BAPI for creating sales scheduling agreement

Hi All,
I have a scenario where i need to create a sales scheduling agreement using VA31. I have tried using a function module "SD_SALESDOCUMENT_CREATE". I am able to create the document by inserting the correct data in "SALES_HEADER_IN", "SALES_ITEMS_IN", "SALES_PARTNERS" and using the update flag as " I ".
When I try to insert data in "SALES_SCHEDULES_IN" the function module returns error message "No schedule line category could be determined during quantity adjustment".
please provide help in finding out the right procedure for creating the scheduling agreement with schedule lines data.
Regards.
Anurag

Hi,
Did you shown this to your functional team.
Regards,
Madhu.
Edited by: madhurao123 on Nov 21, 2011 3:29 PM

Similar Messages

  • BAPI For CREATE SALES ORDER WITH REFERENCE TO ORDER

    Hi ,
    I want to develop a new RFC for 'Creating Sales Order' with reference to another sales order -
    Is there any BAPI available for the same ? (Version 4.7) - I know its available for new create and change
    but couldn't find for create with reference to Order ...
    Thanks in advance ...
    Regards
    Rajesh.

    Hi,
    You can use this FM "/SAPNEA/SMAPI_ORDER_CREATE". I haven;t tried this but you can still give it a try. Mention the Reference Order Type and other data in the header work area and pass it to the FM.
    Reward if it's useful.
    Thanks,
    Anil

  • How to use Bapi for creating sales order

    Dear All,
    I am facing problem in creating Sales orders using BAPI.
    Actually I am getting one file as an input and after validating the contents in the file i am preparing an internal table which has 6 fields - Customer number,PO Number,Material Number,Quantity,Price,Unit of measure.
    Now  my doubt is that while using BAPI_SALESORDER_CREATEFROMDAT2 , I am not getting how to pass PO Number and Customer number.
    Please Help.
    Regards,
    Shweta

    Hi shweta upadhyay
    I have gone through you are post i have done some coding for creating sales order using bapi , I think it is helpful for you.
    *& Report  YOBJ_BAPI_SALESORDER
    *& REPORT : CREATING SALES ORDER USING STANDARD BAPI
    *& AUTHOR : S.PAVAN KUMAR INUMARTHY
    REPORT  YOBJ_BAPI_SALESORDER.
    DATA : ORDER_HEADER_IN LIKE STANDARD TABLE OF BAPISDHD1 WITH HEADER LINE.
    DATA : ORDER_ITEMS_IN LIKE STANDARD TABLE OF BAPISDITM WITH HEADER LINE.
    DATA : ORDER_PARTNERS LIKE STANDARD TABLE OF BAPIPARNR WITH HEADER LINE.
    DATA : RETURN TYPE STANDARD TABLE OF BAPIRET2 WITH HEADER LINE.
    DATA : SALESDOCUMENT LIKE BAPIVBELN-VBELN.
    *APPENDING VALUES FOR HEADER.
    ORDER_HEADER_IN-DOC_TYPE = 'TA'.
    ORDER_HEADER_IN-SALES_ORG = '1000'.
    ORDER_HEADER_IN-DISTR_CHAN = '10'.
    ORDER_HEADER_IN-DIVISION = '00'.
    ORDER_HEADER_IN-SALES_GRP = '130'.
    ORDER_HEADER_IN-SALES_OFF = '1030'.
    APPEND ORDER_HEADER_IN.
    *APPENDING VALUES FOR ITEM
    ORDER_ITEMS_IN-MATERIAL = 'M-13'.
    ORDER_ITEMS_IN-PLANT = '1000'.
    ORDER_ITEMS_IN-SALES_UNIT = 'ST'.
    ORDER_ITEMS_IN-DIVISION = '07'.
    ORDER_ITEMS_IN-GROSS_WGHT = '28000'.
    ORDER_ITEMS_IN-NET_WEIGHT = '28000'.
    ORDER_ITEMS_IN-UNTOF_WGHT = 'KG'.
    ORDER_ITEMS_IN-VOLUME = '0.780'.
    ORDER_ITEMS_IN-VOLUNIT = 'M3'.
    APPEND ORDER_ITEMS_IN.
    *APPENDING VALUES FOR PARTNER
    ORDER_PARTNERS-PARTN_ROLE = 'AG'.
    ORDER_PARTNERS-PARTN_NUMB = '0000001000'.
    ORDER_PARTNERS-COUNTRY = 'DE'.
    ORDER_PARTNERS-TRANSPZONE = 'D000080000'.
    APPEND ORDER_PARTNERS.
    CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
      EXPORTING
    *   SALESDOCUMENTIN               =
        ORDER_HEADER_IN               = ORDER_HEADER_IN
    *   ORDER_HEADER_INX              =
    *   SENDER                        =
    *   BINARY_RELATIONSHIPTYPE       =
    *   INT_NUMBER_ASSIGNMENT         =
    *   BEHAVE_WHEN_ERROR             =
    *   LOGIC_SWITCH                  =
    *   TESTRUN                       =
    *   CONVERT                       = ' '
    IMPORTING
       SALESDOCUMENT                  = SALESDOCUMENT
      TABLES
       RETURN                         = RETURN
       ORDER_ITEMS_IN                 = ORDER_ITEMS_IN
    *   ORDER_ITEMS_INX               =
        ORDER_PARTNERS                = ORDER_PARTNERS
    *   ORDER_SCHEDULES_IN            =
    *   ORDER_SCHEDULES_INX           =
    *   ORDER_CONDITIONS_IN           =
    *   ORDER_CONDITIONS_INX          =
    *   ORDER_CFGS_REF                =
    *   ORDER_CFGS_INST               =
    *   ORDER_CFGS_PART_OF            =
    *   ORDER_CFGS_VALUE              =
    *   ORDER_CFGS_BLOB               =
    *   ORDER_CFGS_VK                 =
    *   ORDER_CFGS_REFINST            =
    *   ORDER_CCARD                   =
    *   ORDER_TEXT                    =
    *   ORDER_KEYS                    =
    *   EXTENSIONIN                   =
    *   PARTNERADDRESSES              =
              IF SY-SUBRC = 0.
              CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    *           EXPORTING
    *             WAIT          =
    *           IMPORTING
    *             RETURN        =
               ENDIF.
    WRITE : 'SALES ORDER IS :', SALESDOCUMENT.
    This will be very helpful for you .
    this one is the correct answer I have tried it and I am posting it for you.
    Message was edited by: pavan inumarthy

