BAPI for changing BP communication data

Hi,
I am trying to change BP Communication data using FM BAPI_BUPA_ADDRESS_CHANGE but it is changing
"Address-Independent" data only and not the normal communications data.
Which FM should I use ? Or are there any specific parameters which I need to pass?
Please help
Regards
Yashodha

Hi Sandy,
Thanks for the quick response. Would also appreciate if you let me know what parameters to pass? I am sending following :
IV_PARTNER: <BP Number>
IV_X_SAVE : X  (Already Defaulted)
IV_CHANGE_BAS :X (Already Defaulted)
IV_CHECK_ADDRESS : X ( Already Defaulted)
Table: IT_ADTEL
           Telephone: < New Telephone Number>
           Con         :  001
Table: IT_ADTEL_X
          T: X
          C: X
          U: U
But it is not updating the address dependent telephone number!!
Please let me know where am I missing out?
Regards,
Yashodhan

Similar Messages

  • BAPI for change PO confirmation date

    Hi,
    Does anyone know a bapi or a function module for change the confirmation date of one item of a purchase order ( that changes the field EINDT of table EKES ) ?
    I need to change it according to goods receipt date.
    Thanks in advance,
    Paulo Sousa

    you can use BAPI_PO_CHANGE
    In particular you would be interested in schedule line table POSCHEDULE in the function interface and the field for confirmation date is DELIVERY_DATE.
    Also you need to pass the BAPI some header fields like PO number etc and item fields liek material number etc along with the POSCHEDULE structure.
    Also remember to mark X in POSCHEDULEX for corresponding field POSCHEDULEX-DELIVERY_DATE, so that the change will be transferred to the PO in database.
    Also this BAPI can auto COMMIT
    Hope this helps

  • Bapi for change work center data

    HIi All
                    I need BAPI to change work center data for all categories and work center change transactions .....IR02 ,CNR2,CR02.
    Thanks in advance .

    Hai,
    Try the fm CRAP_WORKCENTER_CREATE
    BAPI_BUS2054_CHANGE_MULTI
    CRAP_WORKCENTER_CREATE
    Regards,
    Venkat

  • BAPI for Changing Applicant Master Data

    Hi,
    We are trying to access our SAP R/3 remotely for the creation and
    maintenence of Applicant Master Data. We were able to identify the BAPI
    "BAPI_applicant_create" for the creation of an applicant but are unable
    to determine the BAPI required to maintain / change applicant data. Can
    you please assist us in this regard.
    regards,
    Bilal Nazir

    Hey
    I believe since there is no BAPI available so we could use the FM. And as far it being not remote enabled, i think thats not a major problem, we can always make a copy of it and make it remote enabled.
    If anyone has any other option in mind, please do share.
    Regards
    Bilal

  • BAPI for changing delivery date and delivery time fields in LIKP table

    Hi All,
         Is there any BAPI or function module to change the delivery date and delivery time in LIKP table ?
    Please tell me experts if exists.
    Thank you,
    Raghu.

    try these:
    BAPI/FM to update LIKP and VTTK tables
    http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bapi-for-changing-sales-headertable-likp-662800

  • Can u tell me any predefined BAPI for change and creation of Material

    Hi,
        Can anybody tell me  predefined BAPI for change and creation of Materialmasterand Pricing?
    Thanks & regards,
    Gopianne.

    you can use the BAPI to BAPI_MATERIAL_SAVEDATA create as well as to change material master.
    When changing material master data, you need enter only the material
    number.
    In the header data, you must select at least one view for which data is
    to be created. Depending on the view selected, you must maintain other
    required parameters. If you do not enter values for all of the required
    parameters, the method is ended with an error message.
    The corresponding fields in the tables (such as CLIENTDATA) must first
    be supplied with data by the calling program. An indicator must also be
    set for each of these fields so that the data is written to the database
    by the method. This requires the calling program to supply the
    corresponding field with the indicator in a checkbox table (for example,
    CLIENTDATAX). Checkbox tables exist for tables that do not contain any
    language-dependent texts (MAKT, MLTX), International Article Numbers
    (MEAN), or tax classifications (MLAN). Several data records for a
    material can be created in these tables.
    regards
    vivek
    reward points if it helps

  • Suggest BAPI for change notification IW52

    Hi,
    Kindly suggest BAPI for change notification IW52.
    Regards,
    Tanaya

    How to find function module or Bapi for particular transaction in sap?
    If you mean that you need to know what BAPI's a particular tranx uses, which I can only assume that's what you mean, then you should access the code behind the transaction and search for 'CALL'. That normally is the standard method that think that most people use. 
    Suppose you want to find the bapi for creating a sales order, you usually use transaction VA01 for this. 
    1. Find out the package of the transaction. 
    Start Va01 go to system --> status. 
    Double click on transaction 
    Package is VA 
    Open this package in SE80 
    Open business engineering-->Business object types 
    Find the BO which sounds the most appropriate 
    I would suggest BUS2032 Sales Order 
    Double click. 
    Open methods. 
    Find the released method with from data or something similar in the name 
    , Createfromdat2 
    Position the cursor in it and click the program button 
    Scroll down to find the bapi used in this method 
    With this way you can also find out programs and FM's 
    2. Start va01 go to system-->status 
    Double click transaction VA01 
    Double click on package 
    Read the application component. (this is SD-SLS Sales) 
    Then open the transaction BAPI 
    Sales and distribution>Sales>sales order 
    createfromdat2 
    Answer: This is  the BAPI for your mentioned   transaction code BAPI_GOODSMVT_CREATE.
    thanks,
    Sankar M

  • BAPI for changing parked documents

    Hi ,
    I need to know any BAPI exist for changing the posting date of the parked documents.
    Please let me know if there are any BAPI's
    Thanks

    Hi,
    have a look at bapi 'BAPI_INCOMINGINVOICE_PARK'.
    i´m not sure but i guess it allows to change a parked document.
    Best regards.

