling module BAPI_INCOMINGINVOICE_PARK
CALL FUNCTION 'BAPI_INCOMINGINVOICE_PARK'
EXPORTING
headerdata = wa_invoice_header
ADDRESSDATA =
IMPORTING
invoicedocnumber = v_inv_doc_no
fiscalyear = v_fisc_year
TABLES
itemdata = i_invoice_item
NFMETALLITMS =
ACCOUNTINGDATA =
GLACCOUNTDATA = i_gla
MATERIALDATA = i_mat
TAXDATA =
WITHTAXDATA =
VENDORITEMSPLITDATA =
return = i_return.
READ TABLE i_return INTO wa_return
WITH KEY type = c_e.
IF sy-subrc EQ 0.
ENDIF.
ENDLOOP.
Reward if useful.

BAPI Function module to change the schedule agreement

Hello Experts,
Can anyone tell me Bapi function module to change the scheduling agreement,
my requirement is i will get the new AEDAT(Delivery date in schedule line)
and WMENG(Quantity) Every time customer sends me a flat file which has got
revised schedule delivery date and Quantity. It needs to be updated in my system
using a BAPI Functional Module.

Hi Vivek,
You must use the correct or most appropriate forum, so this thread will be moved from to .
The forum is dedicated to: Data Transfer Techniques, Batch Data Communication, Legacy System Migration Workbench, Application Link Enabling, IDOCs, BAPIs.
Please see the [Forum Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] before posting.
Also read this thread Welcome and Rules of Engagement.
Greetings,
Marcelo Ramos

Bapi/Fn Module for changing Routing

Similar Messages

Maybe you are looking for