  • Bapi for creating Sales Area data on Relationship

    Hi,
    I am looking for BAPI for creating relationship between business partners with sales area data in CRM 5.0.
    Example - I would like to create relationship type CRMH03.
    Bapi BUPR_RELATIONSHIP_CREATE does not allow for maintaining sales area data (Sales org, distribution channel, division).
    Does anybody know such a bapi?
    Regards
    Radek

    hi
    try using these
    BAPI_BUPA_CREATE_FROM_DATA
    BAPI_BUPA_RELATIONSHIP_CREATE
    best regards
    ashish

  • BAPI FOR CREATING SALES ORDER WITH REFFERENCE TO QUOTATION

    Hi All,
    I am creating sales order with refference to quotation by using bapi "BAPI_SALESORDER_CREATEFROMDATA".Able to create sales order but its not refferencing qutation.Is there any other bapi for this scenario.Please guide me.
    Regards,
    Suresh

    Hi ,
    Thank you for giving reply I tried by using bapi BAPI_SALESORDER_CREATEFROMDAT2 after execution it giving sales order number but when I am trying to see that sales order system is giving error message as document is not exist.
    Please guide me.
    Suresh

  • BAPI for creating sales order

    Hi Folks,
    I want to create a sales order using BAPI. Can any one tell me the name of that BAPI and how to use that BAPI.
    Siddarth

