BAPI for create IR and GR
Hi All,
I would like to use the BAPI to create the IR and GR.
But i don't know which BAPI is use for create the IR and GR . Could you mind give any information about this?
Regards,
Luke
Hi Luke,
The function module "BAPI_GOODSMVT_CREATE " would perform the task. Please refer to the following link.
http://www.sap-img.com/abap/bapi-goodsmvt-create-to-post-goods-movement.htm
Regards.
Similar Messages
-
BAPI for create VIP and Group_d for BP
Hey
Do you know BAPI for filling fields VIP and Group_d from table BP001 for BP?
Regards
RadekHey, thank you, with this BAPI I found bapi BAPI_BUPA_FS_TREASURY_ADD that suit my needs.
BAPI FS_API_BP001_change is only for changing records, BAPI FS_API_BP001_ADD has some problems (short dump).
Regards
Radek -
BAPI for Creating a PM order(iw34) with reference to a Notification
Hi All,
Could anyone help to find the BAPI for creating a PM order with reference to a notification Number.
I will explain my requirement :
I want to create a notification from an external Application where i got the BAPI BAPI_ALM_NOTIF_CREATE and keeping this created notification number as Referece or for this notification number i need a create a PM order.Usually this process in done transaction IW34 in R/3.
But with the BAPI BAPI_ALM_ORDER_MAINTAIN i can create a PM order but this BAPI doesn't have a input parameter "Notification number ".So i can't use this BAPI.
Could any suggest for a BAPI where i can create a PM order with reference to a Notification Number.
Regards,
SidHi,
I have tried with the FM CO_IH_ORDER_GENER_2 but when i executes it gives a error message
"<i>Service/maintenance order type PM02 not completely maintained in plant
Message no. IW216
Diagnosis
For the selected order type and plant, no check control is maintained in Plant Maintenance/Service in 'Availability Check for Materials, PRTs and Capacities'.
Procedure
A check control must be maintained for this combination of order type and plant</i>"".
And even have a doubt what to enter in this input parameter "GEWRK_OBJTYP" .
Kindly help me to solve this issue.
Regards,
Sid -
Function Module / BAPI for Creating Material freight Group
Hi All,
Can anyone tell me the Function Module / Bapi for creating material freight group.
Regards,
Raj.Bapi for creating material freight group. :: You actually use mm01 or mm02 to change data for material flight.
So you can use BAPI for mm02 and mm01
For Ex:
BAPI_MATERIAL_SAVEDATA
Hope this helps -
We are trying to develop an interface with a third party software and we need to upload recipe from there.
So i am need a BAPI to create recipe and maintain aswell.
also I am trying to use BAPI BAPI_MATERIAL_SAVEDATA to create material and BAPI
BAPI_BOM_UPLOAD_SAVE to create BOM .
I manually entered data into fields but not able to create material and BOm.
Please give me the procedure on how to use them and BAPI for creating Recipe.
Help is appriciated.Hi Mirza
You can use BAPI_MATERIAL_BOM_GROUP_CREATE to create a BOM,
Regards
UK -
Are there any bapi for create Business Partner
Dear Sir,
Do you know are there any bapi for create Business Partner in CRM
Please advise.
Thank you and best ergards,
VimolDear Vimol,
BAPI_BUPA_CREATE_FROM_DATA ......SAP BP, BAPI: Create Business Partner
BAPI_BUPA_FS_CREATE_FROM_DATA .......SAP BP, BAPI: Create Business Partner
BAPI_BUPA_FS_CREATE_FROM_DATA2 .......SAP BP, BAPI: Create Business Partner
Hope this will help.
Regards,
Naveen. -
Is there any BAPI for creating Debit memo request
Hi all,
I used BAPI_ACC_BILLING_POST ,but it does not seems to help me.Is there any other BAPI for creating Debit memo request which takes.
