BAPI for Creation Of Catalog Profile - TCODE OQN6

Hi All,
Is there any BAPI to create the catalog profile (like Catalog Groups & Codes BAPI - BAPI_QPGR_SAVEREPLICA ).
Reagrds,
Sridhar.M

Hi
   Check Tcode: IBIP. and LSMW method and below link it may be helpful.
[link|Re: LSMW for uploading equipment.]
Thanks,
Asit Purbey.

Similar Messages

  • BAPI for Creation of Maintenance Plan (TCode - IP01)

    Hello
    Kindly help me with the BAPI for Creation of Maintenance Plan (TCode - IP01)
    Thanks and Regards
    Avishek

    Hi
       Check Tcode: IBIP. and LSMW method and below link it may be helpful.
    [link|Re: LSMW for uploading equipment.]
    Thanks,
    Asit Purbey.

  • BAPI for Creation of inspection lot

    I have two scenario:-
    1.Can any body help to find BAPI for creation of Inspection lot for the material under PO envisaged for PDI.
    2. Can any body find me a BAPI or FM which can creates inspection lot in QALS table without inspection lot origin under 01 i.e. 0101 or Z01SI01.
    My objective is to creation inspection lot without assigning Inspection type of Z01SI01 or Z01SI02 and so on in the material code under a respective Plant 1004 or 1005 0r 1006 so on.
    In my Z Development for creation of inspection lot BDC is run for QA01 as this code created inspection lot on when material code has inspection type Z01SI01 i.e. location of source inspection and vendr code particular classification under 010 vendor class inspection type Z01SI01. System search both the inspection type for both material and vendor then create inspection lot in QALS table by assiging inspection matching inspection on the lot.
    I want to get rid of assignment of inspection on the materilal. If any BAPI or FM is avalable for creation of inspection without assigning inspection type on material code. I want to create inspection lot in which Inpsection type assignment can be done based on vendor class only.
    YPB

    2. Can any body find me a BAPI or FM which can creates inspection lot in QALS table without inspection lot origin under 01 i.e. 0101 or Z01SI01.
    I am very sure that this is not possible.You can not create inspection lot without inspection lot origin or inspection type.
    Regards
    Sujit

  • BAPI for creation of subcontract PO

    Hi all,
       Currently iam doing a BAPI for creation of subcontract Purchase Order using the BAPI_PO_CREATE1. But in this BAPI iam unable to find the table for entering Components.
    Regards,
    Sun.

    Hi,
    I wil give you how to fill the components of PO items, it is a sample code;
    *zPoHeader
      if kna1-kunnr eq 'BOR020'.
        zpoheader-comp_code   = '0040'.
      endif.
      if  kna1-kunnr eq 'BOR040'.
        zpoheader-comp_code   = '0048'.
      endif.
      zpoheader-doc_type    = 'ZSA'.
      zpoheader-doc_date    = mkpf-budat.
      zpoheader-vendor      = 'BOR050'. "şimdilik
      zpoheader-pmnttrms    = 'Z030'.
      zpoheader-purch_org   = '1100'.
      zpoheader-pur_group   = '101'. "malzeme ÜZERINDEKI marc-ekgrp
      zpoheader-currency    = zsaleshead-waers.
      zpoheader-item_intvl  = 10.
      zpoheaderx-comp_code  = 'X'.
      zpoheaderx-doc_type   = 'X'.
      zpoheaderx-vendor     = 'X'.
      zpoheaderx-purch_org  = 'X'.
      zpoheaderx-pur_group  = 'X'.
      zpoheaderx-currency   = 'X'.
      zpoheaderx-doc_date   = 'X'.
      zpoheaderx-pmnttrms   = 'X'.
      zpoheaderx-item_intvl = 'X'.
    *zPoitem
      loop at i_posnr.
        lv_ebelp = lv_ebelp + 10.
        zpoitem-po_item    =  lv_ebelp.
        zpoitem-material   = i_posnr-matnr.
        if kna1-kunnr eq 'BOR020'.
          zpoitem-plant      = '0040'.
          zpoitem-stge_loc   = '4001'.
        endif.
        if kna1-kunnr eq 'BOR040'.
          zpoitem-plant      = '0048'.
          zpoitem-stge_loc   = '4801'.
        endif.
        zpoitem-quantity   = i_posnr-menge.
        zpoitem-po_unit    = i_posnr-meins.
        zpoitem-net_price  = i_posnr-bfiyat.
        zpoitem-price_unit = 1.
        zpoitem-tax_code   = 'V0'.
        zpoitemx-po_item    = lv_ebelp.
        zpoitemx-po_itemx   = 'X'.
        zpoitemx-material   = 'X'.
        zpoitemx-plant      = 'X'.
        zpoitemx-stge_loc   = 'X'.
        zpoitemx-quantity   = 'X'.
        zpoitemx-po_unit    = 'X'.
        zpoitemx-net_price  = 'X'.
        zpoitemx-price_unit = 'X'.
        zpoitemx-tax_code   = 'X'.
        append: zpoitem, zpoitemx.
        clear : zpoitem, zpoitemx.
      endloop.
      call function 'BAPI_PO_CREATE1'
        exporting
        poheader                     = zpoheader
        poheaderx                    = zpoheaderx
    tables
       return                       = zreturn3
       poitem                       = zpoitem
       poitemx                      = zpoitemx.
    Send me your results,
    Kenan.