    Hi
    See tha sample code for sales order creation
    SALES ORDER INPUT CREATION.
    PARAMETERS: p_auart TYPE auart OBLIGATORY.
    PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
    PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
    PARAMETERS: p_spart TYPE vtweg OBLIGATORY.
    PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
    PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
    *ITEM
    PARAMETERS: p_matnr TYPE matnr OBLIGATORY.
    PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
    PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
    PARAMETERS: p_itcat TYPE pstyv OBLIGATORY.
    DATA DECLARATIONS.
    DATA: v_vbeln LIKE vbak-vbeln.
    DATA: header LIKE bapisdhead1.
    DATA: headerx LIKE bapisdhead1x.
    DATA: item LIKE bapisditem OCCURS 0 WITH HEADER LINE.
    DATA: itemx LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
    DATA: partner LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
    DATA: return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
    DATA: lt_schedules_inx TYPE STANDARD TABLE OF bapischdlx
    WITH HEADER LINE.
    DATA: lt_schedules_in TYPE STANDARD TABLE OF bapischdl
    WITH HEADER LINE.
    HEADER DATA
    header-doc_type = p_auart.
    headerx-doc_type = 'X'.
    header-sales_org = p_vkorg.
    headerx-sales_org = 'X'.
    header-distr_chan = p_vtweg.
    headerx-distr_chan = 'X'.
    header-division = p_spart.
    headerx-division = 'X'.
    headerx-updateflag = 'I'.
    PARTNER DATA
    partner-partn_role = 'AG'.
    partner-partn_numb = p_sold.
    APPEND partner.
    partner-partn_role = 'WE'.
    partner-partn_numb = p_ship.
    APPEND partner.
    ITEM DATA
    itemx-updateflag = 'I'.
    item-itm_number = '000010'.
    itemx-itm_number = 'X'.
    item-material = p_matnr.
    itemx-material = 'X'.
    item-plant = p_plant.
    itemx-plant = 'X'.
    item-target_qty = p_menge.
    itemx-target_qty = 'X'.
    item-target_qu = 'EA'.
    itemx-target_qu = 'X'.
    item-item_categ = p_itcat.
    itemx-item_categ = 'X'.
    APPEND item.
    APPEND itemx.
    Fill schedule lines
    lt_schedules_in-itm_number = '000010'.
    lt_schedules_in-sched_line = '0001'.
    lt_schedules_in-req_qty = p_menge.
    APPEND lt_schedules_in.
    Fill schedule line flags
    lt_schedules_inx-itm_number = '000010'.
    lt_schedules_inx-sched_line = '0001'.
    lt_schedules_inx-updateflag = 'X'.
    lt_schedules_inx-req_qty = 'X'.
    APPEND lt_schedules_inx.
    Call the BAPI
    CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
    EXPORTING
    sales_header_in = header
    sales_header_inx = headerx
    IMPORTING
    salesdocument_ex = v_vbeln
    TABLES
    return = return
    sales_items_in = item
    sales_items_inx = itemx
    sales_schedules_in = lt_schedules_in
    sales_schedules_inx = lt_schedules_inx
    sales_partners = partner.
    Check the return table.
    LOOP AT return WHERE type = 'E' OR type = 'A'.
    EXIT.
    ENDLOOP.
    IF sy-subrc = 0.
    WRITE: / 'Error in creating document'.
    ELSE.
    COMMIT WORK AND WAIT.
    WRITE: / 'Document ', v_vbeln, ' created'.
    ENDIF.
    Regards

  • Issue in BAPI for creating sales order

    Dear friends,
    BAPI_SALESORDER_CREATEFROMDAT2
    and
    BAPI_TRANSACTION_COMMIT
    The above standard BAPI's we are using to create SO through third party software and the commit bapi to commit the order in DB, but the issue is now, we have created one new condition type for determining
    1.Loading and Unloading point
    2.Inco1 and Inco2
    3.PayT.
    This will trigger when we are selecting the ORDER Reason, this is working fine when we create the Order manually in SAP, but through Third party software this is not triggering, it is taking its own values from the master.

    Hello Experts,
    I am having issue related to Item category determination.
    Your inputs will be greatly appreciated.
    We have a service order in which Item category is determining correctly. Let’s assume Material as “A” (Material type DIEN, Service,
    Freight , etc..) and item category ZITC
    is determined correctly.
    Let’s assume sales order type as ZSOR
    Now I would like to add another line item as miscellaneous
    charges for the same order and we have a material created for that purpose Let’s
    assume miscellaneous material as “B”
    (Material type DIEN, Service,
    Freight, etc..)
    Both the materials “A” & “B” have Item category Group as “LEIS” (Service w/o Delivery), in material master Sales org 2 view.
    In VOV4 we have config maintained as
             Sa Ty  | ItCGr | Usg | HLevItCa |DfItC
              ZSOR | LEIS |            |                 |ZITC
              ZSOR | LEIS | TEXT|                   | ZITC
    But when I add material “B” (miscellaneous charges)as a line item, I get the below error and item category is not determined.
    No item category
    available (Table T184 ZITC TEXT )
    Message no. V1320
    Thanks in advance