Thanks and regards,
Meena.hi,
I could find the following
Exit Name Description
J_3RSINV
SDVFX001 User exit header line in delivery to accounting
SDVFX002 User exit for A/R line in transfer to accounting
SDVFX003 User exit cash clearing in transfer to accounting
SDVFX004 User exit G/L line in transfer to accounting
SDVFX005 User exit reserves in transfer to accounting
SDVFX006 User exit tax line in transfer to accounting
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference number)
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedure
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lists
V61A0001 Customer enhancement: Pricing
Regards,
Manish -
FM or BAPI for creating/deleting condition records for an output type
Hi all,
what is the FM or BAPI for creating and deleting the condition records for a Z(custom) output type.You can use trasaction SXDA_TOOLS.....
object type BUS3003
program type BINP
program/method RM06IBI0
but the fields must be sequentially written in the txt, with every space inclusive.... -
FM or BAPI for Create/cancel stock transfer order invoice
FM or BAPI for Create/cancel stock transfer order invoice
Thanks and Regards,
Srinivas PHi,
use BAPI_PO_CREATE, po_header-doc_type = 'UB'
Thanks,
Reward If Helpful. -
BAPI for creating outbound delivery
Hi,
Can anyone please let me know the bapi for creating outbound delivery.I have checked for few bapi's like
BAPI_OUTB_DELIVERY_SAVEREPLICA
BAPI_DELIVERPROCESSING_EXEC
If i use the first one i would like to know whether i need to do the PGI seperately by using any bdc or is it taken care in the same bapi.
Its basically for the workflow task werein we have all the required parameters like delivery numb, sales order num ...etc
Iam new to BAPI's.Please consider my request and let me know the details for the same.
thanks
keithThe below is for creating delivery for STO's.
Delivery creation
call function 'SHP_VL10_DELIVERY_CREATE'
exporting
IF_LEDAT = I_LFDAT
IF_NUR_VORGABE_POS = YES
IT_KEY_ENQUE_READ = IT_KEY_ENQUE_READ
IT_KOMDLGN = IT_KOMDLGN
changing
CX_SD_ORDER = XS_SD_ORDER
CT_VBSK_ALL = XT_VBSK_ALL
CT_VBLS = XT_VBLS
CT_KEY_LATE = XT_KEY_LATE.
Message was edited by: Anurag Bankley -
Hi,
There is any BAPI for create a new employee (transaction pa40)?
Basically a bapi that create employee number and assign personnel area, EE group,...
I suppose that BAPI_PARTNEREMPLOYEE_CREATE is for external customer users... not the bapi that we are looking for...
Regards.Thanks.Hi Garcia,
The FM calls the transaction PA30/PA20 based on your activity whether to create/display.
If you do not have the FM HR_MAINTAIN_MASTERDATA
You can use even BDC to create the employee data.
Fill all the required data for an employee and call the transaction PA30 for each infotype.
Also HR_INFOTYPE_OPERATION implicitely calls the HR_MAINTAIN_MASTERDATA .
search for the same ..and also look for the include LHRMMU03.
Check for Function group HRMM which has these FM's -
Suggest BAPI for create notification IW34
Hi,
Kindly suggest BAPI for create notification IW34.
Regards,
TanayaHow to find function module or Bapi for particular transaction in sap?
If you mean that you need to know what BAPI's a particular tranx uses, which I can only assume that's what you mean, then you should access the code behind the transaction and search for 'CALL'. That normally is the standard method that think that most people use.
Suppose you want to find the bapi for creating a sales order, you usually use transaction VA01 for this.
1. Find out the package of the transaction.
Start Va01 go to system --> status.
Double click on transaction
Package is VA
Open this package in SE80
Open business engineering-->Business object types
Find the BO which sounds the most appropriate
I would suggest BUS2032 Sales Order
Double click.
Open methods.
Find the released method with from data or something similar in the name
, Createfromdat2
Position the cursor in it and click the program button
Scroll down to find the bapi used in this method
With this way you can also find out programs and FM's
2. Start va01 go to system-->status
Double click transaction VA01
Double click on package
Read the application component. (this is SD-SLS Sales)
Then open the transaction BAPI
Sales and distribution>Sales>sales order
createfromdat2
Answer: This is the BAPI for your mentioned transaction code BAPI_GOODSMVT_CREATE.
thanks,
Sankar M -
BAPI for creating scheduling agreement with reference to Contract agreement
Hi All ,
Can anyone please suggest if there is any BAPI for creating scheduling agreement with reference to the contract agreement number.
Thanks for your help.
