Bapi for creation of a contract against services.
Hi.
i just want to know the correct bapi for creation of contracts against services..here i was tried with BAPI_CONTRACT_CREATE but the documentation says that it is not supported for exxternal or internal services.
so iam not sure if this bapi is the one for contract creation for services.
any way i was tried to test this function module but i havent got Contract created.
wil be waiting for an excellent answer.
bye.
reegards.
seetaram.
Hi Ram,
Try the function module
BAPI_CONTRACT_CREATEFROMDATA.
Once you create the contract, update the technical objects for the contracts
using two function modules called one after another.
IWOL_WV_ADD_OBJECTS
IWOL_WV_POST_OBJECT_LIST
Regards,
Chandra Sekhar
Similar Messages
-
Standard remote enabled bapi for creation of purchaser contract in srm
Hello Friends
Plz tell me is there any standard,remote enabled FM/BAPI in SRM system for creation of purchaser contract.
I found BBP_PD_CTR_CREATE. But this is normal FM.
I need BAPI like BAPI_CONTRACT_CREATE which there in ECC system.
Plz help.
Thanks & regards,One idea is to write a wrapper FM that is remote enabled and internally call BBP_PD_CTR_CREATE for your own use.
-
BAPI for Creation of inspection lot
I have two scenario:-
1.Can any body help to find BAPI for creation of Inspection lot for the material under PO envisaged for PDI.
2. Can any body find me a BAPI or FM which can creates inspection lot in QALS table without inspection lot origin under 01 i.e. 0101 or Z01SI01.
My objective is to creation inspection lot without assigning Inspection type of Z01SI01 or Z01SI02 and so on in the material code under a respective Plant 1004 or 1005 0r 1006 so on.
In my Z Development for creation of inspection lot BDC is run for QA01 as this code created inspection lot on when material code has inspection type Z01SI01 i.e. location of source inspection and vendr code particular classification under 010 vendor class inspection type Z01SI01. System search both the inspection type for both material and vendor then create inspection lot in QALS table by assiging inspection matching inspection on the lot.
I want to get rid of assignment of inspection on the materilal. If any BAPI or FM is avalable for creation of inspection without assigning inspection type on material code. I want to create inspection lot in which Inpsection type assignment can be done based on vendor class only.
YPB2. Can any body find me a BAPI or FM which can creates inspection lot in QALS table without inspection lot origin under 01 i.e. 0101 or Z01SI01.
I am very sure that this is not possible.You can not create inspection lot without inspection lot origin or inspection type.
Regards
Sujit -
BAPI for creation of subcontract PO
Hi all,
Currently iam doing a BAPI for creation of subcontract Purchase Order using the BAPI_PO_CREATE1. But in this BAPI iam unable to find the table for entering Components.
Regards,
Sun.Hi,
I wil give you how to fill the components of PO items, it is a sample code;
*zPoHeader
if kna1-kunnr eq 'BOR020'.
zpoheader-comp_code = '0040'.
endif.
if kna1-kunnr eq 'BOR040'.
zpoheader-comp_code = '0048'.
endif.
zpoheader-doc_type = 'ZSA'.
zpoheader-doc_date = mkpf-budat.
zpoheader-vendor = 'BOR050'. "şimdilik
zpoheader-pmnttrms = 'Z030'.
zpoheader-purch_org = '1100'.
zpoheader-pur_group = '101'. "malzeme ÜZERINDEKI marc-ekgrp
zpoheader-currency = zsaleshead-waers.
zpoheader-item_intvl = 10.
zpoheaderx-comp_code = 'X'.
zpoheaderx-doc_type = 'X'.
zpoheaderx-vendor = 'X'.
zpoheaderx-purch_org = 'X'.
zpoheaderx-pur_group = 'X'.
zpoheaderx-currency = 'X'.
zpoheaderx-doc_date = 'X'.
zpoheaderx-pmnttrms = 'X'.
zpoheaderx-item_intvl = 'X'.