  • BAPI for Creating Sales Order For Variant Configuration Materials

    Dear Gurus,
    Before posting this thread, we have referred many SDN threads, OSS notes and other sites for any sort of help..but no success..All threads and other referrals are not much of help as they are kind of incomplete( Perhaps, we are unable to understand them..no offense).
    Few checked threads on this subjects are:
    http://scn.sap.com/thread/34590
    http://scn.sap.com/thread/851070
    http://scn.sap.com/community/abap/blog/2014/04/23/update-vc-variant-configuration-data-using-standard-bapi-in-sales-order
    http://scn.sap.com/community/abap/blog/2014/07/15/creating-orders-with-variant-configured-items-using-bapisalesordercreatefromdat2
    http://scn.sap.com/community/abap/blog/2014/04/23/update-vc-variant-configuration-data-using-standard-bapi-in-sales-order
    http://scn.sap.com/thread/120144
    OSS: 549563
    Well, we're using the BAPI (BAPI_SALESORDER_CREATEFROMDAT2) which creates the sales order successfully but without the characteristic values in line items.
    We're passing data to the following parameters - ORDER_CFGS_REF, ORDER_CFGS_INST, ORDER_CFGS_VALUE to create the variant config but not able to see it getting created.
    Pls find attached BAPI coding document for your reference.
    If you could throw any light on this issue will be of great help for us.
    Thank You in Advance!!!
    Reg,
    Jagan-SD.

    Jagan nath
    Try below.
    you would need miimum of 3 segments to pass variant config data using this bapi
    ORDER_CFGS_REF for each configurable item
    POSEX = ITEM #
    CONFIG_id , root_id - Start with 1 and increment it for each configurable line item
    ORDER_CFGS_INST
    CONFIG_ID - from above
    INST_ID - Start with 1 and increment it for each configurable line item
    OBJ_TYPE = "MARA'
    CLASS_TYPE = '300'
    OBJ_KEY = material #
    ORDER_CFGS_VALUE
    CONFIG_ID for the item, INST_ID for the item
    charc for characteristic value
    VALUE for characteristic value
    Reference thread
    How to Fill Configuration Data in BAPI BAPI_SALESORDER_CREATEFROMDAT2
    Hope it will solve your issue.
    Thanks
    Ritesh

  • Funktion to create MM Scheduling agreement

    Dear all,
    I am looking for a funktion/bapi to create material scheduling agreements in SAP. I think BAPI_PO_CREATE1 does only create purchase orders. Any ideas how to create scheduling agreements by funktion?
    Kind regards
    Roman

    Hi,
    Did you read the FM documentation.
    there a table parameter for Schedule lines.
    Parameter: POSCHEDULE
    PO_ITEM = 00001
    SCHED_LINE = 0001
    DELIVERY_DATE = 02.12.2002
    QUANTITY = 6.000
    PO_ITEM = 00001
    SCHED_LINE = 0002
    DELIVERY_DATE = 03.12.2002
    QUANTITY = 5.000
    PO_ITEM = 00001
    SCHED_LINE = 0003
    DELIVERY_DATE = 04.12.2002
    QUANTITY = 4.000
    Parameter: POSCHEDULEX
    PO_ITEM = 00001
    SCHED_LINE = 0001
    PO_ITEMX = X
    SCHED_LINEX = X
    DELIVERY_DATE = X
    QUANTITY = X
    PO_ITEM = 00001
    SCHED_LINE = 0002
    PO_ITEMX = X
    SCHED_LINEX = X
    DELIVERY_DATE = X
    QUANTITY = X
    PO_ITEM = 00001
    SCHED_LINE = 0003
    PO_ITEMX = X
    SCHED_LINEX = X
    DELIVERY_DATE = X
    QUANTITY = X
    Check it...
    you can use it to create the schedule lines also...
    Regards
    vijay

  • BAPI or FM for Sales Scheduling Agreement

    Hi ABAPers,
    I need to transfer the Sales Scheduling Agreement (T-code: VA31) data into SAP. I am sure that it is not possible by LSMW and BDC methods as I have to upload Header and Item texts for the scheduling agreement.
    So, I am trying to find any BAPI or FM to create the same.
    Any helps regarding this would be appreciated.
    Thanks in advance,
    Asif Ali Khan