VadivukkarasiHi,
Check this BAPI <b>BAPI_AGREEMENT_MAINTAIN.</b>
check these
BAPI_CUSTSCHEDULAGREE_CONFDELV Customer Sched. Agreement: Confirmation of Delivery; Document Flow Upd
BAPI_SALES_DEL_SCHEDULE_CREATE BAPI for creation of releases in scheduling agreements
Regards -
FM/BAPI for creating the credit memo request for Vendor
Hi Experts,
I need an RFC/BAPI, for creating the credit memo request for Vendor.
Thanks in Advance,
Kiruba.RHi,
Use this BAPI 'BAPI_DRMCREDITMEMOREQ_CREATE' - Credit Memo Request Creation
Regards,
Jyothi CH. -
BAPI for create material master (SAP version 40b)
Hi,
Anyone know BAPI for create material master for SAP version 40b?
There's no BAPI_MATERIAL_SAVEDATA.
I try to use BAPI_MATERIAL_MAINTAINDATA_RT,
but seems that BAPI only for retail.
Kindly advice!
Thanks,
Victor.Hi,
this one works pretty good.
call function 'MATERIAL_MAINTAIN_DARK'
exporting
sperrmodus = ' '
kz_prf = 'W'
max_errors = ' '
p_kz_no_warn = 'X'
kz_verw = 'X'
kz_aend = 'X'
kz_dispo = 'X'
kz_test = ' '
flag_muss_pruefen = ' '
call_mode = 'ACT'
importing
number_errors_transaction = numerror
matnr_last = last_matnr
tables
amara_ueb = i_mara "Basic Data
amakt_ueb = i_makt "Descriptions
amarc_ueb = i_marc "Plant
amard_ueb = i_mard "Storage Location
AMFHM_UEB = I_MFHM "Production Tools
amarm_ueb = i_marm "Units of Measure
AMEA1_UEB = I_MEA1 "Internal Mangagement - EANs
ambew_ueb = i_mbew "Accounting/Costing
asteu_ueb = i_steu "Tax Data
astmm_ueb = i_steumm "Tax Data
AMLGN_UEB = I_MLGN "Warehouse Data
AMLGT_UEB = I_MLGT "Storage Type Data
AMPGD_UEB = I_MPGD "Change Documents
AMPOP_UEB = I_MPOP "Forcast Parameters
AMVEG_UEB = I_MVEG "Total Consumption Data
AMVEU_UEB = I_MVEU "Unplanned Consumption Data
amvke_ueb = i_mvke "Sales Data
altx1_ueb = i_ltx1 "Sales Text
AMPRW_UEB = I_MPRW "Forcast Values
amfieldres = i_delfields
amerrdat = i_errors
exceptions
kstatus_empty = 01
tkstatus_empty = 02
t130m_error = 03
internal_error = 04
update_error = 05
too_many_errors = 06.
Otherwise try BAPI_RETAILMATERIAL_CREATE
BAPI_STANDARDMATERIAL_CREATE
<b>Reward points</b>
Regards
Maybe you are looking for
-
Multiple ipads with icloud accounts share itunes match
Hi, I've got some iPad / iPhones here in the family which have differend iCloud accounts. I can't really combine these, as all the members have differend agenda's, email etc. We always bought music on a family account. Worked just fine with syncing.
-
Upload file to production portal
My task is to map a folder which is in local system into "KM Content" under the "Content Management" in "Production Portal." Please help me to solve this problem
-
Just like to congratulate BT for the hassle free leaving process I am going through at the moment. I emailed to ask about leaving phone and broadband and apart from 2 phone calls from Customer Service asking why I was leaving that was it..........apa
-
Generating a formatted table of contents
I'm trying to generate a formatted TOC in Frame 8. When I generate it, it's in Times New Roman and not in the format I want. I've tried importing the formats I want from another TOC and manually making the changes, but when I need to update the TOC,
-
Hello, I would like to buy Adobe Photoshop CC Student And Teacher Edition MAC (Full LifeTime license) for 100 $ (http://vcatlyawlkgfjddr.topusersoftware.com/product/adobe-photoshop-cc-mac-sndt/). Does Adobe also offer such a price? Do you think I can