*zPoitem
loop at i_posnr.
lv_ebelp = lv_ebelp + 10.
zpoitem-po_item = lv_ebelp.
zpoitem-material = i_posnr-matnr.
if kna1-kunnr eq 'BOR020'.
zpoitem-plant = '0040'.
zpoitem-stge_loc = '4001'.
endif.
if kna1-kunnr eq 'BOR040'.
zpoitem-plant = '0048'.
zpoitem-stge_loc = '4801'.
endif.
zpoitem-quantity = i_posnr-menge.
zpoitem-po_unit = i_posnr-meins.
zpoitem-net_price = i_posnr-bfiyat.
zpoitem-price_unit = 1.
zpoitem-tax_code = 'V0'.
zpoitemx-po_item = lv_ebelp.
zpoitemx-po_itemx = 'X'.
zpoitemx-material = 'X'.
zpoitemx-plant = 'X'.
zpoitemx-stge_loc = 'X'.
zpoitemx-quantity = 'X'.
zpoitemx-po_unit = 'X'.
zpoitemx-net_price = 'X'.
zpoitemx-price_unit = 'X'.
zpoitemx-tax_code = 'X'.
append: zpoitem, zpoitemx.
clear : zpoitem, zpoitemx.
endloop.
call function 'BAPI_PO_CREATE1'
exporting
poheader = zpoheader
poheaderx = zpoheaderx
tables
return = zreturn3
poitem = zpoitem
poitemx = zpoitemx.
Send me your results,
Kenan. -
BAPI for Creation of Maintenance Plan (TCode - IP01)
Hello
Kindly help me with the BAPI for Creation of Maintenance Plan (TCode - IP01)
Thanks and Regards
AvishekHi
Check Tcode: IBIP. and LSMW method and below link it may be helpful.
[link|Re: LSMW for uploading equipment.]
Thanks,
Asit Purbey. -
BAPI for Creation of the Project in ECC using Standard Templates
Hi,
I want BAPI for Creation of the Project in ECC using project id and project standard template ID
and BAPI for Updating of project and WBS element using project id and WBS element IDOne idea is to write a wrapper FM that is remote enabled and internally call BBP_PD_CTR_CREATE for your own use.
-
BAPI's for creation of sub Contract with reference to main contract
Hi,
Can any body tell me the available bapi for the creation zlsl contract with reference to main contract zgsl
Regards
Rajkumar1.Logistics--Materials Management--Purchasing ---Purchase Requisition --Follow-on functions --- Assign and Process
2.ME57
3.Select the Assigned Purchase Requisitions checkbox if you also want to see requisitions already assigned, and choose Execute.
4.On the Assign and Process Purchase Requisitions screen, select the requisition lines for your material.
5.Choose Assign Manually if the info record already exists.
6.On the pop-up Assign Source of Supply Manually dialog box, make the following entries:
Agreement 46XXXXX Agmt item 10
7.Choose Assign Source of Supply.
For assign the source of supply, you can also choose Assign Automatically (only if not already assigned by MRP due to existing source list). If more than one source exists, select the contract in the Source Overview for Purchase Requisition 100XXXXX window and confirm with Enter.
When assigning a source, make sure to select the contract.
8.Choose Save.
9.Select the line item, and then choose Assignments Overview (SHIFT+F5).
10.On the Assign and Process Requisitions: Overview of Assignments screen, select the line below Vendor (you can only select one at a time), then choose Process Assignment.
11.On the Process Assignment: Create PO window, check and make sure the Order Type (NB), Purchasing Group and Purch. Organization fields then choose Continue (Enter) to confirm.
12.On the Create Purchase Order screen, select the requisition in the Document Overview section and choose Adopt in the left part of the Document Overview screen.
13.Choose Save. -
Bapi for creation of equipment master
hi friends ,
I have to made a BDC program for creation of equipment master .
for that I am using bapi i.e. ' BAPI_EQUI_CREATE '.
I had matched the fields of transaction IE01 but in the additinal data part i could not able to map 'Partner' fields .
pls some body can guide what should i do for it.Hi Das,
If u r going to create equipment no against this Bapi BAPI_EQUI_CREATE"
then u need to pass material no, Equipment type, Serial No. there is no need to give partner no .
If its good, then plz give point. -
BAPI for Automatic Good Recipt refer to Service Entry Sheet
Hello Experts,
I need to create an automatic GR document after the SES creation/acceptance through importing time sheets from CATS to MM-SRV using transaction CATM. When doing so, the service entry sheet is created and after the acceptance is automatically set by the EXIT_SAPLMLSR_010, but the GR document is not created. Is there a BAPI for the automatic creation of the GR document?
Thank you
Mario F.Hi,
I think you should check this in ML81N. You try to post and check the error there. Not all the errors are reported back in you scenario.
cheers,
Sanjeev -
BAPI for creation of material documents/movements
Hi Everebody:
I need some help regarding to bapis for the creation of mateial documents and/or movements. I have been trying to implement bapi BAPI_GOODSMVT_CREATE, but this bapi does not have (import) the posting time in document, which is very important for my porpuse.
So, I would appretiate a lot any information anybody could give about any bapi I could use to create material documents or material movements but incluidng the posting time in document (field MKPF-OIB_BLTIME).