  • QM Orders - Funktions/BAPI for Changing

    Dear all,
    I have to mass change the Profit Center and the Cost Center in the QM Orders.
    I can not find a function or BAPI to change the data. Can anybody give me a tip - please.
    Thanks for help.
    Best regards
    Roman

    Dear Roman
    Please check this link. I couldnt find anything to change
    Link: [Bapi for changing internal order master data]
    My recommendation will
    1) Write a program to change the costcenter and profit center  in the table
    2) You can replace the existing order by creating new QM order using the BAPI BAPI_INTERNALORDER_CREATE
    Regards
    Gajesh

  • Error: while configuring logs for changes in infotype data

    Hi All,
    I am configuring the following Tables for maintain logs for changes in infotype data.
    V_T585A, V_T585B and V_T585C
    While configuring V_T585B, when i input * in 'field name' column it gives me an warning message " All data fields in **** infotype 31 will be deleted.
    Please let me know, what does this warning message means?
    Also, How is the report RPUAUD00 read?
    Regards
    Simran

    Hi Simran,
    you are not suppose to give the IT 0031-Reference Personnel Numbers in these tables. why because this will done at the time of Employee hiring only and we don't change this. if you change you will lost the old data in the IT.
    Normally we assign only the IT which we change frequently for the master data. example like 0 1 2 7 8 9 27 582 - 589 2001 2006.
    if you are configuring today means from today on-wards any changes had made to these IT's you can see in the report. before changes will not be seen. in the report you have to choose either long-term document / short-term document and remaining fields as per the requirement.
    Regards,
    Praneeth kumar

  • BAPI to change the posting data of invoice document

    Hello All,
          I need a BAPI to change the posting date of the invoice document (Type : RE, Generated from MIRA transaction). Do let me know if you can across a BAPI to do it.
    Thanks,
    Siva.

    BAPI_INCOMINGINVOICE_CHANGE

  • BAPI for Change Customer

    Hi Experts,
    We have a requirement to change the details of a customer. We are using BAPI, "BAPI_CUSTOMER_CHANGEFROMDATA". Change is happening when we try to change details like name, But when we try to change 'country' field, we are getting error saying  "Personal address diffrent from comapany address; change not allowed"..... Can anybody help me with this,,, or can somebody suggest any other BAPI for change customer....
    Thanks and regards,
    Mahendra R

    Hi Mahendra,
    CHek the link below[using BAPI_CUSTOMER_CHANGEFROMDATA1;

  • BAPI for change documents like FB09

    Hi
    I need to change the Assignment Number (ZUONR) Field for several document positions just like FB09 ,
    Does somebody knows a BAPI for change document positions (BSEG) ?
    Regards
    Frank

    Hi,
    Please see this link, It may help you.
    Add documents to materials via BAPI
    Regards,
    Shamma

  • BAPI for "Change Base Planning Object"

    Hi
    Is there any BAPI for "Change Base Planning Object" ( TC KKE2).
    I need to change the Price of a Resource in the Cost Items for a Base Planning Object.
    So if any one know the BAPI for this topic please let me know, and if possible send me your code also it will be really help full.
    Regards

    I didn't find a BAPI to do this. I had to do it by a Batch Input.

  • BAPI for  ""Change Cost Element / Activity Input Planning ""

    Hi
    Is there any BAPI for  ""Change Cost Element / Activity Input Planning "" ( TC KP06) as there is BDC for that but is goes through lot of steps . ( TC OKKS, KP04, KP06 )
    So if any one know the BAPI for the same please let me know,  and if possible send me your code also it will be really help full.
    Regards

    o   OBJECT_INDEX - Index uniquely identifying the row and thus the           
        object. The index must be greater than zero and may only appear once     
        in the table. If the index does not exist in INDEXSTRUCTURE, the row     
        is ignored.                                                                               
    o   COSTCENTER    - Cost center that includes the activity.                                                                               
    o   ACTTYPE       - Activity type that includes the activity. You must       
        fill this together with COSTCENTER. You only need it for an activity     
        input that is activity-dependent.                                                                               
    o   CO_BUSPROC - Business process that includes the activity.                                                                               
    o   ORDERID       - Order that includes the activity.                                                                               
    o   WBS_ELEMENT  - WBS element that includes the activity                                                                               
    You may fill one object only,for example COSTCENTER, CO_BUSPROC,             
    ORDERID, or WBS_ELEMENT.                                                     

Maybe you are looking for

  • Connect a g5imac to a g4 powerbook as a second monitor

    Is this possible? I want to use the laptop as a bigger screen to aid in editing, is it possible? I have a powermac g5imac with 2 gig ram in. Thanks in advance.

  • How do you unlock your i pod touch?

    my i pod died and i charged it and then when i trurned it back on there was a lock on it and i dont know the password!!!!! how do i unlock it??

  • Posting Payment Lot using Transaction FP05 Tcode in SAP IS-U From Database

    Hi, I want to post a payment lot, using transaction FP05. It is BDC.  Data is in Database that have to be posted on SAP ISU , If anyone knows how  FP05 tcode structure please give your suggestions. So i can send the data to ISU using XI with JDBC Tha

  • Details about S_ALR_87012357

    Can any body explain in detail of the above transaction code.  It will be useful if you explain indetail about all the input and output fileds.

  • K900 closed and will not open

    k900 closed and will not open I do not get any message when I connect the charger . In the same way there is no response from the phone to the computer bağladığımda problem. What should I do . turkey over the phone , no one has information about I wo