  • Bapi for creation of a contract against services.

    Hi.
    i just want to know the correct bapi for creation of contracts against services..here i was tried with BAPI_CONTRACT_CREATE but the documentation says that it is not supported for exxternal or internal services.
    so iam not sure if this bapi is the one for contract creation for services.
    any way i was tried to test this function module but i havent got  Contract created.
    wil be waiting for an excellent answer.
    bye.
    reegards.
    seetaram.

    Hi Ram,
    Try the function module
    BAPI_CONTRACT_CREATEFROMDATA.
    Once you create the contract, update the technical objects for the contracts
    using two function modules called one after another.
    IWOL_WV_ADD_OBJECTS
    IWOL_WV_POST_OBJECT_LIST
    Regards,
    Chandra Sekhar

  • BAPI for Creation of the Project in ECC using Standard Templates

    Hi,
    I want BAPI for Creation of the Project in ECC using project id and project standard template ID
    and BAPI for Updating of project and WBS element  using  project id and WBS element ID

    One idea is to write a wrapper FM that is remote enabled and internally call BBP_PD_CTR_CREATE for your own use.

  • BAPI for Creation of Stock

    Hi Freinds,
    I need to trigger the creation of a stock from a BAPI.
    So in MIGO i am using movement type 501 and type as Others.
    I could see a bapi BAPI_GOODSMVT_CREATE for that .But in the checktable for the tcodes t158g , i could not find MIGO.So i doubt if i can use this BAPI for the creation of a stock.
    Please let me know if there is a BAPI for the creation of stocks.
    Thanks and Regards,
    Anoop

    Hello,
    Use the belwo bapi.
    BAPI_WHSE_TO_CREATE_STOCK
    Reward if helps.
    Thanks,
    Krishna

  • BAPI for creation of material documents/movements

    Hi Everebody:
    I need some help regarding to bapis for the creation of mateial documents and/or movements. I have been trying to implement bapi BAPI_GOODSMVT_CREATE, but this bapi does not have (import) the posting time in document, which is very important for my porpuse.
    So, I would appretiate a lot any information anybody could give about any bapi I could use to create material documents or material movements but incluidng the posting time in document (field MKPF-OIB_BLTIME).
    Regards

    You can check MB_CREATE_GOODS_MOVEMENT which has mkpf as inporting parameter.

  • Bapi for creation of equipment master

    hi friends ,
    I have to made a BDC program for creation of equipment master .
    for that  I am using bapi i.e. ' BAPI_EQUI_CREATE '.
    I had matched the fields of transaction IE01 but in the additinal data part i could not able to map 'Partner' fields .
    pls some body can guide what should i do for it.

    Hi Das,
    If u r going to create equipment no against this Bapi BAPI_EQUI_CREATE"
    then u need to pass material no, Equipment type, Serial No. there is no need to give partner no .
    If its good, then plz give point.

  • BAPI for creation of Authorization Objects in BI 7.0

    Hi BW Gurus,
    Greetings!!!
    Is there any BAPI Available for creation of Authorization Objects in BI 7.0.
    The data will be transferred through flatfiles.
    Kindly provide me the info as earliest as possible.
    Best Regards,
    Priya

    Got the Workaround...
    Priya

  • FM or BAPI for adding/removing maintenance items(Tcode IP02).

    Hello All,
    I need to change Maintenance plan by adding/removing maintenance items(Tcode IP02). Please let me know availaible FM or BAPI for the same.
    Regards,
    Vimal

    Hi,
    use the following steps to find a BAPI for any transaction
    1.Open transaction SE24.
    2.Now open the object CL_EXITHANDLER in display mode.
    3.Go to the method tab and double click on the method GET_INSTANCE.
    4.Put a break point on cl_exithandler=>get_class_name_by_interface.
    5.Now execute the transaction you want to find BAPI for, it will take you to the above method.
    6.Write EXIT_HANDLER in fieldnames and hit enter, it will tell you the BAPI used for your transaction.
    7.Hit F8 and it will tell you all the BAPIu2019s for your transaction.
    some of the FM's are
    PM_MHIS_UPDATE
    MEASUREM_POINT_UPD_PYEAR
    Regards,
    Manish

  • Standard remote enabled bapi for creation of purchaser contract in srm

    Hello Friends
    Plz tell me is there any standard,remote enabled FM/BAPI in SRM system for creation of purchaser contract.
    I found BBP_PD_CTR_CREATE. But this is normal FM.
    I need BAPI like BAPI_CONTRACT_CREATE which there in ECC system.
    Plz help.
    Thanks & regards,

    One idea is to write a wrapper FM that is remote enabled and internally call BBP_PD_CTR_CREATE for your own use.