RegardsYou can check MB_CREATE_GOODS_MOVEMENT which has mkpf as inporting parameter.
-
BAPI for creation of Authorization Objects in BI 7.0
Hi BW Gurus,
Greetings!!!
Is there any BAPI Available for creation of Authorization Objects in BI 7.0.
The data will be transferred through flatfiles.
Kindly provide me the info as earliest as possible.
Best Regards,
PriyaGot the Workaround...
Priya -
Hi Freinds,
I need to trigger the creation of a stock from a BAPI.
So in MIGO i am using movement type 501 and type as Others.
I could see a bapi BAPI_GOODSMVT_CREATE for that .But in the checktable for the tcodes t158g , i could not find MIGO.So i doubt if i can use this BAPI for the creation of a stock.
Please let me know if there is a BAPI for the creation of stocks.
Thanks and Regards,
AnoopHello,
Use the belwo bapi.
BAPI_WHSE_TO_CREATE_STOCK
Reward if helps.
Thanks,
Krishna -
BAPI for creation of Equipment BOM
Which BAPI is used for creation of Equipment BOM?
Hi,
Check this Code, it works:
DATA ecsin TYPE csin.
DATA estkob TYPE stkob .
DATA estzub TYPE stzub .
DATA astlnr TYPE stzub-stlnr .
DATA t_stpob TYPE STANDARD TABLE OF stpob WITH HEADER LINE .
PARAMETERS: pa_equnr TYPE equnr DEFAULT '1500037'. "Your Equipment.
START-OF-SELECTION.
ecsin-equnr = pa_equnr.
ecsin-stlty = 'E' .
ecsin-stlan = '4' .
ecsin-werks = 'C002'. "Your Plant.
ecsin-datuv = '20130101'.
estkob-bmein = 'ST'.
estkob-bmeng = 1.
estkob-stktx = 'TEST'.
t_stpob-stlty = 'M' .
t_stpob-postp = 'L' .
t_stpob-idnrk = '000000000040002882'. "Your Component.
t_stpob-meins = 'ST' .
t_stpob-menge = 1 .
t_stpob-rvrel = 'X' .
APPEND t_stpob .
t_stpob-menge = 2.
t_stpob-idnrk = '000000000040002877'. "Your Component.
APPEND t_stpob.
CALL FUNCTION 'CSAI_BOM_CREATE'
EXPORTING
ecsin = ecsin
estkob = estkob
estzub = estzub
* FL_NO_CHANGE_DOC = ' '
* FL_COMMIT_AND_WAIT = ' '
* FL_NO_COMMIT_WORK = ' '
* FL_ALE = ' '
IMPORTING
* FL_WARNING =
astlnr = astlnr
TABLES
t_stpob = t_stpob
EXCEPTIONS
error = 1
OTHERS = 2.
IF astlnr IS INITIAL.
****ERROR.
ENDIF.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Sergio. -
Bapi for creation media product family
hi friends ,
Is there any bapi exist for creation of media product family.Hi sandipan,
for creation of media product family there is no bapi.acually how bapi's are nothing but api methods or transactions.
the business object for productcatalog is BUS1071.
go to SWO1(its not zero) and check this .
they assigned a transaction WWM1 to create productcatalog.
reward points if helpful. -
BAPI for creation of Purchasing info record
Hi SAPians,
Greetings......
Can you help me out in giving the BAPI for the creation of Purchasing Info record (ME11) .
Thanks in advance,
Lekha.Hi ,
You people have suggested me to use RM06IBI0 this program.
I want to know in what way it can help me.
Thankyou in advance,
Lekha.
Maybe you are looking for
-
Is there a way to auto disable out of stock variations or add Out of Stock to the dropdown
Hi, I have read this article regarding the variation options - (Updated) Product inventory control for attributes (beta) While it is great that you can auto remove disabled options from the dropdown menu, it seems pointless to be able to do this if a
-
Hello, I know you can add links and bookmarks within a pdf, that will take you to other areas of that particular pdf. However, I need to put a link or bookmark into a pdf that will allow a user to click on a link in Captivate, Flash, Dreamweaver, et
-
I have been trying to send some pics to another email account. I never had any trouble with sending pics before and now all of a sudden since Firefox updated the last time I am having trouble. When I am on Google I have to use there classic uploader
-
I am finishing up my first photo book. I have not seen yet an option to put a title on the spine of the book. Is there going to be such an option before hitting the purchase button? I am doing the extra large size 13x10.
-
On the website activity page does the time stamp of a phone call and message show up as the time zone where the call is placed or received. Specifically, on my family plan one user is in Central Time Zone about 75 percent of the time. If the person