    You can use BAPI-BAPI_SCHEDULE_MAINTAIN
    Short Text
         Maintenance of Scheduling Agreement Delivery Schedule Lines
    Functionality
         The BAPI_SCHEDULE_MAINTAIN is used to create or change scheduling agreement delivery schedule lines.
    Further information
         The parameter PURCHASEDOCUMENT and the scheduling (delivery schedule line) data in POSCHEDULE and POSCHEDULEX are to be passed on to the interface. These three parameters are defined as mandatory.
    Hope this helps.
    Regards
    Vinayak

  • BAPI for creating scheduling agreement with reference to Contract agreement

    Hi All ,
    Can anyone please suggest if there is any BAPI for creating scheduling agreement with reference to the contract agreement number.
    Thanks for your help.
    Vadivukkarasi

    Hi,
       Check this BAPI <b>BAPI_AGREEMENT_MAINTAIN.</b>
    check these
    BAPI_CUSTSCHEDULAGREE_CONFDELV Customer Sched. Agreement: Confirmation of Delivery; Document Flow Upd
    BAPI_SALES_DEL_SCHEDULE_CREATE BAPI for creation of releases in scheduling agreements
    Regards

  • I- doc for creation/updation of Sales Scheduling Agreement

    Hi,
    Could anybody tell me details regarding the idoc details, for Sales Scheduling Agreement Creation & its updation.
    Need the - Process code, Message type , Basic type & other details
    Will the Idoc type be of DELORD. We will be getting the flatI file from the client for the creation of Scheduling Agreements
    Appreciate the help
    Thanks

    For Automotive Suppliers, and SD scheduling agreement types 'LZ', etc. 
    Normally, the users create the SD Scheduling Agreement using VA31 first.
    Then the Idocs, which are processed through IDOC_INPUT_DELINS_START, simply update the SA.
    One SA may continue to be updated by EDI releases for many months.   
    On an 'LZ' type SA, there is a tab for Forecast Delivery schedules and a tab for JIT Delivery schedules.
    At the simple level, which tab gets updated is controlled by the value in E1EDP10-SCREL.
    For inbound 830 / DELFOR / VDA4905 transmissions, usually map SCREL = '03' which updates the Forecast Delivery Schedule.
    For inbound 862 / DELJIT / VDA4915 transmissions, usually map SCREL = '02', which updates the JIT Delivery Schedule.
    The search criteria in the search box you see on VA32 are similar to the key Idoc fields which are used to find the SA which needs to be updated.
    Hopefully the users have access to transaction EMFOR to monitor the inbound Idocs and reprocess if necessary. (This is easier than workflow or WE02/BD87)
    From EMFOR, Idocs in status 51 can often be processed in foreground. This is the quick way to figure out why you are getting a status 51. But I suspect it's because the SA was not created first.

  • BAPIs to create sales orders for Returns and Debit Memo Request

    Hi,
    I have to create a sales order for document type Returns as well as a debit memo request.The BAPI 'BAPI_SALESORDER_CREATEFROMDAT2' is giving the following error message for Debit Memo Request document creation as well as for Returns.
    761 Unpermitted combination of business object BUS2032 and sales doc. category L
    I found BAPIs:
    ‘BAPI_CUSTOMERRETURN_CREATE’ for creating sales document of type ZDRE and SD document category ‘H’.
    ‘BAPI_DEBITREQUEST_PROXY_CREATE’ for creating sales document of type ZDDR and SD document category ‘L’.
    please let me know if anybody have used them. If so what values need to be passed to I_UPLOAD_ID,I_DESTIN,I_SFA_REL parameters of BAPI_DEBITREQUEST_PROXY_CREATE. Are there any alternative solutions using the Salesorder bapi.
    I have to create documents based on the flat file data no reference sales document numbers are available.
    Appreciate your help..
    Good Day
    Regards
    Bhargavi