  • BAPI  for  creation of Equipment BOM

    Which BAPI is used for creation of Equipment BOM?

    Hi,
    Check this Code, it works:
    DATA ecsin  TYPE csin.
    DATA estkob TYPE stkob .
    DATA estzub TYPE stzub .
    DATA astlnr TYPE stzub-stlnr .
    DATA t_stpob TYPE STANDARD TABLE OF stpob WITH HEADER LINE .
    PARAMETERS: pa_equnr TYPE equnr DEFAULT '1500037'. "Your Equipment.
    START-OF-SELECTION.
       ecsin-equnr = pa_equnr.
       ecsin-stlty = 'E' .
       ecsin-stlan = '4' .
       ecsin-werks = 'C002'. "Your Plant.   
       ecsin-datuv = '20130101'.
       estkob-bmein =  'ST'.
       estkob-bmeng = 1.
       estkob-stktx = 'TEST'.
       t_stpob-stlty = 'M' .
       t_stpob-postp = 'L' .
       t_stpob-idnrk = '000000000040002882'. "Your Component.
       t_stpob-meins = 'ST' .
       t_stpob-menge = 1 .
       t_stpob-rvrel = 'X' .
       APPEND t_stpob .
       t_stpob-menge = 2.
       t_stpob-idnrk = '000000000040002877'. "Your Component.
       APPEND t_stpob.
       CALL FUNCTION 'CSAI_BOM_CREATE'
         EXPORTING
           ecsin                    = ecsin
           estkob                   = estkob
           estzub                   = estzub
    *   FL_NO_CHANGE_DOC         = ' '
    *   FL_COMMIT_AND_WAIT       = ' '
    *   FL_NO_COMMIT_WORK        = ' '
    *   FL_ALE                   = ' '
         IMPORTING
    *   FL_WARNING               =
           astlnr                   = astlnr
         TABLES
           t_stpob                  = t_stpob
         EXCEPTIONS
           error                    = 1
           OTHERS                   = 2.
       IF astlnr IS INITIAL.
    ****ERROR.
       ENDIF.
       IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
       ENDIF.
    Regards,
    Sergio.

  • BAPI for update field marc-profil (backfl.profile, mrp4)

    G'day!
    What bapi will update field marc-profil (backfl.profile, mrp4)?
    Thank you!

    Anupam Sharma wrote:
    You can use the T code MM17/ MASS for your requirement .
    BAPI need for transfer data from non SAP PLM system.

  • BAPI for uplaod Qualification catalog using PP03

    Dears,
    Can anybody please let me know the BAPI to be used for uploading Qualification catalog thruogh transaction code PP03.
    Regards
    Mujeeb

    Check this may be useful .
    BAPI_HRMASTER_SAVE_REPL_MULT
    Rhea.

Maybe you are looking for

  • What sequence settings should I use with multiple formats?

    I'm starting a new project in CS6 that's using multiple types of video.  I've got old camcorder video from 20 years ago...as well as digital video...and current HD video.  I want all the video in the sequence to output as full screen.  So do I need t

  • Amarok and an Ipod

    I finally got fed up with the slow scrolling on itunes and am trying to learn how to use amarok. One question: Can I get amarok to import an audio CD into the ipod format? Will it look up the CD track info on the web? Are itunes files smaller than MP

  • IBook g3 trackpad not working

    Hi. The trackpad on my iBook G3 works intermittently. When it isn't working I can still move the cursor slightly (half an inch with what seems like five minutes of furious effort) and the "click" part of the trackpad works. I tried using a USB mouse,

  • BUG in purging sql history entries...

    Hi folks, I am using 1.5 and have been using also the versions before. Great that the sql-history window is dockable now, much more useful this way...But... it is still totally ununderstanble to me, with wich rule entries in the sql-history are being

  • Importing .pst files from Outlook to Enourage2004

    Hi everyone, I am looking for the easiest way to help my mother-in-law transfer over her PC files to her brand new MacBook (1.83Ghz Intel Duo)- she is a first time Mac user. I personally have little experience using Entourage, so I am trying to find