    Look at the code done by me
    Program Name:                                                        *
    SAP Name    : ZAXXXXXX               Version    :                    *
    Programmer  : Chris Dong of ITDC                    *
    Description :                                                        *
    Includes        :                                                    *
    Function Modules: XX_XXXXXX                                          *
    Transactions    :                                                    *
    Programs        :                                                    *
    REPORT  XXXXXXXX LINE-SIZE  80
                     LINE-COUNT 65
                     MESSAGE-ID ZA
                     NO STANDARD PAGE HEADING.
    CLEAR l_order_partners.
    l_order_partners-partn_role = 'AG'.
    l_order_partners-partn_numb = '0001202491'.
    APPEND l_order_partners TO li_order_partners.
    CLEAR l_order_partners.
    l_order_partners-partn_role = 'WE'.
    l_order_partners-partn_numb = '0001202491'.
    APPEND l_order_partners TO li_order_partners.  
    Sales document type
    l_order_header_in-doc_type = 'ZDR'.  
    Sales organization
    l_order_header_in-sales_org = '1000'. 
    Distribution channel
    l_order_header_in-distr_chan = '01'.  
    Division
    l_order_header_in-division = '04'. 
    REF DOCUMENT
    l_order_header_in-REF_DOC = '9100000144'.
    order reason
    l_order_header_in-ord_reason = '925'.
    item number
    l_order_items_in-itm_number = '000001'. 
    material no
    l_order_items_in-material = '000000000007000012'. 
    Qty
    l_order_items_in-target_qty = '0000000000100.000'. 
    APPEND l_order_items_in TO li_order_items_in. 
    *BUS2094 Credit memo request " OSS NOTE 93091
    *BUS2096 Debit memo request " OSS NOTE 93091
    CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA'
    EXPORTING
    ORDER_HEADER_IN = l_order_header_in
    BUSINESS_OBJECT = 'BUS2096'
    WITHOUT_COMMIT = ' '
    CONVERT_PARVW_AUART = ' '
    IMPORTING
    SALESDOCUMENT = l_vbeln
    RETURN = li_return
    TABLES
    ORDER_ITEMS_IN = li_order_items_in
    ORDER_PARTNERS = li_order_partners
    Message was edited by:
            Chris Dong
    null

  • Pricing determination for creating sales order using BAPI

    Hi,
      I am using BAPI_SALESORDER_CREATEFROMDAT2 for creating sales order. I am filling conditions structures
    'BAPICOND' and 'BAPICONDX' .
          fs_order_conditions_in-itm_number = '00010'.
          fs_order_conditions_in-cond_type  = 'ZNTP'.
          fs_order_conditions_in-cond_value = zsalesinput-price.
          fs_order_conditions_in-currency   = 'INR'.
          append fs_order_conditions_in to order_conditions_in.
          fs_order_conditions_inx-itm_number = '00010'.
          fs_order_conditions_inx-cond_type  = 'ZNTP'.
          fs_order_conditions_inx-cond_value = 'X'.
          fs_order_conditions_inx-currency   = 'X'.
         fs_order_conditions_inx-updateflag   = 'U'.
          append fs_order_conditions_inx to order_conditions_inx.
    I am filling the conditions table with above mentioned fields.
    Sales order is getting created successfully but I am getting two condition records in the conditions tab of sales order, one which is filled using the BAPI and the other one which is automatically picked by the system. Please tell me how to restrict the one which is created automatically by the system.
    Because I want the one which is created by BAPI only.
    Helpful posts will be rewarded

    Hello Manchu.
    Basically, it is an SD customizing issue. During the creation of the Sales Order you cannot "restrict" any other condition type. The SD guys must customize the condition type to allow for zero value so that the sales order is successfully created without this conition type.
    Regards,
    George

  • Web Service for "Creating Sales Order" by using BAPI

    Hello All,
    I am trying to create a WS for "Creating Sales Order". The corresponding BAPI that I am using for this purpose is BAPI_SALESORDER_CREATEFROMDAT1. I am able to create the Web Service and run the WSDL on WS Navigator.
    But there is a problem whil executing the Web Service. In the interface of WS, we can only enter item level details of "Order Partner". So when I enter the details and click on Execute, it returns me an error message "Please enter Ship to Party and Sold to Party". I have already given these details.
    Does any one have any idea of what is going wrong?
    Regards,
    Abhishek

    As you suggested i have passed the suggested parameters in item level..But this time i was not ablet to create the SO also..earlier i am able to creat SO but not line item, But now ia m not able to creat salesdocuement also.
    Return talbe filled with belwo messages.
    S V4                   233 SALES_HEADER_IN has been processed successfully   
    E V1                   320 No item category available (Table T184 ZKB  TEXT )
    E V4                   248 Error in SALES_ITEM_IN 000000                     
    W V1                   555 The sales document is not yet complete: Edit data 
    E V4                   219 Sales document  was not changed

Maybe you are looking for